Bootloop F1f PLEASE HELP!!!!!! - Oppo F1

I tried to flash the Stock Firmware from Phone Storage (FAILED AFTER FEW SECS) Flash Stock Firmware and custom rom which is PROJECT SPECTERUM from SD Card (FAILED WITHIN 1 SEC)
I tried using QualCom FlashTool still bootloops. I tried many Firmwares I Have like 5 in my PC none of them works. My recovery is now on stock and my Fastboot is now locked after flashing via QualCom Flashtool. My ColorOS recovery says v1.2 (Rooted) I've been flashing stock firmwares without any luck. I just want to use my phone regularly. I no longer want a rooted phone. Can someone help please?

just flash project spectrum rom with stock recovery
---------- Post added at 08:45 AM ---------- Previous post was at 08:41 AM ----------
it will be good luck

[email protected] said:
just flash project spectrum rom with stock recovery
---------- post added at 08:45 am ---------- previous post was at 08:41 am ----------
it will be good luck
Click to expand...
Click to collapse
after i flash that it will work?

yes..

[email protected] said:
yes..
Click to expand...
Click to collapse
it didn't worked

jhondharen said:
it didn't worked
Click to expand...
Click to collapse
Installation failed also

keep trying to install spectrum with stock recovery. it might fail a couple times but keep trying. once done then flash colour os WITHOUT wiping data or cache

