Database Info

[GUIDE]Downgrade the undowngradeable phones

Hi guys,
I'm very prowed to say that I succesfully downgraded my phone.
I nearly tried everything and nothing worked, always blackscreen
when booting with the old gb bootloader.
The probleme is that some p920s need a special
x-loader and u-boot file which nobody backed up. I just
got them and now restoring to gb will work for everyone.
Use this files too if you've downgraded from su760 ics port
and your having problems with network.
How to make your phone work on gb again:
1. Download this and extract:
mmcblk0p1-4
2. flash complere bootv21e when you are on ics
3. then go into fastboot mode with wkparks omap tool
4. open cmd and go into the directory with the downloaded files
5. type:
fastboot flash u-boot u-boot.img
fastboot flash x-loader x-loader.img
fastboot reboot
6. fix your imei
hope it works for you for me worked nothing else

WOW its working Thank u very much

menasamir said:
WOW its working Thank u very much
Click to expand...
Click to collapse
no problem

berni987654321 said:
Hi guys,
I'm very prowed to say that I succesfully downgraded my phone.
I nearly tried everything and nothing worked, always blackscreen
with booting with the old gb bootloader.
Half a hour I read xbsals post the one whiches phones don't boot
after flashing the gb bootloaders would need a special bin which nobody has
because nobody made a backup. But then I remembered my post in samnos thread about downgrading from wrong flashed ics leaks with my first 4 partitions attached.
Do how to make your phone work on gb again:
1. Download this and extract:
mmcblk0p1-4
2. flash complere bootv21e when you are on ics
3. then go into fastboot mode with wkparts omap tool
4. open cmd and go into the directory with the downloaded files
5. type fastboot flash u-boot u-boot.img
fastboot flash x-loader x-loader.img
fastboot flash nv1 nv1.img
fastboot flash nv2 nv2.img
fastboot reboot
6. fix your imei
hope it works for you for me worked nothing else
Click to expand...
Click to collapse
berni987654321 I have to thank you I have been using your u-boot.img and x-loader.imgfor a number of weeks it's helped me out on numerous occasions btw I have flashed only u-boot.img and x-loader.img and not nv1 and nv2 and not had to restore IMEI.
using this -P920 Backup Of mmcblk0p1-4 - http://forum.xda-developers.com/atta...8&d=1347623892 (Thanks berni)
This is how I fixed my downgrade problems thanks to you http://forum.xda-developers.com/showpost.php?p=34622060&postcount=909

i'm very happy too that I uploaded the files elseway I would be self stucked on ics

berni987654321 said:
i'm very happy too that I uploaded the files elseway I would be self stucked on ics
Click to expand...
Click to collapse
Likewise mate I stumbled across it after xbsall bootv21e did not work for me then I remembered samno's partition test which in turn led me to your files, I'm so grateful you backed these up. :highfive:
---------- Post added at 01:15 AM ---------- Previous post was at 12:59 AM ----------
have you managed to get CM10 booting yet?

kidkoala_uk said:
Likewise mate I stumbled across it after xbsall bootv21e did not work for me then I remembered samno's partition test which in turn led me to your files, I'm so grateful you backed these up. :highfive:
---------- Post added at 01:15 AM ---------- Previous post was at 12:59 AM ----------
have you managed to get CM10 booting yet?
Click to expand...
Click to collapse
no I flashed bootv21e my backup files and then 21a kdz but it doesn't boot yet, I'm now playing around with my gpt table cause I have probs with internal memory and mounting some partitions in recovery

berni987654321 said:
no I flashed bootv21e my backup files and then 21a kdz but it doesn't boot yet, I'm now playing around with my gpt table cause I have probs with internal memory and mounting some partitions in recovery
Click to expand...
Click to collapse
I had the same problem with internal memory, Booted into recovery and factoryreset/data/nvram wipe fixed it for me.

Thank you berni987654321
It works!
Now I'm sticking to GB until CM10 gets stable.

