Related
I've got busybox installed properly, it's Stericson's, I've checked if it's working and it is, I have given root permission to V4A and I have plenty of space for the drivers to be installed. I'm on a rooted h959 15e image, I'm not really willing to revert back to previous software versions, and I'm stuck with this problem. The exact message I get is "Driver install failed: The busybox installation found on your device does not work. This usually means you installed a wrong or broken busybox. V4A needs Stericson's busybox to work. If you are sure you installed busybox properly, then please confirm your device has been completely rooted". But it is rooted, I can access all types of root-only things like xposed and root booster. SELinuxModeChanger is set to permissive, I have tried with both V4A apps from the DXA thread and from the (not the FX one) one in Google Play, and I have already tried uninstalling and installing everything, and I have also tried reflashing my rooted_system.img countless times. So root is working, busybox is working, SELinuxModeChanger is properly set up, why isn't it working? Also I noticed something, when I reboot my phone, SELinuxModeChanger changes the SELinux mode back to enforcing, but if I turn on the option to show a notification after the mode changes, the notification IS showed, so it must mean it's working, right? I have tried before without poweramp and dolby atmos, but as of now I'm using both. I don't even know if V4A will work with Atmos and Poweramp (Atmos and Poweramp do work together, though), but I just need to try it, even if it means uninstalling atmos. So I'm completely out of options. The only thing that I can think of is if there's a way to manually install the drivers (latest updated/updatable super audio quality ones), but I don't know if that's possible. So anyway, can anyone help me with this?
You should flash a zip from this site: http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137. I used this: http://forum.xda-developers.com/attachment.php?attachmentid=3667403&d=1456929089, and it works. Of course, flashfire v0.24 is required.
jst8 said:
You should flash a zip from this site: http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137. I used this: http://forum.xda-developers.com/attachment.php?attachmentid=3667403&d=1456929089, and it works. Of course, flashfire v0.24 is required.
Click to expand...
Click to collapse
I'm flashing the zip file viper|atmos 5.5 sony beats edition with flashfire 0.50, and nothing's happening. Again, SELinux mode is permissive and busybox is installed, but atmos app and viper app won't show up, and when installing the app from the playstore, it says the driver is not installed. Help, please?
Iron_Overheat said:
I'm flashing the zip file viper|atmos 5.5 sony beats edition with flashfire 0.50, and nothing's happening. Again, SELinux mode is permissive and busybox is installed, but atmos app and viper app won't show up, and when installing the app from the playstore, it says the driver is not installed. Help, please?
Click to expand...
Click to collapse
1. First, install ViPER4Android apk from the official site: http://forum.xda-developers.com/showthread.php?t=2191223. You can choose between the old (v2.3.4.0) and new (v2.4.0.1) version.
2. Then flash a zip from this site: http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137. I used "ViPERAudio 5.4 Stock.zip" (compatible with V4A v2.4.0.1). You can also choose "ViPERAudio 4.7.1 Stock.zip", if you have V4A v2.3.4.0 installed. I didn't try other mods (such as "viper|atmos 5.5 sony beats edition"), so I don't know if they work.
3. For flashing, you have to use FlashFire v0.24, other versions don't work with the device. Link: http://flashfireapk.com/flashfire-0.24.apk.
* Also, you don't have to change SELinux.
Thanks
jst8 said:
1. First, install ViPER4Android apk from the official site: http://forum.xda-developers.com/showthread.php?t=2191223. You can choose between the old (v2.3.4.0) and new (v2.4.0.1) version.
2. Then flash a zip from this site: http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137. I used "ViPERAudio 5.4 Stock.zip" (compatible with V4A v2.4.0.1). You can also choose "ViPERAudio 4.7.1 Stock.zip", if you have V4A v2.3.4.0 installed. I didn't try other mods (such as "viper|atmos 5.5 sony beats edition"), so I don't know if they work.
3. For flashing, you have to use FlashFire v0.24, other versions don't work with the device. Link: http://flashfireapk.com/flashfire-0.24.apk.
* Also, you don't have to change SELinux.
Click to expand...
Click to collapse
Thank you very much, friend, I'm gonna try your method right now. Just one question, why doesn't flashfire 0.50 work with the g flex 2? I flashed Xposed with it and it worked. Isn't 0.24 an older version?
How do you test the benefits?
