Database Info

[OUTDATED] Sound Mods Working +Install guide

/////
THIS GUIDE WAS FROM THE NOVEMBER SECURITY PATCH ON NOUGAT!!! DO NOT DO THIS IF YOU ARE ON OREO CAUSE YOU WILL LOSE ALL SOUND!
IF YOU WOULD LIKE TO USE VIPER ON OREO/PIE DEVICES. PLEASE USE THE MAGISK MODULE AND/OR FIND A BETTER GUIDE WITH A COMPATIBLE ZIP
//////
Okay I have confirmed that sound mods work on the Moto z2 force with no issues whatsoever many probably know that
How to Install:
1.
make sure you have root and TWRP installed on your Moto Z2 force
2.
download this version of A.R.I.S.E.
https://androidfilehost.com/?fid=457095661767141554
3.
Place the zip file in the Internal storage of your device (so its easy to find)
4.
Boot into TWRP recovery and click install
5.
Find the file you put in your internal storage named;
ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip
And then swipe to install
6
An install wizard should appear and assuming that you haven't used this before select easy mode on the wizard and make sure you have it set to "install core engine then modules" and spam the hell out of the next button besides those 2 things
7.
TWRP screen should appear and you should boot into your device like normal
8.
ENJOY
SOME NOTES:
A.R.I.S.E AM3D DOES NOT WORK BUT OTHER THAN THAT EVERYTHING ELSE IS FINE
Update: DO NOT ATTEMPT TO INSTALL MAGNUM OPUS IT WILL FAIL
!!!!DISCLAIMER!!!!!
-I AM NOT RESPONSIBLE FOR A INCREASE IN GAS PRICES GETTING CHEATED ON BY YOUR WIFE OR A BRICKED DEVICE

Man.. I was going to try ARISE, but with all the concerns that I couldn't restore a nandroid because of data partition encryption, I just said screw it and I installed the v4a 2.3.4 module right from Magisk, and it works great with both USB Type-C to 3.5mm and Bluetooth.
I don't know if anyone's noticed or not, but Oreo has an entire section on Bluetooth audio protocol under the development options. Things like sample rate, bit rate, etc etc. I do know that v4a works with all protocols (SBC, AAC, aptX, aptX HD and LDAC), but if you up the sample rate to 96khz, it will NOT process. I usually use 48khz and it sounds great.

I installed arise and lost all audio on device . I don't know if it's a setting or something in aroma I should not have added or if it's viper settings I messed with .
I need to uninstall this how do I
Or how do I get sound back this is weird

joesee said:
Man.. I was going to try ARISE, but with all the concerns that I couldn't restore a nandroid because of data partition encryption, I just said screw it and I installed the v4a 2.3.4 module right from Magisk, and it works great with both USB Type-C to 3.5mm and Bluetooth.
Are you on Oreo 8.0 running V4A? Thanks!
Click to expand...
Click to collapse

climbhigh77 said:
Are you on Oreo 8.0 running V4A? Thanks!
Click to expand...
Click to collapse
Yes sir, I am. Since I got it working, I haven't touched anything in fear that it'll stop working. I haven't even made a nandroid. Twrp isn't installed, I just booted in it from adb.

Right on! I was also advised not to install TWRP. I flashed it and it seems to be working so far. Having other issues though like my camera and flash (flashlight) don't work now since installing magisk or the v4a which one I'm not sure but I assume magisk.
3/12/18 Update: camera and Flash are working properly now after a wipe Dalvik, cache and reboot.

Is anyone else having issues with viper4android working intermittently on Oreo? Sometimes it works but mostly it doesn't and I have no way to control it, toggling the switches does nothing and it doesn't matter if I reboot or not. It does work sometimes so I know the drivers are installed, and I've tried a fresh install a few times using the 2.3.4 version and the newest 5.0 version which produces the same result.
Is there a setting in magisk or Viper that I need to apply to to get it working seamlessly? I have systemless hosts check-in magisk already for ad blocking. There's got to be something I'm missing here. Any help is greatly appreciated thanks!

