Hello Guys,
After flashing few pie roms and few GSI I faced really big trouble. When we flash rom we must install erecovery and factory format data. After doing this we loose everything on our internal memory. And this is very headaches. :silly:
So I search many times " How to flash pie roms without wiping internal storage" Finally I figure out a method. Some times you know about this, Some times you don't know about this. Pls let me guide.
• I do not responsible for bricked devices, dead SD cards
We call this "Universal DM-Verity, ForceEncrypt, Disk Quota Disablers"
Link here - https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389/amp/
Introduction....
• If you're currently encrypted: BACKUP YOUR INTERNAL STORAGE TO YOUR PC.
1- Download zip file
2- Reboot to recovery, Then format data.
4- Reboot back into recovery
5- After doing that or if you're not encrypt anymore
6- Make a backup using TWRP ( Ramdisk,Vendor)
7- Wipe required partitions(If you want)
8- Flash your rom, custom kernel (if applicable), then this zip, the magisk/supersu/other root, then Gapps
9- Most important part after flashing rom, You must factory reset using twrp. (TWRP -> Wipe -> slide Left to Right)
• This zip should be flashed after anything that modifies your boot img (like a custom kernel) but before magisk/supersu since this zip creates the files that tells magisk/supersu to not encrypt.
Congratulations now you don't need bootloader for flash roms... :laugh: Feel Free
Credits - @Zackptg5
Related
UltimAOSP
If you choose to use these, you are doing that on your own risk, and I can not be held responsible for any damage you made to your phone.
UltimAOSP is a port rom from H9001
INSTALL INSTRUCTION:
To flash a new ROM properly, you need a custom recovery (CWM for example)
1. Reboot to recovery.
2. Do a nandroid backup or backup in cwm.
3. mount USB Mass Storage and delete from sdcard these three directories:
.android_secure
Android
LOSTDIR4. Copy ROM zip or zips on sdcard
5. Eject mass storage from computer and then unmount in recovery
6. wipe all/factory reset or pre-flash wipe in recovery
7. wipe or erase dalvik cache
8. flash zip from sdcard, choose ROM zip, flash it and reboot.
That's all, this is the correct way to flash any new ROM in any phone thru recovery.
Click to expand...
Click to collapse
Rooted : Yes
Languages : All
reserved
Mirror Links
* UltimAOSP v1.1.0
Thank you for this rom :good:
I will try it. Are there gapps?
Think about posting it to needrom.com
I install ResurrectionRemix M v5.7.2 and gapps 6.0 to my phone through TWRP. it was good. But later i decided to install AospExtended-v3.1 . I took the zip file into my USB Removable disk as my phone didn't have any external storage so that i could install it with the help of OTG cable!
I install AospExtended-v3.1 and gapps 7.1 successfully from TWRP recovery . when it is 'done' i tapped on 'Reboot to system'. I don't know why, my phone goes into bootloop though i installed various ROMS in this process but i wasn't face this problem before!
Anyway then i wiped all data and decided to go back to my previous ROM. I Installed ResurrectionRemix M v5.7.2 through TWRP. it was installed successfully and i thought now that looping problem will resolve, but after successful completion of installing ResurrectionRemix M v5.7.2 when i reboot to system there still the bootloop problem!
Then i though i should go back to my STOCK ROM. I download MIUI 6.7.5_5.0_global fastboot ROM and using miflash tool with proper ADB drivers installed i flash my phone. It was again completed successfully, then i thought this time the bootloop problem will resolve! But no! My phone still stuck into bootloop.
whatever installing process(TWRP/Fastboot) i followed, i am unable to solve this Strange bootloop issue! What should I do?
i am also facing this problem,wht i do i cant understand,pls anyone hlp me to take out from this situation
Try these.
1. Boot into twrp
2. Wipe System, Data, dalvik, cache ( Don't wipe system storage )
3. Connect USB disk
4. Copy desired ROM into internal storage using the file manager given in TWRP.
5. Flash ROM locating the zip in internal storage.
6. Wipe Cache/Dalvik.
Your phone should now boot successfully.
madhurajkumar said:
Try these.
1. Boot into twrp
2. Wipe System, Data, dalvik, cache ( Don't wipe system storage )
3. Connect USB disk
4. Copy desired ROM into internal storage using the file manager given in TWRP.
5. Flash ROM locating the zip in internal storage.
6. Wipe Cache/Dalvik.
Your phone should now boot successfully.
Click to expand...
Click to collapse
I tried this process, but this doesn't work!
try returning to stock MIUI
follow this thread
https://forum.xda-developers.com/mi-4i/help/solved-mi4i-continuous-reboot-issue-t3537896
Hello. I've got my oneplus 6 with twrp, magisk, and custom kernel. I am currently on partition B. When i change partition to A on twrp and reboot, my Phone is bootlooping few Times until it changes back to partition B.
My thoughts are that i screwed something in the process of instalation and i don't understand fully the idea and workings of the A/B partition. So i have got a question.
