my brother flashed twrp with rashr by using option kernel from storage and now my phone does not boot up and boots to recovery mode Iam not being able to reset phone firmware too
thanks in advance
Flash firmware with odin
ud4 said:
Flash firmware with odin
Click to expand...
Click to collapse
already tried!
odin 3.15 stuck at file anaylsis and 3.09 at setup connection
uhzwall said:
already tried!
odin 3.15 stuck at file anaylsis and 3.09 at setup connection
Click to expand...
Click to collapse
That's only solution, if it stucks in setup connection try change cable or reboot again in odin mode or change drivers in windows
---------- Post added at 09:47 AM ---------- Previous post was at 09:45 AM ----------
Also you can try to flash kernel in odin
Related
So I got my note 5 and tried installing clockwork recovery and now my phones bricked. When trying to flash the stock rom using odin, it always crashes and says fail.
Has anyone had the same problem?
It sounds like your phone is running the newer firmware. You have to flash the full ogd firmware, oa6 firmware will not flash over any of the newer ones.
tdunham said:
It sounds like your phone is running the newer firmware. You have to flash the full ogd firmware, oa6 firmware will not flash over any of the newer ones.
Click to expand...
Click to collapse
any idea where to get the OJ6 Firmware
---------- Post added at 06:26 PM ---------- Previous post was at 05:48 PM ----------
hey this guy is legit he got me up and running again all for $20 http://jcunlocks.com/
spenava944 said:
So I got my note 5 and tried installing clockwork recovery and now my phones bricked. When trying to flash the stock rom using odin, it always crashes and says fail.
Has anyone had the same problem?
Click to expand...
Click to collapse
Clockwork recovery isn't supported for the Note 5. Twrp recovery is what you have to use.
At this point, you can try to flash twrp through Odin or get the stock tar and go back to stock and start the root and flash recovery process again.
Yea what he said. Stock via odin and restarting. The easiest thing would be is to download twrp and flash it via odin. The system/rom should be fine it just the recovery
I have tried to install cm12.1 nightly through cyanogen recovery and it got stuck in cyanogen fast bootmode .when I try to power on my device yu logo gets blink and auto turnoffs ...please help me ......in what way can I get back my phone ?? Can customer care solve the issue? :'(
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
arshad145 said:
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
Click to expand...
Click to collapse
No bro ...
While connected to system it cannot detect my device
Have you tried to search for ROMs for your phone model?
Google or Search at www.needrom.com
Take a note....
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
You are going for the most extreme case =/
arshad145 said:
You are going for the most extreme case =/
Click to expand...
Click to collapse
going serious,,,,?
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
arshad145 said:
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
Click to expand...
Click to collapse
Sorry bro....
I thought he is using chinese phone and got mediatek chipset....
---------- Post added at 09:36 AM ---------- Previous post was at 09:27 AM ----------
sai978 said:
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
Click to expand...
Click to collapse
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
aravazhi_mdr said:
Sorry bro
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
Click to expand...
Click to collapse
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
sai978 said:
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
Click to expand...
Click to collapse
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
arshad145 said:
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
Click to expand...
Click to collapse
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
aravazhi_mdr said:
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
Click to expand...
Click to collapse
I will try bro. But my question is can I flash this without unlocking bootloader
sai978 said:
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
Click to expand...
Click to collapse
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
sai978 said:
I will try bro. But my question is can I flash this without unlocking bootloader
Click to expand...
Click to collapse
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
arshad145 said:
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
Click to expand...
Click to collapse
Yes I have . but when I type the command fastboot oem unlock-go it says unable to unlock bootloader and the main thing is I can only enter cyanogen fastbootmode
aravazhi_mdr said:
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
Click to expand...
Click to collapse
Bro which is better to flash?? Boot.img or twrp.img
twrp is better as u can flash whole rom
---------- Post added at 18:14 ---------- Previous post was at 18:13 ----------
boot img will unlock bootloop but not neccessary if u need a working rom
So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now
kuky6789 said:
So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now
Click to expand...
Click to collapse
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery
so u can not go in download mode?
asadnow2k said:
so u can not go in download mode?
Click to expand...
Click to collapse
I can get into download mode yes, but not into recovery?
yasteellutch said:
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery
Click to expand...
