Please follow the Steps Correctly..
Use this Twrp ( SD card access enabled thanks to CosmicDan):
http://www.mediafire.com/file/cbiy2084dylmb1h/twrp-3.2.3.0-beryllium-20180831_microSD.img.7z/file
For New Recovery Rom Flashing...
1.Flash Fastboot recovery , Go to recovery ( Volume+ Power)
2.From Twrp Reboot into Recovery
3.Format data
4.Reboot to recovery
5.Wipe everything
(If you are not to access the internal storage even, then check if you have mounted the all the partitions in twrp.)
6.Flash the Rom + FE Disabler(Must)
7.Magisk (Optional)
.
Done
Reboot into system
Kindly check ... During 1st boot there is encryption or not...if it occurs ..u have do again these steps correctly
If Encryption is not there in First Boot ...U are done ....
Future Rom installation will be very easy
1.Juat boot into recovery
2.No need to backup restore wipe anything
3.From Twrp reboot into recovery
4.Flash the Rom - FE Disabler - Magisk(Optional)
Done
Reboot to System
Enjoy
Yuvi8870 said:
I don't know, These are 100% Correct...But it works for me..
Unless Otherwise U know perfectly..Please follow the Steps Correctly..
For New Recovery Rom Flashing...
1.Flash Fastboot recovery , Go to recovery ( Volume+ Power)
2.From Twrp Reboot into Recovery
3.Format data
4.Install FE Disabler ( If u can't access internal storage...do this step after reboot to recovery)
5.Reboot to recovery
6.Wipe everything
7.Flash the Rom + FE Disabler
8.Format data
9.Reboot to recovery
10.Again Flash FE Disabler + Magisk (Optional)
11.Install Recovery image file through Twrp ( Install -Select image - recovery -flash)
Done
Reboot into system
Kindly check ... During 1st boot there is encryption or not...if it occurs ..u have do again these steps correctly
If Encryption is not there in First Boot ...U have done ....
Future Rom installation very easy
1.Juat boot into recovery
2.No need to backup restore wipe anything
3.From Twrp reboot into recovery
4.Flash the Rom - FE Disabler - Magisk(Optional) + Recovery image
Done
Reboot to System
If anyone knows which Steps are unnecessary ... Kindly Reply here ...
Click to expand...
Click to collapse
do i need FE disabler if I want to go to global beta from global stable?
Fahim Ferdoush said:
do i need FE disabler if I want to go to global beta from global stable?
Click to expand...
Click to collapse
It doesn't matter... Whether it is beta or Stable..... If U want to access internal storage again via twrp( For again flash Rom in future without format internal storage) ...U definitely flash FE Disabler
Yuvi8870 said:
I don't know, These are 100% Correct...But it works for me..
Unless Otherwise U know perfectly..Please follow the Steps Correctly..
For New Recovery Rom Flashing...
1.Flash Fastboot recovery , Go to recovery ( Volume+ Power)
2.From Twrp Reboot into Recovery
3.Format data
4.Reboot to recovery
5.Wipe everything
(If you are not to access the internal storage even, then check if you have mounted the all the partitions in twrp.)
6.Install FE Disabler
7.Flash the Rom + FE Disabler
[[[[[8.Format data
9.Reboot to recovery
10.Again Flash FE Disabler + Magisk (Optional)]]]] Optional ... Safety Purpose
Done
Reboot into system
Kindly check ... During 1st boot there is encryption or not...if it occurs ..u have do again these steps correctly
If Encryption is not there in First Boot ...U have done ....
Future Rom installation very easy
1.Juat boot into recovery
2.No need to backup restore wipe anything
3.From Twrp reboot into recovery
4.Flash the Rom - FE Disabler - Magisk(Optional) + Recovery image
Done
Reboot to System
If anyone knows which Steps are unnecessary ... Kindly Reply here ...
Click to expand...
Click to collapse
Hi Sir,
i was in Stock miui9+unlocked bootloader+TWRP
I tried to follow these steps, but at some point i could no longer access the internal files, after doing step 9, was unable to see FE Disabler file.
Installed the miui 10, During 1st boot encryption appeared, i lost TWRP
What should i do from here? Can i install TWRP by fastboot again normaly, it will restore well to the miui10 beta that is in my system.