Related

[GUIDE]Downgrade the undowngradeable phones

Hi guys,
I'm very prowed to say that I succesfully downgraded my phone.
I nearly tried everything and nothing worked, always blackscreen
when booting with the old gb bootloader.
The probleme is that some p920s need a special
x-loader and u-boot file which nobody backed up. I just
got them and now restoring to gb will work for everyone.
Use this files too if you've downgraded from su760 ics port
and your having problems with network.
How to make your phone work on gb again:
1. Download this and extract:
mmcblk0p1-4
2. flash complere bootv21e when you are on ics
3. then go into fastboot mode with wkparks omap tool
4. open cmd and go into the directory with the downloaded files
5. type:
fastboot flash u-boot u-boot.img
fastboot flash x-loader x-loader.img
fastboot reboot
6. fix your imei
hope it works for you for me worked nothing else
WOW its working Thank u very much
menasamir said:
WOW its working Thank u very much
Click to expand...
Click to collapse
no problem
berni987654321 said:
Hi guys,
I'm very prowed to say that I succesfully downgraded my phone.
I nearly tried everything and nothing worked, always blackscreen
with booting with the old gb bootloader.
Half a hour I read xbsals post the one whiches phones don't boot
after flashing the gb bootloaders would need a special bin which nobody has
because nobody made a backup. But then I remembered my post in samnos thread about downgrading from wrong flashed ics leaks with my first 4 partitions attached.
Do how to make your phone work on gb again:
1. Download this and extract:
mmcblk0p1-4
2. flash complere bootv21e when you are on ics
3. then go into fastboot mode with wkparts omap tool
4. open cmd and go into the directory with the downloaded files
5. type fastboot flash u-boot u-boot.img
fastboot flash x-loader x-loader.img
fastboot flash nv1 nv1.img
fastboot flash nv2 nv2.img
fastboot reboot
6. fix your imei
hope it works for you for me worked nothing else
Click to expand...
Click to collapse
berni987654321 I have to thank you I have been using your u-boot.img and x-loader.imgfor a number of weeks it's helped me out on numerous occasions btw I have flashed only u-boot.img and x-loader.img and not nv1 and nv2 and not had to restore IMEI.
using this -P920 Backup Of mmcblk0p1-4 - http://forum.xda-developers.com/atta...8&d=1347623892 (Thanks berni)
This is how I fixed my downgrade problems thanks to you http://forum.xda-developers.com/showpost.php?p=34622060&postcount=909
i'm very happy too that I uploaded the files elseway I would be self stucked on ics
berni987654321 said:
i'm very happy too that I uploaded the files elseway I would be self stucked on ics
Click to expand...
Click to collapse
Likewise mate I stumbled across it after xbsall bootv21e did not work for me then I remembered samno's partition test which in turn led me to your files, I'm so grateful you backed these up. :highfive:
---------- Post added at 01:15 AM ---------- Previous post was at 12:59 AM ----------
have you managed to get CM10 booting yet?
kidkoala_uk said:
Likewise mate I stumbled across it after xbsall bootv21e did not work for me then I remembered samno's partition test which in turn led me to your files, I'm so grateful you backed these up. :highfive:
---------- Post added at 01:15 AM ---------- Previous post was at 12:59 AM ----------
have you managed to get CM10 booting yet?
Click to expand...
Click to collapse
no I flashed bootv21e my backup files and then 21a kdz but it doesn't boot yet, I'm now playing around with my gpt table cause I have probs with internal memory and mounting some partitions in recovery
berni987654321 said:
no I flashed bootv21e my backup files and then 21a kdz but it doesn't boot yet, I'm now playing around with my gpt table cause I have probs with internal memory and mounting some partitions in recovery
Click to expand...
Click to collapse
I had the same problem with internal memory, Booted into recovery and factoryreset/data/nvram wipe fixed it for me.
