Database Info

[Recovery] EVA NoCheck Recovery - Flash unapproved OTA firmwares!

Overview
This is a patched recovery image which bypasses the usual checks performed during a firmware flash, allowing you to flash unapproved OTA firmwares. For example, the latest FullOTA-MF b394:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can also downgrade without using the b300 rollback package (untested)
Prerequisites
Unlocked bootloader
Rooted
Backup your data (flashing may cause bootloader to re-lock or restore factory default etc. - don't blame me if it goes wrong!)
Instructions
Download firmware:
Use Huawei Firmware Finder (Play Store link) to download the latest firmware files - you will need all 3 zip files:
- update.zip
- update_data_full_public.zip
- update_full_EVA-L09_hw_eu.zip
Tips: check for the latest number (102064 for b394) and ensure you have the larger filesize (around 2GB). For example, these are the latest at time of writing b394:
Flash nocheck recovery:
Reboot device to fastboot mode (power off fully, hold down volume button and connect USB cable)
Run the following to flash recovery:
Code:
fastboot flash recovery eva_l09b391_nocheckrecovery.img
fastboot reboot
Send commands via ADB
Phone should be booted back to system - connect phone via adb and allow root prompt:
Code:
adb shell
su
Create HWOTA folder:
Code:
mkdir /data/update/HWOTA
Copy firmware to HWOTA folder (replace 102064 below with correct value - this is for b394):
Code:
cp /sdcard/HWFF/102064/update* /data/update/HWOTA/
Paste recovery command:
Code:
echo "--update_package=/data/update/HWOTA/update.zip" > /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_data_full_public.zip" >> /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_full_EVA-L09_hw_eu.zip" >> /cache/recovery/command
exit
Finally reboot to recovery to start firmware upgrade:
Code:
adb reboot recovery
Firmware should install and reboot automatically
Extras
You can probably Re-Brand to alternative customers too i.e. c636 (Asian region) to c432 (European region). Follow the tutorial here: https://forum.xda-developers.com/honor-8-pro/how-to/oeminfo-c432-t3625886 - you'll need the correct OEMINFO files, this is untested.
Thanks
- Olddroid
- Mankindtw
- Hackslash
- DkiOnline (L09 tester)
- jimz6 (L19 tester)
- LastStandingDroid
XDA:DevDB Information
EVA NoCheck Recovery, Tool/Utility for the Huawei P9
Contributors
Atarii
Version Information
Status: Stable
Created 2017-11-14
Last Updated 2017-11-17

Changelog
31-01-2018
Added L29 recovery image
17-11-2017
Added L19 recovery image
14-11-2017
Initial release

THX, i try and successfully, i am on latest firmware now

rafitcu said:
THX, i try and successfully, i am on latest firmware now
Click to expand...
Click to collapse
Great - thanks for the feedback

Update: I've added the L19 recovery image after successful feedback

updated succesfully.
only two points, on prerequisites I think you should add that the phone should be rooted cause after I flashed the nochechrecovery I needed to reflash twrp and root.
and the second point is that there is missing a / before de * in the step when you copy the 3 zips to data.
nice to know there is a method to bypass the verification on firmwares :good::good:

Can any one try downgrade after update to b394 using b300???

Can one modify the recovery.img file for a certain firmware version other than B391?

kukubau said:
Can one modify the recovery.img file for a certain firmware version other than B391?
Click to expand...
Click to collapse
You haven't read OP #1?

Tecalote said:
You haven't read OP #1?
Click to expand...
Click to collapse
You didn't understand my question.
Can one modify the recovery.img from another firmware package, other than B391?
Let's say I'd like to do a HEX file diff between two image files and modify the img file myself.
Is this possible? What should I look for?
For learning purposes.

kukubau said:
You didn't understand my question.
Can one modify the recovery.img from another firmware package, other than B391.
Let's say I'd like to do a HEX file diff between two image files and modify the img file myself.
Is this possible? What should I look for?
For learning purposes.
Click to expand...
Click to collapse
You can use this recovery with any firmware and ignore the version - I just used b391 as the base as that's the firmware I was on at the time.
You can't modify other recovery images by diffing the hex - you need to disassemble the recovery binary and overwrite the checks with arm assembly

@Atarii
Do you try downgrade using b300 update.app and then to b136 or b182???
Your method it's safe?? What when we brick device