I was having this situation, the I disabled the music FX and it's gone for now

Flashlight stops because of selinux

Dolby Atmos for oreo works fine without any problems. You just have to find the working version in the last few pages of the mod thread.

Was able to get the latest ARISE, plus V4A, and Dolby ATMOS Oreo from guitardedhero working. I'm using SuperSU as I'm not a fan of Magisk. Flashed the latest ARISE, including the V4A 2.5.0.5. Crap, I made sure V4A opened and checked that the drivers were installed. But I may have flashed the ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk over the ARISE loaded v4a apk....? Try to see if the loaded apk works first. If not, flash Nougat_IO_test_fix.apk over: ViPER4Android_FX_v2505.zip Anyway, use this to set permissive: The.SELinux.Switch.ver.6.0.3.build.603.apk. Reboot. ARISE libs will be there and V4A should work. Sometimes you have to turn off the main power button for the V4A mod, go up to the corner button and exit. Clear out anything in recents. Then open V4A back up, and enable the power button. If music is playing, you will hear the change.
Ok.....Dolby. Go HERE and download the normal zip. Thank the dude, he's done a lot for us audiophiles. Flash it. Reboot. Apps will be there, and will likely forceclose. You have to extract the dolby zip and copy the libs from the dolby/lib and dolby/lib/soundfx files and paste them in the related folders in root /system/vendor and system/vendor/soundfx. You need to set the permissions to rw-r-r (644). Now save/reboot. Apps should work. I'm betting other libs/files weren't installed either, but just those got Atmos working, working well. Still looking through things and will verify later what else wasn't placed.:good:

Quick Question, I have used ARISE and Viper before and really like them but this is a Software Mod. I would just like to clarify that this Software Mod works on the actual Hardware Mod and if it does, does this Software Mod work on the Hardware Mod using a Custom ROM or Kernal? Can anyone confirm that yet?

androidddaaron said:
I installed arise and lost all audio on device . I don't know if it's a setting or something in aroma I should not have added or if it's viper settings I messed with .
I need to uninstall this how do I
Or how do I get sound back this is weird
Click to expand...
Click to collapse
Sorry about this... You may have to back up your internal then flash back to stock. This guide was from when our device was still on nougat. For Oreo I need you to install the module from MAGISK or find the magnum opus zip

Viper4Android driver installation fails everytime.

Any GP 2 owner got error "Installation failed because of an I/O error. Try rebooting" after freshly installing (from magisk/twrp)?
Driver Version = 0.0.0.0
Enabled: No
Status: Abnormal
Audrio Format: Unsupported
Magisk Modules installed:
Busybox for Android NDK
Audio Modification librabry
universal deep_buffer removar
SeLinux mode changed to permissive.
No matter how many times I install/reboot this/phone, I always get this error.
OS = 8.1 w/ March Sec Update
Logcat
03-20 20:17:31.572 3573 3573 I ViPER4Android: System booted.
03-20 20:17:31.573 3573 3573 E ViPER4Android_Utils: [Fatal] Can't load libV4AJniUtils.so
03-20 20:17:31.573 3573 3573 I ViPER4Android: Jni library status = false
03-20 20:17:31.573 3573 3573 I ViPER4Android: Driver not configured correctly.
Click to expand...
Click to collapse

Get the one from zack it works flawlessly
Sent from my Pixel 2 using Tapatalk

I use the one from magisk actually works its the fx materialized one by ahrion and zack

Delta wolf said:
I use the one from magisk actually works its the fx materialized one by ahrion and zack
Click to expand...
Click to collapse
I've tried to install this several times and the driver never gets enabled. It asks to reboot in order to install the driver every time I open the app after rebooting the phone. Did you do anything special? What's the secret?

westhaking said:
I've tried to install this several times and the driver never gets enabled. It asks to reboot in order to install the driver every time I open the app after rebooting the phone. Did you do anything special? What's the secret?
Click to expand...
Click to collapse
You have to choose viper4android fx.

