I think I just ran into my first real problem with the phone. I got a glass screen protector on Amazon, and it absolutely refuses to recognize my fingerprint with the glass on it. The error just keeps telling me to press harder. I never had any issue before without one on.
Took the screen protector off, and now it's back to normal.
I have each thumb trained twice, so recognition shouldn't be a problem at all. I think it's just too thick and it isn't sensing enough pressure to register the fingerprint.
Anyone find a good screen protector that works with fingerprint? I may have to go with a plastic one that won't be as thick as glass.
Harfainx said:
I think I just ran into my first real problem with the phone. I got a glass screen protector on Amazon, and it absolutely refuses to recognize my fingerprint with the glass on it.
Click to expand...
Click to collapse
This is disappointing. When I first looked into this, I found someone claiming to have tested the Oneplus 6T fingerprint sensor with 3 screen protectors on top of each other. I concluded it was not an issue. But now I am seeing plently or articles suggesting that it depends. E.g. "Vivo did mention that only screen protectors of a certain thickness will work with the sensor". I wonder if Nokia will offer or recommend a screen protector.
Also, I don't know if Nokia are using the same sensor as Oneplus, but this is interesting: "[when registering] make sure your environment is not too bright. If possible, you should register a fingerprint in a completely dark environment."
Edit, also spotted this: "We also recommend re-registering your fingerprint every time you add or remove a screen protector."
So as an update, I applied the second screen protector that came in the 2-pack. Removed all of my fingerprints that were stored, and tried to setup new prints.
Took me about 200 tries to get my right thumb registered (not exaggerating), but I couldn't get it to actually read when trying to activate it.
Couldn't get my left thumb to register at all. Just kept saying to press harder. I was pressing so hard I thought I'd break the screen if I pushed harder.
Tried in bright light, as well as a completely dark room. Didn't change the ability for it to register at all.
So overall for this phone, I'm going to say glass screen protectors won't reliably work with the fingerprint scanner. I've ordered a plastic screen protector. Going to try that out, as I'm pretty sure it will work.
I imagine the thickness of glass is the culprit here, due to how the fingerprint sensor works even without a screen protector applied. It seems more difficult to activate than other in-display readers (I have 3 others with in-display readers and they're all incredibly easy to use).
Fingerprint issues aside, I normally go for glass screen protectors because the plastic ones tend to cause more drag when using the phone.
I have generally seen two models. One which is clear and another which has a black border, both with cutouts for sensors, cameras and speakers.
I'm unable to add a link as I'm new to the forums but both examples can be seen on Amazon by searching 'GEEMEE 9h nokia 9 pureview'
Has anyone bought these or similar protectors?
I am interested to know if the black border one covers any part of the screen. I think it looks better on the pictures but in real life I'm not sure how it would look.
I got the Mr.Shield 9h glass and it works fine. The issue with the fingerprint is a software issue. The warning to press harder is not correct. I've verified that the reader will read with normal to light pressure. Hopefully they will release an update that fixes it within the next couple months.
MoseMan said:
Fingerprint issues aside, I normally go for glass screen protectors because the plastic ones tend to cause more drag when using the phone.
I have generally seen two models. One which is clear and another which has a black border, both with cutouts for sensors, cameras and speakers.
I'm unable to add a link as I'm new to the forums but both examples can be seen on Amazon by searching 'GEEMEE 9h nokia 9 pureview'
Has anyone bought these or similar protectors?
I am interested to know if the black border one covers any part of the screen. I think it looks better on the pictures but in real life I'm not sure how it would look.
Click to expand...
Click to collapse
I just got the screen protector with the black borders, and it doesn't cover any part of the screen. I think it looks good. But I was a bit sloppy when I applied it and one of the corners has an air bubble which I can't get rid of.
But since I applied it, the fingerprint scanner is causing me problems. It has problems recognizing my prints
Zurion said:
I just got the screen protector with the black borders, and it doesn't cover any part of the screen. I think it looks good. But I was a bit sloppy when I applied it and one of the corners has an air bubble which I can't get rid of.
But since I applied it, the fingerprint scanner is causing me problems. It has problems recognizing my prints
Click to expand...
Click to collapse
I ended up going for a clear one tempered glass protector. I have a couple of tiny bubbles which was just me rushing as I was excited.
The finger print sensor works fine as long as I get my finger in the correct place but that is a challenge. My thumb is more difficult but still possible. It hasn't been a massive burden though because I have been using face and trusted bluetooth device to good effect.
