Hello to everyone,
volk204 has released this sensational rom for the remaining BADA-Users among us. Thank you for your support - this keeps the Samsung Wave S8500 alive.
I'm following this development for a long time, but this time it seems I need some additional help. I installed everything correctly - read all the available posts until now, but haven't found a solution for the WiFi Problem.
What's not working? After setting up all options like e.g. ("wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only), the Wifi is still not connecting. I tried to wipe the cache, reset the phone to standard settings, re-flashed it. With or without sd-card no success .
Would it be possible that my network operator has something to do with it? I mean I still use a smartphone with no internet usage (except WIFI) - so there is no broadband package included.
Maybe someone is able to help me out
thanks in advance
WIFI error +1
Hello
I also encountered the same problem
I hope there is a solution
My English ability is very bad
These are used google translate
Q] [ROM][WIP][NAND] Omni 4.4 - 11.12.2014
Hello to the Forum
I am new on the Forum i do not know exactly how it works Please excuse me
I have a SAMSUNG 8500 with Bada
I would like to suppress Bada and replace it with ANDROID
I Tried the procedure listed in the Topic ROM][WIP][NAND] Omni 4.4 - 11.12.2014
i could Flash Bootfiles Startkernel and FOTA with Multiloader
i do not understand the following and I do not want to have my Phone Bricked ! - -
Do I have to proceed the Android recovery immediately after that step Before loading the SDCard ?
ROM means the Android File ? Where can I get this ROM ?
What Does it mean > choose zip with ROM ?
Do you have to set the Phone in - DOWN LOAD MODE to make tis procedure ? vol low -+ camera + power
Thank you in advance for your Help - Georges
Multi-quote
Reply
Edit
[ROM][WIP][NAND] Omni 4.4 - 11.12.2014
Hello Dukekox
Sorry I cannot Help you for your WiFi Problem but Perhaps you will accept to spend a few minutes to Help me since you succeeded to install Android on your Wave S 8500
I am new on the Forum and not an expert in Flashing ROMS
I have a SAMSUNG 8500 with Bada I would like to suppress Bada and replace it with ANDROID
I Tried the procedure listed in the Topic by Volk ROM][WIP][NAND] Omni 4.4 - 11.12.2014
i could Download Bootfiles ( I have unzipped is it the right thing to do ? ) Startkernel and FOTA i have also Multi loader V5.67
i do not understand the following and I do not want to have my Phone Bricked ! - -
What happens after the Android recovery and see on the screen " Partitions had been prepared" ? Bada is stil in use ? You still can Boot on Bada ?
ROM means the Android File ? Where can I download this ROM ?
I copy the ROM on the Root of SD Card - OK
How do you do for the the Action Install ? Open the Folders in the Phone - SD Card - find the File of ROM an click on it - It opens Install ?
Do you have to set the Phone in - DOWN LOAD MODE ? vol low -+ camera + power
More personnal Questions - Which ROM did you actually install ? KitKat 4.4.4 ? Gingerbread ? Cyanogen mod ?
Too bad if you cannot have the Wifi - You can however have the applications on Playstore ?
Does it suppress Bada ? - Is it possible to reinstall Bada ?
Many Thanks in advance for your Help - Georges
dukekox said:
Hello to everyone,
volk204 has released this sensational rom for the remaining BADA-Users among us. Thank you for your support - this keeps the Samsung Wave S8500 alive.
I'm following this development for a long time, but this time it seems I need some additional help. I installed everything correctly - read all the available posts until now, but haven't found a solution for the WiFi Problem.
What's not working? After setting up all options like e.g. ("wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only), the Wifi is still not connecting. I tried to wipe the cache, reset the phone to standard settings, re-flashed it. With or without sd-card no success .
Would it be possible that my network operator has something to do with it? I mean I still use a smartphone with no internet usage (except WIFI) - so there is no broadband package included.
Maybe someone is able to help me out
thanks in advance
Click to expand...