Thank you all for your replies. Zack helped me figure out the issue. I had installed Audio-Modification-Library module which was preventing A4A installation. Cheers!

Burninh2o said:
Thank you all for your replies. Zack helped me figure out the issue. I had installed Audio-Modification-Library module which was preventing A4A installation. Cheers!
Click to expand...
Click to collapse
Because of this post, I decided to install the Audio Modification Library module to see what it does. Oddly enough, for me, V4A actually started working after enabling this additional module and setting my kernel to permissive. Weird. Glad it's working now though!

westhaking said:
Because of this post, I decided to install the Audio Modification Library module to see what it does. Oddly enough, for me, V4A actually started working after enabling this additional module and setting my kernel to permissive. Weird. Glad it's working now though!
Click to expand...
Click to collapse
lol... nice!

I just had the same issue as a result of upgrading stock MIUI Android 7.1 ROMS on a Xiaomi Mi Max 2.
I solved it by:
1. In Magisk, disabled both Audio Mod Library and Viper4Android --> REBOOTed.
2. In Magisk, ENABLED both Audio Mod Library and Viper4Android. --> REBOOTed.
No driver errors and it works in Speaker and Headphone.
But I'm not getting any Viper Notification in the Shade or the Status.

Burninh2o said:
Thank you all for your replies. Zack helped me figure out the issue. I had installed Audio-Modification-Library module which was preventing A4A installation. Cheers!
Click to expand...
Click to collapse
This fix works flawlessly on the H918 running the Alpha 3.0 rom

Catalyst2012 said:
I just had the same issue as a result of upgrading stock MIUI Android 7.1 ROMS on a Xiaomi Mi Max 2.
I solved it by:
1. In Magisk, disabled both Audio Mod Library and Viper4Android --> REBOOTed.
2. In Magisk, ENABLED both Audio Mod Library and Viper4Android. --> REBOOTed.
No driver errors and it works in Speaker and Headphone.
But I'm not getting any Viper Notification in the Shade or the Status.
Click to expand...
Click to collapse
Stock Kernel too? I cannot get it to install drivers to save my life

MikeyLee said:
Stock Kernel too? I cannot get it to install drivers to save my life
Click to expand...
Click to collapse
Did you try Disabling/Enabling the modules in Magisk? I had to do this a few times before it worked. Viper status will report 'Processing: No' until you start playing a music file, then it should change to 'Processing:Yes'.
I was able to get the notification to show up by selecting the first option in Settings>Show Notification.

I've tried just about everything I can think of.

Here's what I don't get. I have 3 devices currently. All running Oreo. Huawei Mate SE, Xiaomi Redmi Note 3 and Ulefone T1. The Redmi Note 3 and Ulefone T1 both have V4A working fine and both kernels are Enforcing. The Huawei no matter how it's set refuses to work.

Viper4sound - Nothing happens

Today i unlocked and root my OP6 5.1.9
Went to Magisk and did install a Viper4 sound.
The problem is that......nothing happens. Try diferent modules, always uninstall before....and even so, nothing.
Even try APK + drivers.....nothing. Whatever i do, nothing change on default sound. i use Poweramp.
Is this something to do with Permissive something? On my previous Mi NOte 3 i had do uninistall FX and mod INI.
What should i do??

Mord0rr said:
Today i unlocked and root my OP6 5.1.9
Went to Magisk and did install a Viper4 sound.
The problem is that......nothing happens. Try diferent modules, always uninstall before....and even so, nothing.
Even try APK + drivers.....nothing. Whatever i do, nothing change on default sound. i use Poweramp.
Is this something to do with Permissive something? On my previous Mi NOte 3 i had do uninistall FX and mod INI.
What should i do??
Click to expand...
Click to collapse
Need to freeze base audio mod if not working go on official thread and post logs [emoji846]

During this process i get a loop entering always on TWRP...
Did restore backup, and nothing...then i saw start on partition B, and it did boot normally...
Now im scared to F**** something else....
Oh well.....default audio seems ok....