Related
Despite being careful, my screen is increasingly getting scratched. The scratches are only noticeable when the device is off (thank goodness).
If there are any other persons with the same problem, please post here.
I guess that you did not use a screen protector, right?
Correct. I also own a TyTn II and have no issues with the screen whatsoever. Of all the devices I have owned over the years, only this TC has been an issue.
I was noticing the same so applied the included screen protector... I usually don't bother as I don't like them and the device is a throwaway after a year anyway so it's not a big deal. But in this case I figured if it was like that after a few weeks then after 6 months I'd probably not be able to see the screen!
I've had a few Palm devices before i switched to WM and i noticed this scratching as well......Luckily i'm using the included protector.
I have to say on my previous Palms i didn't have this problem, also while using a protector, which makes me suspect that the stylus is the real problem here.
Any thoughts on this?
I use the screen protector, and also got some spares. I also cover the whoel device with a liquid "screen" protector to helpthe faces from getting ruined. So far so good
Problem with the Touch Cruise (Polaris...) is, that the screen is - unlike the Kaiser's - flat and not indent. This means, its exposed to EVERYTHING it touches. Thus chances are higher you'll get one or two scratches once in a while.
Second thing which I can only cite other ppl on other forums: those Polaris allegedly have a softer top layer to be able to operate the unit using only your finger. This would support catching scratches as well...
I'd use the protector. It's a shame having scratches on that mirrored surface.
Schaggo, can you indicate what other forums people are commenting about the screen?
I am interested in your view that the top layer is softer than most others.
i agree that the stylus is the problem ... to much thin... , i tried one from nintendo ds , it's much more rounded and it slide better ( sorry for my english...)
vdavide said:
i agree that the stylus is the problem ...
Click to expand...
Click to collapse
Yeah, I'm using one from my old IPAQ !
ou guys use other styluses? I use my finger, thats what the Touch series should be made for I know it doesnt really work, the fonts are way too small...
Hicksville, I cannot judge what the other ppl say because I used the protector right away. Nothing ever touched my screen without the protector applied. But as I got it, the top film seems to be made of a softer material than the one of other WM devices. Reason for that is the reason for the "Touch" in the devices name: to make the touch layer register the actual point, where the finger tries to point at. If the top layer would be harder/stiffer it allegedly cant tell where exactly the finger tried to hit the screen because the area involved ('touched' eg. pressed down) would be bigger than with a soft top layer. Thats what I got and which makes some sense.
And logically a soft surface is more prone to be 'hurt' than a surface made of hard material. So I guess this might be connected. But I have to repeat, these are all assumptions by users and in no way official statements.
I've been using my phone w/o a screen protector, and I haven't gotten any scratches. Like schaggo I mainly use my finger. I did however test the screen by applying a lot of pressure with the stylus in a sweeping motion, and I didn't get any scratches (don't ask me what possessed me to try this). I later tried a much more conclusive scratch test on a CDMA Touch unit in a store on both the screen and the body and got no scratches! Yes, I applied a lot of pressure, (However, someone else had managed to put a scratch on the CDMA Touch's screen, but that scratch was really deep and probably done with a really sharp object; on the other hand, I did my testing with my TC stylus). I coudln't scratch both the body or the screen using a lot of pressure from my stylus and my nails. Maybe some of you exposed the TC to coins or keys inadvertantly?
That's pretty gutsy to test it on your own device. I am using the screen protector and I have a few scratches on that which is fine. When the time comes, I'll replace it with a new protector. As far as the rest of the case, I have been very careful so far with my device and haven't gotten any scratches anywhere on it. I think that suede/rubber whatever feel of the device is nice but I think it will scratch.
hambola said:
That's pretty gutsy to test it on your own device. I am using the screen protector and I have a few scratches on that which is fine. When the time comes, I'll replace it with a new protector. As far as the rest of the case, I have been very careful so far with my device and haven't gotten any scratches anywhere on it. I think that suede/rubber whatever feel of the device is nice but I think it will scratch.
Click to expand...
Click to collapse
Yes, very gutsy, I pushed hard enough to watch the screen sink it and rise back up very slowly...I don't know what I was thinking, but hey it turned out well w/o any scratches. The plastic on the screen is a lot stronger than your typical screen protector, so that fact along with my tests pretty much confirmed it for me. Furthermore, I don't like the look of screen protectors and I'm worried that they'll hinder touch flow.
