Related
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
The very first thing you have to do is to unlock your bootloader if you want root.
It's not possible for Moto G3 I think..
adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
i also have same problm plz help....
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
I am having the problem with link2sd app whenever I tried to integrate any app into system and reboot my device it completely remove that app from the device ......why its happening
Yousvel said:
The very first thing you have to do is to unlock your bootloader if you want root.
Click to expand...
Click to collapse
Ok.. I know about the whole process of rooting the MOTO G3 is .
I am asking if the SystemLess Root is working on MOTO G3 Marshmallow Update
I have seen some posts where MOTO G3 users have used the SystemLess Root on Lollipop.
sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the Reply.
You weren't clear about whats working great.
Rooted MOTO G3 Marshmallow or SystemLess Root as It is also SuperSu v2.62
I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow
sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Dom3616 said:
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Xt1550 2gb
Android 6.0
2.8.7.0 r5
supersu 2.62 flashable zip
All links are on xda search them
Sent from my MotoG3 using Tapatalk
sbsharma said:
I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow
Click to expand...
Click to collapse
Thanks For the Reply.
I asked two questions and you replied only to one or to Both.
It confused me.
But Thanks for the HELP.
My xender app does not work after this system update can u plss tell me y???? And wt is the soln
Dom3616 said:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Agree. And the procedures need to fill all the gaps of info that currently exist. For example, after unlocking bootloader, it would have been helpful to know that you need to reboot and let the system rebuild itself (which takes several minutes) before moving on to anything else such booting/flashing TWRP & rooting.
adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
First of all, Systemless Root is Available for MOTO G 3RD GEN.. Just Grab the zip.. No other zip will work except BETA-SuperSU-v2.62-3-20151211162651.zip..
Rooting moto g3 marshmallow
Can Anyone Provide me twrp recovery and systemless supersu for moto g3 marshmallow?
Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)
Persechini said:
Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)
Click to expand...
Click to collapse
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??
gregferns said:
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??
Click to expand...
Click to collapse
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!
acejavelin said:
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!
Click to expand...
Click to collapse
I never do auto rooting... I always follow the guides for any phone.... I was just enquiring of him if he had done it that way ????
As to your 2nd point I had done a TWRP of my stock rom for the merlin,,, and then like a dumbass i had kept it on my sd card (64gb ) which suddenly decided to die on me.... so i lost that...
Anyway,, when i try to put back my MOTO GTE to stock, i will flash the firmware and then try the systemless root,,, have never done that before..
thanks for the stepby step guide..
cheers
Greg
The easiest method to obtain root or unlocks or update or downgrade unlocked bootloaders can be found below they were updated December of 2021
EMMC 15 Unlocking Bootloader
2022_VZW_EMMC_15_ AIO_Tool To Unlock_Bootloader+Install_TWRP And MM_QL1_Rooted_Rom Works On Any Version Bootloaders_MM_LL_KK-Reactivation Lock Remover
This Process Will Root Phone Unlock Your VZW EMMC 15 Chipset Bootloader Install TWRP Recobery And Imstall Latest QL1 Stock Rom . Downloads S5_Root_Tools_2023.7z EMMC_15_Rom.zip -- Stock QL1 6.0 Directions For Unlocking Stock Phone I would...
forum.xda-developers.com
EMMC 15 Updating Unlocked Bootloaders Or Downgrading
2022_VZW_EMMC_15_Chipset For Unlocked Dev BL To Downgrade To LL_KK Or Upgrade To MM_And Keep Unlock Bootloader
This Process Will Update Or Downgrade Your VZW EMMC Chipset DEV Aboot Bootloader Unlocked S5 To Marshmallow 6.0 Lollipop 5.0 Or Kitkat 4.2 or 4.4 Root And Unlock Instructions Can Be Found Here EMMC 15 Rooting And Bootloader Unlocking EMMC 11...
forum.xda-developers.com
For Rooting EMMC 11 Phones
2021_VZW_Locked_Bootloader_EMMC_11_Rooted/NonRooted_Roms_With_Safestrap_MM_LL_KK
This Process Will Install On The EMMC_11 Locked Bootloader Verizon S5 Marshmallow QL1 Stock Rom NonRooted With Safestrap. Lollipop PB1 Stock Rom Rooted With Safestrap. KK Rom Rooted With Safestrap What This Does This gives you the ability to...
forum.xda-developers.com
Downgrade Files
Any Prerooted PB1 Rom
PB1_Firmware_With_PB1_Bootloader_CAUTION.zip
Place rom and PB1_Firmware_With_PB1_Bootloader_CAUTION.zip on phone
Wipe Data/System/Cache
Flash Rom
Flash PB1_Firmware_With_PB1_Bootloader_CAUTION.zip
your done. You dont need to worry about safestrap zip because you will be rooted again
Weird.....so we'll have a we can flash any Custom MM Rom......but it won't be Rooted. Progress!