Thank you berni987654321
It works!
Now I'm sticking to GB until CM10 gets stable.
Should be a sticky imo given the amount of users unable to downgrade from ICS.
berni987654321 said:
no I flashed bootv21e my backup files and then 21a kdz but it doesn't boot yet, I'm now playing around with my gpt table cause I have probs with internal memory and mounting some partitions in recovery
Click to expand...
Click to collapse
is the problem you having has to do with your sdcard reading as damage when switch back to ginerbread from ics?
lordboo03 said:
is the problem you having has to do with your sdcard reading as damage when switch back to ginerbread from ics?
Click to expand...
Click to collapse
yes
lordboo03 said:
is the problem you having has to do with your sdcard reading as damage when switch back to ginerbread from ics?
Click to expand...
Click to collapse
factory reset from recovery should fix this.
kidkoala_uk said:
factory reset from recovery should fix this.
Click to expand...
Click to collapse
i tried that still didn't work
lordboo03 said:
i tried that still didn't work
Click to expand...
Click to collapse
Ok I found that flashing the latest KDZ for my provider when wipes did not work fixed this using recovery method from official LGUpdateTool.
---------- Post added at 01:54 AM ---------- Previous post was at 01:52 AM ----------
lordboo03 said:
i tried that still didn't work
Click to expand...
Click to collapse
Stock recovery or CWM recovery?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
berni987654321 said:
yes
Click to expand...
Click to collapse
this can be fixed
kidkoala_uk said:
Ok I found that flashing the latest KDZ for my provider when wipes did not work fixed this using recovery method from official LGUpdateTool.
---------- Post added at 01:54 AM ---------- Previous post was at 01:52 AM ----------
Stock recovery or CWM recovery?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
this can be fixed
Click to expand...
Click to collapse
will try this now and report back
---------- Post added at 09:11 PM ---------- Previous post was at 08:58 PM ----------
kidkoala_uk said:
Ok I found that flashing the latest KDZ for my provider when wipes did not work fixed this using recovery method from official LGUpdateTool.
---------- Post added at 01:54 AM ---------- Previous post was at 01:52 AM ----------
Stock recovery or CWM recovery?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
this can be fixed
Click to expand...
Click to collapse
cwm recovery going to try stock recovery now
---------- Post added at 09:37 PM ---------- Previous post was at 09:11 PM ----------
no dice i couldn't get it fixed either way have you had any luck berni987654321?
I will try it as soon as i can
Sent from my LG-SU760 using xda app-developers app
Hi guys!
I try this procedure but no success... it stucks on
< waiting for device >
I have an O3D P920H, want to get back on GB...
Actually i can only have the ported ICS, but with no bluetooth, no wifi, no calls, sluggish system, phone heating abnormal...
Thanks for the help!
Guys for the damaged sd card can you format the card cause I got that error and it fixed it
Sent from my LG-P925 using xda app-developers app
SHAMAN.BR said:
Hi guys!
I try this procedure but no success... it stucks on
< waiting for device >
Click to expand...
Click to collapse
Hey guys, good news!!
ITS ALIVEEEE!!!!
Everything its OK!! Finally i could get back to GB with no problems, everything fine, no flaws, no mess...
The message "< waiting for device >" was because i was not on FAST BOOT, but on RECOVERY BOOT:
Just to clarify to someone who needs:
RECOVERY BOOT = no battery, volume UP press, connect USB, put battery (two arrows, sw upgrade)
FAST BOOT = no battery, volume DOWN press, connect USB, put battery (LG logo grayed)
After get into v21e, put usb in debug mode and flash your preferred KDZ or bin/FLS and be happy!
Thanks Berni... You are my hero!

