Hi there
I noticed that a new 3.01 firmware has been released for the KLD MTCE units from here : https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/KLD
Did someone test it ?
It seems like Cs-x doesn't have patched it yet with his audio tweaks but has released a superior v3.06 version : https://forum.xda-developers.com/an...ent/mod-cs-x-mod-mtcb-c-mcu-firmware-t3816032
Will I be able to downgrade from v3.01 to v2.94 if the new v3.01 doesn't suit my needs ?
Thanks in advance,
Damien
Maybe a stupid question, but mcu KLD is the same for px3 and px5? If they are mtcd / e
TheDiB said:
Hi there
I noticed that a new 3.01 firmware has been released for the KLD MTCE units from here : https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/KLD
Did someone test it ?
It seems like Cs-x doesn't have patched it yet with his audio tweaks but has released a superior v3.06 version : https://forum.xda-developers.com/an...ent/mod-cs-x-mod-mtcb-c-mcu-firmware-t3816032
Will I be able to downgrade from v3.01 to v2.94 if the new v3.01 doesn't suit my needs ?
Thanks in advance,
Damien
Click to expand...
Click to collapse
I did successfully downgrade my MTCE KLD to 2.88 and return back to 2.94, also tested HA_3.01 firmware on KLD (there were issues, there is no point in doing it) and returned back to KLD after that.
The link you posted for Cs-x mods is for MTCB/MTCC, while MTCD/MTCE is not compatible!
---------- Post added at 04:25 PM ---------- Previous post was at 04:19 PM ----------
An92 said:
Maybe a stupid question, but mcu KLD is the same for px3 and px5? If they are mtcd / e
Click to expand...
Click to collapse
Yes it is.
Thank you very much for your answers.
As I see, Cs-x did not release v3.xx sound patched firmwares for KLD MTCD/E yet.
I will wait for that to come out.
So I have the new KLD MCU 3.01 and you now have more options for the steering wheel controls. You can both turn off the screen and the recent open apps options. Really like the ability to turn off screen for night. More options but that is all I found so far that worked for me.
KAOS313 said:
So I have the new KLD MCU 3.01 and you now have more options for the steering wheel controls. You can both turn off the screen and the recent open apps options. Really like the ability to turn off screen for night. More options but that is all I found so far that worked for me.
Click to expand...
Click to collapse
These were all options since 2.8...
Please help share method to turn off screen for steering wheel controls. Thank you
---------- Post added at 03:54 AM ---------- Previous post was at 03:53 AM ----------
KAOS313 said:
So I have the new KLD MCU 3.01 and you now have more options for the steering wheel controls. You can both turn off the screen and the recent open apps options. Really like the ability to turn off screen for night. More options but that is all I found so far that worked for me.
Click to expand...
Click to collapse
Please help share method to turn off screen for steering wheel controls. Thank you
aeonline said:
Please help share method to turn off screen for steering wheel controls. Thank you
---------- Post added at 03:54 AM ---------- Previous post was at 03:53 AM ----------
Please help share method to turn off screen for steering wheel controls. Thank you
Click to expand...
Click to collapse
Use the app "wheelkeys". In that app it has symbols and one looks like a computer screen with a x in the middle. That when set to a key will turn on and off the screen for better night driving.
KAOS313 said:
Use the app "wheelkeys". In that app it has symbols and one looks like a computer screen with a x in the middle. That when set to a key will turn on and off the screen for better night driving.
Click to expand...
Click to collapse
Thank you ,but in rom malaysk oreo 8 : 3.5 not find turn off the screen
aeonline said:
Thank you ,but in rom malaysk oreo 8 : 3.5 not find turn off the screen
Click to expand...
Click to collapse
Have you updated to the latest MCU? It was a new feature and if your MCU is older the option won't be their.
KAOS313 said:
Have you updated to the latest MCU? It was a new feature and if your MCU is older the option won't be their.
Click to expand...