Iron_Overheat said:
Thank you very much, friend, I'm gonna try your method right now. Just one question, why doesn't flashfire 0.50 work with the g flex 2? I flashed Xposed with it and it worked. Isn't 0.24 an older version?
Click to expand...
Click to collapse
Actually, I don't know. I've read somewhere that v0.24 is the only working version for our flex 2. I didn't want to brick my device, so I used v0.24. I've had no problems with it so far.
soosoolhastam said:
How do you test the benefits?
Click to expand...
Click to collapse
I'm just going to play my flacs and listen to them while tuning v4a to my liking.
jst8 said:
Actually, I don't know. I've read somewhere that v0.24 is the only working version for our flex 2. I didn't want to brick my device, so I used v0.24. I've had no problems with it so far.
Click to expand...
Click to collapse
I've tried with version 0.24 and it didn't work either. I'm gonna test the g flex 2 flash mod (the one with g4 tweaks and etc) with flashfire 0.24, since it says to use that version and it didn't work flashing it with 0.50, and if it still doesn't work for me, I'll revert back to 0.50, since it worked flashing dolby atmos (seperate from viper4audio, but the viper4audio-only zip file didn't flash). I fixed my problem of drivers not installing, so I'll just install atmos again and install the v4a drivers through the app. But thank you all for your help, really . If I menage to get all the mods I have working, I'll make a thread so that H959 rooted 15e image users can enjoy the best experience in their G flex 2.
maybe you never get viper4 to work in GF2...i did it many times with diferent methods and never never get it to work...even use the flashfire 0.24 (the only working to install zips on GF2) you never get a driver to work!
i recomend to you install Dolby Atmos see Apps section in this forum of GF2...the Dolby Atmos works like a charm and do the good job as Viper4.
(i am not sure but because of architeture of the SD810 Viper4 the latest version never will work on our device!)
That's strange... I'm on H955 v15c, V4A 2.4.0.1 with "ViPERAudio 5.4 Stock.zip" installed using FlashFire v0.24.
Everything works.
copy2050 said:
maybe you never get viper4 to work in GF2...i did it many times with diferent methods and never never get it to work...even use the flashfire 0.24 (the only working to install zips on GF2) you never get a driver to work!
i recomend to you install Dolby Atmos see Apps section in this forum of GF2...the Dolby Atmos works like a charm and do the good job as Viper4.
(i am not sure but because of architeture of the SD810 Viper4 the latest version never will work on our device!)
Click to expand...
Click to collapse
Everyone... I... I... I FINALLY GOT TO GET ALL THE MODS I WANTED TO WORK!! *dances frenetically* :laugh::laugh::laugh::victory: I'm gonna make a thread so that every user with a h959 G Flex2 can enjoy this tuned experience I achieved! Thank you all for your help! If you guys are interested in knowing what mods I managed to make work on the latest software version of the G Flex2 (that is, on the h959 ones), keep an eye on the thread I'm about to make! *celebrates into oblivion* (erm... this is embarassing... I'm a newbie here and... um... how exactly do I "close" or delete this thread? I mean, my problem is solved so... what do I do?
Install busybox from google play, set selinux to permissive and You guys have to uncheck an option on supersu app. Option named "namespace separation". After uncheck that option reboot phone and try to install viper driver again.
/////
THIS GUIDE WAS FROM THE NOVEMBER SECURITY PATCH ON NOUGAT!!! DO NOT DO THIS IF YOU ARE ON OREO CAUSE YOU WILL LOSE ALL SOUND!
IF YOU WOULD LIKE TO USE VIPER ON OREO/PIE DEVICES. PLEASE USE THE MAGISK MODULE AND/OR FIND A BETTER GUIDE WITH A COMPATIBLE ZIP
//////
Okay I have confirmed that sound mods work on the Moto z2 force with no issues whatsoever many probably know that
How to Install:
1.
make sure you have root and TWRP installed on your Moto Z2 force
2.
download this version of A.R.I.S.E.
https://androidfilehost.com/?fid=457095661767141554
3.
Place the zip file in the Internal storage of your device (so its easy to find)
4.
Boot into TWRP recovery and click install
5.
Find the file you put in your internal storage named;
ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip
And then swipe to install
6
An install wizard should appear and assuming that you haven't used this before select easy mode on the wizard and make sure you have it set to "install core engine then modules" and spam the hell out of the next button besides those 2 things
7.