When i want to install update and i want to retain root and kernel and twrp, i Will do:
1.Download full 1gb+ update from xda when it Will be available
2.Reboot into twrp (it Will be on slot B, where i have my system now)
3.Flash rom(it Will flash on A probably? But i Will still be on B for now until next reboot? )
4.Flash twrp as it flashes on both partitions
5.Reboot to recovery (Will be on A partition now?)
6.Flash magisk(it flashes on A?)
7.Flash kernel(it flashes on A?)
8.Reboot to system (i am on A with my updated system now, my bootloop is fixed and there is old, working version of system on partition B?)
9.Repeat the process when new updates are available.
primus19 said:
Hello. I've got my oneplus 6 with twrp, magisk, and custom kernel. I am currently on partition B. When i change partition to A on twrp and reboot, my Phone is bootlooping few Times until it changes back to partition B.
My thoughts are that i screwed something in the process of instalation and i don't understand fully the idea and workings of the A/B partition. So i have got a question.
When i want to install update and i want to retain root and kernel and twrp, i Will do:
1.Download full 1gb+ update from xda when it Will be available
2.Reboot into twrp (it Will be on slot B, where i have my system now)
3.Flash rom(it Will flash on A probably? But i Will still be on B for now until next reboot? )
4.Flash twrp as it flashes on both partitions
5.Reboot to recovery (Will be on A partition now?)
6.Flash magisk(it flashes on A?)
7.Flash kernel(it flashes on A?)
8.Reboot to system (i am on A with my updated system now, my bootloop is fixed and there is old, working version of system on partition B?)
9.Repeat the process when new updates are available.
Click to expand...
Click to collapse
When you flash system partition contained in the zip, recovery change slot.. so:
1) in TWRP flash update zip, it will be flashed in the unused slot (so if you're on A it goes on B and vice versa
2) flash TWRP zip (this is because in full zip you're going to flash even the original boot IMG so you'll lose TWRP if you don't reflash it instantly after the update
3) reboot to recovery, the system will now change partition A to B or B to A obviously depend on what partition you are
4) now you can flash magisk and kernel and whatever you want
5) reboot to system and enjoy
Sent from my OnePlus6 using XDA Labs
Hitman478™ said:
When you flash system partition contained in the zip, recovery change slot.. so:
1) in TWRP flash update zip, it will be flashed in the unused slot (so if you're on A it goes on B and vice versa
2) flash TWRP zip (this is because in full zip you're going to flash even the original boot IMG so you'll lose TWRP if you don't reflash it instantly after the update
3) reboot to recovery, the system will now change partition A to B or B to A obviously depend on what partition you are
4) now you can flash magisk and kernel and whatever you want
5) reboot to system and enjoy
Sent from my OnePlus6 using XDA Labs
Click to expand...
Click to collapse
Exactly what i wanted to know. Thanks for clarifying that, i forgot to reboot to recovery after flashing it, so it didn't change slot. Now i will remember. Cheers!
Thread can be closed
Please follow the Steps Correctly..
Use this Twrp ( SD card access enabled thanks to CosmicDan):
http://www.mediafire.com/file/cbiy2084dylmb1h/twrp-3.2.3.0-beryllium-20180831_microSD.img.7z/file
For New Recovery Rom Flashing...
1.Flash Fastboot recovery , Go to recovery ( Volume+ Power)
2.From Twrp Reboot into Recovery
3.Format data
4.Reboot to recovery
5.Wipe everything
(If you are not to access the internal storage even, then check if you have mounted the all the partitions in twrp.)
6.Flash the Rom + FE Disabler(Must)
7.Magisk (Optional)
.
Done
Reboot into system
Kindly check ... During 1st boot there is encryption or not...if it occurs ..u have do again these steps correctly
If Encryption is not there in First Boot ...U are done ....
Future Rom installation will be very easy
1.Juat boot into recovery
2.No need to backup restore wipe anything
3.From Twrp reboot into recovery
4.Flash the Rom - FE Disabler - Magisk(Optional)
Done
Reboot to System
Enjoy
Yuvi8870 said:
I don't know, These are 100% Correct...But it works for me..
Unless Otherwise U know perfectly..Please follow the Steps Correctly..
For New Recovery Rom Flashing...
1.Flash Fastboot recovery , Go to recovery ( Volume+ Power)
2.From Twrp Reboot into Recovery
3.Format data
4.Install FE Disabler ( If u can't access internal storage...do this step after reboot to recovery)
5.Reboot to recovery
6.Wipe everything
7.Flash the Rom + FE Disabler
8.Format data
9.Reboot to recovery
10.Again Flash FE Disabler + Magisk (Optional)
11.Install Recovery image file through Twrp ( Install -Select image - recovery -flash)
Done
Reboot into system
Kindly check ... During 1st boot there is encryption or not...if it occurs ..u have do again these steps correctly
If Encryption is not there in First Boot ...U have done ....