Atarii said:
You can use this recovery with any firmware and ignore the version - I just used b391 as the base as that's the firmware I was on at the time.
You can't modify other recovery images by diffing the hex - you need to disassemble the recovery binary and overwrite the checks with arm assembly
Click to expand...
Click to collapse
Thanks for the clarification.
I've flashed the L19 B391 recovery image and flashed the B391 OTA using your method, but the phone didn't boot afterwards.
I'll try the B390 OTA later today, to see if it makes a difference.

kukubau said:
Thanks for the clarification.
I've flashed the L19 B391 recovery image and flashed the B391 OTA using your method, but the phone didn't boot afterwards.
I'll try the B390 OTA later today, to see if it makes a difference.
Click to expand...
Click to collapse
if not, boot up and hold vol+ like you would enter to twrp, then it should flash automatically.

kukubau said:
Thanks for the clarification.
I've flashed the L19 B391 recovery image and flashed the B391 OTA using your method, but the phone didn't boot afterwards.
I'll try the B390 OTA later today, to see if it makes a difference.
Click to expand...
Click to collapse
Did you use the 2GB file?

Atarii said:
Did you use the 2GB file?
Click to expand...
Click to collapse
Yes.
---------- Post added at 02:55 PM ---------- Previous post was at 02:53 PM ----------
dkionline said:
if not, boot up and hold vol+ like you would enter to twrp, then it should flash automatically.
Click to expand...
Click to collapse
I've flashed my phone and unbricked it hundreds of times.
I've even posted an unbrick guide here on XDA forums.
I guess I know how to force flash it using the three key combo.

chudy_85 said:
@Atarii
Do you try downgrade using b300 update.app and then to b136 or b182???
Your method it's safe?? What when we brick device
Click to expand...
Click to collapse
I haven't personally tested this but I know others have for other device - so use at your own risk

kukubau said:
Yes.
---------- Post added at 02:55 PM ---------- Previous post was at 02:53 PM ----------
I've flashed my phone and unbricked it hundreds of times.
I've even posted an unbrick guide here on XDA forums.
I guess I know how to force flash it using the three key combo.
Click to expand...
Click to collapse
Im not using 3 key, only 1.
If not boot, you have manually boot with key i posted before.

This is so nice. Is it possible to make one for PO Plus, VIE-L09 and VIE-L29? Thanks

dkionline said:
Im not using 3 key, only 1.
If not boot, you have manually boot with key i posted before.
Click to expand...
Click to collapse
Doesn't boot into android os, no matter what.
I'll post a follow up after I try the B390 fw, maybe incremental updates are required.

[STF-L09C432] How to install Oreo on your H9

So when it comes to the newly released EMUI8 for Honor 9 things get a little bit tricky, as we don't have any official update for our region yet (only for C900 and AL variants - chinese).
Every file i provided have been built during the way finding how stuff works on oreo - and alot of stuff changed EDIT: Official update is out for C432 - i recommend to not use the provided TWRP for daily, reliable usage.
PART 1
0. download the B360a zip from my mega folder
1. read README.txt from fw zip and follow the steps carefully (easy install)
2. have fun with official oreo
Rollback instructions
1. copy the rollback zip and nocheck recovery (!!oreo version!!) to the root of your MicroSD card
2. enable usb debugging in developer options
3. connect your phone to your computer, start an adb shell and issue the following commands:
Code:
dd if=/storage/sdcard1/STF_RECOVERY_OREO_NoCheck.img of=/dev/block/bootdevice/by-name/recovery_ramdisk
dd if=/storage/sdcard1/STF_RECOVERY_OREO_NoCheck.img of=/dev/block/bootdevice/by-name/erecovery_ramdisk
echo --update_package=/sdcard/update_rollback_al10c00b190.zip > /cache/recovery/command
4. last but not least reboot recovery, again in adb shell:
Code:
reboot recovery
5. your device should start to flash a chinese version of nougat (EMUI 5.1)
hint: if you get an error during the installation, just press the reboot button, it still boots.
device crashes during boot? do a low-level data partition format, boot into erecovery when you get asked to.
6. prepare the MicroSD (8gb atleast, exFAT formatted)
download the C432 firmware and extract it
copy the dload folder you extracted to the root of your MicroSD
7. if required unlock your bootloader
8. flash the nocheck recovery (nougat version) to recovery and recovery2 partition using fastboot
Code:
fastboot flash recovery STF_RECOVERY_NoCheck.img
fastboot flash recovery2 STF_RECOVERY_NoCheck.img
9. boot your device into force dload mode (keep vol+, vol- and power pressed until the installation starts)
10. you should boot into a fresh L09C432B100 installation
I've uploaded every file you need for the process to mega.nz - please do not mirror any of the stuff provided!
[url]https://mega.nz/#F!W1QUAIbZ!7Gbf79dC6NwD1e_zdY_O3Q[/URL]
Huge thanks to @LastStandingDroid for providing the modified SuperSU installation package.
Best Regards,
OldDroid