Click to collapse
I have MCU KLD 2.94bd today will try update KLD 3.01
aeonline said:
I have MCU KLD 2.94bd today will try update KLD 3.01
Click to expand...
Click to collapse
So if you keep having a problem I can take a sceenshot of my wheelcontrols app with my button config. Its all symbols so its hard to tell ya what option is is but its their.
KAOS313 said:
So if you keep having a problem I can take a sceenshot of my wheelcontrols app with my button config. Its all symbols so its hard to tell ya what option is is but its their.
Click to expand...
Click to collapse
Big thank for your support
I will inform you of the results again.
KAOS313 said:
So if you keep having a problem I can take a sceenshot of my wheelcontrols app with my button config. Its all symbols so its hard to tell ya what option is is but its their.
Click to expand...
Click to collapse
Now already updated KLD3.01 but Can't do it :crying::crying:
https://youtu.be/2x-OIwKJ5mA
So here is a screen shot of my settings with wheel keys. The one you are looking for is 2 squares that look like a screen with an X in it. https://imgur.com/gallery/xi62Ibv?s=sms
Check Cross compatibility thread for a more recent perhaps HA MCU instead.
marchnz said:
Check Cross compatibility thread for a more recent perhaps HA MCU instead.
Click to expand...
Click to collapse
Hi Good day , For MCU KLD update to HA? I'm not sure, it has negative effects.
Hi guys
I update mcu to kld v3.01
But I can't update my android system from 6.0.1 to 8 or 9 or 10 ..
Any advice please and thank you.
+
alihassan5 said:
Hi guys
I update mcu to kld v3.01
But I can't update my android system from 6.0.1 to 8 or 9 or 10 ..
Any advice please and thank you.
Click to expand...
Click to collapse
Yes, read forums threads that have covered this in depth before posting.
See my posts. Read and ask questions later
Related
Hey guys! Been out of the rooting game for a while now. All these locked bootloader nowadays has that effect. Thank God for the Chinese! I just ordered a android head unit for the car from Amazon :
Volsmart 7 inch Android 5.1.1 Car Stereo Lollipop Quad Core 1024600 Capacitive Touch Screen without DVD Player support GPS Navigation Radio Bluetooth OBD2 USB SD WiFi ScreenMirror Backup Camera https://www.amazon.com/dp/B01FVV8U2M/ref=cm_sw_r_other_apa_5jF5xbJ1VW5C8
And I'm wondering what the root process is like for one of these. I'm not sure sure if I should be looking for this specific device, or just something generic based on the software version for instructions. Can anyone point me in the right direction?
I have Volsmart 5.1 Mtcd-kgl mcu version 1.75_1. If your Mcu version is older, you can ask the seller to give you the latest firmware.
You can use Malaysk MTCD ROM.
I used Malaysk Rom v5 and then upgraded to V6. My HU is running without issue. Malaysk ROM is a pre rooted ROM.
Make sure that you know how to get to recovery menu of the head unit.
Right after upgrading to Makaysk ROM, it is hard to get to recovery to clear cache and data. Keep trying several times, you will be able to. After this, getting to the recovery is normal.
If you don't want to use Malaysk ROM, use Kingo Root, just follow the Xposed LP thread under MTCB development. I did try it successfully before I used Malaysk ROM.
So basically it's just as simple as flashing a different rom, eh? Sounds a little too easy lol
Got it all installed over the weekend. Working great!
Volsmart firmware
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
arielo2014 said:
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
Click to expand...
Click to collapse
Do you have a link for the latest mcu update? The people at Volsmart have not been very helpful with my inquiries.
---------- Post added at 07:08 AM ---------- Previous post was at 07:00 AM ----------
cemotech said:
Do you have a link for the latest mcu update? The people at Volsmart have not been very helpful with my inquiries.
Click to expand...