As far as the casing, it seems bulletproof. But I'm like you, I keep it in the oem suede/microfiber case whenever its not being held to my ear for a phone call, and I've never put it in a pocket with anything else.
Actually with the suede comment I was talking about the body of the actual device. I'm not sure what that is but it has a nice texture to it. I haven't used that pouch that came in the package. Not a big fan of it. Head on over to the acc forum to see which cases people like. As far as the screen protector goes the original one does not hinder touch capabilities. Also in the acc forum they discuss different screen protectors, you might wanna check out one of those as well.
Came today from Play.
It is very odd has a cut out at top left (as if something underneath the glass requires a clear "signal") and a hole cut for the LED to shine through.
All in all a bit strange for £5 for 2.
Does it effect the screen quality in anyway? And does it help with fingerprints? I'm looking to get a new screen protector cos the one I got reduces screen quality by too much. (hint: avoid the forever fitters screen protectors!)
-------------------------------------
Sent from my HTC Desire
I just bought one recently and it's still shipping. Hope it won't reduce the screen sensitivity by too much. It's already perfect by default.
Sent from my HTC Desire
al89nut said:
Came today from Play.
It is very odd has a cut out at top left (as if something underneath the glass requires a clear "signal") and a hole cut for the LED to shine through.
All in all a bit strange for £5 for 2.
Click to expand...
Click to collapse
The proximity sensor and the ambient light sensor is to the left of the HTC logo.
Proximity sensor?
al89nut said:
Proximity sensor?
Click to expand...
Click to collapse
It's what turns the screen off when you hold the phone to your ear during a phone call, and what turns it back on when you bring the phone back down.
Take my advice. Do NOT buy this screen protector. I have just tried to fit two and failed both times. £5 vanished.
Why?
It is what I'd call a literal fit - in other words there is no margin between the protector and the actual screen. That makes it almost impossible to get right first time - and as you will know, with a screen protector, first time is best. The protector will almost certainly overlap the screen microscopically, riding up at the edge, leaving air pockets you won't be able to get out. Take if off to apply again and hello dust.
It also seems to be much more prone to bubbling than the non HTC one I'd put on before. Wish I'd left it on.
Am considering not bothering since I have an HTC case and it is glass not plastic.
But bloody annoying.
Has no one else noticed the little circle thing in the top left ish of the device??
First time i saw it i thought it was a camera but obviously isn't.
Then thought maybe it used for auto brightness or something like that?
its in the top left, in line with the htc logo, about a cm in from the left.
Have to have the screen off, and look very close.
Read the thread - proximity sensor apparently
al89nut said:
Take my advice. Do NOT buy this screen protector. I have just tried to fit two and failed both times. £5 vanished.
Why?
It is what I'd call a literal fit - in other words there is no margin between the protector and the actual screen. That makes it almost impossible to get right first time - and as you will know, with a screen protector, first time is best. The protector will almost certainly overlap the screen microscopically, riding up at the edge, leaving air pockets you won't be able to get out. Take if off to apply again and hello dust.
It also seems to be much more prone to bubbling than the non HTC one I'd put on before. Wish I'd left it on.
Am considering not bothering since I have an HTC case and it is glass not plastic.
But bloody annoying.
Click to expand...
Click to collapse
Exactly my experience too, I couldn't have put it better myself. Waited two months for this POS.
I think the only real solution is trim it on one side very slightly....
Just put mine on today too. Most unimpressed compared to the cheap pack of 6 from Germany. Fingerprint magnet and difficult to clean them off. I had to put the second one on straight away too, due to the fit, but considering putting one of the cheap ones back on!
AVOID.
Exactly so. That's what I've done
Whitestone Dome Tempered Glass Screen Protector Honest Review:
First off, let me start off by saying I do not like screen protectors at all. I took a chance on the WSD and here are my thoughts:
This is by far, the best looking screen protector I have ever used. The way that the Loca Glue dries means that you end up with a flawless fitment and finish. I have attached some photos showing how great it does look on the phone. Just make sure you let the screen protector "drop" when the Loca Glue is pooled up right in the center of the device. Too high or too low will result in a less than perfect installation.
The installation process could be a little more straightforward if I am being honest. I ruined the fist install but thankfully nailed the second attempt. The included hardware makes alignment fool-proof and I would suggest watching a couple of installation videos prior to attempting it yourself.
