Database Info

[Q] WiFi issues CyanogenMod 10.1

Hi, not new to CM10.1 , loving it on my Nexus 4... but just flashed it on my newly bought Samsung Galaxy Note 10.1 GT-N8000 (nightlies 20/4) and I am having trouble with my WiFi, it doesnt seem to be able to connect to WiFi ...
After filling my WiFi password, it is stated there as "Connecting" and then, it becomes "Saved,secured with WPA PSK" instead of "Connected"
Found a number of similar posts but none actually worked for me, tried:
- Changing to Static
- Changing Wi-Fi region code
- Something about deleting a file in directory > data/misc/dhcp , but no file is to be found there
- Something about deleting /data/.cid.info , but again, there's no such file in my note 10,1
A screenshot for a more detailed explanation:
http://i806.photobucket.com/albums/yy341/XhaigeX/Screenshot_2013-04-21-20-11-49_zps7b0d2a5f.png

same problems on photon q
i am experiencing the same problems as you. i can only get it to work after a clean install of cm. And I mean clean. a few nightlies ago i could solve the issue with a permission fix thru rom manager.Skrillax put the rom together but i cant ask him because like you i am a junior. Hope a fix comes soon.

[Q&A] [4.4.4] MIUIv5 [Falcon]

Q&A for [4.4.4] MIUIv5 [Falcon]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Xt1033 - miui-v5
Hello folks,
I have used MIUI before and it was simply irresistible to try it out on my XT1033. I was happily running Mokee on it after unlocking, rooting, etc. However, the device was still a 2-SIM variant. I converted it into GPE which worked with no flaws whatsoever. Please note that the xda-developers' guide (or package) didn't quite work for me and I had better luck with this guide.
Having my XT1033 converted to XT1032 (is it really a true conversion?), the following is noted:
System Version: 174.44.9.falcon_umts.Retail.en.GB
Baseband: MSM8626BP_1032.340.63.00R
Kernel: [email protected] # 1
Build No: KLB20.9-1.10-1.9
Android: 4.4.2
Next, booted into TWRP and wiped Dalvik, Cache, Data, System and formatted System (did all these twice to be safe).
Installed the MIUI.V5, which booted like a charm and was thrilled to find 3G Network immediately.
Next, I sent a USSD *123# to check my balance and it came back with a successful output.
However, (the pain starts now), when I tried to call someone the device threw an error ""Unfortunately, the proccess com.android.phone has stopped." The error returns at least 4 times after clicking the "OK" and finally disappears. It recurs if I try to call again.
I checked with the messaging app next, and alas "Message not sent" error increased my despair. I have followed all guides to clear cache, force-close contacts, contacts storage, dialer, etc etc and every last solution that Google could yield.
Lastly, and this ought to have come at the beginning:
Thank you for the wonderful ROM @Tqr, your hard work is appreciated.

XT1033
>This file (telephony-msim.jar) has been modified and might make dual sim working.
Nope. Didn't help. Still No SIM

Hello, i can't find a french translated rom, i've found this link :
https://github.com/ingbrzy/ma-xml-5.0-FRENCH
but i don't know what i'm supposed to do with it.
And, is there a way to hide the navigation bar (expanded desktop) ? And will OTA updates be available ? I don't know MIUI very well

How can i translate MIUI rom? i need spanish :/ can someone tell me? contact me at [email protected], give me the files where i can do manual translations and will upload them here :/ i can help to translate MIUI to spanish