Future Rom installation very easy
1.Juat boot into recovery
2.No need to backup restore wipe anything
3.From Twrp reboot into recovery
4.Flash the Rom - FE Disabler - Magisk(Optional) + Recovery image
Done
Reboot to System
If anyone knows which Steps are unnecessary ... Kindly Reply here ...
Click to expand...
Click to collapse
do i need FE disabler if I want to go to global beta from global stable?
Fahim Ferdoush said:
do i need FE disabler if I want to go to global beta from global stable?
Click to expand...
Click to collapse
It doesn't matter... Whether it is beta or Stable..... If U want to access internal storage again via twrp( For again flash Rom in future without format internal storage) ...U definitely flash FE Disabler
Yuvi8870 said:
I don't know, These are 100% Correct...But it works for me..
Unless Otherwise U know perfectly..Please follow the Steps Correctly..
For New Recovery Rom Flashing...
1.Flash Fastboot recovery , Go to recovery ( Volume+ Power)
2.From Twrp Reboot into Recovery
3.Format data
4.Reboot to recovery
5.Wipe everything
(If you are not to access the internal storage even, then check if you have mounted the all the partitions in twrp.)
6.Install FE Disabler
7.Flash the Rom + FE Disabler
[[[[[8.Format data
9.Reboot to recovery
10.Again Flash FE Disabler + Magisk (Optional)]]]] Optional ... Safety Purpose
Done
Reboot into system
Kindly check ... During 1st boot there is encryption or not...if it occurs ..u have do again these steps correctly
If Encryption is not there in First Boot ...U have done ....
Future Rom installation very easy
1.Juat boot into recovery
2.No need to backup restore wipe anything
3.From Twrp reboot into recovery
4.Flash the Rom - FE Disabler - Magisk(Optional) + Recovery image
Done
Reboot to System
If anyone knows which Steps are unnecessary ... Kindly Reply here ...
Click to expand...
Click to collapse
Hi Sir,
i was in Stock miui9+unlocked bootloader+TWRP
I tried to follow these steps, but at some point i could no longer access the internal files, after doing step 9, was unable to see FE Disabler file.
Installed the miui 10, During 1st boot encryption appeared, i lost TWRP
What should i do from here? Can i install TWRP by fastboot again normaly, it will restore well to the miui10 beta that is in my system.
PS: I thing i made a mistake here, because e mark some boxs : (If you are not to access the internal storage even, then check if you have mounted the all the partitions in twrp.)
Thanks!
I think step no 6 can be skip
jimdorky said:
I think step no 6 can be skip
Click to expand...
Click to collapse
Safety Purposes ?
pack21 said:
Hi Sir,
i was in Stock miui9+unlocked bootloader+TWRP
I tried to follow these steps, but at some point i could no longer access the internal files, after doing step 9, was unable to see FE Disabler file.
Installed the miui 10, During 1st boot encryption appeared, i lost TWRP
What should i do from here? Can i install TWRP by fastboot again normaly, it will restore well to the miui10 beta that is in my system.
PS: I thing i made a mistake here, because e mark some boxs : (If you are not to access the internal storage even, then check if you have mounted the all the partitions in twrp.)
Thanks!
Click to expand...
Click to collapse
1st mount the first four boxes(Cache, System, Vendor,Data) in the mount screen
Whenever no access on internal...it means either u have nothing in internal or Permission not granted ...For nothing means u have to copy again... Permission issue means u have to reboot to recovery
(((Whenever u wipe everything (Include internal) or Format data ...it delete all files in internal ....So u have to connect the phone (From Twrp Screen) with Computer... again Copy those files to internal....and flash ...Bcz this Twrp can't read ur External Memory card ...so u have to copy those files again to internal... These steps only need during first installation..)))
New Twrp- enabled SD card access: (U can flash from SD card) http://www.mediafire.com/file/cbiy2084dylmb1h/twrp-3.2.3.0-beryllium-20180831_microSD.img.7z/file
If Force encryption appears on first boot ....U have to flash .. again from first ..... Otherwise Twrp is removed automatically ...and future Rom installation will be not easy..Bcz Internal ll be encrypted..so u can't access until u format it .... U have to do these 10 steps again in future ...If u done correctly these 10 now... future installation will be easy
Hey guys,
General custom Rom question. Each time I install any custom, following the directions 100% it will never install properly. No matter what when I reboot back into TWRP it doesn't mount data.
Here's some instructions for an example from the latest one I tried Havok.
What am I doing wrong?
How to install
+ if you are coming from OOS then you will need to wipe your data as well as internal storage due to encrypted data but if you had any custom ROM before then just wipe data. No need to wipe internal storage.
for updating
1: Flash ROM
2: Flash TWRP installer
3: reboot again to recovery to boot from second slot.
4: Flash Gapps
5: Flash magisk
6: wipe dalvik cache and reboot to system.
That's all.
use tool all in one to decrypt internal storage