Click to collapse
Sorry, after some more searching I found it here. http://forum.xda-developers.com/and...k3188-mtcd-t3366561/post69468247#post69468247
arielo2014 said:
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
Click to expand...
Click to collapse
Ariel please share de link
MTCD Oreo ROM Extract/Dump is here: ROM
An example of XDA teamwork - Thanks to:
@ikerg
@xdamember2 @RedScorpioXDA
@kumarai
Solution see post 159, thanks @kumarai
Process video again thanks to @kumarai
- note the approx 5 minutes of grey screen before "erase" is seen, proceeding first SDCard install of android 8 recovery files.
Team effort. Noted no BT with wd725 (integrated wifi/bt.)
Technical details of the 'Upgrade" - maybe useful in other upgrade scenarios:
- The Android 6 [update.img] [miniloaderall.bin] has been replaced with the Oreo [miniloaderall.bin] from the Oreo OTG ROM Extract.
- The modifed Android 6 update image is used to create a bootable SDCARD. containing the the Oreo Miniloader.
- SDCARD flashes the OREO Recovery images to NAND.
- With Oreo Recovery installed, .ZIP upgrade images can be installed.
Hi,
With resellers not proving a PX5 Oreo ROM image and no other member having OTG and as I have OTG and the jig/tools I could provide a ROM extract if the community provides a PX5 Oreo core board or complete unit.
Any supporters for either loaning a PX5 Oreo SOM or funding a complete unit?
If loaned I would extract ROM and return SOM within 2 days.
marchnz said:
Hi,
With resellers not proving a PX5 Oreo ROM image and no other member having OTG and as I have OTG and the jig/tools I could provide a ROM extract if the community provides a PX5 Oreo core board or complete unit.
Any supporters for either loaning a PX5 Oreo SOM or funding a complete unit?
If loaned I would extract ROM and return SOM within 2 days.
Click to expand...
Click to collapse
I will likely be able to loan a unit or SOM within a week or so. I noticed the SOM rev 8 (used in the Oreo hu) has more header pins than the earlier version though some may be blank. Is your hardware compatible?
A ROM Image has been availible here for almost a week now.
https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Psycho Dave said:
A ROM Image has been availible here for almost a week now.
https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Click to expand...
Click to collapse
Unfortunately, not. It is an OTA/zip upgrade and not an IMG.
xdamember2 said:
I will likely be able to loan a unit or SOM within a week or so. I noticed the SOM rev 8 (used in the Oreo hu) has more header pins than the earlier version though some may be blank. Is your hardware compatible?
Click to expand...
Click to collapse
Thanks, who is manufacturer, HCT or Joyings STT?
Are you able to post JPGs?
marchnz said:
Thanks, who is manufacturer, HCT or Joyings STT?
Are you able to post JPGs?
Click to expand...
Click to collapse
It should be compatible since HA has offered me an Octacore 4 gb RAM SOM to upgrade my 2 gb HU to Android 8.
Oberbergler said:
It should be compatible since HA has offered me an Octacore 4 gb RAM SOM to upgrade my 2 gb HU to Android 8.
Click to expand...
Click to collapse
I can post jpegs however the unit is currently installed. The rom is hct, the mcu is gs and the SOM is hct . I should receive another presumably identical hu today.
marchnz said:
Thanks, who is manufacturer, HCT or Joyings STT?
Are you able to post JPGs?
Click to expand...
Click to collapse
Here is the SOM and mainboard.
https://s.amsu.ng/mtYfNnUStbhN
xdamember2 said:
Here is the SOM and mainboard.
https://s.amsu.ng/mtYfNnUStbhN
Click to expand...
Click to collapse
Thanks - unit is an MTCD (possibly GS) with HCT SOM.
xdamember2 said:
Here is the SOM and mainboard.
https://s.amsu.ng/mtYfNnUStbhN
Click to expand...
Click to collapse
Can you post again ? - The link has expired already
marchnz said:
Thanks - unit is an MTCD (possibly GS) with HCT SOM.