Should be a sticky imo given the amount of users unable to downgrade from ICS.

berni987654321 said:
no I flashed bootv21e my backup files and then 21a kdz but it doesn't boot yet, I'm now playing around with my gpt table cause I have probs with internal memory and mounting some partitions in recovery
Click to expand...
Click to collapse
is the problem you having has to do with your sdcard reading as damage when switch back to ginerbread from ics?

lordboo03 said:
is the problem you having has to do with your sdcard reading as damage when switch back to ginerbread from ics?
Click to expand...
Click to collapse
yes

lordboo03 said:
is the problem you having has to do with your sdcard reading as damage when switch back to ginerbread from ics?
Click to expand...
Click to collapse
factory reset from recovery should fix this.

kidkoala_uk said:
factory reset from recovery should fix this.
Click to expand...
Click to collapse
i tried that still didn't work

lordboo03 said:
i tried that still didn't work
Click to expand...
Click to collapse
Ok I found that flashing the latest KDZ for my provider when wipes did not work fixed this using recovery method from official LGUpdateTool.
---------- Post added at 01:54 AM ---------- Previous post was at 01:52 AM ----------
lordboo03 said:
i tried that still didn't work
Click to expand...
Click to collapse
Stock recovery or CWM recovery?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
berni987654321 said:
yes
Click to expand...
Click to collapse
this can be fixed

kidkoala_uk said:
Ok I found that flashing the latest KDZ for my provider when wipes did not work fixed this using recovery method from official LGUpdateTool.
---------- Post added at 01:54 AM ---------- Previous post was at 01:52 AM ----------
Stock recovery or CWM recovery?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
this can be fixed
Click to expand...
Click to collapse
will try this now and report back
---------- Post added at 09:11 PM ---------- Previous post was at 08:58 PM ----------
kidkoala_uk said:
Ok I found that flashing the latest KDZ for my provider when wipes did not work fixed this using recovery method from official LGUpdateTool.
---------- Post added at 01:54 AM ---------- Previous post was at 01:52 AM ----------
Stock recovery or CWM recovery?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
this can be fixed
Click to expand...
Click to collapse
cwm recovery going to try stock recovery now
---------- Post added at 09:37 PM ---------- Previous post was at 09:11 PM ----------
no dice i couldn't get it fixed either way have you had any luck berni987654321?

I will try it as soon as i can
Sent from my LG-SU760 using xda app-developers app

Hi guys!
I try this procedure but no success... it stucks on
< waiting for device >
I have an O3D P920H, want to get back on GB...
Actually i can only have the ported ICS, but with no bluetooth, no wifi, no calls, sluggish system, phone heating abnormal...
Thanks for the help!

Guys for the damaged sd card can you format the card cause I got that error and it fixed it
Sent from my LG-P925 using xda app-developers app

SHAMAN.BR said:
Hi guys!
I try this procedure but no success... it stucks on
< waiting for device >
Click to expand...
Click to collapse
Hey guys, good news!!
ITS ALIVEEEE!!!!
Everything its OK!! Finally i could get back to GB with no problems, everything fine, no flaws, no mess...
The message "< waiting for device >" was because i was not on FAST BOOT, but on RECOVERY BOOT:
Just to clarify to someone who needs:
RECOVERY BOOT = no battery, volume UP press, connect USB, put battery (two arrows, sw upgrade)
FAST BOOT = no battery, volume DOWN press, connect USB, put battery (LG logo grayed)
After get into v21e, put usb in debug mode and flash your preferred KDZ or bin/FLS and be happy!
Thanks Berni... You are my hero!