To fix the file manager, open your root file explorer and follow the steps carefully:
1. create a folder called "normal" in /cust/hw
2. create a second folder in the previously created one, name it "app"
3. now move HwCloudDrive_Local folder from /cust/hw/eu/app to /cust/hw/normal/app
4. reboot

Thank you!
I'll try it!

Does bootloader uncloked ?

After I done the factory reset my themes lost again, and the boot animation too...and the apps....
I mean, I done everithing what you said and the themes come back...but after i relocked the bootloader its gone....like if i didn't do anithing :S (sorry for my bad English)
Should i try again?

BobekMark said:
After I done the factory reset my themes lost again, and the boot animation too...and the apps....
I mean, I done everithing what you said and the themes come back...but after i relocked the bootloader its gone....like if i didn't do anithing :S (sorry for my bad English)
Should i try again?
Click to expand...
Click to collapse
don't relock the bootloader after the whole process

OldDroid said:
don't relock the bootloader after the whole process
Click to expand...
Click to collapse
Ohh.... i see...ty
i will try it again
---------- Post added at 06:14 PM ---------- Previous post was at 05:19 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my result. :\
It's okay, or there should be some other apps? Or should it be C432 instead of C900 ? :S
(There is no Huawei Account option :S )

BobekMark said:
Ohh.... i see...ty
i will try it again
---------- Post added at 06:14 PM ---------- Previous post was at 05:19 PM ----------
This is my result. :\
It's okay, or there should be some other apps?
(There is no Huawei Account option :S )
Click to expand...
Click to collapse
which h9 version do you have, C432?

OldDroid said:
which h9 version do you have, C432?
Click to expand...
Click to collapse
Yes (I updated the pictures)

BobekMark said:
Yes (I updated the pictures)
Click to expand...
Click to collapse
thats normal, your phone is still running c432, this is just a ui thing, if it disturbs you i can post the path where the version is beeing set

OldDroid said:
thats normal, your phone is still running c432, this is just a ui thing, if it disturbs you i can post the path where the version is beeing set
Click to expand...
Click to collapse
And the apps are ok?
When i was in the root explorer i still see applications like File Manager and Huawei apps :S

BobekMark said:
And the apps are ok?
When i was in the root explorer i still see applications like File Manager and Huawei apps :S
Click to expand...
Click to collapse
where did you find them?

I have problem with installation.
I have NTFS system files on my SD card and i can't mount this card in TWRP.
What i have to do?
Format to FAT32 or what?

So awesome, thank you for that.

Is there a version of this that will work the same or similar on the P10 (standard P10). Thanks

OldDroid said:
where did you find them?
Click to expand...
Click to collapse
There

BobekMark said:
There
Click to expand...
Click to collapse
Install em as normal apk it'll be visible.
I don't like your settings it looks so color less
[emoji6]
Sent from my DUK-L09 using Tapatalk

LastStandingDroid said:
Install em as normal apk it'll be visible.
I don't like your settings it looks so color less
[emoji6]View attachment 4337715View attachment 4337718View attachment 4337719
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
Ok...but i don't have Huawei "Support" or account or idk what.....but for example...the themes app is different, because i can't log in any Huawei Account ...it's not an option to log in :\

Hi! And first of all, thanks a lot for this guide as you just gave hopeless H9 owners a bit of light...
Now I haven't gone through the process yet but I got a bit confused as of part.3 (that is recommended but not needed), should we unroot BEFORE flashing Ramdisk and Recovery Ramdisk? I then have an old UnSu script by Osmosis, would it work or the "Full Unroot" option from the SuperSu app is okay?
Thanks in advance for your reply and Thanks again for this guide!! Cheers

