LG P690F Unlocked.
1. The settings short cut is not working. So the Settings is not accessible.
2. Unable to change to USB Debug mode as can not access Settings.
3. No internet connection, Unable to connect to Wifi.
4. Unable install /remove any app.
I have tried to do the firmware update/recovery with LG PC Suit IV but its says already latest software so need to update.
Is there any way to recover to factory default settings? Or Upgrade Android?
I am completely lost here. Please HELP me!! Thanks in Advance
What kind of lock?
melahi said:
LG P690F Unlocked.
1. The settings short cut is not working. So the Settings is not accessible.
2. Unable to change to USB Debug mode as can not access Settings.
3. No internet connection, Unable to connect to Wifi.
4. Unable install /remove any app.
I have tried to do the firmware update/recovery with LG PC Suit IV but its says already latest software so need to update.
Is there any way to recover to factory default settings? Or Upgrade Android?
I am completely lost here. Please HELP me!! Thanks in Advance
Click to expand...
Click to collapse
How did you lock it? There are a number of different locks, some of which your service provider will unlock. I have puk locked my phone before, a simple call to my provider fixed the issue.
When i am turning hotspot on my mobile . the other device is connecting to my phone but is unable to use the internet via my phone. I tried the following
1. Reset the phone
2. Tried to use hotspot using setting as open network
3. Tried to reset and reinstall mobile data network setting
4. I tried on other devices as well still the same issue.
Initially other users were able to use net from my mobile hotspot .but npw they can connect successfully but not unable to use my cell net. Please advice the solution.:crying:
ask here in this
earthworm82 said:
When i am turning hotspot on my mobile . the other device is connecting to my phone but is unable to use the internet via my phone. I tried the following
1. Reset the phone
2. Tried to use hotspot using setting as open network
3. Tried to reset and reinstall mobile data network setting
4. I tried on other devices as well still the same issue.
Initially other users were able to use net from my mobile hotspot .but npw they can connect successfully but not unable to use my cell net. Please advice the solution.:crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/droid-razr-m/development
ask in this thread ....or its general...
sachoosaini said:
http://forum.xda-developers.com/droid-razr-m/development
ask in this thread ....or its general...
Click to expand...
Click to collapse
admin can you please move this thread to specified segment
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- Latest Official: http://forum.cubot.net/viewforum.php?f=21
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
None yet.
Flash Tool
- Latest SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.2.1 by @jemmini : https://mega.nz/#F!YRUVHRAY!5pMO_8cEYqhshT6ZMbNo5w
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
- Magisk (still via TWRP): https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
TYVM
Thank u very much worked well
wfw cloudwp
Don't dedect my phone.
Hello, I have all driver for cubot x18 installed but sp flash tool doesn't detect my phone(I removed battery). Can someone to help me? I want just to root my phone. P.S : I use Windows 7.
Maybe it helps you
UnderZeroRO said:
Hello, I have all driver for cubot x18 installed but sp flash tool doesn't detect my phone(I removed battery). Can someone to help me? I want just to root my phone. P.S : I use Windows 7.
Click to expand...
Click to collapse
Hi, I'm using win 7/32 and I did not need usb drivers. We restarted the windows, in F8 I turned off checking the drivers' signatures and then started the windows. On the phone I enabled the developer options and the usb troubleshooter. Then I plugged the usb cable (on) to the computer. It will start downloading and installing the drivers. You have to run all the options for connecting the phone to the computer (usb configuration), from simple loading to MTP, PTP and MIDI. When all the drivers have been installed, restart the computer and turn off the phone. At me, (Cubot x 18), I have not removed any battery, neither sims nor microsd. Just with the phone off. When you restart your computer, start the sp flash tool, choose MT6737T_Android_scatter for what you need, choose the option and activate it, and finally plug the phone off to your computer. From now on, everything has to go ... That's the method I use. I was frankly amazed that she was running without a battery in the phone; and all the way to him, just stopped.