[I9500] Easy way to downgrade from official Lollipop 5.0.1 to official KitKat 4.4.2

If you are having trouble doing the downgrade from Lollipop (5.0.1) to KitKat (4.4.2), like no IMEI (baseband) or directly fails when flashing via Odin, here's the solution (worked for me ):
1) Download the following firmware: www.sammobile.com/firmwares/download/40444/I9500UBUGNJ1_I9500UUBGNJ1_ARO
2) Before flashing the firmware via Odin, make a full wipe to the device (works best with a custom recovery, making wipe data/cache, format system, preload, modem, internal sd card, dalvik, etc). This is the custom recovery that i used: www.mega.co.nz/#!PNZHQSRA!CCnUXXAyCX8tpvc6riBI-mfRj0U3peESpchIYGFC_XY
3) After making a full wipe, reboot into download mode and flash the downloaded firmware, it should make the process without problems.
4) When the process completes successfully (Odin says PASS), wait the device to restart till the Samsung logo appears.
5) Do a hard reboot to the recovery mode by pressing Volume up, Home and Power buttons at the same time.
6) Then make a format factory reset, finally reboot normally.
This process has worked for me, making a downgrade from the official update 5.0.1 (SER - Russia) to this official version 4.4.2 (ARO - Argentina).
Hope it works for you too. If it helped, don't forget to hit the thanks button and comment bellow :good:
It's 100% neccesary to wipe the modem?
martin_carpio17 said:
It's 100% neccesary to wipe the modem?
Click to expand...
Click to collapse
No 100% necesary, but really recommended. I did it along with a full wipe and the downgrade was succesfull, without any issues
elias_gabriel said:
No 100% necesary, but really recommended. I did it along with a full wipe and the downgrade was succesfull, without any issues
Click to expand...
Click to collapse
any one tried ???
Yes please. Another feedback would be awesome ?
At this point I'm wasting my s4 hardware with lollipop
As you said, you were on 5.0.1 official stock, how did you wipe everything as you mentioned because that can only be done by custom recovery. Did u install custom recovery on 5.0.1?
---------- Post added at 01:15 AM ---------- Previous post was at 01:13 AM ----------
skchattha said:
As you said, you were on 5.0.1 official stock, how did you wipe everything as you mentioned because that can only be done by custom recovery. Did u install custom recovery on 5.0.1?
Click to expand...
Click to collapse
currently i am on official 5.0.1 India ROM, no custom recovery , no root, just official. How should i start? pls suggest. Just want to make sure every step is correct when doing.
skchattha said:
As you said, you were on 5.0.1 official stock, how did you wipe everything as you mentioned because that can only be done by custom recovery. Did u install custom recovery on 5.0.1?
---------- Post added at 01:15 AM ---------- Previous post was at 01:13 AM ----------
currently i am on official 5.0.1 India ROM, no custom recovery , no root, just official. How should i start? pls suggest. Just want to make sure every step is correct when doing.
Click to expand...
Click to collapse
Yes, I've installed a custom recovery (CWM 6.0.50) to do all those wipes, btw if your warranty void counter is on 0 and you want to keep that, don't install this and proceed doing the common wipes on stock recovery (format data - factory reset/wipe cache), and try then flashing the recommended firmware. As I said, I recommend to wipe ALL through a custom recovery before flashing the firmware, cause my counter was in 1 and through this method i was able to do a succesfull downgrade
I've uploaded the custom recovery that I used to do a full wipe. Install via Odin (only for people with warranty void counter 1, or which don't care losing warranty / set the counter to 1):
www.mega.co.nz/#!PNZHQSRA!CCnUXXAyCX8tpvc6riBI-mfRj0U3peESpchIYGFC_XY
Thanks a lot my friend, i will try. Fingers crossed..hope all goes well.
---------- Post added at 11:28 PM ---------- Previous post was at 11:26 PM ----------
elias_gabriel said:
I've uploaded the custom recovery that I used to do a full wipe. Install via Odin (only for people with warranty void counter 1, or which don't care losing warranty / set the counter to 1):
mega.co.nz/#!PNZHQSRA!CCnUXXAyCX8tpvc6riBI-mfRj0U3peESpchIYGFC_XY
Click to expand...
Click to collapse
Can you also pls confirm what you all selected in Odin? Thanks
skchattha said:
Can you also pls confirm what you all selected in Odin? Thanks
Click to expand...
Click to collapse
Sorry, what do you mean exactly? Is that i don't understand the question...
Helpful
Thanks for sharing, this will save life of many users !!
skchattha said:
As you said, you were on 5.0.1 official stock, how did you wipe everything as you mentioned because that can only be done by custom recovery. Did u install custom recovery on 5.0.1?
---------- Post added at 01:15 AM ---------- Previous post was at 01:13 AM ----------
currently i am on official 5.0.1 India ROM, no custom recovery , no root, just official. How should i start? pls suggest. Just want to make sure every step is correct when doing.
Click to expand...
Click to collapse
Did this worked for you, please confirm?
codehtm said:
Thanks for sharing, this will save life of many users !!
Click to expand...
Click to collapse
I hope so, you're welcome
any one have kitkat frimware indian version? plz share on google drive!!! need it!!!
---------- Post added at 04:06 PM ---------- Previous post was at 03:43 PM ----------
followed your steps failed!!!!
rinkulsk said:
any one have kitkat frimware indian version? plz share on google drive!!! need it!!!
---------- Post added at 04:06 PM ---------- Previous post was at 03:43 PM ----------
followed your steps failed!!!!
Click to expand...
Click to collapse
Wow, thats pretty strange, cause worked perfectly on my device. Actually i'm on this official 4.4.2 ARO
I downloaded ins firmware and followed your steps but failed!! I want 4.4.2 kit kat can some one mirror on Google drive ?
Sent from my GT-I9500 using XDA Free mobile app
rinkulsk said:
I downloaded ins firmware and followed your steps but failed!!
Click to expand...
Click to collapse
Have you flashed the recommended ARO firmware or another 4.4.2? One more time, this is recommended to downgrade from the russian 5.0.1, I've tested with this one, I don't know if it will work with the indian version.
But I need to be on Indian version bud!
Sent from my GT-I9500 using XDA Free mobile app
rinkulsk said:
But I need to be on Indian version bud!
Click to expand...
Click to collapse
Let me understand... Were you on the indian/russian 5.0.1 and you want to downgrade to an indian 4.4.2? I think it's no possible, like I said, the only firmware that worked for me was the latest ARO I9500UBUGNJ1 firmware.
Am on Indian 5.0 1 and want to downgrade to kitkat
Sent from my GT-I9500 using XDA Free mobile app