The screen feels as good, if not even a little better with the WSD on the phone. It feels like the oleophobic coating is less resistant to fingers gliding across the display.
The level of protection that tempered glass screen protectors appears to be very real. Thankfully I have not gotten a chance to test this myself.
Overall, I would say without hesitation that this the best screen protector money can buy. I have one con that is very device specific. On the Galaxy S10, the sensitivity of the in-display fingerprint reader suffers drastically with the screen protector installed. After the initial updates I got on my S10, the fingerprint reader has been great. Once I got used to the placement and necessary pressure, I stopped getting error messages saying "no match". Once I installed the WSD, I re-scanned my fingerprints. I turned on the display sensitivity setting and I followed a couple of YouTube videos to get the fingerprint reader to work well. Out of every ten attempts, I usually get a "no match" error half the time. It is rather unpleasant.
Ultimately, I ended up taking the WSD off of my phone. I have since ordered one for my iPhone XS and one for my wifes XR. I think that WSD is absolutely fantastic but the fingerprint scanner tech in the S10 is in it's infancy and the WSD just seems to interfere just enough to cause problems. YMMV but I did try a number of different suggested "fixes" before finally throwing in the towel and taking it off.
TL;DR Whitestone Dome is an instabuy for me for every phone except the S10. If the fingerprint reader is a priority for you and is your preferred biometric security measure, I would say pass for now. Who knows, maybe Samsung will further improve the sensitivity to make the WSD work better than it's current state. I feel like WSD did the best they could with what they were working with. If you use the face scanner, a pin/password or something else besides the fingerprint reader, you will love the WSD.
I hope this review is helpful for any of you trying to make an educated buying decision.
https://photos.app.goo.gl/E5zwP4zVzM8L7Gno8
I have ordered WSD from two different sellers and they all not working to a certain extent, even with replacement they sent me, so I have installed this glass on my phone 5 times. Aside from the glass feels amazing, the fingerprint scanner would not work more than half the time, this is a deal breaker to me, I haven't got time to tinker with the way my finger sits on the scanner and how hard I need to press to make it work, every time. I have finally given up on this, until something better can be done about it.
S10 here, just sharing my experience as its still fresh:
I just took it off after 4 days. Everything went well in the application process and I pressed in the fingerprint reader (did the new fingerprints etc.). The thing is it worked OK in super good conditions - although it definitely took longer.
BUT when the hands were a bit more dry (morning for example) or a bit wet(geting out of shower) I consistently got to the point where it would fail enough times to disable the fingerprint reading. I tried redoing the fingerprints again after few days but didn't help.
So basically - it works but with a huge asterisk. Basically you go one notch down. In perfect conditions fingerprint reader without protector will work lightning fast and with protector it will work slower and you will be always required to press a bit harder to get it to detect your fingerprint.
In non-perfect conditions you will get a slower response even without the protector, but with WSD it will fail too many times for my liking to make it useable. On the other hand, the installation seems a bit complicated but with help of yt video its totally easy - and its really one nice protector - when its on, you really think its actual screen on touch.
Can anyone recommend a third party screen protector that actually works ?
Samsung says you shouldn't remove the OEM screen protector... but is it okay to do so?
If you ask me... I would recommend not to remove the OEM screen protector at the same time don't use any 3rd party screen protector too...
Clusco said:
If you ask me... I would recommend not to remove the OEM screen protector at the same time don't use any 3rd party screen protector too...
Click to expand...
Click to collapse
Why? Have you removed it? Any experience with other screen protectors?
I use the Skinomi screen protector on mine, been using them since my Pixel 2 XL. The Samsung one is a flimsy piece of hard plastic that loves finger prints. So glad I took the "risk"
You can find a number of videos where people apply their own. Definitely recommend, but it is scary while you're doing it
My tip after applying it: Keep the phone unfolded overnight!
buru898 said:
I use the Skinomi screen protector on mine, been using them since my Pixel 2 XL. The Samsung one is a flimsy piece of hard plastic that loves finger prints. So glad I took the "risk"
You can find a number of videos where people apply their own. Definitely recommend, but it is scary while you're doing it
My tip after applying it: Keep the phone unfolded overnight!
Click to expand...
Click to collapse
Hi!
How long have you had the Skinomi protector on? Any problems? Does it feel as smooth as the stock protector? Does it cover the whole screen? Stock protector has small gaps all around the screen.
Some questions...