[Q] CM12S Fastboot Image from Cyngn.com

http://builds.cyngn.com/cyanogen-os.../cm-12.0-YNG1TAS0YL-bacon-signed-fastboot.zip
yet there's not userdata_64G.img
the md5 is similar with MEGA leak https://mega.co.nz/#!wFdAlboC!xIBIlx...Ft1OGMLJjQwkfA and https://www.androidfilehost.com/?fid=95916177934554833 by android police
yet difference from https://www.androidfilehost.com/?fid=95916177934554834
Any clues?

taufiqs said:
http://builds.cyngn.com/cyanogen-os...263178b74/cm-12.0-YNG1TAS0YL-bacon-signed.zip
yet there's not userdata_64G.img
the md5 is similar with MEGA leak https://mega.co.nz/#!wFdAlboC!xIBIlx...Ft1OGMLJjQwkfA and https://www.androidfilehost.com/?fid=95916177934554833 by android police
yet difference from https://www.androidfilehost.com/?fid=95916177934554834
Any clues?
Click to expand...
Click to collapse
Thats not a fastboot image friend. Its a OTA zip. The factory fastboot image for Cyanogen OS 12 aren't available yet.
---------- Post added at 12:43 PM ---------- Previous post was at 12:40 PM ----------
The best thing to do if you want to start fresh is to download and install a previous KitKat fastboot image of CM11S and then install the official Cyanogen OS 12 Lollipop OTA zip you have linked above through CM Recovery.

FYI, from the forum rules:
5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer. (Also refer to Rule 16)
Click to expand...
Click to collapse

Bilhouse said:
Thats not a fastboot image friend. Its a OTA zip. The factory fastboot image for Cyanogen OS 12 aren't available yet.
---------- Post added at 12:43 PM ---------- Previous post was at 12:40 PM ----------
The best thing to do if you want to start fresh is to download and install a previous KitKat fastboot image of CM11S and then install the official Cyanogen OS 12 Lollipop OTA zip you have linked above through CM Recovery.
Click to expand...
Click to collapse
Yes i think so. btw, the contents are quite difference to other OTA zip (it's just like fastboot image but not complete).

CafeKampuchia said:
FYI, from the forum rules:
Click to expand...
Click to collapse
to be understood. I have deleted the other post.

CafeKampuchia said:
FYI, from the forum rules:
Click to expand...
Click to collapse
Who is that in reference to?
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
taufiqs said:
Yes i think so. btw, the contents are quite difference to other OTA zip (it's just like fastboot image but not complete).
Click to expand...
Click to collapse
The reason for that is its a major change from KitKat to Lollipop.

Bilhouse said:
Who is that in reference to?
Click to expand...
Click to collapse
The OP posted the same question in two other threads then started this one.
---------- Post added at 06:51 PM ---------- Previous post was at 06:48 PM ----------
Bilhouse said:
Thats not a fastboot image friend. Its a OTA zip. The factory fastboot image for Cyanogen OS 12 aren't available yet.
---------- Post added at 12:43 PM ---------- Previous post was at 12:40 PM ----------
The best thing to do if you want to start fresh is to download and install a previous KitKat fastboot image of CM11S and then install the official Cyanogen OS 12 Lollipop OTA zip you have linked above through CM Recovery.
Click to expand...
Click to collapse
Actually not true. Both are the full factory image and can be flashed even after wiping /system and /data. The difference is the TWRP version has been modified by removing a script so it will work reliably when flashed with TWRP.

CafeKampuchia said:
The OP posted the same question in two other threads then started this one.
---------- Post added at 06:51 PM ---------- Previous post was at 06:48 PM ----------
Actually not true. Both are the full factory image and can be flashed even after wiping /system and /data. The difference is the TWRP version has been modified by removing a script so it will work reliably when flashed with TWRP.
Click to expand...
Click to collapse
Those aren't fastboot images which he linked.

so it can be flashed using stock recovery?
i have corrected the link name, it should be ended with xxxx-fastboot.zip

have been corrected
http://builds.cyngn.com/cyanogen-os.../cm-12.0-YNG1TAS0YL-bacon-signed-fastboot.zip

taufiqs said:
http://builds.cyngn.com/cyanogen-os.../cm-12.0-YNG1TAS0YL-bacon-signed-fastboot.zip
yet there's not userdata_64G.img
the md5 is similar with MEGA leak https://mega.co.nz/#!wFdAlboC!xIBIlx...Ft1OGMLJjQwkfA and https://www.androidfilehost.com/?fid=95916177934554833 by android police
yet difference from https://www.androidfilehost.com/?fid=95916177934554834
Any clues?
Click to expand...
Click to collapse
Those userdata.img and userdata_64G.img are same in 44S and 05Q. userdata.img in lollipop is same as 44S and 05Q. So you can use userdata_64G.img from any of 44S and 05Q.