Same problem here
xibalban said:
Hello folks,
I have used MIUI before and it was simply irresistible to try it out on my XT1033. I was happily running Mokee on it after unlocking, rooting, etc. However, the device was still a 2-SIM variant. I converted it into GPE which worked with no flaws whatsoever. Please note that the xda-developers' guide (or package) didn't quite work for me and I had better luck with this guide.
Having my XT1033 converted to XT1032 (is it really a true conversion?), the following is noted:
System Version: 174.44.9.falcon_umts.Retail.en.GB
Baseband: MSM8626BP_1032.340.63.00R
Kernel: [email protected] # 1
Build No: KLB20.9-1.10-1.9
Android: 4.4.2
Next, booted into TWRP and wiped Dalvik, Cache, Data, System and formatted System (did all these twice to be safe).
Installed the MIUI.V5, which booted like a charm and was thrilled to find 3G Network immediately.
Next, I sent a USSD *123# to check my balance and it came back with a successful output.
However, (the pain starts now), when I tried to call someone the device threw an error ""Unfortunately, the proccess com.android.phone has stopped." The error returns at least 4 times after clicking the "OK" and finally disappears. It recurs if I try to call again.
I checked with the messaging app next, and alas "Message not sent" error increased my despair. I have followed all guides to clear cache, force-close contacts, contacts storage, dialer, etc etc and every last solution that Google could yield.
Lastly, and this ought to have come at the beginning:
Thank you for the wonderful ROM @Tqr, your hard work is appreciated.
Click to expand...
Click to collapse
M also facing the same problem phone and sms app does not work (force close) and after this network goes down. Did you find any solution? plz share if so.

[Q] [ROM][WIP][NAND] Omni - 25.10.2014 - WiFi Error

Hello to everyone,
volk204 has released this sensational rom for the remaining BADA-Users among us. Thank you for your support - this keeps the Samsung Wave S8500 alive.
I'm following this development for a long time, but this time it seems I need some additional help. I installed everything correctly - read all the available posts until now, but haven't found a solution for the WiFi Problem.
What's not working? After setting up all options like e.g. ("wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only), the Wifi is still not connecting. I tried to wipe the cache, reset the phone to standard settings, re-flashed it. With or without sd-card no success .
Would it be possible that my network operator has something to do with it? I mean I still use a smartphone with no internet usage (except WIFI) - so there is no broadband package included.
Maybe someone is able to help me out
thanks in advance

WIFI error +1
Hello
I also encountered the same problem
I hope there is a solution
My English ability is very bad
These are used google translate

Q] [ROM][WIP][NAND] Omni 4.4 - 11.12.2014
Hello to the Forum
I am new on the Forum i do not know exactly how it works Please excuse me
I have a SAMSUNG 8500 with Bada
I would like to suppress Bada and replace it with ANDROID
I Tried the procedure listed in the Topic ROM][WIP][NAND] Omni 4.4 - 11.12.2014
i could Flash Bootfiles Startkernel and FOTA with Multiloader
i do not understand the following and I do not want to have my Phone Bricked ! - -
Do I have to proceed the Android recovery immediately after that step Before loading the SDCard ?
ROM means the Android File ? Where can I get this ROM ?
What Does it mean > choose zip with ROM ?
Do you have to set the Phone in - DOWN LOAD MODE to make tis procedure ? vol low -+ camera + power
Thank you in advance for your Help - Georges
Multi-quote
Reply
Edit

[ROM][WIP][NAND] Omni 4.4 - 11.12.2014
Hello Dukekox
Sorry I cannot Help you for your WiFi Problem but Perhaps you will accept to spend a few minutes to Help me since you succeeded to install Android on your Wave S 8500
I am new on the Forum and not an expert in Flashing ROMS
I have a SAMSUNG 8500 with Bada I would like to suppress Bada and replace it with ANDROID
I Tried the procedure listed in the Topic by Volk ROM][WIP][NAND] Omni 4.4 - 11.12.2014
i could Download Bootfiles ( I have unzipped is it the right thing to do ? ) Startkernel and FOTA i have also Multi loader V5.67
i do not understand the following and I do not want to have my Phone Bricked ! - -
What happens after the Android recovery and see on the screen " Partitions had been prepared" ? Bada is stil in use ? You still can Boot on Bada ?
ROM means the Android File ? Where can I download this ROM ?
I copy the ROM on the Root of SD Card - OK
How do you do for the the Action Install ? Open the Folders in the Phone - SD Card - find the File of ROM an click on it - It opens Install ?
Do you have to set the Phone in - DOWN LOAD MODE ? vol low -+ camera + power
More personnal Questions - Which ROM did you actually install ? KitKat 4.4.4 ? Gingerbread ? Cyanogen mod ?
Too bad if you cannot have the Wifi - You can however have the applications on Playstore ?
Does it suppress Bada ? - Is it possible to reinstall Bada ?
Many Thanks in advance for your Help - Georges
dukekox said:
Hello to everyone,
volk204 has released this sensational rom for the remaining BADA-Users among us. Thank you for your support - this keeps the Samsung Wave S8500 alive.
I'm following this development for a long time, but this time it seems I need some additional help. I installed everything correctly - read all the available posts until now, but haven't found a solution for the WiFi Problem.
What's not working? After setting up all options like e.g. ("wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only), the Wifi is still not connecting. I tried to wipe the cache, reset the phone to standard settings, re-flashed it. With or without sd-card no success .
Would it be possible that my network operator has something to do with it? I mean I still use a smartphone with no internet usage (except WIFI) - so there is no broadband package included.
Maybe someone is able to help me out
thanks in advance
Click to expand...
Click to collapse