BWA80 said:
Hi!
How long have you had the Skinomi protector on? Any problems? Does it feel as smooth as the stock protector? Does it cover the whole screen? Stock protector has small gaps all around the screen.
Some questions...
Click to expand...
Click to collapse
It feels so much better. I've had it on for about 3 months now. Keep in mind I never liked glass screen protectors. The 'rubbery' ones that require water feels better, and makes sense for a phone where you're not likely to drop it on the screen
No problems, just remember not to fold the phone for at least the day afterwards (I have a very small bubble there due to my impatience). Plus, the rubbery ones self heal so it always looks great. The fact that it never shows fingerprints too. No more constantly wiping the phone after every use
Yes I know exactly the issue with crap getting along the sides. So infuriating, but this one reaches the corners well. I also put the protector touching the very top of the phone as well to eliminate the top gaps so the only real gap is the very bottom, and that isn't touched as often as every other part of the phone. I also don't remember the last time I needed to clean it
In the picture, ignore the bottom gap gunk. It looks way worse on camera for some reason
Let me know if you want any more pictures/angles
buru898 said:
It feels so much better. I've had it on for about 3 months now. Keep in mind I never liked glass screen protectors. The 'rubbery' ones that require water feels better, and makes sense for a phone where you're not likely to drop it on the screen
No problems, just remember not to fold the phone for at least the day afterwards (I have a very small bubble there due to my impatience). Plus, the rubbery ones self heal so it always looks great. The fact that it never shows fingerprints too. No more constantly wiping the phone after every use
Yes I know exactly the issue with crap getting along the sides. So infuriating, but this one reaches the corners well. I also put the protector touching the very top of the phone as well to eliminate the top gaps so the only real gap is the very bottom, and that isn't touched as often as every other part of the phone. I also don't remember the last time I needed to clean it
In the picture, ignore the bottom gap gunk. It looks way worse on camera for some reason
Let me know if you want any more pictures/angles
Click to expand...
Click to collapse
When installing the Skinomi, what's the best way to deal with the hinge dip when "squeegeeing" the protector to the screen?
Just ordered the Skinomi.
I almost got T-Mobile to exchange the whole phone. They finally asked me when I bought it and determined it was still under Samsung warranty and directed me to Samsung.
Once again, Samsung sent me on a wild goose chase to Best Buy and the Samsung Experience section which, no longer exists at the 2 Best Buy's I tried.
Dismal support from Samsung!
mmeyer4663 said:
When installing the Skinomi, what's the best way to deal with the hinge dip when "squeegeeing" the protector to the screen?
Just ordered the Skinomi.
I almost got T-Mobile to exchange the whole phone. They finally asked me when I bought it and determined it was still under Samsung warranty and directed me to Samsung.
Once again, Samsung sent me on a wild goose chase to Best Buy and the Samsung Experience section which, no longer exists at the 2 Best Buy's I tried.
Dismal support from Samsung!
Click to expand...
Click to collapse
Nice, that's the one I'm using
I think I first tried squeezing from middle outwards, but the phone did fine doing it normally (from top to bottom or vice versa). I was only worried about water getting into the hinges, but apparently these phones do well with water according to YouTube durability tests
I hear a lot of people with the same experience for the lack of Samsung support. It's a shame
Have you all read this yet:
Samsung Galaxy Z Flip 3 durability tested — read this before you buy
The Galaxy Z Flip 3 is more durable, but the foldable display itself is still fragile
www.tomsguide.com
After reading that and watching the YouTube to replace the screen protector, seems pretty scary to replace the screen protector.
The best screen protector secured at last!
After many months of scouring the internet and more money spent than I'd like to admit, I have finally found what I would consider a better screen protector than even the OEM installed one from Samsung. I have tried close to 10 different...
forum.xda-developers.com
I just made a thread about this and I'm absolutely positive I found the best screen protector by a longshot. It's also a very straightforward install, I got a perfect install my first try.
Has anyone else had a problem with using the sensor after applying the Whitestone glass screen protector? Is there a way to install it to make this better?
You should reregister your fingerprints after installing any screen protector. + you can turn on touch sensivity. (under display settings)
I noticed after going from my Spigen screen protector (had a glass feel but is a soft film) to the Whitestone Dome Glass on my S22 Ultra, I definitely have to press down harder (pretty firmly and no real wiggling of the thumb seems to work best) and use more full on thumb to get it to register properly. It takes ever so slightly longer to register and unlock for me than compared to the Spigen protector, but I do like the Whitestone Dome Glass more overall.