BobekMark said:
Ok...but i don't have Huawei "Support" or account or idk what.....but for example...the themes app is different, because i can't log in any Huawei Account ...it's not an option to log in :\
Click to expand...
Click to collapse
Install huawei services from play store but it won't help ;P
Because online themes is disabled by default
Sent from my DUK-L09 using Tapatalk

Le Pro3 AI X650 EUI5.9_25S install ROM via Fastboot

leecopro3 ai.zip
1.82 GB
1.) install the adb fastboot on the pc
2.) activate the debug usb
3.) unzip the leecopro3 ai.zip in a directory
4.) start the phone in fastboot mode (with the phone off, press volume down and then the power button)
5.) connect to the pc and then click on the file "x7_fastboot_tool.bat" and wait for the process to finish. (it may take 10 minutes to start/finish.)
If the file or folder error is not found, copy the all unziped rom files in the ADB folder, where is the fastboot located.
and then click on the file "x7_fastboot_tool.bat" and wait for the process to finish.(it may take 10 minutes to start/finish.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With this method your phone will be changed to the x650
original link
Thanks (kurgy) for this idea

Reserved

@laikexpert
At the first start shows (leeco account) that the device is already (and does not authorize and skip). reset does not help

krickray said:
@laikexpert
At the first start shows (leeco account) that the device is already (and does not authorize and skip). reset does not help
Click to expand...
Click to collapse
You must activate developer options, oem unlock and usb depuration, when you start in fastboot mode you must unlock the bootloader and then flash the rom.

x650
Hi!Can you make firmware on LeEco Le Pro 3 AI x650 for spflashtool?

You can use this one in sp flashtool,

Please...i need the phone in spanish, i have a backup of multilingual rom 28s but i can't keep the imei i have done everythinkg nothing works...the only rom usable is de 28s fastboot without multilingual

julianhrojas said:
Please...i need the phone in spanish, i have a backup of multilingual rom 28s but i can't keep the imei i have done everythinkg nothing works...the only rom usable is de 28s fastboot without multilingual
Click to expand...
Click to collapse
Restore nvram with flashtool:
https://romprovider.com/2017/06/backup-nvram-mediatek-mt67xx/

LePro3 AI aka x650+x651+x653+x657
Multilingual Rom without bugs Remote control and Gallery with intact NVRAM.
Obtained from the 4PDA & XDA-Developer resources I thank.
It is a first effort that will serve to help those who try to change their mobile phone with the brikkato phone.
To be installed with Fastboot after unlocking the bootloader with the following commands:
adb devices
fastboot oem unlock-go
fastboot oem device info
then click on the folder that you have downloaded from the following link and unzipped:
x7_fastboot_tool.bat if you have Win
x7_fastboot_tool.sh if you have Linux
It is not rooted, we are waiting for a TWRP compatible
qui su:
//mega.nz/#!cXICGQID!YKynPskSmAVw1CZlMBIaXKo2L4jGUEzPJ8DlnJcPmW4

LEX650 root and twrp
Is it really possible to root the lex650 variant? Do we have a compatible twrp as of now?

DRAGO.NET said:
Multilingual Rom without bugs Remote control and Gallery with intact NVRAM.
Obtained from the 4PDA & XDA-Developer resources I thank.
It is a first effort that will serve to help those who try to change their mobile phone with the brikkato phone.
To be installed with Fastboot after unlocking the bootloader with the following commands:
adb devices
fastboot oem unlock-go
fastboot oem device info
then click on the folder that you have downloaded from the following link and unzipped:
x7_fastboot_tool.bat if you have Win
x7_fastboot_tool.sh if you have Linux
It is not rooted, we are waiting for a TWRP compatible
qui su:
//mega.nz/#!cXICGQID!YKynPskSmAVw1CZlMBIaXKo2L4jGUEzPJ8DlnJcPmW4
Click to expand...
Click to collapse
can you give me the details sir on how to root and install twrp for the LeEco Le Pro 3 AI x60 (Helio x27 variant) ? It would be a big help for us here in the philipines. Thank sir and have a nice day.