Bilhouse said:
Those aren't fastboot images which he linked.
Click to expand...
Click to collapse
Correct. Both are flashable zip files.

CafeKampuchia said:
Correct. Both are flashable zip files.
Click to expand...
Click to collapse
Sorry for it. Then how about the fastboot. It should be installed from the bootloader right?
The previous one are flashable via recovery.

taufiqs said:
Sorry for it. Then how about the fastboot. It should be installed from the bootloader right?
The previous one are flashable via recovery.
Click to expand...
Click to collapse
yes

http://forum.xda-developers.com/oneplus-one/general/guide-stock-cm12s-installation-fastboot-t3082113

droid.riz said:
http://forum.xda-developers.com/oneplus-one/general/guide-stock-cm12s-installation-fastboot-t3082113
Click to expand...
Click to collapse
Or anyone could go to my guide thread, where you copied these instructions from.
Transmitted via Bacon

STEPS TO INSTALL CM12S OFFICIAL ROMS (IF you are running CM11S)
Firstly ensure that your Oneplus One device has the bootloader unlocked and you have the latest build of TeamWin Recovery Installed which is
openrecovery-twrp-2.8.5.1-bacon.img
Threads to install this can be found on xda
Next you need to do the following
1. Switch of your phone
2. Press down volume button and power button
3. Enter TeamWin recovery
4. Wipe factory data reset
5. Install / Flash the CM12S file which is openrecovery-twrp-2.8.5.1-bacon (584MB) - hope you have downloaded this from the the link given on this thread by Taufiq.
PS:Important thin to remember if you are getting an error while flashing this ROM file then you first need to update your TeamWin recovery version.
I was on 2.8.0.1 and it gave me an error to install this, but when I updated the Teamwin recovery to 2.8.5.1 and tried to flash it it worked perfectly fine.
All the best and enjoy the official CM12S for Oneplus..It rocks!!!

S6 BRICKED? Boot Loop

So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now

kuky6789 said:
So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now
Click to expand...
Click to collapse
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery

so u can not go in download mode?

asadnow2k said:
so u can not go in download mode?
Click to expand...
Click to collapse
I can get into download mode yes, but not into recovery?

yasteellutch said:
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery
Click to expand...
Click to collapse
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?

kuky6789 said:
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?
Click to expand...
Click to collapse
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved

yasteellutch said:
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved
Click to expand...
Click to collapse
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou

kuky6789 said:
I can get into download mode yes, but not into recovery?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24459283995310257
flash with this firmware and post results.

kuky6789 said:
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou
Click to expand...
Click to collapse
Np
---------- Post added at 10:29 AM ---------- Previous post was at 10:28 AM ----------
yasteellutch said:
Np
Click to expand...
Click to collapse
Be careful next time

Bootloop F1f PLEASE HELP!!!!!!

I tried to flash the Stock Firmware from Phone Storage (FAILED AFTER FEW SECS) Flash Stock Firmware and custom rom which is PROJECT SPECTERUM from SD Card (FAILED WITHIN 1 SEC)
I tried using QualCom FlashTool still bootloops. I tried many Firmwares I Have like 5 in my PC none of them works. My recovery is now on stock and my Fastboot is now locked after flashing via QualCom Flashtool. My ColorOS recovery says v1.2 (Rooted) I've been flashing stock firmwares without any luck. I just want to use my phone regularly. I no longer want a rooted phone. Can someone help please?

just flash project spectrum rom with stock recovery
---------- Post added at 08:45 AM ---------- Previous post was at 08:41 AM ----------
it will be good luck

[email protected] said:
just flash project spectrum rom with stock recovery
---------- post added at 08:45 am ---------- previous post was at 08:41 am ----------
it will be good luck
Click to expand...
Click to collapse
after i flash that it will work?

yes..

