Related
Hi guys,
I am using the optimized stock rom located here. aaaaawawawaa using BitO-KU kernel. The sound is very low on my Nvidia Shield k1. I have done the tweaks located here. In the thread it says that viper4android makes a big difference as well. When I try to install viper4android I keep getting an I/O error when trying to install the driver. I downloaded SELinux changer but when I launch it I am getting an error in it as well. It says the app was unable to gain root access. I checked in supersu and SELinuxModeChanger does have root access. So I don't understand why it will not work either. In terminal emmulator it says that permissive mode is enabled. Can someone please let me know what I'm doing wrong? I would really like to get viper4android working.
Thank you,
Rocky
1. It isn't good rom, I've had it only two days. Stock kernel is better too.
2. I'm on stock 5.2(K1), rooted with Magisk 14, installed M modules:
V4A 2.0 by ahrion, busybox by osm0sis. V4A works good but I don't need it for speakers. @grimreaper1014
Do you have properly installed busybox?
Just flash Viper4Android using Magisk 14 (its located under downloads tab) and disable AudioFX if you even have that on stock ROM. Then it should work but note that if you get processing error just create a folder named "MagiskManager" and it should work then.
Ok thanks guys. Right now I have SuperSu flashed via recovery. Do I have to remove that somehow to install magisk?
fpozar said:
Just flash Viper4Android using Magisk 14 (its located under downloads tab) and disable AudioFX if you even have that on stock ROM. Then it should work but note that if you get processing error just create a folder named "MagiskManager" and it should work then.
Click to expand...
Click to collapse
I'm doing a clean install. I'm going back to LinageOS. Where do I create the MagiskManager folder at if I need it? Thanks again for your help fellas. I appreciate it greatly.
@grimreaper1014 create the folder in /storage/emulated/0/ in case it doesn't want to install the module. If it goes without any problems then congrats you have working Viper4Android !
(Make sure you disable AudiFX app in lineageOS before you do any flashing)
grimreaper1014 said:
Right now I have SuperSu flashed via recovery. Do I have to remove that somehow to install magisk?
Click to expand...
Click to collapse
If for some reason you (or others) choose this route, you can remove SuperSU (mandatory in order to install Magisk) using the built-in function in the SuperSU app.
---------- Post added at 02:32 PM ---------- Previous post was at 02:25 PM ----------
dzidexx said:
2. I'm on stock 5.2(K1), rooted with Magisk 14, installed M modules:
V4A 2.0 by ahrion, busybox by osm0sis. V4A works good but I don't need it for speakers.
Click to expand...
Click to collapse
Similar setup: stock 5.2 ROM, with Magisk 14, and simply installed the V4A (version 2.0) module by ahrion. I think the module installed busybox (by osm0sis) automatically, as I don't recall doing it myself. But I maybe I'm not remembering that properly.
V4A working great, no messing with SELinux.
/////
THIS GUIDE WAS FROM THE NOVEMBER SECURITY PATCH ON NOUGAT!!! DO NOT DO THIS IF YOU ARE ON OREO CAUSE YOU WILL LOSE ALL SOUND!
IF YOU WOULD LIKE TO USE VIPER ON OREO/PIE DEVICES. PLEASE USE THE MAGISK MODULE AND/OR FIND A BETTER GUIDE WITH A COMPATIBLE ZIP
//////
Okay I have confirmed that sound mods work on the Moto z2 force with no issues whatsoever many probably know that
How to Install:
1.
make sure you have root and TWRP installed on your Moto Z2 force
2.
download this version of A.R.I.S.E.
https://androidfilehost.com/?fid=457095661767141554
3.
Place the zip file in the Internal storage of your device (so its easy to find)
4.
Boot into TWRP recovery and click install
5.
Find the file you put in your internal storage named;
ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip
And then swipe to install
6
An install wizard should appear and assuming that you haven't used this before select easy mode on the wizard and make sure you have it set to "install core engine then modules" and spam the hell out of the next button besides those 2 things
7.
TWRP screen should appear and you should boot into your device like normal
8.