Stupifier said:
Weird.....so we'll have a we can flash any Custom MM Rom......but it won't be Rooted. Progress!
Click to expand...
Click to collapse
Always need root just to install custom roms . If we can install roms without root , then we don't need root anymore ( I am still lost ). Now I can wait for custom 6.1 roms.
Its not ideal but at least you dont have to go through the whole reroot process each time you want to change roms. And you can still flash zips etc in safestrap.
Reserved
Can we run and use apps which require ROOT access?
I'm a bit confused though. Don't custom ROMs come pre-rooted???? So wouldn't flashing a custom ROM which is pre-rooted....... remain rooted?
Stupifier said:
Can we run and use apps which require ROOT access?
I'm a bit confused though. Don't custom ROMs come pre-rooted???? So wouldn't flashing a custom ROM which is pre-rooted....... remain rooted?
Click to expand...
Click to collapse
Probably no . It says by @jrkruse the flashed Roms got no root !
Stupifier said:
Can we run and use apps which require ROOT access?
I'm a bit confused though. Don't custom ROMs come pre-rooted???? So wouldn't flashing a custom ROM which is pre-rooted....... remain rooted?
Click to expand...
Click to collapse
alin919 said:
Probably no . It says by @jrkruse the flashed Roms got no root !
Click to expand...
Click to collapse
You cannot have a rooted MM rom with locked bootloader because to have root requires a custom kernel which locked bootloaders cannot flash. It doesnt matter if the rom is prerooted or not! Stock Boot.img means no root. You cannot run apps that require root with these roms All this method does if give you some options the biggest option being the ability to flash zips. and change roms with out having to odin back to stock pb1 then reroot then. Try the stock MM rom I posted. Once installed you can flash a debloatzip or a knox removal zip or delete apps from safestrap with the built in file manager If you dont like you can always downgrade back to PB1
jrkruse said:
You cannot have a rooted MM rom with locked bootloader because to have root requires a custom kernel which locked bootloaders cannot flash. It doesnt matter if the rom is prerooted or not! Stock Boot.img means no root. You cannot run apps that require root with these roms All this method does if give you some options the biggest option being the ability to flash zips. and change roms with out having to odin back to stock pb1 then reroot then. Try the stock MM rom I posted. Once installed you can flash a debloatzip or a knox removal zip or delete apps from safestrap with the built in file manager If you dont like you can always downgrade back to PB1
Click to expand...
Click to collapse
That what i thought , this is better than nothing for use with locked bootloaders . Thanks :good:
So has anyone tried it
jrkruse said:
So has anyone tried it
Click to expand...
Click to collapse
I am downloading now, I just got home.
jrkruse said:
So has anyone tried it
Click to expand...
Click to collapse
my wife's computer crashed so i have not i even went to local library and i was now allowed to download there so i have to wait until i get my wife's computer out of shop.
Sent via mobile Verizon S5
@jrkruse How does this work?
Based on my knowledge from reading this, it seems that the kernel finds the checksum of the system partition and then only boots if it is unmodified.
Shouldn't modifying the system partition in the slightest bit throw this checksum off?
Also - modified kernels CAN be flashed on locked bootloaders - just not via Odin. They only won't boot though >.>
jrkruse said:
So has anyone tried it
Click to expand...
Click to collapse
Perfect instructions @jrkruse , thank you ! Is working , it took me 11 minute to boot . Now lets see if everything is working wright .
alin919 said:
Perfect instructions @jrkruse , thank you ! Is working , it took me 11 minute to boot . Now lets see if everything is working wright .
Click to expand...
Click to collapse
So far everything is looking good , i will run today marshmallow to check it out . Tomorrow i will try to downgrade to pb1 to see if working .
Will this method work with FF? Haven't used SS since my SG4 days.
Sent from my SM-G900V using Tapatalk
I got one to try. I have tried it so I know it works
Download this rom
Download my Patch
In safestrap do a manual wipe. Wipe Data,WipeCache,Wipe System
Install Rom
Install patch
This rom Does not flash system.img so you dont need to install safestrap it will stay installed
After patch is installed wipe data and wipe cache and install MM Bootloader zip
Reboot it will take 15 to 20 min to boot
Now you will Have A Note 5 port with working theme support
Hollywood67 said:
Will this method work with FF? Haven't used SS since my SG4 days.
Click to expand...
Click to collapse
No
hey what can i do im on the MM firmware but i flashed something and now my phone just stays at the samsung logo with a blue led light what can i do it wont but up past the samsung logo screen
I prefer the speed and performance of marshmallow on the S7. Where are the correct files I should flash in Odin and which version of Odin should I be using to flash Android 6?
So apparently the camera isn't working after downgrade to 6?