PS: I thing i made a mistake here, because e mark some boxs : (If you are not to access the internal storage even, then check if you have mounted the all the partitions in twrp.)
Thanks!
I think step no 6 can be skip
jimdorky said:
I think step no 6 can be skip
Click to expand...
Click to collapse
Safety Purposes ?
pack21 said:
Hi Sir,
i was in Stock miui9+unlocked bootloader+TWRP
I tried to follow these steps, but at some point i could no longer access the internal files, after doing step 9, was unable to see FE Disabler file.
Installed the miui 10, During 1st boot encryption appeared, i lost TWRP
What should i do from here? Can i install TWRP by fastboot again normaly, it will restore well to the miui10 beta that is in my system.
PS: I thing i made a mistake here, because e mark some boxs : (If you are not to access the internal storage even, then check if you have mounted the all the partitions in twrp.)
Thanks!
Click to expand...
Click to collapse
1st mount the first four boxes(Cache, System, Vendor,Data) in the mount screen
Whenever no access on internal...it means either u have nothing in internal or Permission not granted ...For nothing means u have to copy again... Permission issue means u have to reboot to recovery
(((Whenever u wipe everything (Include internal) or Format data ...it delete all files in internal ....So u have to connect the phone (From Twrp Screen) with Computer... again Copy those files to internal....and flash ...Bcz this Twrp can't read ur External Memory card ...so u have to copy those files again to internal... These steps only need during first installation..)))
New Twrp- enabled SD card access: (U can flash from SD card) http://www.mediafire.com/file/cbiy2084dylmb1h/twrp-3.2.3.0-beryllium-20180831_microSD.img.7z/file
If Force encryption appears on first boot ....U have to flash .. again from first ..... Otherwise Twrp is removed automatically ...and future Rom installation will be not easy..Bcz Internal ll be encrypted..so u can't access until u format it .... U have to do these 10 steps again in future ...If u done correctly these 10 now... future installation will be easy
Related
Hi. When i install it and reboot phone i saw only htc logo (not boot animation). So how install it?
michal16 said:
Hi. When i install it and reboot phone i saw only htc logo (not boot animation). So how install it?
Click to expand...
Click to collapse
First, reboot into recovery.
2) Wipedata/factory reset
3) Mount everything
4) Wipe everything except SD-Card
5) (If in CWM recovery, go in advanced and here Wipe Dalvik cache)
6) Install the ROM
7) Advanced - Fix permissions
If still not working, try this: http://forum.xda-developers.com/showthread.php?t=2389445 I wasn't able to boot any single ROM based on HTC Sense, but when I've tried this, it worked for me
Hope I helped
So i have to use cwm?
I have to format SD card?
I try 2nd method
michal16 said:
So i have to use cwm?
I have to format SD card?
I try 2nd method
Click to expand...
Click to collapse
No, you can choose But when you have CWM, the Dalvik chache option is in Andvanced. In TWRP recovery it's in the wipe option
You don't have to format SD-Card (Only if you want to have increased internal memory, then do a second partition (ext4) and then use the app mount2sd)
When you want to use the file in the link, follow the instructions in the guide from the link and then do the steps I mentioned
I dont have burned nand
I doing it and nothing. This is why i asking.
i have 2 partitions
I install ResurrectionRemix M v5.7.2 and gapps 6.0 to my phone through TWRP. it was good. But later i decided to install AospExtended-v3.1 . I took the zip file into my USB Removable disk as my phone didn't have any external storage so that i could install it with the help of OTG cable!
I install AospExtended-v3.1 and gapps 7.1 successfully from TWRP recovery . when it is 'done' i tapped on 'Reboot to system'. I don't know why, my phone goes into bootloop though i installed various ROMS in this process but i wasn't face this problem before!
Anyway then i wiped all data and decided to go back to my previous ROM. I Installed ResurrectionRemix M v5.7.2 through TWRP. it was installed successfully and i thought now that looping problem will resolve, but after successful completion of installing ResurrectionRemix M v5.7.2 when i reboot to system there still the bootloop problem!
Then i though i should go back to my STOCK ROM. I download MIUI 6.7.5_5.0_global fastboot ROM and using miflash tool with proper ADB drivers installed i flash my phone. It was again completed successfully, then i thought this time the bootloop problem will resolve! But no! My phone still stuck into bootloop.
whatever installing process(TWRP/Fastboot) i followed, i am unable to solve this Strange bootloop issue! What should I do?
i am also facing this problem,wht i do i cant understand,pls anyone hlp me to take out from this situation
Try these.