ENJOY
SOME NOTES:
A.R.I.S.E AM3D DOES NOT WORK BUT OTHER THAN THAT EVERYTHING ELSE IS FINE
Update: DO NOT ATTEMPT TO INSTALL MAGNUM OPUS IT WILL FAIL
!!!!DISCLAIMER!!!!!
-I AM NOT RESPONSIBLE FOR A INCREASE IN GAS PRICES GETTING CHEATED ON BY YOUR WIFE OR A BRICKED DEVICE
Man.. I was going to try ARISE, but with all the concerns that I couldn't restore a nandroid because of data partition encryption, I just said screw it and I installed the v4a 2.3.4 module right from Magisk, and it works great with both USB Type-C to 3.5mm and Bluetooth.
I don't know if anyone's noticed or not, but Oreo has an entire section on Bluetooth audio protocol under the development options. Things like sample rate, bit rate, etc etc. I do know that v4a works with all protocols (SBC, AAC, aptX, aptX HD and LDAC), but if you up the sample rate to 96khz, it will NOT process. I usually use 48khz and it sounds great.
I installed arise and lost all audio on device . I don't know if it's a setting or something in aroma I should not have added or if it's viper settings I messed with .
I need to uninstall this how do I
Or how do I get sound back this is weird
joesee said:
Man.. I was going to try ARISE, but with all the concerns that I couldn't restore a nandroid because of data partition encryption, I just said screw it and I installed the v4a 2.3.4 module right from Magisk, and it works great with both USB Type-C to 3.5mm and Bluetooth.
Are you on Oreo 8.0 running V4A? Thanks!
Click to expand...
Click to collapse
climbhigh77 said:
Are you on Oreo 8.0 running V4A? Thanks!
Click to expand...
Click to collapse
Yes sir, I am. Since I got it working, I haven't touched anything in fear that it'll stop working. I haven't even made a nandroid. Twrp isn't installed, I just booted in it from adb.
Right on! I was also advised not to install TWRP. I flashed it and it seems to be working so far. Having other issues though like my camera and flash (flashlight) don't work now since installing magisk or the v4a which one I'm not sure but I assume magisk.
3/12/18 Update: camera and Flash are working properly now after a wipe Dalvik, cache and reboot.
Is anyone else having issues with viper4android working intermittently on Oreo? Sometimes it works but mostly it doesn't and I have no way to control it, toggling the switches does nothing and it doesn't matter if I reboot or not. It does work sometimes so I know the drivers are installed, and I've tried a fresh install a few times using the 2.3.4 version and the newest 5.0 version which produces the same result.
Is there a setting in magisk or Viper that I need to apply to to get it working seamlessly? I have systemless hosts check-in magisk already for ad blocking. There's got to be something I'm missing here. Any help is greatly appreciated thanks!
I was having this situation, the I disabled the music FX and it's gone for now
Flashlight stops because of selinux
Dolby Atmos for oreo works fine without any problems. You just have to find the working version in the last few pages of the mod thread.
Was able to get the latest ARISE, plus V4A, and Dolby ATMOS Oreo from guitardedhero working. I'm using SuperSU as I'm not a fan of Magisk. Flashed the latest ARISE, including the V4A 2.5.0.5. Crap, I made sure V4A opened and checked that the drivers were installed. But I may have flashed the ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk over the ARISE loaded v4a apk....? Try to see if the loaded apk works first. If not, flash Nougat_IO_test_fix.apk over: ViPER4Android_FX_v2505.zip Anyway, use this to set permissive: The.SELinux.Switch.ver.6.0.3.build.603.apk. Reboot. ARISE libs will be there and V4A should work. Sometimes you have to turn off the main power button for the V4A mod, go up to the corner button and exit. Clear out anything in recents. Then open V4A back up, and enable the power button. If music is playing, you will hear the change.