TWRP screen should appear and you should boot into your device like normal
8.
ENJOY
SOME NOTES:
A.R.I.S.E AM3D DOES NOT WORK BUT OTHER THAN THAT EVERYTHING ELSE IS FINE
Update: DO NOT ATTEMPT TO INSTALL MAGNUM OPUS IT WILL FAIL
!!!!DISCLAIMER!!!!!
-I AM NOT RESPONSIBLE FOR A INCREASE IN GAS PRICES GETTING CHEATED ON BY YOUR WIFE OR A BRICKED DEVICE
Man.. I was going to try ARISE, but with all the concerns that I couldn't restore a nandroid because of data partition encryption, I just said screw it and I installed the v4a 2.3.4 module right from Magisk, and it works great with both USB Type-C to 3.5mm and Bluetooth.
I don't know if anyone's noticed or not, but Oreo has an entire section on Bluetooth audio protocol under the development options. Things like sample rate, bit rate, etc etc. I do know that v4a works with all protocols (SBC, AAC, aptX, aptX HD and LDAC), but if you up the sample rate to 96khz, it will NOT process. I usually use 48khz and it sounds great.
I installed arise and lost all audio on device . I don't know if it's a setting or something in aroma I should not have added or if it's viper settings I messed with .
I need to uninstall this how do I
Or how do I get sound back this is weird
joesee said:
Man.. I was going to try ARISE, but with all the concerns that I couldn't restore a nandroid because of data partition encryption, I just said screw it and I installed the v4a 2.3.4 module right from Magisk, and it works great with both USB Type-C to 3.5mm and Bluetooth.
Are you on Oreo 8.0 running V4A? Thanks!
Click to expand...
Click to collapse
climbhigh77 said:
Are you on Oreo 8.0 running V4A? Thanks!
Click to expand...
Click to collapse
Yes sir, I am. Since I got it working, I haven't touched anything in fear that it'll stop working. I haven't even made a nandroid. Twrp isn't installed, I just booted in it from adb.
Right on! I was also advised not to install TWRP. I flashed it and it seems to be working so far. Having other issues though like my camera and flash (flashlight) don't work now since installing magisk or the v4a which one I'm not sure but I assume magisk.
3/12/18 Update: camera and Flash are working properly now after a wipe Dalvik, cache and reboot.
Is anyone else having issues with viper4android working intermittently on Oreo? Sometimes it works but mostly it doesn't and I have no way to control it, toggling the switches does nothing and it doesn't matter if I reboot or not. It does work sometimes so I know the drivers are installed, and I've tried a fresh install a few times using the 2.3.4 version and the newest 5.0 version which produces the same result.
Is there a setting in magisk or Viper that I need to apply to to get it working seamlessly? I have systemless hosts check-in magisk already for ad blocking. There's got to be something I'm missing here. Any help is greatly appreciated thanks!
I was having this situation, the I disabled the music FX and it's gone for now
Flashlight stops because of selinux
Dolby Atmos for oreo works fine without any problems. You just have to find the working version in the last few pages of the mod thread.
Was able to get the latest ARISE, plus V4A, and Dolby ATMOS Oreo from guitardedhero working. I'm using SuperSU as I'm not a fan of Magisk. Flashed the latest ARISE, including the V4A 2.5.0.5. Crap, I made sure V4A opened and checked that the drivers were installed. But I may have flashed the ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk over the ARISE loaded v4a apk....? Try to see if the loaded apk works first. If not, flash Nougat_IO_test_fix.apk over: ViPER4Android_FX_v2505.zip Anyway, use this to set permissive: The.SELinux.Switch.ver.6.0.3.build.603.apk. Reboot. ARISE libs will be there and V4A should work. Sometimes you have to turn off the main power button for the V4A mod, go up to the corner button and exit. Clear out anything in recents. Then open V4A back up, and enable the power button. If music is playing, you will hear the change.