Mord0rr said:
Today i unlocked and root my OP6 5.1.9
Went to Magisk and did install a Viper4 sound.
The problem is that......nothing happens. Try diferent modules, always uninstall before....and even so, nothing.
Even try APK + drivers.....nothing. Whatever i do, nothing change on default sound. i use Poweramp.
Is this something to do with Permissive something? On my previous Mi NOte 3 i had do uninistall FX and mod INI.
What should i do??
Click to expand...
Click to collapse
You need to ROOT with Magisk, flash Busybox NDK via Magisk and the 1st of 3 Viper4Androids in the DL section of Magisk...

Long time user of Viper4Android. Across several HTCs, since Android 4.4 IIRC. Lately moved to the OP6.
Really....all you need is OOS 5.1.9, Magisk 16.0 (and the process that gets you those two things). Then install the ViPER4Android FX v1.7 module in Magisk. Choose the Material Design option when you activate/install V4a. If you get the I/O error installing the driver (first time running of V4a), then you need to enable SU in Magisk for V4a (as it didn't ask when you ran V4a).
If Poweramp is your only playback method. You'll need to make a change in the EQ/sound control setup (of PowerAmp, not V4a) for V4a to work. I ditched Poweramp long ago, so don't remember the specific change to make it compatible with V4a.
Lastly, are you direct connected to the OP6 (via the 3.5mm audio) or connected via BT? Those throw issues into it as well.
Don't get discouraged...it will work. I have V4a on my OP6 working via the 3.5mm connector, a BT connection to a vehicle system, and to another BT 3.5mm stereo receiver/adapter to headphones. It however does not work, to one of my BT devices, which uses LDAC BT connection to the OP6 (an EarStudio ES100).
HTH. More questions? Ask away.

Guys!
I apreciate the effort but nothing.....installed Busy BOx NDK, ok, and the first one (1.7):
However, when check drives status, i get a Enabled: NO - Processing: NO
Magisk 16.4
Root OK for Viper.
Maybe some previous driver install full of trash...even log seems to say it did clean old stuff....

Using Spotify connected via BT to vehicle.
It's either a remnant of another audio mod, or the EQ setup in Poweramp is not right. It's very specific. Google 'Poweramp Viper4Android fix'. And ignore the response of putting v4a in compatible mode. Not necessary. It's a special way if the EQ settings in Poweramp. One of the reasons I switched to USB Audio Player Pro.
HTH.

I notice you have xXx installed.....and i have OO 5.1.9 stock....
I really want earphones,....all the rest for me is not important...

Yes. xXx installed now. I ran about 2 weeks only with OOS 5.1.9, Magisk 16.4, AdAway, and V4a.
xXx installed BusyBox and V4a. But BusyBox is not needed for that.

Strange why it doesnt work for me....

Check this thread: Using-Poweramp-Viper4android
The Poweramp specific settings are mentioned. I don't use Poweramp anymore, so can't test. But remember doing this.
Or, there is another audio mod being persistent. This conversation just came up in the xXx thread. A user still had some DolbyAtmos mod enabled. Got it deleted, and V4a immediately started working.

mAN!
You are my hero!! When i start mess with sound proprietes i did start see results..
When i did use default app, everything was on, finally!
Gonna try now to put Poweramp working.
P.S. Strangly didnt found a big diference betwheen stock audio an Viper4sound . This is new for me....need time to tune it.
Love you guys! Tks XDA!