[Q&A] CyanogenMod 12.0 for Photon Q

Q&A for CyanogenMod 12.0 for Photon Q
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CyanogenMod 12.0 for Photon Q. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

So far so good for CM12, everything runs really smooth. Only issues are the default text app send button is grayed out and won't let you send but using Google messenger app it works fine. Is there any reason to why the send button wouldn't work?
LTE seems to work well but visually every now and then it seems to disconnect/reconnect but functions fine. And just a quick/dumb question which CDMA subscription should we use, RUIM/SIM or NV as I found info on RUIM/SIM but couldn't really find much on the definition of NV.

I really wanted to know that everybody has no problem at all in logging in Google+ with the latest version of its client.
I'm having trouble the most recent one that I can download from Play Store, : v5.1.0
I had to restore the backed up version of v5.0

I recently got the multimedia dock for this phone and I've noticed that some things don't work. None of the USB ports on the dock seem to interface with the OS, but any peripheral connected by a USB OTG cable (while not in the dock, of course) works just fine. Also, the device doesn't seem to detect that it is in a dock at all; I have it set to daydream when it's docked, but nothing happens.
Does anybody else have these issues? Is there a known or planned solution?
Thanks!

Hei just another quicky:
I had problems with twrp unable to mount /data on encrypted phone. I was never asked for passphrase also it did not detect data was formated as f2fs and assumed ext4.
After factory reset I reformated data and cache to f2fs again (as I think the performance gain is real) and cleanflashed latest cm12 nightly + gapps.
After setting up my phone it became slugish fast again, also battery did drain fast (also the phone did get real hot)
My circumvention so far is limiting Background processes to 2 within Dev options. Since then phone stays much cooler, everything works as expected normal cpu usage shows 2.5/3.2/3.5.
Before that phone was sometimes at 12/9/8 or so and thus bekame unresponsive/sluggish.
Does anyone know the standard count of background processes? Form Q?
Since i did not discover any strange behavior/lags since i switched to only 2 backgroundprocesses anyone knows what kind of usage could result in problems with lower backgroundprocesses?
Thanks in advance!

CM 12.0 nightlies I/O and issues
So I switched over to CM12 because of the ability to switch the filesystems to f2fs. And so far I have seen a pretty decent improvement in the response, speed, and general performance with CM12.
A few issues have come up though:
CM nightly 03232015
-the cLock widget just randomly stopped functioning. Worked for a day or two, then stopped working. I wasn't able to set the alarm and clicking on the time on the home screen does nothing. Disabled cLock and am using the default Deskclock instead (I need to be able to set alarms).
-the messaging app was not working correctly... I was able to receive texts but the send button was greyed out and would not let me click on it. This is both over Wi-Fi and 3G and 4G LTE. Had to revert to 8sms that I was using on CM10...
-the themes are applied inconsistently... not all apps or system dialogs are themed when I use ThemeDIY to create/apply my own theme.
-equalizer doesn't seem to make a big difference...
-doesn't seem to remember wifi logins... keep getting the "sign in to wireless network" notification (I've already signed in)... the sign in page does not open in Chrome, but rather a separate browser or system page that won't offer to save my password (though it does autofill the username)...
-weird issues using adb... even though I've authorized the computer, and have root access on the phone and am running adb root, it won't let me write to certain parts of the file system (I couldn't adb push bootanimation.zip /system/media/bootanimation.zip error was "read-only filesystem")
I know it's a nightly, just wanted to see if anyone else has these same issues and to make sure the developers are seeing this. For the record, I did a wipe and format (since I was going to change the file system,) and this is a clean install of both TWRP and CM12.
Thanks!
---------- Post added at 06:15 PM ---------- Previous post was at 05:58 PM ----------
breakerwaves said:
So far so good for CM12, everything runs really smooth. Only issues are the default text app send button is grayed out and won't let you send but using Google messenger app it works fine. Is there any reason to why the send button wouldn't work?
LTE seems to work well but visually every now and then it seems to disconnect/reconnect but functions fine. And just a quick/dumb question which CDMA subscription should we use, RUIM/SIM or NV as I found info on RUIM/SIM but couldn't really find much on the definition of NV.
Click to expand...
Click to collapse
I didn't know what to use either so I left it on NV. Haven't noticed a difference in signal or call quality or anything. I am guessing since we're on Sprint and there is no SIM card that RUIM/SIM won't work?