Click to expand...
Click to collapse
I ve never seen an MTC SoM that isnt made by HCT.
typos1 said:
Can you post again ? - The link has expired already
I ve never seen an MTC SoM that isnt made by HCT.
Click to expand...
Click to collapse
Here's a new link.
https://s.amsu.ng/m6vqXHrYS5gN
This one is also very temporary.
---------- Post added at 05:45 PM ---------- Previous post was at 05:42 PM ----------
marchnz said:
Thanks - unit is an MTCD (possibly GS) with HCT SOM.
Click to expand...
Click to collapse
Would you pm me your shipping address or postal code, and I'll check the rates?
xdamember2 said:
Here's a new link.
https://s.amsu.ng/m6vqXHrYS5gN
This one is also very temporary.
Click to expand...
Click to collapse
Thanks, dont want to sound ungrateful but have you got a higher resolution ? Its so low that you cant make out anything.
typos1 said:
Thanks, dont want to sound ungrateful but have you got a higher resolution ? Its so low that you cant make out anything.
Click to expand...
Click to collapse
I'm a bit new to this. I see when I click the link there's an image and also a "download" button. If I download there's a jpeg sharp enough to read the silkscreen. (Unless Samsung is only allowing downloads to Samsungs?) I took the pic with my cellphone, I could also do one on the dslr.
typos1 said:
Thanks, dont want to sound ungrateful but have you got a higher resolution ? Its so low that you cant make out anything.
Click to expand...
Click to collapse
I zipped the pic and now I should be able to attach it directly. Please let me know if higher res is required.
Does anyone know if the interface board provides better (i.e. multiple) USB ports now (i.e. not a single USB port split with a hub), and/or if the USB is better than the prior USB speed and power provided?
Ditto -- now Bluetooth 5.0?
xdamember2 said:
I zipped the pic and now I should be able to attach it directly. Please let me know if higher res is required.
Click to expand...
Click to collapse
Thanks.
So it is HCT PX5 SoM Rev8.0 Designed 2017-06-09 Interesting.
It looks like targeted at 8.0 Beta 2 time SoM prototype rushed into manufacturing?
PekeMM said:
It looks like targeted at 8.0 Beta 2 time SoM prototype rushed into manufacturing?
Click to expand...
Click to collapse
Why would you say that ? My MM 4Gb RK3368/PX5 SoM is also rev8.0.
@marchnz you could try using MTCD ROM Builder (here, needs a Linux machine : https://forum.xda-developers.com/an...re-development/tool-mtcd-rom-builder-t3475444 ) to make an image using the files in the zip. Theres the option to use FUSE which may get a round any partitioning problems.
I use Linux so I can make an image if youve got somewhere I can upload it to.
Maybe I ll try it myself, its just the hassle of trying to unbrick it if it bricks.
EDIT: just re read that thread and see youve already posted in it and used it on your RK3368/PX5, not sure it would work anyway as I think it requires a proper image already, dont think it can make one from separate images.
typos1 said:
Why would you say that ? My MM 4Gb RK3368/PX5 SoM is also rev8.0.
@marchnz you could try using MTCD ROM Builder (here, needs a Linux machine : https://forum.xda-developers.com/an...re-development/tool-mtcd-rom-builder-t3475444 ) to make an image using the files in the zip. Theres the option to use FUSE which may get a round any partitioning problems.
I use Linux so I can make an image if youve got somewhere I can upload it to.
Maybe I ll try it myself, its just the hassle of trying to unbrick it if it bricks.
EDIT: just re read that thread and see youve already posted in it and used it on your RK3368/PX5, not sure it would work anyway as I think it requires a proper image already, dont think it can make one from separate images.
Click to expand...
Click to collapse
To create the image we need the partition addresses....so..unless we got an update with the classic .img or we could dump it from an already MTCD px5 under android 8.