Ok.....Dolby. Go HERE and download the normal zip. Thank the dude, he's done a lot for us audiophiles. Flash it. Reboot. Apps will be there, and will likely forceclose. You have to extract the dolby zip and copy the libs from the dolby/lib and dolby/lib/soundfx files and paste them in the related folders in root /system/vendor and system/vendor/soundfx. You need to set the permissions to rw-r-r (644). Now save/reboot. Apps should work. I'm betting other libs/files weren't installed either, but just those got Atmos working, working well. Still looking through things and will verify later what else wasn't placed.:good:
Quick Question, I have used ARISE and Viper before and really like them but this is a Software Mod. I would just like to clarify that this Software Mod works on the actual Hardware Mod and if it does, does this Software Mod work on the Hardware Mod using a Custom ROM or Kernal? Can anyone confirm that yet?
androidddaaron said:
I installed arise and lost all audio on device . I don't know if it's a setting or something in aroma I should not have added or if it's viper settings I messed with .
I need to uninstall this how do I
Or how do I get sound back this is weird
Click to expand...
Click to collapse
Sorry about this... You may have to back up your internal then flash back to stock. This guide was from when our device was still on nougat. For Oreo I need you to install the module from MAGISK or find the magnum opus zip
How to flash viper4android with magisk on android oreo.
I have failed to install driver viper4android on android oreo.
newyesor said:
How to flash viper4android with magisk on android oreo.
I have failed to install driver viper4android on android oreo.
Click to expand...
Click to collapse
I believe you need a custom or modified kernel with SEL Permissive. Otherwise, even if it installs and runs, I don't think that it will work.
AarSyl said:
I believe you need a custom or modified kernel with SEL Permissive. Otherwise, even if it installs and runs, I don't think that it will work.
Click to expand...
Click to collapse
Can confirm, somewhat. I spent a while getting it running myself, the latest zip from @ahrion works, but for our case some things need to be moved.
For anyone interested in some behind the scenes audio changes; for the O update, our HTC audio effects file and all soundfx folders were moved from system/etc and system/lib to vendor/etc and vendor/lib. This is causing a bit of confusion with some things. When I flashed his zip, I had to move the system/lib/soundfx folder in his module to vendor/lib, go into the htc audio effects file and point the V4A library to vendor instead of system, then create a symlink for vendor as is usually done. I still have to go into developer mode and disable selinux for it to process, though.
https://forum.xda-developers.com/u11/development/kernel-cleanslate-v1-0-t3623310 this kernel does wonders for viper4Android and also make sure your using the latest beta magisk...
Ohhhhhh....you said Oreo, my bad
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
i had the same but then i tried to use the other viper release from magisk and it worked. there is this one called hifi and fx
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
dgunn said:
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
Click to expand...
Click to collapse
that works for like 10 mins and then it gets killed
byReqz said:
that works for like 10 mins and then it gets killed
Click to expand...
Click to collapse
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
dgunn said:
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
Click to expand...
Click to collapse
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
byReqz said:
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
Click to expand...
Click to collapse
I was unaware that you were using the magisk module. I could not get that one to work either
dgunn said:
I was unaware that you were using the magisk module. I could not get that one to work either
Click to expand...
Click to collapse
the normal one doesnt work with viper doewsnt it?
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
TheNetwork said:
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
Click to expand...
Click to collapse
it only works for a few mins that way
I'm using the Android p beta and i don't have the problems with viper as i did with oxygen os 5. it's always processing for my headphones, either plugged in or Bluetooth. the only exception is sometimes after receiving a call while listening to music, after the call is over and my music resumes, viper is no longer processing. not every time though. i used the latest magisk and the viper module in the screenshot.
i also didn't make any changes to conf files, just installed through magisk download. rebooted, opened viper fx, gave it storage permissions and turned it on.
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
TuxRuffian said:
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
Click to expand...
Click to collapse
as i said, idk why but its working now.and im on material now
byReqz said:
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
Click to expand...
Click to collapse
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
reaper000 said:
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
Click to expand...
Click to collapse
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
byReqz said:
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
Click to expand...
Click to collapse
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
reaper000 said:
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
Click to expand...
Click to collapse
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
byReqz said:
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
Click to expand...
Click to collapse
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
reaper000 said:
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
Click to expand...
Click to collapse
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
byReqz said:
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
Click to expand...
Click to collapse
And you replaced the audio_effects.conf file in /system/vendor/etc with the one from the downloaded zip?
(Sorry to belabor the point, but it's not clear to me you tried all that)
received Buds Z for my OP9 purchase and have very slowly converting to the new phone (rooting, stability and assure privacy issues were addressed) and was very happy with their performance with my rooted OP6 on A11-Pixen OS with ViperFX. Without VIper, the sound is lackluster. even a downloadable EQ makes minimal difference.