[email protected] said:
yes..
Click to expand...
Click to collapse
it didn't worked

jhondharen said:
it didn't worked
Click to expand...
Click to collapse
Installation failed also

keep trying to install spectrum with stock recovery. it might fail a couple times but keep trying. once done then flash colour os WITHOUT wiping data or cache

MIUI 10 for Mi 5X - 8.7.16 Alpha

China
8.7.2: https://goo.gl/pvoT24
8.7.4: http://bigota.d.miui.com/8.7.4/miui_MI5X_8.7.4_aa6e400516_7.1.zip
8.7.5: http://bigota.d.miui.com/8.7.5/miui_MI5X_8.7.5_23e3fc51c9_7.1.zip
8.7.9: http://bigota.d.miui.com/8.7.9/miui_MI5X_8.7.9_ba83680434_7.1.zip
8.7.16: http://bigota.d.miui.com/8.7.16/miui_MI5X_8.7.16_780ec850bc_7.1.zip
**************************
Global
Source: https://xiaomiui.net
Only English and Chinese
Bug:
- Unknown
Android Version:
7.1

Not Booting after flash. Wiped everything and flashed with TWRP but it doesn't go over the Mi Bootscreen. Moreover it fails mounting /firmware partition, could this be the issue?

R4don said:
Not Booting after flash. Wiped everything and flashed with TWRP but it doesn't go over the Mi Bootscreen. Moreover it fails mounting /firmware partition, could this be the issue?
Click to expand...
Click to collapse
install lazy flasher bro it work for me.
i tried 5 or 6 time flash via TWRP, did everything (wipe,advance wipe,wipe after flash) can do. but always stuck in me/unlock logo. after i flash lazy flasher boot it normally.
---------- Post added at 04:19 AM ---------- Previous post was at 04:14 AM ----------
PIP/selfie portrait/Integration of sestures/quick reply still not working

sdspriyankara said:
install lazy flasher bro it work for me.
i tried 5 or 6 time flash via TWRP, did everything (wipe,advance wipe,wipe after flash) can do. but always stuck in me/unlock logo. after i flash lazy flasher boot it normally.
---------- Post added at 04:19 AM ---------- Previous post was at 04:14 AM ----------
PIP/selfie portrait/Integration of sestures/quick reply still not working
Click to expand...
Click to collapse
Tried flashing lazy flasher (the one downloaded from xda) but it gives me "ERROR: 1" and it doesn't boot as always. Anyway, now it asks me if i want to disable stock recovery replace when i try to reboot, what should i do?

give me lazy flasher.zip and how install it cuz its give me error 1
---------- Post added at 08:45 PM ---------- Previous post was at 08:44 PM ----------
R4don said:
Tried flashing lazy flasher (the one downloaded from xda) but it gives me "ERROR: 1" and it doesn't boot as always. Anyway, now it asks me if i want to disable stock recovery replace when i try to reboot, what should i do?
Click to expand...
Click to collapse
bootloop like meee

Same for me, I tried 3-4 times even with lazy flasher zip it won't boot up. I'm back to Aospextended.
R4don said:
Not Booting after flash. Wiped everything and flashed with TWRP but it doesn't go over the Mi Bootscreen. Moreover it fails mounting /firmware partition, could this be the issue?
Click to expand...
Click to collapse

Finally in the 4th attempt!