Im am currently running on NV too, but with german sim.
To the other problems you have, I don"t have those. Sms works. CLock works, alarms work... I am running without any themes just switched the stock trebuchet launcher to apex. I am also on f2fs.
I also would like to know the difference between NV and RUI/SIM, and which one should be preffered with simcard mod.

kecksk0enig said:
Im am currently running on NV too, but with german sim.
To the other problems you have, I don"t have those. Sms works. CLock works, alarms work... I am running without any themes just switched the stock trebuchet launcher to apex. I am also on f2fs.
I also would like to know the difference between NV and RUI/SIM, and which one should be preffered with simcard mod.
Click to expand...
Click to collapse
I can't speak to the RUI/SIM issue but I don't know how to switch themes off. As far as my SMS and cLocks idk it is possible that I disabled the wrong app I don't like to run more then the bare minimum. As for the theme I ended up downloading a dark theme from the app store which is wonderful looking!! It is called Nicholas' Dark Material. In case you're looking for dark like me.
Do you have issues with the gallery or camera? I think I saw somewhere on the xt897 forum a link to motorola's camera and gallery apps... are you able to change the save location for pictures or no?
I also had an issue where the navigation bar does not render right when I watch full screen video in landscape mode. May have to do with me forcing GPU render under developer options. I'd take it off but I can't remember how I got there lol
---------- Post added at 11:27 PM ---------- Previous post was at 11:21 PM ----------
I cannot set the custom color for notifications in CM12... but there is a post that says the colors were retained on an upgrade from CM11. Well I wiped and did a clean install rather than an upgrade so is there an .xml file or a settings I can edit? I'm comfortable with file manager and editor and adb and shell...

CM 12 update
I have a simple question so if I am not asking it in the right place, I apologize.
If I do one of the CM12 updates (the nightlies) through the Update in the Settings Menu on my phone, does it wipe the phone? Or does it only update relevant system files and keep my apps and data??

nasch007 said:
I have a simple question so if I am not asking it in the right place, I apologize.
If I do one of the CM12 updates (the nightlies) through the Update in the Settings Menu on my phone, does it wipe the phone? Or does it only update relevant system files and keep my apps and data??
Click to expand...
Click to collapse
If you only apply the update, it will not wipe the device. You would have to wipe it manually in recovery. It will apply a so-called "dirty flash" as you are not wiping any partitions.
CM12-->CM12, should be fine. Of course before you report any issues try a clean flash (or if it's a single app FC'ing, try clearing data on that single app).

I'm having tons of trouble using this with Sprint.
When I lock it to CDMA and/or EVDO mode, Logcat shows that it's trying to connect using a C Spire APN. If I lock it in LTE-only mode and select Sprint APN, it gets a good data connection. The APN menu is foolishly disabled for CDMA/EVDO so I cannot correct the issue. Why is it trying C Spire? How can I fix 3g and MMS settings to work?
CM11 worked great in all conditions, and MMS worked out of the box.

