Database Info

help wit new update/youtube

i used to ba able to watch youtube videos on my 6700 using this tutorial
http://discussion.treocentral.com/showthread.php?t=148801
it uses the core media player and a flash plugin for pie..
the wm6 rom update comes with the tcmp all ready pre installed..only problem is i cant get the pie flash addon to work with it....is there anyway i can get the plugin to work..or maybe delete this version of tcmp and install the one from the tutorial...i want my youtube back!!!...please help anyone..

go to this site: http://www.ytpocket.com/
redownload and install everything then follow the "change settings info"
you should be golden

[Q] Root procedure for Superpad V10 8GB using z4root?

I've seen a couple of videos on youtube about doing a root on these pads. I have 1 coming during the week, here is some of the technical spec for it...
Real Android 2.3 system, Flytouch 3 upgrade version
CPU VC882 Embedded 800MHz~1GHz ARM Cortex A8 32-bit processor core
I'm not sure of the exact make.
Is it really as simple as it seems on the youtube videos i.e install LauncherPro and select USB debugging option, then installing z4root, and that will be the device rooted?
Also, I downloaded the z4root.apk file on to my pc, but would I be better just downloading the .apk file straight on to the tablet via the browser rather than trying to transfer it from my pc?
Also, once installed, is it possible to upgrade the OS from 2.3 to a later version?
Sorry for the basic noobish questions, and thanks for any help you can give :good:

how to gain root access on android tv box

--------------------------------------------------------------------------------
total noob here
just bought android tv box in the hope of using it mainly for downloading torrents straight to usb hdd but turns out i need to change write permissions which i believe needs the device to be rooted.
problem being i dont have a clue how to root device.
im not too bothered about installing new firmware or roms etc i just need to change one setting to allow write permission
please help
the device in question is android "wizz" made by chinavasion "cvji-e272"
it is the model that has the port for in styalling 2.5inch hdd.
android 4.2
cortex a7 dual core
1gb ram
1 ghz processor speed
thanks in advance

Rooting Android TV box
I think the TV boxes are already rooted. They are just like an Android tablet, minus the screen.
You just need to install superuser app and the file manager app (eg Total Commander) to enable you to change file permissions. Of course, it will help a lot if you connect up to a screen, keyboard and mouse.
Hope this helps.

Quad core android based projector, Ruishida T16P

I got this "smart" projector , a T16P , recently and it's a pretty great device running KitKat I think. I'm not too in love with the ROM however and would love to root it and put some better firmware on if it's available. Kodi runs beautifully on it.
What would I need to do to achieve this? I've no idea how to get it into download mode, or how to backup the existing ROM, extract some hardware drivers ?
It would be such a fun device to run alternative OS images on, or maybe even an ARM linux. It's such capable hardware, it pains me to not have more control over it's software.

I do not recommend to do this.
I had the same feeling so I tried to update to lollipop... and since then I can't boot the projector anymore

T16p
gowger said:
I got this "smart" projector , a T16P , recently and it's a pretty great device running KitKat I think. I'm not too in love with the ROM however and would love to root it and put some better firmware on if it's available. Kodi runs beautifully on it.
What would I need to do to achieve this? I've no idea how to get it into download mode, or how to backup the existing ROM, extract some hardware drivers ?
It would be such a fun device to run alternative OS images on, or maybe even an ARM linux. It's such capable hardware, it pains me to not have more control over it's software.
Click to expand...
Click to collapse
I have similar problem can't seem to restore my device to factory settings, also I removed android system app to another location and it not installing any apps. It's downloading not installing, gets the error unfortunately package installer has stopped working. Help appreciated.

[Completed] dual boot tablet Android 4.4.4 brocken

Hello,
I have a jumper EZpad mini 2, purchased in China. For 120 €. Actually, everything was nice only the Android 4.4.4 had no Play Store and a few angry Chinese apps. After i got root the chinese apps were no problem any more. But i tried very much thinks to get the play store running .... at the end I unfortunately made the mistake of copy files that were intended for another tablet, directly into the system directory via root explorer. Since this i always get "Setup assistant" (or is it setupt wizard in english?) has been closed and googleserviceframwork has been closed. (all the time.. so again again and again) So I tried a factory reset. Even though I was almost clear that it will not help. Now i cant pass the beginning setup where you can chose your language and wifi because i still get the Setup assisatant failure.
But I tried to reinstall the Google Service Framework and the Setup Wizard with the ADB-tools but he wallways brings:
Failure [INSTALL_FAILED_OLDER_SDK]
When I go into recovery mode I have the option to load an update by ADB or internal memory.. I also have the possibility to get in a mode where he waits for fastboot commands...
Unfortunatly Jumper provides not roms or updates. It was even hard to get the USB-drivers for that Tablet
How can i fix my android problems?
Is there a universal CWM which also runs on that tablet without destroying the windows 10 funktion? Unfortunately, I've found so far no specific.
Can I repair the Setup Wizard and the framework still somehow?
Here are the key figures for the tablet:
Dual Boot Win 10 and Adroid 4.4.4
CPU: Intel Atom Baytrail T Z3735F Quad-Core Processor
Screen resolution: 1920 x 1200 (16:10)
RAM: 2GB, DDR3L
ROM: 64GB
Best regards
Prakti

Prakti said:
Hello,
I have a jumper EZpad mini 2, purchased in China. For 120 €. Actually, everything was nice only the Android 4.4.4 had no Play Store and a few angry Chinese apps. After i got root the chinese apps were no problem any more. But i tried very much thinks to get the play store running .... at the end I unfortunately made the mistake of copy files that were intended for another tablet, directly into the system directory via root explorer. Since this i always get "Setup assistant" (or is it setupt wizard in english?) has been closed and googleserviceframwork has been closed. (all the time.. so again again and again) So I tried a factory reset. Even though I was almost clear that it will not help. Now i cant pass the beginning setup where you can chose your language and wifi because i still get the Setup assisatant failure.
But I tried to reinstall the Google Service Framework and the Setup Wizard with the ADB-tools but he wallways brings:
Failure [INSTALL_FAILED_OLDER_SDK]
When I go into recovery mode I have the option to load an update by ADB or internal memory.. I also have the possibility to get in a mode where he waits for fastboot commands...
Unfortunatly Jumper provides not roms or updates. It was even hard to get the USB-drivers for that Tablet
How can i fix my android problems?
Is there a universal CWM which also runs on that tablet without destroying the windows 10 funktion? Unfortunately, I've found so far no specific.
Can I repair the Setup Wizard and the framework still somehow?
Here are the key figures for the tablet:
Dual Boot Win 10 and Adroid 4.4.4
CPU: Intel Atom Baytrail T Z3735F Quad-Core Processor
Screen resolution: 1920 x 1200 (16:10)
RAM: 2GB, DDR3L
ROM: 64GB
Best regards
Prakti
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. There isn't a specific forum for your device. However, you can ask for help here:
Android Q&A, Help & Troubleshooting
Good luck!