@dn said:
Hi, I'm using win 7/32 and I did not need usb drivers. We restarted the windows, in F8 I turned off checking the drivers' signatures and then started the windows. On the phone I enabled the developer options and the usb troubleshooter. Then I plugged the usb cable (on) to the computer. It will start downloading and installing the drivers. You have to run all the options for connecting the phone to the computer (usb configuration), from simple loading to MTP, PTP and MIDI. When all the drivers have been installed, restart the computer and turn off the phone. At me, (Cubot x 18), I have not removed any battery, neither sims nor microsd. Just with the phone off. When you restart your computer, start the sp flash tool, choose MT6737T_Android_scatter for what you need, choose the option and activate it, and finally plug the phone off to your computer. From now on, everything has to go ... That's the method I use. I was frankly amazed that she was running without a battery in the phone; and all the way to him, just stopped.
Click to expand...
Click to collapse
Hey, its work! Thanks so much.
UnderZeroRO said:
Hey, its work! Thanks so much.
Click to expand...
Click to collapse
:good: be happy !
I wish we had an Oreo ROM for this device. It would fly.
JTayta said:
I wish we had an Oreo ROM for this device. It would fly.
Click to expand...
Click to collapse
Would be cool
Hi just got my phone and the mobile data is disconnected. I cannot turn it on and when I try to go into phone settings and try and change the radio band it crashes the application. The option to enable mobile data is there but has no effect. Anyone know of a fix or maybe how to download a new modem? Tyia
Maybe this ...
3vo3d said:
Hi just got my phone and the mobile data is disconnected. I cannot turn it on and when I try to go into phone settings and try and change the radio band it crashes the application. The option to enable mobile data is there but has no effect. Anyone know of a fix or maybe how to download a new modem? Tyia
Click to expand...
Click to collapse
Hello, I think you need to set a new APN. To do this, you must go into Settings-Wireless & networks-More-Cellular networks-Access Point Names. At the top of the bar you will have to press "+" and you will need to configure the new APN according to the mobile phone operator from which you have the SIM card you are using. Once configured, you'll need to save and check it as an asset, the one that your phone will use. That's all. And there would be something else. At my side, I can not catch 4G, it gives me connection error. So I set it on 3G, from -preferred network type. Hope to help.
@dn said:
Hello, I think you need to set a new APN. To do this, you must go into Settings-Wireless & networks-More-Cellular networks-Access Point Names. At the top of the bar you will have to press "+" and you will need to configure the new APN according to the mobile phone operator from which you have the SIM card you are using. Once configured, you'll need to save and check it as an asset, the one that your phone will use. That's all. And there would be something else. At my side, I can not catch 4G, it gives me connection error. So I set it on 3G, from -preferred network type. Hope to help.
Click to expand...
Click to collapse
Thanks mate. The correct apn had been set and it shows 4g connection at the top but simply refuses to connect to mobile data. It all says its switched on etc. When I type +*+*4636*+*+ into dialer screen to bring up phone settings it is there that it says mobile data disconnected and it simply will not switch on.
I've also factory reset the phone and it won't connect to mobile data then either. When I try to change the radio band it crashes.
3vo3d said:
Thanks mate. The correct apn had been set and it shows 4g connection at the top but simply refuses to connect to mobile data. It all says its switched on etc. When I type +*+*4636*+*+ into dialer screen to bring up phone settings it is there that it says mobile data disconnected and it simply will not switch on.
I've also factory reset the phone and it won't connect to mobile data then either. When I try to change the radio band it crashes.
Click to expand...
Click to collapse
Wi-fi going? Perhaps there is something on / off in your phone that limits your access to your mobile data network (billing cycle, data usage, roaming, or anything like that). Frankly, my knowledge is limited, I do not know what else it could be. If wi-fi works, try updating it, you may be lucky.
