Hello,
I have a jumper EZpad mini 2, purchased in China. For 120 €. Actually, everything was nice only the Android 4.4.4 had no Play Store and a few angry Chinese apps. After i got root the chinese apps were no problem any more. But i tried very much thinks to get the play store running .... at the end I unfortunately made the mistake of copy files that were intended for another tablet, directly into the system directory via root explorer. Since this i always get "Setup assistant" (or is it setupt wizard in english?) has been closed and googleserviceframwork has been closed. (all the time.. so again again and again) So I tried a factory reset. Even though I was almost clear that it will not help. Now i cant pass the beginning setup where you can chose your language and wifi because i still get the Setup assisatant failure.
But I tried to reinstall the Google Service Framework and the Setup Wizard with the ADB-tools but he wallways brings:
Failure [INSTALL_FAILED_OLDER_SDK]
When I go into recovery mode I have the option to load an update by ADB or internal memory.. I also have the possibility to get in a mode where he waits for fastboot commands...
Unfortunatly Jumper provides not roms or updates. It was even hard to get the USB-drivers for that Tablet
How can i fix my android problems?
Is there a universal CWM which also runs on that tablet without destroying the windows 10 funktion? Unfortunately, I've found so far no specific.
Can I repair the Setup Wizard and the framework still somehow?
Here are the key figures for the tablet:
Dual Boot Win 10 and Adroid 4.4.4
CPU: Intel Atom Baytrail T Z3735F Quad-Core Processor
Screen resolution: 1920 x 1200 (16:10)
RAM: 2GB, DDR3L
ROM: 64GB
Best regards
Prakti
Prakti said:
Hello,
I have a jumper EZpad mini 2, purchased in China. For 120 €. Actually, everything was nice only the Android 4.4.4 had no Play Store and a few angry Chinese apps. After i got root the chinese apps were no problem any more. But i tried very much thinks to get the play store running .... at the end I unfortunately made the mistake of copy files that were intended for another tablet, directly into the system directory via root explorer. Since this i always get "Setup assistant" (or is it setupt wizard in english?) has been closed and googleserviceframwork has been closed. (all the time.. so again again and again) So I tried a factory reset. Even though I was almost clear that it will not help. Now i cant pass the beginning setup where you can chose your language and wifi because i still get the Setup assisatant failure.
But I tried to reinstall the Google Service Framework and the Setup Wizard with the ADB-tools but he wallways brings:
Failure [INSTALL_FAILED_OLDER_SDK]
When I go into recovery mode I have the option to load an update by ADB or internal memory.. I also have the possibility to get in a mode where he waits for fastboot commands...
Unfortunatly Jumper provides not roms or updates. It was even hard to get the USB-drivers for that Tablet
How can i fix my android problems?
Is there a universal CWM which also runs on that tablet without destroying the windows 10 funktion? Unfortunately, I've found so far no specific.
Can I repair the Setup Wizard and the framework still somehow?
Here are the key figures for the tablet:
Dual Boot Win 10 and Adroid 4.4.4
CPU: Intel Atom Baytrail T Z3735F Quad-Core Processor
Screen resolution: 1920 x 1200 (16:10)
RAM: 2GB, DDR3L
ROM: 64GB
Best regards
Prakti
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. There isn't a specific forum for your device. However, you can ask for help here:
Android Q&A, Help & Troubleshooting
Good luck!
Related
Hi There
I have just got a new tablet it is the first one I have had and I really enjoy useing it, what I would like to know is how to root it I have never rooted a tablet before but I did use to play about with HTC phones a while back and try different roms.
So if anyone could help and any advise would really be appreciated.
The tablet I have is a Natpc x210 also known as kingpad flytouch 9 10.1
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Thanks in advance
Fermec
Starting to think I have made the wrong choice buying one of these, no matter how hard I search I cannot find any Infomation on how to root this.
It is a great tablet but just can't root it
OK I have managed to root it this is how I did it
I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec
OK now I have managed to root the natpc x210, I would like to edit the build prop to make it think it is a Samsung Galaxy or Nexus 7 to give me more options from the market.
I have done a lot of searching but still not sure what to edit as I don't want to brick the tablet, I have installed build prop editor but could someone please tell what to change in the build prop.
Cheers
Fermec
hard reset
fermec said:
OK now I have managed to root the natpc x210, I would like to edit the build prop to make it think it is a Samsung Galaxy or Nexus 7 to give me more options from the market.
I have done a lot of searching but still not sure what to edit as I don't want to brick the tablet, I have installed build prop editor but could someone please tell what to change in the build prop.
Cheers
Fermec
Click to expand...
Click to collapse
How do you proceed for hard reset ?
Hi,
I hope this is the right place for my question.
I just bought the Toshiba Excite Go (AT7-C8) which has an Intel x86 processor and runs Android 4.4.2 (KitKat).
(Unfortunately I am not allowed to provide the link to the product page as a link, here a few specs:
Processor*Intel® Atom® Processor Z3735G (2MB Cache, Up to 1.83GHz)
Memory1GB (on board)
Storage*8GB eMMC
)
Since it has an x86 processor I was hoping I can install somehow a Linux system on this tablet. I would like to run some home automation applications (EIBD, Linknx and openHab) which I currently run on a Geode LX 800 system. I think this here is much more powerfull with nearly the same power consumption.