Ok.....Dolby. Go HERE and download the normal zip. Thank the dude, he's done a lot for us audiophiles. Flash it. Reboot. Apps will be there, and will likely forceclose. You have to extract the dolby zip and copy the libs from the dolby/lib and dolby/lib/soundfx files and paste them in the related folders in root /system/vendor and system/vendor/soundfx. You need to set the permissions to rw-r-r (644). Now save/reboot. Apps should work. I'm betting other libs/files weren't installed either, but just those got Atmos working, working well. Still looking through things and will verify later what else wasn't placed.:good:
Quick Question, I have used ARISE and Viper before and really like them but this is a Software Mod. I would just like to clarify that this Software Mod works on the actual Hardware Mod and if it does, does this Software Mod work on the Hardware Mod using a Custom ROM or Kernal? Can anyone confirm that yet?
androidddaaron said:
I installed arise and lost all audio on device . I don't know if it's a setting or something in aroma I should not have added or if it's viper settings I messed with .
I need to uninstall this how do I
Or how do I get sound back this is weird
Click to expand...
Click to collapse
Sorry about this... You may have to back up your internal then flash back to stock. This guide was from when our device was still on nougat. For Oreo I need you to install the module from MAGISK or find the magnum opus zip
Has anyone managed to get V4A functioning on stock, rooted Oreo? I've tried every option out there. Usually end up with it acting like it didn't install the driver after rebooting. I've tried putting the system in RW, switching selinux to permissive, installing BusyBox, etc. Have tried flashing it through recovery, installing through the apk, installing the magisk module, no luck. Hopefully someone can steer me in the right direction.
Edit 12/5/17:
Navigate to downloads in magisk manager, download the latest version of viper4android by ahrion, flash the file, then reboot.
Using some form of root file browser, I use MiXplorer, navigate to /sbin/.core/img/ViPER4AndroidFX/system, create a new folder called vendor in there, then copy the folder called lib and paste it into the vendor folder you made.
The end result should be /sbin/.core/img/ViPER4AndroidFX/system/vendor/lib. The final step needs a terminal emulator app downloaded, using the app, copy and paste the following in:
su -c ln -s /sbin/.core/img/audmodlib/system/vendor /sbin/.core/img/audmodlib/vendor
Finally, navigate to /sbin/.core/img/audmodlib/system/vendor/etc and open htc_audio_effects.conf, there will be a line for v4a_fx followed by a line called "path" and the path for the library, just change "system" to "vendor", then reboot, you should be successful
Crimsonshadow774 said:
Has anyone managed to get V4A functioning on stock, rooted Oreo? I've tried every option out there. Usually end up with it acting like it didn't install the driver after rebooting. I've tried putting the system in RW, switching selinux to permissive, installing BusyBox, etc. Have tried flashing it through recovery, installing through the apk, installing the magisk module, no luck. Hopefully someone can steer me in the right direction.
Click to expand...
Click to collapse
please tell me how to root U11 Oreo?
dangtoi1993 said:
please tell me how to root U11 Oreo?
Click to expand...
Click to collapse
Just flash TWRP and then flash Magisk.
Crimsonshadow774 said:
Just flash TWRP and then flash Magisk.
Click to expand...
Click to collapse
what version of TWRP, the lasest version unoffical not work on me.
dangtoi1993 said:
what version of TWRP, the lasest version unoffical not work on me.
Click to expand...
Click to collapse
I flashed this version twrp-3.1.1-2_UNOFFICIAL-ocn.img
dangtoi1993 said:
what version of TWRP, the lasest version unoffical not work on me.
Click to expand...
Click to collapse
I grabbed the latest unofficial one as of 11/28 and everything flashes fine for me.
joshzdad2013 said:
I flashed this version twrp-3.1.1-2_UNOFFICIAL-ocn.img
Click to expand...
Click to collapse
Crimsonshadow774 said:
I grabbed the latest unofficial one as of 11/28 and everything flashes fine for me.
Click to expand...
Click to collapse
i tried this TWRP https://forum.xda-developers.com/htc-u11/development/unofficial-htc-u11-twrp-recovery-t3706264 twrp-3.1.1-2_UNOFFICIAL. flash process fine. but then i boot to recovery nothing happen, the phone go power off.