Not something I'm willing to deal with unless the issue has been solved.
You can't downgrade snapdragon S7 models (G930U/T/V/A/P) due to the locked bootloader
Any downgrading would only work on the G930F with OEM unlock
Help root or downgrade or both?
Beanvee7 said:
You can't downgrade snapdragon S7 models (G930U/T/V/A/P) due to the locked bootloader
Any downgrading would only work on the G930F with OEM unlock
Click to expand...
Click to collapse
I have a sm-g930u factory unlocked and Im also trying to get all i need to downgrade from oreo which is havoc on my battery and i dont know if its better to downgrade to laterst nougat or root it and take care of bloatware to help battery drain yet the problem will persist which is that the upgrade is designed for s8 and s9 with octacore processor and the s7 is working harder with a quad core so temp will always be hotter than before and slower than with nougat . Any help with proper step by step in downgrading my factory unlocked phone would be appreciated and any root links as i havent done it in years.
Beanvee7 said:
You can't downgrade snapdragon S7 models (G930U/T/V/A/P) due to the locked bootloader
Any downgrading would only work on the G930F with OEM unlock
Click to expand...
Click to collapse
You can downgrade. You just can't root.
dave678 said:
You can downgrade. You just can't root.
Click to expand...
Click to collapse
thats not true
You can downgrade any version bit loader by flashing the combo firmware and the rooting combo firmware then flash stock nougat system image its basically what the root method is for Rev11/B. If you are just on nougat then you would have to get the combo firmware that matches the bootloader version you have because if you flash my rev11/B root method you are forever stuck on that bootloader and can never use nougat again or have oreo root as there is no eng root boot.img available for oreo root on rev11/B bootloader
jrkruse said:
You can downgrade any version bit loader by flashing the combo firmware and the rooting combo firmware then flash stock nougat system image its basically what the root method is for Rev11/B. If you are just on nougat then you would have to get the combo firmware that matches the bootloader version you have because if you flash my rev11/B root method you are forever stuck on that bootloader and can never use nougat again or have oreo root as there is no eng root boot.img available for oreo root on rev11/B bootloader
Click to expand...
Click to collapse
Oh I meant if you're not rooted.
dave678 said:
Oh I meant if you're not rooted.
Click to expand...
Click to collapse
you can downgrade too marshmallow from any version you have because combo firmware for s7 is marshmallow based and its available for all bootloader versions. You just use the combo bootloaders and boot.img and stock system image then root it
If your still on bit 4 you can just flash stock bit 4 marsmallow and root with marshmallow eng root img
Hi. My s8 plus is at bootloader version 5 now.is possible to flash unlocked version (xaa)? Or change room from Odin? thanks
Also interested. I'm on official Oreo on v5 bootloader on a fresh phone from insurance and trying to get root.
Go to the Verizon section and look there, user @jrkruse has 2 roms posted:
These both work with the new BLv5
Oreo Rom with Xposed/Safestrap; no root
https://forum.xda-developers.com/verizon-galaxy-s8+/development/rom-t3771206
Nougat Rom with Root/Xposed/Safestrap
https://forum.xda-developers.com/ve...nt/root-using-odin-modified-firmware-t3693790
If your wanting root functions these are your only options. While the Oreo doesn't have root, it does have SafeStrap for system file modification and Xposed to run non root plugins.
As far as flashing to U1 firmware there is a thread about flashing to it. You should be able to as long as bootloader matches but don't quote me. I'm still on BL3 and still can flash to U1, root rom, oreo rom, stock rom no problem.
The easiest method to obtain root unlocks or update or downgrade unlocked bootloaders can be found below they were updated December of 2021
EMMC 15 Unlocking Bootloader
2022_VZW_EMMC_15_ AIO_Tool To Unlock_Bootloader+Install_TWRP And MM_QL1_Rooted_Rom Works On Any Version Bootloaders_MM_LL_KK-Reactivation Lock Remover
This Process Will Root Phone Unlock Your VZW EMMC 15 Chipset Bootloader Install TWRP Recobery And Imstall Latest QL1 Stock Rom . Downloads S5_Root_Tools_2023.7z EMMC_15_Rom.zip -- Stock QL1 6.0 Directions For Unlocking Stock Phone I would...
forum.xda-developers.com
EMMC 15 Updating Unlocked Bootloaders Or Downgrading
2022_VZW_EMMC_15_Chipset For Unlocked Dev BL To Downgrade To LL_KK Or Upgrade To MM_And Keep Unlock Bootloader
This Process Will Update Or Downgrade Your VZW EMMC Chipset DEV Aboot Bootloader Unlocked S5 To Marshmallow 6.0 Lollipop 5.0 Or Kitkat 4.2 or 4.4 Root And Unlock Instructions Can Be Found Here EMMC 15 Rooting And Bootloader Unlocking EMMC 11...
forum.xda-developers.com
For Rooting EMMC 11 Phones
2021_VZW_Locked_Bootloader_EMMC_11_Rooted/NonRooted_Roms_With_Safestrap_MM_LL_KK
This Process Will Install On The EMMC_11 Locked Bootloader Verizon S5 Marshmallow QL1 Stock Rom NonRooted With Safestrap. Lollipop PB1 Stock Rom Rooted With Safestrap. KK Rom Rooted With Safestrap What This Does This gives you the ability to...
forum.xda-developers.com
mine
jrkruse said:
Disclaimer
I will not offer much support for this. These methods work and have been around for a long time now
Click to expand...