Click to collapse
Related
Heya,
I bought a Sophone V 75 (an iPhone 4S copy, almost identical to Goophone Y5).
It is an andorid based phone
Naturally the OS was horrible, all in Chinese.
Well I followed instructions here http://forum.xda-developers.com/showthread.php?t=1896242 how to root the phone.
Then I used the Rom manager app to change the recovery file and install the ICS 4.0.3 ROM for the Sophone V75 with working Google Play Store.
All good until I realized that I have no data connection what so ever, not even edge (not to mention 3G /4G).
In addition, the wifi reception is horrible, and I have to stand next to the router to get any data.
(I live in Finland, if that has anything to do with the poor connection [i.e. an ICS made for the Asian market etc.?], I am a complete noob in modifying / rooting etc.)
My question:
1. Can I install a radio image file designed for another device (naturally there isn´t really anything made for the Chinese knock-off)
2. Can I use the Rom manager to boot to recovery, select and flash the radio.img file that is suitable. Or do I need some special software for that.
I basically now have a phone whit great specs but which is useless due to bad wifi and no data connection! (paperweight) :crying:
Thanks for your input!
NO 3G or DATA CONNECTION? - TRY THIS!
JuhanaS said:
Heya,
I bought a Sophone V 75 (an iPhone 4S copy, almost identical to Goophone Y5).
It is an andorid based phone
Naturally the OS was horrible, all in Chinese.
Well I followed instructions here http://forum.xda-developers.com/showthread.php?t=1896242 how to root the phone.
Then I used the Rom manager app to change the recovery file and install the ICS 4.0.3 ROM for the Sophone V75 with working Google Play Store.
All good until I realized that I have no data connection what so ever, not even edge (not to mention 3G /4G).
In addition, the wifi reception is horrible, and I have to stand next to the router to get any data.
(I live in Finland, if that has anything to do with the poor connection [i.e. an ICS made for the Asian market etc.?], I am a complete noob in modifying / rooting etc.)
My question:
1. Can I install a radio image file designed for another device (naturally there isn´t really anything made for the Chinese knock-off)
2. Can I use the Rom manager to boot to recovery, select and flash the radio.img file that is suitable. Or do I need some special software for that.
I basically now have a phone whit great specs but which is useless due to bad wifi and no data connection! (paperweight) :crying:
Thanks for your input!
Click to expand...
Click to collapse
HI there!
I also flashed the Android ICS 4.0.3 version and I did NOT have 3G or DATA CONNECTION
working after this update???
(I used the Recovery.img I uploaded on this page to flash phone to this ICS and it is available below on this page:
http://forum.xda-developers.com/showthread.php?t=1896242&page=3
1. Put this on the root of your internal SD card of your Sophone-Godphone V75.
2. Then to flash the phone, turn OFF the phone, and connect Sophone V75 with USB cable to computer.
3. Press POWER ON and VOL+ BUTTON at same time and hold for 7-8 seconds!
The Apple boots for some seconds and after this a blue RECOVERY MENU appears in english!
4. Use the vol buttons to scroll and confirm your choices with Power button!
MY SOLUTION TO MAKE DATA CONNECTION WORKING:
The mistake I made was to edit SIM MANAGEMENT inside Settings and I changed the title of the Operator
from TELIA(default name) to HALEBOP (Halebop uses TELIA as netprovider) and also I edited(changed!)
and wrote the cellphonenumber inside SIM MANAGEMENT under "Enter Phone number".
I think it may be this problem if you insert your own titles and number and the phone gets mixed up?
I tried after this to insert APN settings from the Operator HALEBOP(Sweden)all the time but no success!
At last I got tired and tried to flash to other firmware version Sophone V75 but it did NOT work either??
So here I was stuck with this ICS Android 4 with NO DATA CONNECTION and not possible to reflash!!
HERE IT GOES:
So only thing to do was to TURN OFF the phone and use the Recovery.img to boot into Recovery Mode.
As I described in the beginning of this reply!