There is a new version out, 3.2,, go here and select your device https://twrp.me/Devices/HTC
Thanks to user Secone00, I was finally able to get Viper running. I have updated the OP with the instructions.
Crimsonshadow774 said:
Has anyone managed to get V4A functioning on stock, rooted Oreo? I've tried every option out there. Usually end up with it acting like it didn't install the driver after rebooting. I've tried putting the system in RW, switching selinux to permissive, installing BusyBox, etc. Have tried flashing it through recovery, installing through the apk, installing the magisk module, no luck. Hopefully someone can steer me in the right direction.
Edit 12/5/17:
Navigate to downloads in magisk manager, download the latest version of viper4android by ahrion, flash the file, then reboot.
Using some form of root file browser, I use MiXplorer, navigate to /sbin/.core/img/ViPER4AndroidFX/system, create a new folder called vendor in there, then copy the folder called lib and paste it into the vendor folder you made.
The end result should be /sbin/.core/img/ViPER4AndroidFX/system/vendor/lib. The final step needs a terminal emulator app downloaded, using the app, copy and paste the following in:
su -c ln -s /sbin/.core/img/audmodlib/system/vendor /sbin/.core/img/audmodlib/vendor
Finally, navigate to /sbin/.core/img/audmodlib/system/vendor/etc and open htc_audio_effects.conf, there will be a line for v4a_fx followed by a line called "path" and the path for the library, just change "system" to "vendor", then reboot, you should be successful
Click to expand...
Click to collapse
I don't have .core in sbin. Rooted with magisk. Please suggest a solution.
You are used SuperSU or Magisk for root.
You can share link file flash Viper4Andriod on android oreo version.
I am on stock Oreo with twrp 3.2.0 rooted with magisk 14.5 and magisk manager 5.4.3. when I try to install viper through magisk it fails saying magisk is not activated.
Sent from my HTC U11 using Tapatalk
Crimsonshadow774 said:
Has anyone managed to get V4A functioning on stock, rooted Oreo? I've tried every option out there. Usually end up with it acting like it didn't install the driver after rebooting. I've tried putting the system in RW, switching selinux to permissive, installing BusyBox, etc. Have tried flashing it through recovery, installing through the apk, installing the magisk module, no luck. Hopefully someone can steer me in the right direction.
Edit 12/5/17:
Navigate to downloads in magisk manager, download the latest version of viper4android by ahrion, flash the file, then reboot.
Using some form of root file browser, I use MiXplorer, navigate to /sbin/.core/img/ViPER4AndroidFX/system, create a new folder called vendor in there, then copy the folder called lib and paste it into the vendor folder you made.
The end result should be /sbin/.core/img/ViPER4AndroidFX/system/vendor/lib. The final step needs a terminal emulator app downloaded, using the app, copy and paste the following in:
su -c ln -s /sbin/.core/img/audmodlib/system/vendor /sbin/.core/img/audmodlib/vendor
Finally, navigate to /sbin/.core/img/audmodlib/system/vendor/etc and open htc_audio_effects.conf, there will be a line for v4a_fx followed by a line called "path" and the path for the library, just change "system" to "vendor", then reboot, you should be successful
Click to expand...
Click to collapse
HI, this method isn't working for me. I have audio_effects.conf instead of the HTC one.
However it keeps telling me that i need to install the driver.
Can you help me?
I have magisk 14.5
Having issues myself with this procedure, which I followed to a T. As the above member said, I too am not receiving a file named "htc_audio_effects.conf." Only audio_effects.conf, which I edited the "V4A" line from system to vendor.
When I downloaded/installed the specific V4A module from Magisk 14.5, I received the "Magisk is not running" error that someone else mentioned. I've never seen that error when installing modules. So I just flashed the V4A zip through TWRP and it showed up in my app drawer. After running the provided line in terminal, it seems that correct /folder structure was placed from /sbin/.core etc...
Note that I'm running the latest LeeDroid Oreo ROM, so I'm not sure if that matters. I also have selinux set to permissive.