Click to collapse
Thank you friend, this is an amazing treasure chest with every posable tool needed for moding the Verizon variant s5. I know that you have moved on to new projects and phones a long time ago, so thanks again for taking your time and energy to do this for us.
Sent from my kltevzw using XDA Labs
This is a very good OP @jrkruse! :thumbup:
I know that you had worked hard for both the development as well as the instructions provided.
Kudos My Friend!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.
Just a simple question.
I'm not very experimented with the whole s5 modding thing, but is there really no way to have root on cid11 mm ?
DRAKUL666 said:
I'm not very experimented with the whole s5 modding thing, but is there really no way to have root on cid11 mm ?
Click to expand...
Click to collapse
There really is no way to have root on Android Marshmallow 6.0 with Emmc_CID_11 but you have safestrap so you can install xposed or most mod zips , delete system files you dont want etc
Hi I flash the rom ... Now my phone is very slow and freezes ... any help plz .
sjla said:
Hi I flash the rom ... Now my phone is very slow and freezes ... any help plz .
Click to expand...
Click to collapse
What ROM?
Sent from my kltevzw using XDA Labs
swiftbones74 said:
What ROM?
Sent from my kltevzw using XDA Labs
Click to expand...
Click to collapse
[ROM][VZW_Stock _QL1_Deodexed][DEV aboot Magisk Rooted][Locked Bootloader Safstrap] by jrkruse ..... these rom
sjla said:
[ROM][VZW_Stock _QL1_Deodexed][DEV aboot Magisk Rooted][Locked Bootloader Safstrap] by jrkruse ..... these rom
Click to expand...
Click to collapse
In that case you most likely need to do a full wipe, as well as formatting data,( the option were you have to type yes), in TWRP. The ROM works flawlessly on my phone. Good luck and insure that you have backed all your data first because this Will erase all data on internal storage.
Sent from my kltevzw using XDA Labs
it's possible to install Flyme OS 6 with CID 11?
Epiel said:
it's possible to install Flyme OS 6 with CID 11?
Click to expand...
Click to collapse
No because flume OS like all custom (roms, or most) require an unlocked bootloader. CID11 g900v can't be bootloader unlocked.
Sent from my kltevzw using XDA Labs
swiftbones74 said:
No because flume OS like all custom (roms, or most) require an unlocked bootloader. CID11 g900v can't be bootloader unlocked.
Sent from my kltevzw using XDA Labs
Click to expand...
Click to collapse
So sad to know it, thanks for helping me!
Oh man... I may have to knock my rust off and give this a go... Last chance to get up to a more recent security patch for my poor CID 11
( G900V+ CID 15 ) I want to install LineageOS after rooting, at which step i should flash the rom file and gapps file.. instead of the EMMC_15_VZW_QL1_MAGISK_ROOTED.zip... I just want to be sure
voldemort007 said:
( G900V+ CID 15 ) I want to install LineageOS after rooting, at which step i should flash the rom file and gapps file.. instead of the EMMC_15_VZW_QL1_MAGISK_ROOTED.zip... I just want to be sure
Click to expand...
Click to collapse
Just make sure that you have everything good and backed up. Do a full wipe in twrp / you may need to update twrp (klte version works for klrevzw now, as do klte aosp roms) flash rom gapps and root if you want it. / Reboot/ enjoy.
Sent from my PH-1 using XDA Labs
Anyone have any luck running Blackberry work with this magisk rom? I have apps hidden using magisk hide, Google play shows it is certified, but Blackberry work fails enrollment. On stock, it works fine. This is on a CID 15 phone.
Apparently Blackberry Work does more checks than google safety net and can detect modification. If anyone has any ideas how I can make Blackberry work think my phone is not modified, please let me know.
I've tried core only mode, hiding the app. What else can I try?
towel root
:trying to run towel root massage this phone isn't currently supported
Is compatible with xposed ?
The instructions worked like a charm on my EMMC 11. Props to the Op !
One question....looking to install AOKP or LineageOS which needs latest TWRP to install. How do I upgrade TWRP in Safestrap on the EMMC 11? I only see the new version for EMMC 15.
Thanks