Medabots said:
can you give me the details sir on how to root and install twrp for the LeEco Le Pro 3 AI x60 (Helio x27 variant) ? It would be a big help for us here in the philipines. Thank sir and have a nice day.
Click to expand...
Click to collapse
It is not rooted, we are waiting for a TWRP compatible

By now you can't root this device without the probability of lose the imei.
With kingroot 5.3.3 you can get a temporal root until restart without danger, with this and for example "root uninstaller" or "titanium backup" you have time to freeze or deinstall the chinesse apps and use "l speed" for tweak it.

Toni Moon said:
With kingroot 5.3.3 you can get a temporal root until restart without danger,
Click to expand...
Click to collapse
You want to tell that we can root with KR, but it's not safe to reboot after that?
Sorry..I did not understand what you tried to tell us..

Do you think you can enable NFC?
Excellent work, thanks DRAGO.NET

My phone x651 has black screen not working and I can't enter to fastboot
Can anyone help me please

3llawi said:
My phone x651 has black screen not working and I can't enter to fastboot
Can anyone help me please
Click to expand...
Click to collapse
The only method that can work with a bricked mtk phone is flashing the phone with flashtool.

Toni Moon said:
The only method that can work with a bricked mtk phone is flashing the phone with flashtool.
Click to expand...
Click to collapse
Thank you for your response
I want ROM to flash through sp flashtool
All ROM I founded is fastboot
Please help me

try a fastboot rom with scatter.txt inside

Toni Moon said:
You can use this one in sp flashtool,
Click to expand...
Click to collapse
Please help me i want to flash via SP flashtool
I download the rom but don't know how to flash this via sp flash tool ..because my phone is dead black screen can't enter to fastboot
---------- Post added at 01:36 PM ---------- Previous post was at 01:26 PM ----------
Toni Moon said:
try a fastboot rom with scatter.txt inside
Click to expand...
Click to collapse
Are you prefer this rom?

[GUIDE] How to Downgrade / Unbrick /Flash Stock Firmware Nokia 5.1 Plus.

This guide is for downgrading /Unbrick /Flash Stock Firmware Nokia 5.1 plus to Android Pie or Oreo.
This is STRICTLY for Global Nokia 5.1 plus variant NOT for Chinese variant Nokia X5. If you want to downgrade Chinese variant then follow this guide by hikari_calyx
Guide For Chinese Variant (X5).
What you need ::
1.MTK- Smart Phone Flashing tool which can be downloaded here. (v5.1804) Download
2.Android platform tools and ADB and fastboot drivers . Download
3. MTK Port drivers , For windows only. Download
4.FIRMWARE -
Oreo - PDA-1100-0-00WW-B01_unpacked.7z from . Download
Pie - PDA-214A-0-00WW-B01.full.zip from here . Download
STEP 1 : Backup your important files from internal storage and remove all google accounts from your phone to prevent FRP lock.
STEP 2 : Install all drivers and files mentioned above and extract your desired Firmware .
STEP 3 : Create a full backup using SP Flash tool (must do).
Open Smart Phone Flash Tool, choose the Download Agent file and Scatter File from the unpacked firmware.
DO NOT USE DOWNLOAD AGENT FROM THE FLASH TOOL ITSELF, USE ONLY THE ONE PROVIDED IN THE FIRMWARE.
Should look like this-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TROUBLESHOOTING.
If you get this error
Then go to options and disable "Check LIB DA Match".
Click to expand...
Click to collapse
Then move to "Readback" and tap on add and choose you location where you want save you backup after that you double click on the created readback section and you will see this :
Use any text editor to open the scatter file from extracted firmware , and find "userdata". You'll need the start address of userdata as the length of the full backup.
And change the length from the address you found under "userdata" in scatter file like this and tap ok.
Click on "Readback" and the connect you phone in flashing mode with both volume button pressed and release upon the readback process starts ( you can see it in the lower progress bar).
STEP 4 : Upon completion of the readback process , close SP Flash tool and unplug you phone and trigger it to fastboot mode and change your Active partition to "a" by this command.
Open cmd to use this command.
Code:
fastboot --set-active=a
After this process completes , power off you phone .
STEP 5 : Flashing your firmware.
Open SP Flash Tool and check that DA and Scatter is loaded from your extracted Firmware.
Choose "DOWNLOAD ONLY" mode , not any other or you will loose important partitions.
Then click on download and connect your phone in flashing mode by both volume button pressed and release upon the download process starts ( you can see it in the lower progress bar).
After its finished, it will show "Download OK" popup.
Now just close SP Flash tool , unplug you phone and reboot.
Enjoy your downgraded/ Unbricked Nokia 5.1+.
Special thanks to :
hikari_calyx for Firmware and solving all the errors.
Someone , Someone and Someone for testing this guide.
Hit Thanks if it worked for you.