MIUI 10 for Mi 5X - 8.7.16 Alpha

China
8.7.2: https://goo.gl/pvoT24
8.7.4: http://bigota.d.miui.com/8.7.4/miui_MI5X_8.7.4_aa6e400516_7.1.zip
8.7.5: http://bigota.d.miui.com/8.7.5/miui_MI5X_8.7.5_23e3fc51c9_7.1.zip
8.7.9: http://bigota.d.miui.com/8.7.9/miui_MI5X_8.7.9_ba83680434_7.1.zip
8.7.16: http://bigota.d.miui.com/8.7.16/miui_MI5X_8.7.16_780ec850bc_7.1.zip
**************************
Global
Source: https://xiaomiui.net
Only English and Chinese
Bug:
- Unknown
Android Version:
7.1
Not Booting after flash. Wiped everything and flashed with TWRP but it doesn't go over the Mi Bootscreen. Moreover it fails mounting /firmware partition, could this be the issue?
R4don said:
Not Booting after flash. Wiped everything and flashed with TWRP but it doesn't go over the Mi Bootscreen. Moreover it fails mounting /firmware partition, could this be the issue?
Click to expand...
Click to collapse
install lazy flasher bro it work for me.
i tried 5 or 6 time flash via TWRP, did everything (wipe,advance wipe,wipe after flash) can do. but always stuck in me/unlock logo. after i flash lazy flasher boot it normally.
---------- Post added at 04:19 AM ---------- Previous post was at 04:14 AM ----------
PIP/selfie portrait/Integration of sestures/quick reply still not working
sdspriyankara said:
install lazy flasher bro it work for me.
i tried 5 or 6 time flash via TWRP, did everything (wipe,advance wipe,wipe after flash) can do. but always stuck in me/unlock logo. after i flash lazy flasher boot it normally.
---------- Post added at 04:19 AM ---------- Previous post was at 04:14 AM ----------
PIP/selfie portrait/Integration of sestures/quick reply still not working
Click to expand...
Click to collapse
Tried flashing lazy flasher (the one downloaded from xda) but it gives me "ERROR: 1" and it doesn't boot as always. Anyway, now it asks me if i want to disable stock recovery replace when i try to reboot, what should i do?
give me lazy flasher.zip and how install it cuz its give me error 1
---------- Post added at 08:45 PM ---------- Previous post was at 08:44 PM ----------
R4don said:
Tried flashing lazy flasher (the one downloaded from xda) but it gives me "ERROR: 1" and it doesn't boot as always. Anyway, now it asks me if i want to disable stock recovery replace when i try to reboot, what should i do?
Click to expand...
Click to collapse
bootloop like meee
Same for me, I tried 3-4 times even with lazy flasher zip it won't boot up. I'm back to Aospextended.
R4don said:
Not Booting after flash. Wiped everything and flashed with TWRP but it doesn't go over the Mi Bootscreen. Moreover it fails mounting /firmware partition, could this be the issue?
Click to expand...
Click to collapse
Finally in the 4th attempt!
Pathania08 said:
Finally in the 4th attempt!
Click to expand...
Click to collapse
can u tell me how u install it cuz i try 8 times without success
After wiping Dalvik cache, system, data and cache just flash the Miui 10 rom file and after that flash the lazy flasher zip file. Then reboot It'll be take around 5-10 minutes to boot.
Here's the lazy flasher zip https://androidfilehost.com/?fid=529152257862700328
hussain ali khan said:
can u tell me how u install it cuz i try 8 times without success
Click to expand...
Click to collapse
Pathania08 said:
After wiping Dalvik cache, system, data and cache just flash the Miui 10 rom file and after that flash the lazy flasher zip file. Then reboot It'll be take around 5-10 minutes to boot.
Here's the lazy flasher zip https://androidfilehost.com/?fid=529152257862700328
Click to expand...
Click to collapse
lazy flasher give me error 1 after installing it
It installed without an error for me! I just followed this tutorial, don't understand that language though ?
hussain ali khan said:
lazy flasher give me error 1 after installing it
Click to expand...
Click to collapse
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
It installed without an error for me! I just followed this tutorial,(
) don't understand that language though ?
hussain ali khan said:
lazy flasher give me error 1 after installing it
Click to expand...
Click to collapse
Pathania08 said:
It installed without an error for me! I just followed this tutorial, don't understand that language though
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
It installed without an error for me! I just followed this tutorial,(
) don't understand that language though
hussain ali khan said:
lazy flasher give me error 1 after installing it
Click to expand...
Click to collapse
idk why lazy flasher give me error 1 every time the rom installed but lazy didint
Click to expand...
Click to collapse
Okay then don't flash the lazy zip file just flash the ROM only and reboot and wait for about 5 minutes when it shows Mi logo and unlocked status.
idk why lazy flasher give me error 1 every time the rom installed but lazy didint
Click to expand...
Click to collapse
Pathania08 said:
Okay then don't flash the lazy zip file just flash the ROM only and reboot and wait for about 5 minutes when it shows Mi logo and unlocked status.
idk why lazy flasher give me error 1 every time the rom installed but lazy didint
Click to expand...
Click to collapse
i waited for it more than 15 min
Click to expand...
Click to collapse
How many times you've tried now? I got lucky in the 4th attempt.
i7 waited for it more than 15 min [/QUOTE]
Pathania08 said:
How many times you've tried now? I got lucky in the 4th attempt.
i7 waited for it more than 15 min
Click to expand...
Click to collapse
[/QUOTE]
7 times :crying:
always see ERROR 1 -_-
thaocut37 said:
always see ERROR 1 -_-
Click to expand...
Click to collapse
which recovery did u use?
mine is twrp coffee and its give me error 1
hussain ali khan said:
which recovery did u use?
mine is twrp coffee and its give me error 1
Click to expand...
Click to collapse
yess. I used COFFACE and when I switched to TWRP 3.2.1 Moded and successfully flashed 8.7.5
---------- Post added at 06:43 PM ---------- Previous post was at 06:43 PM ----------
it's here: https://forum.xda-developers.com/mi-5x/development/twrp-3-2-1-0-oreo-support-t3760038
take long time to flash
any one flash 8.7.5
---------- Post added at 06:16 AM ---------- Previous post was at 06:13 AM ----------
thaocut37 said:
yess. I used COFFACE and when I switched to TWRP 3.2.1 Moded and successfully flashed 8.7.5
---------- Post added at 06:43 PM ---------- Previous post was at 06:43 PM ----------
it's here: https://forum.xda-developers.com/mi-5x/development/twrp-3-2-1-0-oreo-support-t3760038
Click to expand...
Click to collapse
how long take to flash it.
---------- Post added at 06:21 AM ---------- Previous post was at 06:16 AM ----------
thaocut37 said:
yess. I used COFFACE and when I switched to TWRP 3.2.1 Moded and successfully flashed 8.7.5
---------- Post added at 06:43 PM ---------- Previous post was at 06:43 PM ----------
it's here: https://forum.xda-developers.com/mi-5x/development/twrp-3-2-1-0-oreo-support-t3760038
Click to expand...
Click to collapse
how long take to flash it.