I am going to receive a 4gb/32 px5 board with preinstalled android 8...but I don't know how to do for my pc to recognize it in order to dump the software...(I did before for android tv under rk3288)
Any suggestion?
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
To create the image we need the partition addresses....so..unless we got an update with the classic .img or we could dump it from an already MTCD px5 under android 8.
I am going to receive a 4gb/32 px5 board with preinstalled android 8...but I don't know how to do for my pc to recognize it in order to dump the software...(I did before for android tv under rk3288)
Any suggestion?
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
But would we need the partition addresses if we create a FUSE ROM ? - MTCD ROM Builder will make one big partition surely ?
I could try using an MM RK3368/PX5 image and adding the separate images from the Oreo update.zip.
dears
i am looking to change my rom to MTCD rom
MCU version:
2018-07-19 16:02:17 SP_(R68)_26_C26DR68_6026D_CAN(ALL)_NEWLAP
here the unit
https://www.aliexpress.com/item/32958204248.html?spm=a2g0s.9042311.0.0.3de94c4d0IEKFh
kindly support
kindly support if possible
helmi_zr1 said:
dears
i am looking to change my rom to MTCD rom
MCU version:
2018-07-19 16:02:17 SP_(R68)_26_C26DR68_6026D_CAN(ALL)_NEWLAP
here the unit
https://www.aliexpress.com/item/32958204248.html?spm=a2g0s.9042311.0.0.3de94c4d0IEKFh
kindly support
Click to expand...
Click to collapse
Very similar to the one I bought last week. Its a Junsun radio? Are you root? Upload more info about the Android and system version
---------- Post added at 03:16 PM ---------- Previous post was at 03:16 PM ----------
helmi_zr1 said:
kindly support if possible
Click to expand...
Click to collapse
Can you upload more info please?
sir
here the details
CPU:ARM cortex-A53 EIGHT-CORE 4+32 GB PX5
GPU: POWERVR G6110
DVD VERSION: 2018-03-26 16:08:56 R-86C-0961-NC-NP-A.0-P12S
BT VERSION: BLINK_8723DS
CAN VERSION: UNKNOWN
WI-FI : 00:E0:4C:3C:8C:49
DO you need more details
i would like to use custom rom , can you support
hello
kindly help please
I don't know why nobody told you yet maybe they're off on vacation. Also, your question is not very clear. Are you looking to update the ROM for the HU or the MCU? First of you don't have an MTCD compatible MCU. The MCU string has to show MTCD or MTCE to be compatible.
As for updating the HU you would need to know what you hope to improve and in most case you can change things in other ways.
request for rom for my head unit
nic2k said:
I don't know why nobody told you yet maybe they're off on vacation. Also, your question is not very clear. Are you looking to update the ROM for the HU or the MCU? First of you don't have an MTCD compatible MCU. The MCU string has to show MTCD or MTCE to be compatible.
As for updating the HU you would need to know what you hope to improve and in most case you can change things in other ways.
Click to expand...
Click to collapse
sir
sorry to reply to you now
and what i am looking for custom rom like Malaysk ROM or any similar can i use to my Android head unit
i need to change my orginal one with any custom Rom
i hope you understand my request , thank you
Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.
LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...
themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!
I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
Hi. Maybe you can help me here. I have a radio with android PX5, I had easy connect applications at the factory. It worked for me without any problem, now when I start I get the message "not register", and the application shuts down. What should I do please help.
Is it MTCD, post teh Android system informations screen shot including teh MCU version
marchnz said:
Is it MTCD, post teh Android system informations screen shot including teh MCU version
Click to expand...
Click to collapse
You know, it worked for me before, after a while it stopped working. I'll be in the car and I'll do it
Sitesot said:
You know, it worked for me before, after a while it stopped working. I'll be in the car and I'll do it
Click to expand...
Click to collapse
I like toast.
marchnz said:
I like toast.
Click to expand...
Click to collapse
I like eggs on my toast.