And Poweramp works!!
Quote:
"If you are having problems with PowerAmp, you first need to do this: Go to PowerAmp Settings - Audio - Advanced Tweaks. Now disable Direct Volume Control and enable Music FX!"
Maybe it helps someone else....
Thank you ALL!!

try installing audio compatibility patch module from magisk. then see if anything changes.

Dont have it installed...

Glad you have it working. If you are playing with V4a....then you likely enjoy great sound or at least tuning it to your liking. Setup your audio stream (no matter the source, Poweramp, Spotify, Pandora, Tidal, etc.) to the highest quality. If you're using Poweramp, then it'd be your sound files (FLAC or similar at the minimum). Then, get some quality mid range headphones/canalphones. Earbuds not. If you want to research (and be completely overwhelmed), visit head-fi.org.....and 'sorry about your wallet' as they say over there.

Uninstall the driver and flash the Magisk module one, so the processing sound will work flawless.

I did it on my Mi Note 3, but here im still afraid to do something wrong, especially with this alien A/B partition stuff...
For the record i still owm a Piston 2 earphones, ZS ZSR and ZS SR10 earphones... so i have good stuff!

Mord0rr said:
I did it on my Mi Note 3, but here im still afraid to do something wrong, especially with this alien A/B partition stuff...
For the record i still owm a Piston 2 earphones, ZS ZSR and ZS SR10 earphones... so i have good stuff!
Click to expand...
Click to collapse
Not familiar with the Mi Note 3. Does it use Magisk or SU?
In general, I've found that if you are using a Magisk setup device, it's just install the v1.7 module I mentioned above, and all is usually good to go (as long as there aren't other audio mods enabled!). If you are using a device that uses SU, you may also have to do some boot up kernel config to set SELinux to unenforcing, rather than it's usual default of enforcing. You don't need all the other fluff....xposed, busybox, etc. etc. to make V4a work properly.
---------- Post added at 01:54 PM ---------- Previous post was at 01:44 PM ----------
My wallet's unfortunate casualty :silly: of my reading Head-Fi.org too much. But, these give some truly awesome sound....
Serious Listening.....Flare Audio Pro
Most of the time.....iBasso IT01
Radsone EarStudio....usually connected to IT01s

Mi Note 3 i had to erase SoundFX or whatever, inject Viper4sound 2.3.5 file and other stuff i don`t remenber...
At moment i only use Magisk and Viper4sound, so no chance of other stuuf conflict!
Thank you Guys!!

Cant get Viper to work properly

Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help

i had the same but then i tried to use the other viper release from magisk and it worked. there is this one called hifi and fx

Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me

dgunn said:
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
Click to expand...
Click to collapse
that works for like 10 mins and then it gets killed

byReqz said:
that works for like 10 mins and then it gets killed
Click to expand...
Click to collapse
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app

dgunn said:
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
Click to expand...
Click to collapse
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now

byReqz said:
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
Click to expand...
Click to collapse
I was unaware that you were using the magisk module. I could not get that one to work either

dgunn said:
I was unaware that you were using the magisk module. I could not get that one to work either
Click to expand...
Click to collapse
the normal one doesnt work with viper doewsnt it?

Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.

TheNetwork said:
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
Click to expand...
Click to collapse
it only works for a few mins that way

I'm using the Android p beta and i don't have the problems with viper as i did with oxygen os 5. it's always processing for my headphones, either plugged in or Bluetooth. the only exception is sometimes after receiving a call while listening to music, after the call is over and my music resumes, viper is no longer processing. not every time though. i used the latest magisk and the viper module in the screenshot.
i also didn't make any changes to conf files, just installed through magisk download. rebooted, opened viper fx, gave it storage permissions and turned it on.

Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.