@dn said:
Wi-fi going? Perhaps there is something on / off in your phone that limits your access to your mobile data network (billing cycle, data usage, roaming, or anything like that). Frankly, my knowledge is limited, I do not know what else it could be. If wi-fi works, try updating it, you may be lucky.
Click to expand...
Click to collapse
Thanks mate. Nah me neither. WiFi does work but no joy with mobile. There's no update available and a factory reset never cleared it. I think the issue lies with the radio band. It simply crashes the application whenever I try to access it.
Not receiving incoming calls when in VoLTE
Since my carrier is activating VoLTE through its network
I cannot receive incoming calls. If my phone receives only the 4G signal (without VoLTE) the phone works perfectly. I tried another sim card of the same carrier...same issue! If I put on the phone a sim card from another carrier it works fine, but I think this carrier is not using VoLTE yet. Using the *#*#4636#*#* menu I switched off "provisioning VoLTE" option...but after a few seconds it turns on again automatically. I do not know yet if the problem is linked to my phone, carrier or a problem on Android. Does anybody can help me? Thanks in advance
PS: my phone is running native Android 7.0 and it is updated with the latest firmware version
Try a drastic solution. Reflash your phone. The problems are with MTK firmware structures, MTK firmwares usually results in lost IMEI or NVRAM issues.
I am a fan of anything MTK phablets, tablets, phones and owned mostly Lenovos about 7 devices, all rooted with TWRP. My advise is to reflash the phone (since we already have the firmware), if it doesnt work the first time after reflash , you probably need to reflash a few more time and you will find that after every reflash there will be random functions and apps broken (after the next reflash the functions and apps are OK but others broken) until you will have all 100% OK. That is my experience with MTK SoC.
Good Morning!
Can you tell me if this procedure works on the new model, the P20? Uses Oreo 8.0.0 with Kernel 3.18.60 ...
Thank you very much
Me too
3vo3d said:
Thanks mate. The correct apn had been set and it shows 4g connection at the top but simply refuses to connect to mobile data. It all says its switched on etc. When I type +*+*4636*+*+ into dialer screen to bring up phone settings it is there that it says mobile data disconnected and it simply will not switch on.
I've also factory reset the phone and it won't connect to mobile data then either. When I try to change the radio band it crashes.
Click to expand...
Click to collapse
Hello guys,
I've the same problem with my X18. Everything works fine. My SIM is active and registered and in the notification bar there is a 4G-icon, I can make some calls, receive SMS and so on. But if I use mobile data, the connection will be interruped after few minutes and in the settings dialog the SIM card is disabled.
Reboot, changing SIM slot takes no effectes. This error is reproduceable.
The device has 3 APN-Settings. Is there any oppurtunity to delete these settings, so that I can receive new APN from my provider or to define it manually?
Best regards
Dan
Good review thanks..
I know this is off thread.. I want to install twrp and magsik on my cubot note 7..
Can't find any info anywhere....
Do you know a safe method pls?
Good day team!
I've had this phone since March 7. A global Mi Note 10 Pro 8/256 variant.
The wifi suddenly stopped scanning SSID's.
Bluetooth radio is working, hotspot is working but could not be detected or scanned by other phone. I went to update to the latest 11.0.8 version for the security patch and just about a week after the update it stopped working. I can toggle wifi but it just does not scan for any result. I'm looking for someone who can help or can identify what could possibly wrong.
I have tried this step:
- reset network settings
- reset to factory settings via settings menu
- reset/wipe via stock recovery (volume + and power button)
My mi account could not detect the phone as well. When I try to Find Device - it does detect the phone as "Unknown Device". Also under my Mi Account - devices - it does not show my device registered.
Lastly, I tried the last resort to flash Eu. But mi unlock could not detect my phone even with the latest drivers.
I was wondering if this could s be just a wifi radio sotware issue since wifi can still be toggled on the status bar. If this would be a hardware problem, basically bluetooth radio wont work, right?
Please help me as I am so much incurring data usage for the past 3 weeks due to using this for work.
Please advice. I am lost of tricks.