In this Recovery Menu I first chosed to:
1. Wipe Data/Factory Reset
after this was done I chosed:
2. Clear Cache
and after this:
3.Reboot !
The phone rebooted and took some time and after this it started up and my default Telephone Operator
TELIA was titled under SIM MANAGEMENT as default after this factory reset and clear cache!
So I DID NOT change anything after this and just simply went into SETTINGS/ SIM MANAGEMENT
and pressed Data Connection and chosed TELIA inside and it WORKED!
The letter E showed up directly up in the top of the display screen beside the "signal strength" icon!
So I recommend to do exactly as I described and hopefully your V75 will be working with DATA CONNECTION!
GOOD LUCK!
Hi, i got a prestigio multipad 5080 pro, i rooted my device and everything was fine until i changed the DPI of my device in order to play dead space. Now my device keeps says "unfortunately, launcher has stopped" on a loop is there any way to fix this? i have tried factory reset and it did nothing.
Thanks.
a good rom and stable so far.
download from here
http: // x--t-e-a-m. blogspot. it/ and click on Download:
XTeam 4.1 QUI
plus for setting your external sd as a nand *as a main installing card... use this http :// crewrktablets. arctablet. com/?wpfb_dl=330
use google translate cause its italian website...anyway ...
steps are easy ... unrar XTeam 4.1 ...
1) Turn off your device
2) Locate the folder Rockusb_driver in the XTeam 4.1 folder and install the drivers for your computer.
3) on the tablet Hold sounds Down Button and connect the device.
4) open with right click and run as administrator the rk29update.exe
5) press the button "formatta!!!"
6) tick the "Loader"
7) Download this kernel from here: http: // www .2shared. com/file/GmdSyNG1/kernel_for_pmp_5080cpro_with_o.html
 replace the kernel with the one that i gave you from the link
9) press the "Aggiorna! ! " button and wait until the program overwrite the new firmware
10)when the tablet reboot it will go through cwm and the install the
Oma CM10 ExtSD To NAND OTG Fix.
11) the new firmware have OTA updater so update your tablet until you have no other updates...(i realised that i had to download the updates from ota and install them manual but anyway...)
12) in one point the updates from ota updater will change your kernel but dont worry.you will just lose temporary the screen rotation so...
install all the updates and in the end run the rk29update.exe again untick all the things there and keep only the kernel ticked and use the kernel i gave you.that match with your 5080 cpro. this time dont push formatta !!!.
Just overwrite the kernel and click aggiorna! !
your device will restart and ta da !!! you have the latest firmware for your Prestigio 5080 C PRO. overclocked and rooted with 1 giga for apps
plus 2x faster than factory's firmware.
i wanna say a big thanx to OMA for the kernel http: //crewrktablets. arctablet. com/
a big thanx to X TEAM for this awesome firmware
and a huge thanx to my self that i had the patience to search for the specific model what to do. It took me about 2 days to gather all the informations i needed.
And a huge apologize to oma that i didnt use his JB version for the prestigio tablet but i test it and it was kinda slow and laggy for my tablet xD
ps: in case that u need more info i ll be around to help you
Remember the steps are only for Prestigio PMP 5080 C PRO and NOT for the Prestigio 5080B.
For the Prestigio 5080B you must find the specific Kernel that works on the device cause else you will have problem with the ROTATION
Sent from my Xteam Smartpad 810c using Tapatalk HD
Hi Bbanana
My phone was SHW-M110S desperately looking for upgrade to 2.3.6
first i downloaded & used Samsung ROM, which looks just a base version & i was unable to see IMEI no (*#06#) it always says UNKNOWN APPLICATION, + other minor annoying issues , then i started checking every ROM mentioned below link
http://forum.xda-developers.com/showthread.php?t=1856992
finally when i installed "BBANANA WF07 Ultimate Edition" Really nice , i could simply see my IMEI no & also has better look, really this ROM is strongly recommendable ( it is not only just fast but has little Chinese/Korean default applications )
But, one small thing like,
in top slider i do see "Data" "WiFi" enable/disable symbols , but those does not look working as intended
meaning if i wanted to enable "Data" 3G internet i should go to "Settings ->3G data Call Settings -> Enable/Disable"
Is there any fixed version of this available ?