Some help needed

Hi, Yesterday I decided to install a custom rom, but I did not like it that well and I decided to go back, but my phone wont start anymore i get in a bootloop someone can give my the right instructions to go back to stock. I can acces cunstom recovery
did you make a back up before flashing the custom rom? This is rule nr1 that you always do a backup bro.
RiTCHiE007 said:
did you make a back up before flashing the custom rom? This is rule nr1 that you always do a backup bro.
Click to expand...
Click to collapse
I know but something whiped my memory strangly i can puse files to cunstom recovery but i results in a bootlop
reinierkramer said:
I know but something whiped my memory strangly i can puse files to cunstom recovery but i results in a bootlop
Click to expand...
Click to collapse
Well, you can always get the official firmware from the oneplus site and flash that from the recovery
---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------
reinierkramer said:
I know but something whiped my memory strangly i can puse files to cunstom recovery but i results in a bootlop
Click to expand...
Click to collapse
here you can grab the official firmwares https://downloads.oneplus.com/devices/oneplus-6/ and flash it from the recovery and be done
RiTCHiE007 said:
Well, you can always get the official firmware from the oneplus site and flash that from the recovery
---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------
here you can grab the official firmwares https://downloads.oneplus.com/devices/oneplus-6/ and flash it from the recovery and be done
Click to expand...
Click to collapse
Allready tried that then i get in a bootlop too
reinierkramer said:
Allready tried that then i get in a bootlop too
Click to expand...
Click to collapse
then try to flash it from adb annd try to flash the boot image first
In the guides section there is a posting for fastboot roms. Use it. It always worked for me
I solved it whith the unbrick guide thanks for the help guys

[FIXED] Need help unbricking the phone.