Attempting to convert fully to OP9 today and installed viperFX mod form magisk but when I attempt to perform the initial launch to download and install the driver, the phone just reboots without actually getting the driver installed. Im not sure if its a hardware compatibility issue or the fact the OP9 root isnt as full and fleshed out like the one on my OP6. (something about DM verify and/or selinux enforcement? idk, I am pretty lame at the deep understanding of android 11s workings)
I know there are a few other magisk mod for audio listed and more that i could possibly find that arent and add myself via zip installation but even if one ends up working, I will still be aiming for VIperFX as my preferred solution.
If anyone has a solution, plz reply (or whatever possible replacement you've chosen)
PS. I swore the buds z touch controls were suppose to be customizable. anyone else unable to set custom controls for them?
In magisk, install "audio modification library". That should fix the driver issue.
To customize the touch controls, go in Settings, bluetooth and device connections, bluetooth, settings cog next to the buds, headphones. Now you can customize them. Not a lot of options though.
You might need to install the oneplus buds app first.
NotTheGiant said:
In magisk, install "audio modification library". That should fix the driver issue.
To customize the touch controls, go in Settings, bluetooth and device connections, bluetooth, settings cog next to the buds, headphones. Now you can customize them. Not a lot of options though.
You might need to install the oneplus buds app first.
Click to expand...
Click to collapse
i tried that and its the same results. No driver found, it installs, force reboots and loops from there. thank you though.
applyscience said:
i tried that and its the same results. No driver found, it installs, force reboots and loops from there. thank you though.
Click to expand...
Click to collapse
Same issue. Tried ACP as well, just gave up on it and using the inferior built-in Atmos
No, but I did install James DSP and it's working just fine.
@applyscience
After alot of trail and error I finally got ViperFX working on my OP9 !
You must install magisk-permissive-script_v1.2 and audio modification library modules in Magisk and of course the ViperFX
Glad you got it working! I wonder why I didn't need to do that
Hopefully it works for everyone else.
Just use JamesDSP. Same functionality as Viper, and works 100% of the time.
Jg1234 said:
@applyscience
After alot of trail and error I finally got ViperFX working on my OP9 !
You must install magisk-permissive-script_v1.2 and audio modification library modules in Magisk and of course the ViperFX
Click to expand...
Click to collapse
Can you tell me how you got it working in more detail? Because this isn't working for me
Okay it randomly worked for me after installing the BusyBox magisk module, then the Audio compatibility module, then the Audio modification module and then viper. After that the driver installed but did not work. After setting the selinux mode to permissive and switching to legacy mode in viper it worked flawlessly.
Im trying for several hours now, i have tried everthing i found including this Thread
(https://forum.xda-developers.com/t/app-fix-100-working-viper4android-for-android-11-devices.4213647/)
Nothing worked for me anyone any idea, i have allready updatet to the latest OxygenOs (11.2.4.4.LE25BA) Maybe thats why it doesnt work?
Domi04151309 said:
Okay it randomly worked for me after installing the BusyBox magisk module, then the Audio compatibility module, then the Audio modification module and then viper. After that the driver installed but did not work. After setting the selinux mode to permissive and switching to legacy mode in viper it worked flawlessly.
Click to expand...
Click to collapse
Did you reboot between the steps? have you installed any audio changing application before?
I'm using james dsp. It does the same and works without problems
noname122414 said:
I'm using james dsp. It does the same and works without problems
Click to expand...
Click to collapse
Can you link to said James dsp? Now I'm curious as to what this is. And if it works as well
Just search inside of magisk it's a standard module and works flawlessly for op9
noname122414 said:
Just search inside of magisk it's a standard module and works flawlessly for op9
Click to expand...
Click to collapse
Does it not need root rights.?But I'm using through by streaming now on way home from work. Very nice
Of course it needs root, magisk without root is kind of pointless.
noname122414 said:
Of course it needs root, magisk without root is kind of pointless.
Click to expand...
Click to collapse
But mine isn't asking for root rights is what I'm saying.
It is a module. Module always have root when it's functional then everything is alright
noname122414 said:
I'm using james dsp. It does the same and works without problems
Click to expand...
Click to collapse
Do you use any presets? If not, are you able to use those?