TuxRuffian said:
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
Click to expand...
Click to collapse
as i said, idk why but its working now.and im on material now

byReqz said:
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
Click to expand...
Click to collapse
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):

reaper000 said:
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
Click to expand...
Click to collapse
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox

byReqz said:
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
Click to expand...
Click to collapse
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.

reaper000 said:
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
Click to expand...
Click to collapse
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?

byReqz said:
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
Click to expand...
Click to collapse
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?

reaper000 said:
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
Click to expand...
Click to collapse
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime

byReqz said:
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
Click to expand...
Click to collapse
And you replaced the audio_effects.conf file in /system/vendor/etc with the one from the downloaded zip?
(Sorry to belabor the point, but it's not clear to me you tried all that)

Android 10 + Viper - conflicting audio mod found?

So the thread is simple. I wanted to install Viper, to lower my media volume cause even 1 is too high. Now... I was able to install Viper easily on a Pixel 3a XL.
Just grabbed the Magisk module and off it went.
Not here though.
I get a message saying...
******************************
Powered by Magisk (@topjohnwu)
******************************
! Conflicting audio mod found!
! You will need to install !
! Audio Modification Library !
Attached the log and screen.
Tried everything since. The app from XDA Labs, the MOD lib it talks about. Nothing.
Maybe something left some junk somewhere? But how do I clean out all the Viper remaining parts?
Thanks for the help...

Same message. I can't get Viper to work. I have it installed via Magisk but the audio fx don't work. It's the stock ROM and rooted.

h8Aramex said:
! Conflicting audio mod found!
! You will need to install !
! Audio Modification Library !
Click to expand...
Click to collapse
Marmalade_Shaws said:
Same message. I can't get Viper to work. I have it installed via Magisk but the audio fx don't work. It's the stock ROM and rooted.
Click to expand...
Click to collapse
I mean......why not follow the directions and install Audio Modification Library? Get it from Magisk Manager Download section and reboot.

docnok63 said:
I mean......why not follow the directions and install Audio Modification Library? Get it from Magisk Manager Download section and reboot.
Click to expand...
Click to collapse
Doesn't work. Tried. I also tried the AINUR mods. In the end they just bricked the current setup on my phone.
Something is messed up in OxygenO and OnePlus won't care anyway, so it's what it is. I mean, the delayed notifications have been plaguing OOS since what? 3 years? So hey, maybe in 10 years they'll take a look at this. Until then.... just move to LineageOS or some other rom as an alternative.

h8Aramex said:
Doesn't work. Tried. I also tried the AINUR mods. In the end they just bricked the current setup on my phone.
Something is messed up in OxygenO and OnePlus won't care anyway, so it's what it is. I mean, the delayed notifications have been plaguing OOS since what? 3 years? So hey, maybe in 10 years they'll take a look at this. Until then.... just move to LineageOS or some other rom as an alternative.
Click to expand...
Click to collapse
If you have installed another sound mod, you need to install aml after installing viper. Otherwise, they conflict. That's all there is to it.
As for delayed notifications, the only thing that I can think of is that your messaging apps are not set to don't optimize in battery settings. If not, they will be set to sleep and you will only receive your notifications when you open the app.

Common sense guys , It has Dolby installed , so that's why it detects it . Just install Audio modification Library and Audio Compatibility Patch , solved.

h8Aramex said:
So the thread is simple. I wanted to install Viper, to lower my media volume cause even 1 is too high. Now... I was able to install Viper easily on a Pixel 3a XL.
Just grabbed the Magisk module and off it went.
Not here though.
I get a message saying...
******************************
Powered by Magisk (@topjohnwu)
******************************
! Conflicting audio mod found!
! You will need to install !
! Audio Modification Library !
Attached the log and screen.
Tried everything since. The app from XDA Labs, the MOD lib it talks about. Nothing.
Maybe something left some junk somewhere? But how do I clean out all the Viper remaining parts?
Thanks for the help...
Click to expand...
Click to collapse
Try viper4android v2.7.1. Just install driver 2x ( will reboot 2x too) works great for me.

This is an issue with Android 10. This is how to fix it:
https://www.getdroidtips.com/viper4android-android-10/