Galaxy note 8 at&t dont update since jun 2018.. help - AT&T Samsung Galaxy Note 8 Questions & Answers

i got this version of rom (n950usqu4crf3) carrier at&t
i try to update my phone via odin different roms.
wont let me install them they all stock..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/009> Removed!!
...
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 6236 M
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
<ID:0/009> Removed!!

Related

Tried to make backup with CWM now my phone wont start

I rooted using this method and the phone worked fine. When I tried to do a backup using CWM (from the cwm app menu) the phone restarted and just says SAMSUNG.
I tried to re flash the kernel but I got
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1)
Now when I start my phone I get this.
Edit: flashed VoodooChargeCWM-2.tar then VoodooChargeKernel4.tar.md5 again. Phone working again

Samsung Galaxy S2 GT-I9100 Bricked and cant flash using odin

Samsung Galaxy S2 GT-I9100 Bricked and cant flash using odin
i try to flash cwm using Mobile odin.. after this my device is bricked. when i try odin to flash it show below msg..
Code:
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Complete(Write) operation failed.
<ID:0/020> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
please help me
and i try to flash Siyah-s2-v4.1.5.tar but it also show below error
Code:
<ID:0/021> Added!!
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Initialzation..
<ID:0/021> Get PIT for mapping..
<ID:0/021> Firmware update start..
<ID:0/021> zImage
<ID:0/021> Complete(Write) operation failed.
<ID:0/021> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

[Completed] Where do i find the right modem to flash [ n00b help ]

Hi guys, i have flashed Russia firmware[I9500XXUHOH7_I9500SERHOH7_SER - if it does even matter ] for i9500 ( i'm from romania ) and i can't find the right modem to flash as mobile data doesn't work and wi-fi wouldn't turn on at all. My baseband is XXUHOD4 and i couldn't find it on the i9500 modem threads or anywhere similar, like XXUH*** as i heard it's compatible aswell.
Please read everything before doing anything else. Ask for more information, i'd appreciate some fast help
UP : I have tried to flash some modems, XXUHOD7 and XXUHOE2 but odin fails everytime, here is the log.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I did nothing else to phone but to root it and backup EFS. I have TWRP !
Hi and thank you for using XDA Assist
I saw you already posted into a right section so i'm gonna close this thread now.
Good luck!

Galaxy S6 (SM-G920F) BRICKED. Please help.

Hello,
i have an issue with my Galaxy S6 (SM-G920F UK VOD) i believe it to be bricked, and not soft bricked. i can't get the phone to boot no matter what i try.
It all started after i had rooted the device, the root was successful and worked a treat until i decided i would like to play about with twrp. now i can't locate E/ and there does not seem to be any contents inside of the system folder.
Any help would be greatly appreciated and sorry if i have left out any important info.
I don't know if this is important but i have a recovery log.
pastebin com /PKE5fzgJ
trying to flash stock firmware using odin v3.10
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Installing TWRP on S7

Hello,
I have been trying to install TWRP on my T-mumble S7, no luck. I have the lastest version of odin, and have played round-robin with the usb ports. This is my Odin log
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would awesome
Did you root first?
Sent from my SM-G930F using Tapatalk
T-Mobile US? You have the Snapdragon processor?
Then as far as I know it is not possible to flash custom Recovery...

Categories

Resources