Click to collapse
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?
kuky6789 said:
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?
Click to expand...
Click to collapse
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved
yasteellutch said:
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved
Click to expand...
Click to collapse
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou
kuky6789 said:
I can get into download mode yes, but not into recovery?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24459283995310257
flash with this firmware and post results.
kuky6789 said:
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou
Click to expand...
Click to collapse
Np
---------- Post added at 10:29 AM ---------- Previous post was at 10:28 AM ----------
yasteellutch said:
Np
Click to expand...
Click to collapse
Be careful next time
To be completely honest I realy don't have a clue what I was doing lol but anyhow It boots up with red letters up top saying custom binary blocked by frp lock what's can i do to fix it I'm new to all this thanks in advance
What you have done is after changing your recovery you have gone to developer options and unticked OEM unlocking after that you have rebooted. To fix this flash lollipop/marshmallow pda file through odin.
Prashanthc said:
What you have done is after changing your recovery you have gone to developer options and unticked OEM unlocking after that you have rebooted. To fix this flash lollipop/marshmallow pda file through odin.
Click to expand...
Click to collapse
Okay thanks I'll give it a try hope I can fix it is just learned about rooting so I'm in the learning proses
I think I bricked my phone.
Same thing happened to me. My little daughter unticked OEM unlock i didn't know. Now phone is not booting. Flashing MM firmware by odin fails. Smart switch says unsupported mobile. Any help will be helpful.
This work to me, in my galaxy sm-j710mn , only follow the steps and flash the recovery
I unbricked mine when i did that by reflashing back to stock firmware. Just have to leave the oem unlock tab alone after your done rooting or have twrp.
---------- Post added at 03:47 PM ---------- Previous post was at 03:44 PM ----------
bichitrax said:
Same thing happened to me. My little daughter unticked OEM unlock i didn't know. Now phone is not booting. Flashing MM firmware by odin fails. Smart switch says unsupported mobile. Any help will be helpful.
Click to expand...
Click to collapse
Try flashing with a different version of odin. If nothing happens try a different computer or reinstalled samsung drivers and restart.
Davidargentina said:
This work to me, in my galaxy sm-j710mn , only follow the steps and flash the recovery
Click to expand...
Click to collapse
Thaks friend..anyway I managed to get rid by flashing the latest firmware through odin.
---------- Post added at 03:59 PM ---------- Previous post was at 03:53 PM ----------
---------- Post added at 03:47 PM ---------- Previous post was at 03:44 PM ----------
[/COLOR]
Try flashing with a different version of odin. If nothing happens try a different computer or reinstalled samsung drivers and restart.[/QUOTE]
Thanks for help..BTW I managed to boot by flashing only latest firmware.
Use smart switch emergency software recovery in download mode. See if it helps.
rajnikant574 said:
Use smart switch emergency software recovery in download mode. See if it helps.
Click to expand...
Click to collapse
I was able to boot after flashing the latest firmware.
BTW smart switch could not recognise my device at that time.
I tried to flash the Stock Firmware from Phone Storage (FAILED AFTER FEW SECS) Flash Stock Firmware and custom rom which is PROJECT SPECTERUM from SD Card (FAILED WITHIN 1 SEC)
I tried using QualCom FlashTool still bootloops. I tried many Firmwares I Have like 5 in my PC none of them works. My recovery is now on stock and my Fastboot is now locked after flashing via QualCom Flashtool. My ColorOS recovery says v1.2 (Rooted) I've been flashing stock firmwares without any luck. I just want to use my phone regularly. I no longer want a rooted phone. Can someone help please?
just flash project spectrum rom with stock recovery
---------- Post added at 08:45 AM ---------- Previous post was at 08:41 AM ----------
it will be good luck
[email protected] said:
just flash project spectrum rom with stock recovery
---------- post added at 08:45 am ---------- previous post was at 08:41 am ----------
it will be good luck
Click to expand...
Click to collapse
after i flash that it will work?
yes..
[email protected] said:
yes..
Click to expand...
Click to collapse
it didn't worked
jhondharen said:
it didn't worked
Click to expand...
Click to collapse
Installation failed also
keep trying to install spectrum with stock recovery. it might fail a couple times but keep trying. once done then flash colour os WITHOUT wiping data or cache