Tested, guide works perfectly. Also, the given Android version in this guide is 9 (February SP) for those who want to know.

For some reason, the wifi doesn’t work for me, it just falls off and connects again (how to fix it?

Pelmewek said:
For some reason, the wifi doesn’t work for me, it just falls off and connects again (how to fix it?
Click to expand...
Click to collapse
Check your imei and baseband...is it there???

Readback not processing
Cant compltete the readback prccess what should i do?

xdriv3r said:
Cant compltete the readback prccess what should i do?
Click to expand...
Click to collapse
Which version of SP flash tool are you using ??

bx2_nero said:
Which version of SP flash tool are you using ??
Click to expand...
Click to collapse
I used the latest version. I'm going to try again with the recommended version. Thank you .

xdriv3r said:
I used the latest version. I'm going to try again with the recommended version. Thank you .
Click to expand...
Click to collapse
Use Sp flash tool version 5.1804 or 5.1824.
Read the instructions carefully ..

How to backup using sp flashtool?
How to backup using sp flashtool?
bx2_nero said:
Use Sp flash tool version 5.1804 or 5.1824.
Read the instructions carefully ..
Click to expand...
Click to collapse

xdriv3r said:
How to backup using sp flashtool?
Click to expand...
Click to collapse
You must backup your personal data and remove Google account before starting.
The readback process is the backup process in SP flash tool.

Android 10 firmware not available
bx2_nero said:
Pie-PDA-214A-0-00WW-B01.full.zip from here https://androidfilehost.com/?fid=1899786940962585502 (recommended if you are downgrading to root and install Androdi 10).
Click to expand...
Click to collapse
Alas, no mirror found:

mll2 said:
Alas, no mirror found:
Click to expand...
Click to collapse
https://tpedutw-my.sharepoint.com/:...dFks--5G6V4vYBGTwLw1BsthbtIuJqMUN3tQ?e=wOfytH
Try from here
Make sure you download the file mentioned.
PDA_214A_0_00WW_B01_full

bx2_nero said:
https://tpedutw-my.sharepoint.com/:...dFks--5G6V4vYBGTwLw1BsthbtIuJqMUN3tQ?e=wOfytH
Try from here
Make sure you download the file mentioned.
PDA_214A_0_00WW_B01_full
Click to expand...
Click to collapse
Thank you!

I tried downgrading from Android 10 Internal Beta and cannot skip the update screen on reboot. How to fix this?

xdriv3r said:
I tried downgrading from Android 10 Internal Beta and cannot skip the update screen on reboot. How to fix this?
Click to expand...
Click to collapse
Did you follow step 1 - remove Google account to prevent FRP Lock.
Try hard resetting, reset from recovery.

bx2_nero said:
Did you follow step 1 - remove Google account to prevent FRP Lock.
Try hard resetting, reset from recovery.
Click to expand...
Click to collapse
It's just one compulsary update. Around September 2019 sp. I'm good now. I thought I had hardbricked the device when I changed primary partition to b and got stuck in bootloop unable to go into recovery. Then I used volume down + power and usb to directly get into fastboot.

xdriv3r said:
It's just one compulsary update. Around September 2019 sp. I'm good now. I thought I had hardbricked the device when I changed primary partition to b and got stuck in bootloop unable to go into recovery. Then I used volume down + power and usb to directly get into fastboot.
Click to expand...
Click to collapse
Why did you changed your primary partition to B.

bx2_nero said:
Why did you changed your primary partition to B.
Click to expand...
Click to collapse
I'm noob.

xdriv3r said:
I'm noob.
Click to expand...
Click to collapse
Your phone is fine right now?

bx2_nero said:
Your phone is fine right now?
Click to expand...
Click to collapse
Yeah now on feb sp with mtksu and suboot.

Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff

-----------------------------------------------------------------------
Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on each approximataley 15-20 seconds.
----------------
Must have tools:
----------------
1.libusb-win & mtk-bypass:
12.52 MB file on MEGA
mega.nz
2.spflash tool (v5 or the latest on no problem)
SP Flash Tool v5.1924 - Download SmartPhone Flash Tool
SP flash tool download - SP Flash Tool v5.1924 is the latest version that can flash Stock ROM, Custom recovery for your MTK based android phone. SPFLASH tool comes as free-ware.
spflashtool.com
3.mediatek driver:
MediaTek_USB_Drivers.exe | by Droidwin for Misc. Software & Hardware Resources
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
4.Install MediaTek USB VCOM Drivers (If required)
5.stock firmware redmi 6A:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
or
Download Redmi 6A (cactus) V11.0.9.0.PCBMIXM MIUI 11 Stable Full Rom | XiaomiROM.com
The Stable update V11.0.9.0.PCBMIXM has been officially released for Redmi 6A (codename is cactus). Before updating, please make sure you have …
xiaomirom.com
download and extract, from tgz file u will produce another comppressed file, just extract it once again.
6.auth file
Sp flashtool authentication file!
HIT THE THANKS BUTTON Newer MTK (mediatek) devices usually request for an AUTHENTICATION CERTIFICATE TO FLASH.. here am sharing the file i have.. i have used it on two different phones.. makes me think it can work even on most devices out there...
forum.xda-developers.com
------------------
How to:
------------------
zero step:
----------
dissembler the back case of your phone. Disconnect the battery connector from motherboard. (if you have any difficulty to open the back case, just see it in youtube)
1st step:
-----------
open up spflash tool as Administrator and prepare it beforehand (later on in third step you must quickly switch the app in order to flash the device successfully).
Make sure to fill out the three inputs in download section tab:
-DA (download agent) if it already filled, then just leave it. if not, you must refer it to DA agent files inside your spflash tool folder. You could download seprately DA file from internet.
-fill up scatter file from stock firmware Rom.
Important ! Dont move or change the scatter file position in firmware folder! It must be inside the firmware folder!
-auth file ( point it out to the auth file)
-now just leave this app open, head onto 2nd step below!
2nd step:
------------
run: libusb win32.exe:
Tick on Install a Device Filter and Tap Next
-install libusb
-select install a device filter
-Press Volume Up (or down in another model)
-Insert the USB cable
-Now you can see the device’s COM Port in the LibUSB window, Click Install.
Click OK (tips: quickly click the device when it appeared!).
if u failed, just repeat the 2nd step again!
3rd step:
---------
-Run MTKbypassv4.exe
-Press Volume Up (other device use vol down thoug)
-Insert the USB cable into pc
-press bypass button in app
-make sure all ok/done (green color text)
-now quickly go to spflash app, click download button
eventually spflash will execute flashing the device, wait till it finish (download ok!)!
now try to connect the battery connector and boot it up
Voila, your hardbrick phone has come to life once again!
IMPORTANT!:
here in 3rd step, you would have BROM error (This error clearly means that the Flash Tool has issues finding the COM port on which your device is connected.) if u didnt quick enough to switch to spflash app and click downlod button. If this happen, just resume the 3rd step.

Hi please password to file mtkbypass... Thanks Man

esemokay said:
Hi please password to file mtkbypass... Thanks Man
Click to expand...
Click to collapse
use this:

Tajil said:
use this:
Click to expand...
Click to collapse
use this:

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have done these steps but it's showing error after flashing in SP flashtool. Please find a solution..

Hariz_mhd said:
View attachment 5878861View attachment 5878863I have done these steps but it's showing error after flashing in SP flashtool. Please find a solution..
Click to expand...
Click to collapse
that error have several indications,
one of them is your emmc nearly damage or have been damage. So, u must change u r emmc.
Try this first:
in your spflash, go to option, in tab general uncheck "storage life cycle check"

After flashing, I'm stuck at mi boot logo. Anyone encounter before?

Pinage said:
After flashing, I'm stuck at mi boot logo. Anyone encounter before?
Click to expand...
Click to collapse
have u tried this version ?
cactus_global_images_V11.0.9.0.PCBMIXM_20200916.0000.00_9.0_global_c0a9fb7059

Pinage said:
After flashing, I'm stuck at mi boot logo. Anyone encounter before?
Click to expand...
Click to collapse
have u tried this version ?
cactus_global_images_V11.0.9.0.PCBMIXM_20200916.0000.00_9.0_global_c0a9fb7059

is this will work on redmi note 7?