Putting on the WSD had no impact at all on my FP sensor. It was a bit finicky before and exactly the same after. I had found before I put the WSD on that it is 100% perfect every time if I moisten my thumb. Same after the WSD. With a dry thumb, most times it gives me the message "Cover the entire sensor" or "Press harder".
Things I did to help avoid any further degradation after install. During installation, pressed on the sensor area for about 30 seconds after the first cure and just before 2nd cure. Re-register prints after the WSD install. Set touch sensitivity on. Registered my thumb twice. After the install the FPS was exactly the same as before the install so no impact I can see. It is just that this FPS does not like dry prints. Moisten and many people find it works perfectly. I have found that I don't actually have to wet or lick my thumb, just breathing on it once is enough.
Because I generally use face ID to unlock, the FP is not a big deal to me. When I use an app like banking or Google Pay that require FP unlock, I do the breath on the thumb first and it usually works immediately.
4 - Fix Fingerprint ExperienceGo to Settings, Biometrics and security, more biometrics settings:
- Turn off "Show unlock transition effect"
Go to Settings, Biometrics and security, fingerprints:
- Turn on "Fingerprint always on"
- Turn off "Show animation when unlocking"
- Set battery usage to "Unrestricted" for "com.samsung.android.biometrics.app.setting".
- Disable app optimizations for "com.samsung.android.biometrics.app.setting".
Do OtterBox cases and defender cases work well with this screen protector?
Want to know before I buy the device. Thanks
this.guy.lol said:
Do OtterBox cases and defender cases work well with this screen protector?
Want to know before I buy the device. Thanks
Click to expand...
Click to collapse
I'm using an Otterbox case with Gadgetshieldz screen guard and it fits perfectly because I got the case fit protector!
revned911 said:
Has anyone else had a problem with using the sensor after applying the Whitestone glass screen protector? Is there a way to install it to make this better?
Click to expand...
Click to collapse
Next to redoing the scanning of the prints, I find that having to dry skin affects it often. See if handcream or just moisten the finger a very little helps.
Mario919 said:
Next to redoing the scanning of the prints, I find that having to dry skin affects it often. See if handcream or just moisten the finger a very little helps.
Click to expand...
Click to collapse
Yes, as has been described before, I find just breathing on my thumb is enough to make it work perfectly every time.
A tip I learned a while ago was when I first cure using the uv light and remove it from the jig is to gently press down where the fingerprint scanner is before 2nd curing which in my experience certainly helps.
iam using ARMOR SUIT screen protector, work just fine
https://www.amazon.com/dp/B09RZMCLWP?psc=1
BandOfBrothers1 said:
A tip I learned a while ago was when I first cure using the uv light and remove it from the jig is to gently press down where the fingerprint scanner is before 2nd curing which in my experience certainly helps.
Click to expand...
Click to collapse
My first install was a complete dud as the fingerprint scanner didn't work at all, even after registering. I tried pressing down on the scanner on my 2nd install and while it worked better, it still only worked about 30% of the time after registering my prints again.
Unfortunately I'm sending my protectors back to Amazon for a refund as neither install method worked for me.
I guess the powers that be at Android are catching on to this. I just got an unsolicited system message with a few suggestions to make the fingerprint sensor work better. The last one on the list was to "try moisturizing" your fingertip. lol! Guess there is not a software fix for this coming anytime soon.
Hi guys, my film is slightly chipped on one side, it doesn't bother using it, do I still have to replace it with another one or do I leave it like this?
visually it doesn't bother me but it worries me about protection if I accidentally take a hit.
babak said:
Hi guys, my film is slightly chipped on one side, it doesn't bother using it, do I still have to replace it with another one or do I leave it like this?
visually it doesn't bother me but it worries me about protection if I accidentally take a hit.
Click to expand...
Click to collapse
I personally, can not withstand chipped or cracked screen protectors, as soon as a crack or dent appears, I take the protector off, as it has already worked by absorbing the damage, but that is my opinion…
winoles said:
I personally, can not withstand chipped or cracked screen protectors, as soon as a crack or dent appears, I take the protector off, as it has already worked by absorbing the damage, but that is my opinion…
Click to expand...
Click to collapse
Yes, I have already replaced it, let's hope not to spoil this too, I need a better case but impossible to find what I want.