Hi. I just wanted to flash BTU firmware over handset from EE UK.
I downloaded firmware via samfirm, then flashed via odin. The starnge thing is, after flashing and reboot, the default language is German.. I flashed other devices via odin and always default language was English. Any ideas?
Related
Hi, first flashed french 5.1.1 and now that vodafone has released the branded 5.1.1 want to back to stock (ATL) but when flash the sammobile package the csc changes to SIM (vodafone slovenia) and there´s no way to change the csc.
I´ve reading a lot and seems the ATL package is multicsc and flashing defaults to SIM. and there´s no possibility to change csc because cant root 5.1.1
Im totally stuck. Why want the branded? the operator customization and VoLTE activation.
Thanks to all
Do a factory reset in the bootloader, boot up and then flash the operator rom again
*#272*IMEI#
Tried flashing, boot, wipeall twice, flashing wipe data and cache but the multicsc stays as SIM csc...
*#272.... doesnt work in this devices.
tried to downgrade to 5.0.2 and root to change manually csc but the bootloader is upgraded keeping downgrades.
the only hope is pingpongroot or anyone can root 5.1.1 without tripping knox
Bring your S6 back to Samsung for official ROM flashing back to stock.
Only way to change CSC is to root...
roydok said:
Only way to change CSC is to root...
Click to expand...
Click to collapse
Not true. I did it several times on unrooted stock devices.
godutch said:
Not true. I did it several times on unrooted stock devices.
Click to expand...
Click to collapse
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
Did you let the phone boot completely after flashing the new firmware and then do the wipe from recovery?
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
roydok said:
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
Click to expand...
Click to collapse
You could try without a simcard (flash, boot up, wipe in recovery) or a different simcard. I never manage to change csc either in 1 go and the results can be different, eg sometimes I get Vodafone apps installed and sometimes not....
Will try it without a SIM card. Thanks.
roydok said:
Will try it without a SIM card. Thanks.
Click to expand...
Click to collapse
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
greenredblue said:
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
Click to expand...
Click to collapse
I also tried it but couldn't get it to the correct CSC (VDF in my case) either, I can do it with other packages and get it to PHN (dutch)
roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
tiborprogmed said:
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
Click to expand...
Click to collapse
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
i have flashed the XEF. and that was wrong. esspecially it broke the spo2, and stress measuring... I would go back to another, BUT after XEF, I always had flashing interrupt in the HIDDEN file stage.
But after I have found a flashable FW again ( maybe SER or SEB) I was able to flash XEH, or BTU. and it was changing the XEF to SEB OR SER after wipe in recovery.
The only rom I will never flash againt is XEF.
ps: i never root this 920F
greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
Now I was able to reproduce it twice!!! :
How it works : on devices where dialer NOT shown up CSC changer (e.g.: GS6920F) :
Go to recovery, Dial up, Home + Power
wipe cache and perform a factory reset
next is important : power down the phone. NOT to reboot.
Power on in download mode: volume down+home+power buttons
FLASH for example : BTU :
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
after reboot, it will be English, and If U go to recovery it will apply BTU.
Hope it helps
p.s.: It wont works with EVERY Firmware. don't know WHY. For example :
I wanted to flash after succesfully changed the CSC from TPH to BTU, so I wanted to flash XEH....BUT that resets to TPH after XEH flash.
So at least to BTU it works specially if you are in TPH CSC !
Hi there, as from the title, I'm trying to flash the latest Italian (ITV) Nougat ROM with the following files (downloaded from SamMobile):
- AP_G930FXXU1DQB3_CL10422490_QB12410562_REV00_user_low_ship_meta.tar.md5
- BL_G930FXXU1DQB3_CL10422490_QB12410562_REV00_user_low_ship.tar.md5
- CP_G930FXXU1DQB1_CL10422490_QB12282417_REV00_user_low_ship.tar.md5
- HOME_CSC_ITV_G930FITV1DQA8_CL10349826_QB12193290_REV00_user_low_ship.tar.md5
I'd like to use the home_csc just to keep all my data during the flashing (it should be fine when going from Nougat to Nougat...)
The "previous" installed rom whas the final BTU one G930FXXU1DQB3_G930FOXA1DQB1_BTU (same Changelist 10422490 as the ITV that I want to flash)
Odin gives me an error at the last check: hidden.img FAIL
From what I've learnt, it seems that the size of the hidden.img file from ITV is bigger than the BTU one and can't be loaded in the partition of the phone (its original firmware when brand new was OMN, and now I get the same error when trying to flash the Nougat OMN rom)
After the above error, I can always restore the phone by flashing the BTU Nougat rom, but I wonder if there is a way to "come back" to one Italian ITV or OMN rom...
One solution could be to use the HOME_CSC from BTU instead of the "bigger one" in ITV or OMN (but I will not receive OTA future updates?)
The FINAL solution I think can be to use the Emergency recovery function in Smart Switch PC software, but this will erase all my data (I'm trying to avoid it, and leaving this as the last solution, together with using CSC instead of HOME_CSC in Odin)
Have a read here, if the CSC is not included as part of your own Multi CSC, you may need to use the PIT file & Repartition option
www. sam mobile .com/forum/showthread.php?t=30800
follow this guide: Open the firmware file in winrar and extract the hidden.img. Rename it as hidden.img.tar.
Load the new file into the PDA tab, and flash.
When the phone boots, the displayed image will be touchwiz teal, there will be a little android and GALAXY spelt
Solved by flashing the latest ITV firmware (aka Italy no brand) with Odin, using CSC and not HOME_CSC, then restoring all my data and settings.
Before flashing ITV I also tried OMN (aka Vodafone Italia) with full wipe using CSC but the phone then "woke up" speaking German and not Italian, weird... I then chose to go with ITV
Inviato dal mio SM-G930F utilizzando Tapatalk
Hi i updated my s8+ to the german oreo rom and now the xeu is out for the uk i have tried updating with the csc home and it fails every time does this mean i need to wipe the rom with the normal csc in order to install thanks for any help
I'm planning to flash a Germany CRC7 ROM but my CSC is not german. Will there be any errors in stock recovery or will it just change my CSC?
I remember flashing CRB7 from a thread here using stock recovery and I don't know how that didn't change my CSC. Any help is appreciated.
My phone is unlocked by the way.
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Gisar said:
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Click to expand...
Click to collapse
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
*Detection* said:
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
Click to expand...
Click to collapse
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Gisar said:
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Click to expand...
Click to collapse
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
*Detection* said:
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
Click to expand...
Click to collapse
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Gisar said:
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Click to expand...
Click to collapse
Exactly the same as XEO is also included in the BTU CSC
*Detection* said:
Exactly the same as XEO is also included in the BTU CSC[/QUOTE
What about flashing the same firmware with odin 3.13.1, but with ticked repartition in the option? This, regarding the comments in sammobile forum works. But for me doesn't. Maybe for Oreo it doesn't work or there is something specifically to do?
I can't catch your proposal for flashing the other firmware. Can you tell me which exactly firmware I have to flash first, later on to receive BTU Oreo CSC as default?
Click to expand...
Click to collapse
When I flash first MTL CSC android 7 and then flash oreo BTU, will it change my CSC code from XEO to BTU?