Hello everyone!
So my friend tried to downgrade his phone from 9.0, to 8.0 and he messed up somewhere so now he's stuck with bricked phone. I think it is soft bricked because i can boot to recovery and to bootloader. I tried to reflash his phone with odin, but i end up with an error something in the lines of write operation failed. Also tried like 3 or 4 diffrent stock roms, nothing worked out.
What i know about the phone:
* Its samsung A8 (SM-A530f/DS)
* OEM lock is still on.
* Debug mode is off (the one in android settings)
* Recovery is still stock (tried to flash TWRP got the same error)
* ADB and fastboot does not pick up the device
* I can boot to the recovery and bootloader (Download mode)
Thank you guys in advance!
Exs7asy said:
Hello everyone!
So my friend tried to downgrade his phone from 9.0, to 8.0 and he messed up somewhere so now he's stuck with bricked phone. I think it is soft bricked because i can boot to recovery and to bootloader. I tried to reflash his phone with odin, but i end up with an error something in the lines of write operation failed. Also tried like 3 or 4 diffrent stock roms, nothing worked out.
What i know about the phone:
* Its samsung A8 (SM-A530f/DS)
* OEM lock is still on.
* Debug mode is off (the one in android settings)
* Recovery is still stock (tried to flash TWRP got the same error)
* ADB and fastboot does not pick up the device
* I can boot to the recovery and bootloader (Download mode)
Thank you guys in advance!
Click to expand...
Click to collapse
So you tried to down grade to 8 with Odin?
What what exactly did you try to flash?
I didnt try to flash it, my friend did that, and i took his phone to fix it. So i dont know what he did, he asked me to fix it and thats what i know. As he said to me he used odin to flash an older stock rom, and he messed up somewhere so the phone is bricked now.
Exs7asy said:
I didnt try to flash it, my friend did that, and i took his phone to fix it. So i dont know what he did, he asked me to fix it and thats what i know. As he said to me he used odin to flash an older stock rom, and he messed up somewhere so the phone is bricked now.
Click to expand...
Click to collapse
Did try a factory reset?
mchlbenner said:
Did try a factory reset?
Click to expand...
Click to collapse
Tried that too, it had no effect, still bricked. In recovery i get some errors. One is "dm-verity verification failed...", and another one "E:[libs_mgr]is_dt_compatible(): firmware info was not valid: '/proc/device-tree/firmware/android/compatible': no such file or directory.
must be FRP lock it happen to me in J7
---------- Post added at 08:56 AM ---------- Previous post was at 08:51 AM ----------
need to download this first and flash
https://combinationfirmware.com/downloads/a530fxxu4asb1/
---------- Post added at 08:56 AM ---------- Previous post was at 08:56 AM ----------
after he need to wipe data cache from recovery
---------- Post added at 08:58 AM ---------- Previous post was at 08:56 AM ----------
and download latest firmware from UPDATO Pie because oreo can have problem and you have 4 files you only need to flash BL, AP and CSC.
Lu Han said:
must be FRP lock it happen to me in J7
---------- Post added at 08:56 AM ---------- Previous post was at 08:51 AM ----------
need to download this first and flash
https://combinationfirmware.com/downloads/a530fxxu4asb1/
---------- Post added at 08:56 AM ---------- Previous post was at 08:56 AM ----------
after he need to wipe data cache from recovery
---------- Post added at 08:58 AM ---------- Previous post was at 08:56 AM ----------
and download latest firmware from UPDATO Pie because oreo can have problem and you have 4 files you only need to flash BL, AP and CSC.
Click to expand...
Click to collapse
I will try that out and report back soon. Thank you.
UPDATE! Everything worked out. Thank you very much!
Exs7asy said:
I will try that out and report back soon. Thank you.
UPDATE! Everything worked out. Thank you very much!
Click to expand...
Click to collapse
plz i have the same probleme can you tell me the steps you did

Categories

Resources