1. Boot into twrp
2. Wipe System, Data, dalvik, cache ( Don't wipe system storage )
3. Connect USB disk
4. Copy desired ROM into internal storage using the file manager given in TWRP.
5. Flash ROM locating the zip in internal storage.
6. Wipe Cache/Dalvik.
Your phone should now boot successfully.
madhurajkumar said:
Try these.
1. Boot into twrp
2. Wipe System, Data, dalvik, cache ( Don't wipe system storage )
3. Connect USB disk
4. Copy desired ROM into internal storage using the file manager given in TWRP.
5. Flash ROM locating the zip in internal storage.
6. Wipe Cache/Dalvik.
Your phone should now boot successfully.
Click to expand...
Click to collapse
I tried this process, but this doesn't work!
try returning to stock MIUI
follow this thread
https://forum.xda-developers.com/mi-4i/help/solved-mi4i-continuous-reboot-issue-t3537896
Hello Guys,
After flashing few pie roms and few GSI I faced really big trouble. When we flash rom we must install erecovery and factory format data. After doing this we loose everything on our internal memory. And this is very headaches. :silly:
So I search many times " How to flash pie roms without wiping internal storage" Finally I figure out a method. Some times you know about this, Some times you don't know about this. Pls let me guide.
• I do not responsible for bricked devices, dead SD cards
We call this "Universal DM-Verity, ForceEncrypt, Disk Quota Disablers"
Link here - https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389/amp/
Introduction....
• If you're currently encrypted: BACKUP YOUR INTERNAL STORAGE TO YOUR PC.
1- Download zip file
2- Reboot to recovery, Then format data.
4- Reboot back into recovery
5- After doing that or if you're not encrypt anymore
6- Make a backup using TWRP ( Ramdisk,Vendor)
7- Wipe required partitions(If you want)
8- Flash your rom, custom kernel (if applicable), then this zip, the magisk/supersu/other root, then Gapps
9- Most important part after flashing rom, You must factory reset using twrp. (TWRP -> Wipe -> slide Left to Right)
• This zip should be flashed after anything that modifies your boot img (like a custom kernel) but before magisk/supersu since this zip creates the files that tells magisk/supersu to not encrypt.
Congratulations now you don't need bootloader for flash roms... :laugh: Feel Free
Credits - @Zackptg5
Hey guys,
General custom Rom question. Each time I install any custom, following the directions 100% it will never install properly. No matter what when I reboot back into TWRP it doesn't mount data.
Here's some instructions for an example from the latest one I tried Havok.
What am I doing wrong?
How to install
+ if you are coming from OOS then you will need to wipe your data as well as internal storage due to encrypted data but if you had any custom ROM before then just wipe data. No need to wipe internal storage.
for updating
1: Flash ROM
2: Flash TWRP installer
3: reboot again to recovery to boot from second slot.
4: Flash Gapps
5: Flash magisk
6: wipe dalvik cache and reboot to system.
That's all.
use tool all in one to decrypt internal storage
Help me with this situation
Why can not flash?
Do you Reverted partition to stock partitioning?
Is your recovery an up to date recovery like TWRP 3.2.x,3.5.1, OrangeFox ,SHRP?
sys1admin said:
Help me with this situation
Click to expand...
Click to collapse
That happened to me once when using the reparticioner I had to install the rom 8.1 to my factory phone with odin after the first start I installed the twrp and from there my cell phone started working fine again
sys1admin said:
Help me with this situation
Click to expand...
Click to collapse
First thing is few lineage OS not work on Vendor partition. To over come this use below steps:
Note: Use orange fox recovery for smooth flow
1. Run revert vendor practitioner for exynos 7870.
2. Then reboot to recovery.
3. Goto format option perform format ( This will erase your internal storage data before action this step take a backup)
4. Then navigate to wipe option then wipe Dalivk cache, cache, system, data, internal storage
5. Then install lineage os zip. reboot and enjoy
If you want to install any treble rom in feature better use Universal script. This script make 4096MB system partition, 512MB vendor partition & 57 cache partition