Unfortunately I have no idea how to do a Linux installation on such a Android based system. Did anyone already try this and may have a small tuturial?
Thanks a lot,
Ron
Nobody has an idea or hint?
Was someone able to get root access to this tablet?
I can't even move any app to the SD card.
I start to hate this tablet, as many applications are not available for it and I can't get a Linux system set up either ...
I would appriciate any suggestion.
Root
Hello
I found a universal method for tablets on Intel, but no one tested
the Toshiba AT7-C8
http://forum.xda-developers.com/andr...p-cwm-t2975096
Regards
Hello all, thanks in advance for your help! I have a problem and am looking for some advice as I have tried everything I can think of.
I own this cruddy generic tablet which somehow became riddled with malware and I recently realised after a factory reset that the malware is actually pre-installed. I'm pretty sure I know what the offending applications are (one of them is even named 'popup' - well cheeky) but I am unable to remove or disable them, including through 3rd party software like AVG and Avast.
I think I need to root it so I can either get rid of the malware or install a custom rom. However all the root applications which I install on the tablet fail; when I get error messages they're usually to the effect that the tablet is not vulnerable to a given exploit. Most of the PC (Windows 10) applications I have installed have failed to recognise the tablet which suggests a problem with drivers.
I have tried these things:
- connected to the device (mass storage mode) and browsed the tablet successfully
- verified that debug mode is enabled
- installed generic google adb drivers
- uninstalled those and other drivers, then installed pda.net, allowed it to install drivers, connected successfully using pda, KingRoot etc still failed to connect.
There is one thing that sort of worked. OneClickRoot failed to connect initially (same as the others) but seemed to connect successfully when I selected the device manually (which I found by plugging in the build #).. However it's not possible to verify because it cost $40 which is probably just throwing good $ after bad and anyway I'm not willing to admit defeat yet!
Here is the spec:
Model #: Q90
9 inch
Allwinner A23 Dual Core
Android 4.2
8GB
Build #: phpq23083121891
Thanks again in advance for your help!
shaynoe said:
Hello all, thanks in advance for your help! I have a problem and am looking for some advice as I have tried everything I can think of.
I own this cruddy generic tablet which somehow became riddled with malware and I recently realised after a factory reset that the malware is actually pre-installed. I'm pretty sure I know what the offending applications are (one of them is even named 'popup' - well cheeky) but I am unable to remove or disable them, including through 3rd party software like AVG and Avast.
I think I need to root it so I can either get rid of the malware or install a custom rom. However all the root applications which I install on the tablet fail; when I get error messages they're usually to the effect that the tablet is not vulnerable to a given exploit. Most of the PC (Windows 10) applications I have installed have failed to recognise the tablet which suggests a problem with drivers.
I have tried these things:
- connected to the device (mass storage mode) and browsed the tablet successfully
- verified that debug mode is enabled
- installed generic google adb drivers
- uninstalled those and other drivers, then installed pda.net, allowed it to install drivers, connected successfully using pda, KingRoot etc still failed to connect.
There is one thing that sort of worked. OneClickRoot failed to connect initially (same as the others) but seemed to connect successfully when I selected the device manually (which I found by plugging in the build #).. However it's not possible to verify because it cost $40 which is probably just throwing good $ after bad and anyway I'm not willing to admit defeat yet!
Here is the spec:
Model #: Q90
9 inch
Allwinner A23 Dual Core
Android 4.2
8GB
Build #: phpq23083121891
Thanks again in advance for your help!
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except this thread:
[GUIDE][ROOT][TWEAKS] Generic Allwinner A23 Tablet
Try posting your query there. Experts there may be able to help you.
Good luck
TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Teclast x98 plus (c2d6) dual os booting problem
I FOUND THE BIOS FOR THE TECLAST X98 PLUS II C2D6 FROM http://chinagadgetsreviews.com BUT, AS PER THE GUIDELINES THE UPDATE MUST BE FROM THE WINDOWS MODE, IS THERE ANY WAY TO UPDATE THE BIOS IN ANDROID OR TWRP MODE OR ANY OTHER MODE
apparaoadari said:
TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Click to expand...
Click to collapse
Greetings and welcome to assist. This is for another model but the guide should work if you swap files
https://forum.xda-developers.com/x98-air/help/unbrick-bios-softbrick-x98-air-3g-id-t3285191
Good luck
Sawdoctor
So recently I got this cheap android 5.1.1 tablet with the intel cpu.
So I am into this kind of stuff with rooting devices trying different methods/programs.(NOT PROFESSIONAL)
Then I wondered can I somehow make this dualboot win10 and android at the same time...
because I did tried like 10 root aplications and it didnt work eventually so I was pissed of really bad.
After researching for 2 hours on google and ending up with crapware and screen sharers.
Hope someone here help me..
Device information: Casper VIA_S7, android 5.1.1(32 bit) CPU: x86 64 bit (SSSE3)
By the way is it possible to run one of the OS's from micro sd because of the low storage available on the device *16GB*
*If needed i can provide the detailed information of the device or other kinds*
Hi !
Dual boot isn`t as simple as it looks , it needs to be developed for your device but as I have tried to search , your device isn`t listed here on xda
You can ask here where maybe other users with a similar device can provide more feedback !
Good luck !