I'm trying to flash CM12 on a FreedomPop device and I'm getting the message "This package is for device: xt987,asanti_c; this device is asanti". I was able to flash CM11 from the nightlies page but no luck with CM12 nightlies nor with the CM12.1 that was posted here on XDA.
Any help to flash CM12 on this device? :good:

Alien987 said:
I'm trying to flash CM12 on a FreedomPop device and I'm getting the message "This package is for device: xt987,asanti_c; this device is asanti". I was able to flash CM11 from the nightlies page but no luck with CM12 nightlies nor with the CM12.1 that was posted here on XDA.
Any help to flash CM12 on this device? :good:
Click to expand...
Click to collapse
In the short term you can change the meta-inf file in the update.zip and change the assert line to allow asanti.
In the future, the CM maintainer probably needs to update the source to allow your device... odd that it worked in CM11 but not 12 tho.
Are you going from CM11 to CM12? Even if you clean flashed.

arrrghhh said:
In the short term you can change the meta-inf file in the update.zip and change the assert line to allow asanti.
In the future, the CM maintainer probably needs to update the source to allow your device... odd that it worked in CM11 but not 12 tho.
Are you going from CM11 to CM12? Even if you clean flashed.
Click to expand...
Click to collapse
Thanks for the tip!
First I tried to flash CM12 directly but got the error. Then decided to try with CM11 and it worked so I hoped it would work to update to CM12 but got the same error again.
Just to double check I'm not doing it wrong, this is what I tried to flash:
CM12 (Failed): http://download.cyanogenmod.com/get/jenkins/107228/cm-12-20150417-NIGHTLY-xt897.zip
CM11 (Success): http://download.cyanogenmod.com/get/jenkins/100850/cm-11-20150216-NIGHTLY-moto_msm8960_jbbl.zip
What I understood by reading around is that for CM12 I should use the xt897 file even though it's differently named than the CM11 one (moto_msm_8960_jbbl).
Can you please confirm that I'm using the correct CM12 one?
Thanks

Alien987 said:
Thanks for the tip!
First I tried to flash CM12 directly but got the error. Then decided to try with CM11 and it worked so I hoped it would work to update to CM12 but got the same error again.
Just to double check I'm not doing it wrong, this is what I tried to flash:
CM12 (Failed): http://download.cyanogenmod.com/get/jenkins/107228/cm-12-20150417-NIGHTLY-xt897.zip
CM11 (Success): http://download.cyanogenmod.com/get/jenkins/100850/cm-11-20150216-NIGHTLY-moto_msm8960_jbbl.zip
What I understood by reading around is that for CM12 I should use the xt897 file even though it's differently named than the CM11 one (moto_msm_8960_jbbl).
Can you please confirm that I'm using the correct CM12 one?
Thanks
Click to expand...
Click to collapse
Yes, that's the correct one.
The CM maintainer clearly states the reasoning in the CM12 thread:
kabaldan said:
Please note:
In CM12, the Motorola 2012 msm8960 device line has been de-unified again, so moto_msm8960/moto_msm8960_jbbl builds are dead from now on.
Please check the xt897 device link for new Photon Q builds.
Click to expand...
Click to collapse

arrrghhh said:
In the short term you can change the meta-inf file in the update.zip and change the assert line to allow asanti.
In the future, the CM maintainer probably needs to update the source to allow your device... odd that it worked in CM11 but not 12 tho.
Are you going from CM11 to CM12? Even if you clean flashed.
Click to expand...
Click to collapse
Adjusting the meta-inf to check for "asanti" instead of "asanti_c" worked perfectly. Thanks for your help!
Now I have to find out why after I flash gapps I start to get multiple crashes related to Google Services and Google Apps.
Edit: Well, just in case someone face the same problem in the future. I updated to the latest TWRP recovery directly from their webpage (initially I used Rashr app) and that solved all my problems, including the initial error when flashing CM12 nightly.

[Resolved] Factory reset gone wrong on LG Bello 2(X150)!

So I accidentaly removed the odex file for Google Service Framework,after a lot of tries to fix it I got into recovery mode and wiped the data from there...now I can't get past the introduction screens(the google services,name introduction and date & time setting tabs reapear over and over again)...and the error"com.google.process.gapps" has stopped working appears over and over again...so does anybody know what should I do?

I see you posted a long time ago, i hope you fixed the problem? If not, I'll be making a post in a few days, uploaded all the files on Mediafire tonight. Just to reach 10 posts for links. I actually did it. I think it has to work on every LGX150. I've found working ROM, and all other tools necessary. The only requirement is for you phone to be able to be recoginzed in device manager.
Also, I'll link other users I've seen are facing similar issues:
@s7L, @PaddiM8, 
 @spielwuffi Does your PC actually make any sound? Can any device be seen in Device manager?