Pathania08 said:
Finally in the 4th attempt!
Click to expand...
Click to collapse
can u tell me how u install it cuz i try 8 times without success

After wiping Dalvik cache, system, data and cache just flash the Miui 10 rom file and after that flash the lazy flasher zip file. Then reboot It'll be take around 5-10 minutes to boot.
Here's the lazy flasher zip https://androidfilehost.com/?fid=529152257862700328
hussain ali khan said:
can u tell me how u install it cuz i try 8 times without success
Click to expand...
Click to collapse

Pathania08 said:
After wiping Dalvik cache, system, data and cache just flash the Miui 10 rom file and after that flash the lazy flasher zip file. Then reboot It'll be take around 5-10 minutes to boot.
Here's the lazy flasher zip https://androidfilehost.com/?fid=529152257862700328
Click to expand...
Click to collapse
lazy flasher give me error 1 after installing it

It installed without an error for me! I just followed this tutorial, don't understand that language though ?
hussain ali khan said:
lazy flasher give me error 1 after installing it
Click to expand...
Click to collapse
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
It installed without an error for me! I just followed this tutorial,(
) don't understand that language though ?
hussain ali khan said:
lazy flasher give me error 1 after installing it
Click to expand...
Click to collapse

Pathania08 said:
It installed without an error for me! I just followed this tutorial, don't understand that language though
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
It installed without an error for me! I just followed this tutorial,(
) don't understand that language though
hussain ali khan said:
lazy flasher give me error 1 after installing it
Click to expand...
Click to collapse
idk why lazy flasher give me error 1 every time the rom installed but lazy didint
Click to expand...
Click to collapse

Okay then don't flash the lazy zip file just flash the ROM only and reboot and wait for about 5 minutes when it shows Mi logo and unlocked status.
idk why lazy flasher give me error 1 every time the rom installed but lazy didint
Click to expand...
Click to collapse

Pathania08 said:
Okay then don't flash the lazy zip file just flash the ROM only and reboot and wait for about 5 minutes when it shows Mi logo and unlocked status.
idk why lazy flasher give me error 1 every time the rom installed but lazy didint
Click to expand...
Click to collapse
i waited for it more than 15 min
Click to expand...
Click to collapse

How many times you've tried now? I got lucky in the 4th attempt.
i7 waited for it more than 15 min [/QUOTE]

Pathania08 said:
How many times you've tried now? I got lucky in the 4th attempt.
i7 waited for it more than 15 min
Click to expand...
Click to collapse
[/QUOTE]
7 times :crying:

always see ERROR 1 -_-

thaocut37 said:
always see ERROR 1 -_-
Click to expand...
Click to collapse
which recovery did u use?
mine is twrp coffee and its give me error 1

hussain ali khan said:
which recovery did u use?
mine is twrp coffee and its give me error 1
Click to expand...
Click to collapse
yess. I used COFFACE and when I switched to TWRP 3.2.1 Moded and successfully flashed 8.7.5
---------- Post added at 06:43 PM ---------- Previous post was at 06:43 PM ----------
it's here: https://forum.xda-developers.com/mi-5x/development/twrp-3-2-1-0-oreo-support-t3760038

take long time to flash
any one flash 8.7.5
---------- Post added at 06:16 AM ---------- Previous post was at 06:13 AM ----------
thaocut37 said:
yess. I used COFFACE and when I switched to TWRP 3.2.1 Moded and successfully flashed 8.7.5
---------- Post added at 06:43 PM ---------- Previous post was at 06:43 PM ----------
it's here: https://forum.xda-developers.com/mi-5x/development/twrp-3-2-1-0-oreo-support-t3760038
Click to expand...
Click to collapse
how long take to flash it.
---------- Post added at 06:21 AM ---------- Previous post was at 06:16 AM ----------
thaocut37 said:
yess. I used COFFACE and when I switched to TWRP 3.2.1 Moded and successfully flashed 8.7.5
---------- Post added at 06:43 PM ---------- Previous post was at 06:43 PM ----------
it's here: https://forum.xda-developers.com/mi-5x/development/twrp-3-2-1-0-oreo-support-t3760038
Click to expand...
Click to collapse
how long take to flash it.