what is this "Update.zip"
This lik does not seem working , can u update this ?
http://www.4shared.com/zip/Bbs-atE1/update.html
Regards
Raj
Download link https://download.lineageos.org/osprey
There is a need to maintain list of stuff not working in the nightlies, since some people have Osprey as their primary phone
The purpose of this post is for easy access to a list of bugs by both the developers and the end user
Feel free to add to the post
-mention the ROM version
-the bug
-and any other relevant information
List
version lineage-14.1-20170125-nightly
Bug : Cellular Data doesn't work after disconnecting from Wifi
Temporary Solution : Developer Options -> Cellular data always active
Bug : When music is played through headphones and charger is connected/disconnected sound is played via both the headphones and speakers. Also happens for Shutter Sound
Bug : Random Bluetooth Disconnections after long periods of bluetooth being connected
Solution : Disable Battery Optimization on all bluetooth related services
Bug: version: lineage-14.1-20170302 -lineage-14.1-20170309
Bug: Phone doesn't rescan new media such as Whatsapp images, downloaded images
Temporary Solution : Manually rescan media
Ideally it should be in the first post of the LOS thread in Original Android Dev. But if you manage to maintain it, it could be referenced.
Hey guys, my phone is stuck on "Checking for updates" and I am looking for a solution. If I install this rom will it fix my problem?
Is it as easy as downloading it, starting on bootloader and $ adb sideload thisthing.zip ?
All the help is highly appreciated, I am not interested in modding stuff or special apps, I just want my phone to run again. Thanks.
MOTO G3 - XT1540 2015
LostInTheDarkness said:
Hey guys, my phone is stuck on "Checking for updates" and I am looking for a solution. If I install this rom will it fix my problem?
Is it as easy as downloading it, starting on bootloader and $ adb sideload thisthing.zip ?
All the help is highly appreciated, I am not interested in modding stuff or special apps, I just want my phone to run again. Thanks.
MOTO G3 - XT1540 2015
Click to expand...
Click to collapse
Are you on stock rom? A simple reboot should fix the problem. And if you could send screenshots that would be good
M_Maha said:
Are you on stock rom? A simple reboot should fix the problem. And if you could send screenshots that would be good
Click to expand...
Click to collapse
If by stock rom you mean the original and official rom then yes. I've rebooted a thousand times now, wiped data and cache another thousand times, recovery/reset another hundred times, and got adventurous to flash a rom via adb sideload but it complained about invalid signature or something. Still stuck on "checking for updates".
The screenshot is a blue screen with a yellow progress line telling me "Checking for updates" just after the welcome and wifi verification., just like this one but with a different label "Software Update - Checking for updates": http://www.androidpolice.com/wp-con...nexus2cee_screenshot_20161020-090044_1024.png
Hi guys,
I experienced a very strange issue with whatsapp at the moment. Just bought a Galaxy S4 I9505 and put some CM11 on it. Everything is working like a charm except of whatsapp.
Here I can open the app - getting the alert that my custom rom was recognized - and then I can enter my phone number.
But whatever I'am entering - I CANNOT CLICK "NEXT" oO
I've tried resetting the DPI to default / disabling root / developer mode / cleaned cache with dalvik etc. but nothing seems to work.
Did any1 of you guys had this issue and solved it finally?
Thanks for your help!
ask a moderator to move your thread to Galaxy S4 forum, you might get answer there.
why this had been moved to "General questions" ? I've posted this in the Whatsapp section as this is a specific question about Whatsapp?
Well in fact I have changed the ROM I used and it was working - only with this CM11 version the error occurs.
I can remember I had this issue once on a Blackberry Q10 with the android app of Whatsapp - where I needed to use the magnification tool to hit the "Next" button - but it did not help on android.