After following all of the steps, when I launch V4A, I'm asked to download the driver immediately, but it fails every time, as well as after a reboot.
Any ideas? Definitely want V4A running on Oreo, but I've had no success with any possible installations.
hx3 said:
Having issues myself with this procedure, which I followed to a T. As the above member said, I too am not receiving a file named "htc_audio_effects.conf." Only audio_effects.conf, which I edited the "V4A" line from system to vendor.
When I downloaded/installed the specific V4A module from Magisk 14.5, I received the "Magisk is not running" error that someone else mentioned. I've never seen that error when installing modules. So I just flashed the V4A zip through TWRP and it showed up in my app drawer. After running the provided line in terminal, it seems that correct /folder structure was placed from /sbin/.core etc...
Note that I'm running the latest LeeDroid Oreo ROM, so I'm not sure if that matters. I also have selinux set to permissive.
After following all of the steps, when I launch V4A, I'm asked to download the driver immediately, but it fails every time, as well as after a reboot.
Any ideas? Definitely want V4A running on Oreo, but I've had no success with any possible installations.
Click to expand...
Click to collapse
I've got it working by using the latest team venom Oreo beta and then the v4a for viper rom zip in twrp.
Sent from my HTC U11 using Tapatalk
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
i had the same but then i tried to use the other viper release from magisk and it worked. there is this one called hifi and fx
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
dgunn said:
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
Click to expand...
Click to collapse
that works for like 10 mins and then it gets killed
byReqz said:
that works for like 10 mins and then it gets killed
Click to expand...
Click to collapse
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
dgunn said:
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
Click to expand...
Click to collapse
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
byReqz said:
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
Click to expand...
Click to collapse
I was unaware that you were using the magisk module. I could not get that one to work either
dgunn said:
I was unaware that you were using the magisk module. I could not get that one to work either
Click to expand...
Click to collapse
the normal one doesnt work with viper doewsnt it?
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
TheNetwork said:
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
Click to expand...
Click to collapse
it only works for a few mins that way
I'm using the Android p beta and i don't have the problems with viper as i did with oxygen os 5. it's always processing for my headphones, either plugged in or Bluetooth. the only exception is sometimes after receiving a call while listening to music, after the call is over and my music resumes, viper is no longer processing. not every time though. i used the latest magisk and the viper module in the screenshot.
i also didn't make any changes to conf files, just installed through magisk download. rebooted, opened viper fx, gave it storage permissions and turned it on.
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
TuxRuffian said:
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
Click to expand...
Click to collapse
as i said, idk why but its working now.and im on material now
byReqz said:
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
Click to expand...
Click to collapse
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
reaper000 said:
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
Click to expand...
Click to collapse
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
byReqz said:
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
Click to expand...
Click to collapse
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
reaper000 said:
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
Click to expand...
Click to collapse
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
byReqz said:
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
Click to expand...
Click to collapse
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
reaper000 said:
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
Click to expand...
Click to collapse
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
byReqz said:
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
Click to expand...
Click to collapse
And you replaced the audio_effects.conf file in /system/vendor/etc with the one from the downloaded zip?
(Sorry to belabor the point, but it's not clear to me you tried all that)
I have a rooted Honor 6x. This is the setting time I am installing the app and each time it refuses to work, apparently because the driver will not install. I also have the Magisk module installed. Following advice on the internet, I copied the audio.effects.conf folder from system/etc (which had been modified by the installation, I think) to system/vendor/etc but there was no change. I also installed Busybox from the play store and nothing changed. Someone also mentioned changing audio.effects.conf in system/etc to audio.effects.conf.bak but I cannot, probably because of encryption.
I am at my wits end. The most annoying thing is that the first thing I see when I unlock my phone from a reboot is the damn app asking me to install the driver, which never gets installed. How do you guys get it to work?
No but alternative Ainur JamesDsp zip in magisk modules
Khan ubaid said:
No but alternative Ainur JamesDsp zip in magisk modules
Click to expand...
Click to collapse
Thanks. That's what I actually did. Viper4Android is a lot of work yet JamesDsp is as good. No regrets.