I have a serious problem! URGENT HELP please.
I did a clean factory because my phone was very slow. I have the V1.3 Dexters, patch 1 and 2, before restoring to factory settings nandroid I made a copy, a copy mybackup pro, and another with Titanium backup pro. After re-establish and restore the backup, everything worked fine, but soon the telephone began again to be slow.
By restoring the factory settings was not sure whether the patches were to be or not, ie had the doubt if I had to install again, well, after restoring the backup, I went into recovery mode and installed the patch again 1 ..... and my phone stopped working, when I restarted indicating left hundreds of sales each of the applications "forced closure."
I tried entering recovery mode to put it back to factory defaults, however it did not work, got stuck on the logo of Dexter's Froy.
When reset to factory mode patches are always installed or I have to reinstall? I ask this because after restoring the backup, would not let me move the applications to the SD, the re-established applications in the phone's internal memory, not the SD (which was before) and I tried to reinstall both patches.
Summary
By restoring the backup, he did everything, but applications that were in the SD, were installed in internal memory.
Newly installed Patch 1 and could not enter, indicating that there was a problem and ought to shut off.
I went into recovery mode, factory settings and was in Dexter's logo. Remove the battery and still remains in the logo.
What I can do now that he has been in the logo?
When restored to factory settings, patches are installed?
Thanks
If restoring your nandroid fails (or yields unsatisfactory results) I would restore a fresh copy of Dexter's 1.3 (Wipe data / Factory reset) & then apply Mioze7Ae's v3 update. Then grab your backup app from the market & restore what's missing.
3rdstring said:
If restoring your nandroid fails (or yields unsatisfactory results) I would restore a fresh copy of Dexter's 1.3 (Wipe data / Factory reset) & then apply Mioze7Ae's v3 update. Then grab your backup app from the market & restore what's missing.
Click to expand...
Click to collapse
Thanks for your answer, the big problem I have is that you get stuck on the logo of Dexters, and pressing the volume key gallery and enters recovery mode, but only gives me three options, apply update, restore to factory data A partition.
I do not know what to do, yes I made a copy before installing nandroid dexter rom, but to apply update tells me there's an error, practically does not let me do anything. I am currently downloading 4.9 and firmware RSDLite USA +. sbf I do not know if that can do something...
Hold in the volume up while turning on the device to get back in to OpenRecovery. I believe the key combinations your trying takes you to Motorola's recovery.
Tavinsky said:
I have a serious problem! URGENT HELP please.
I did a clean factory because my phone was very slow. I have the V1.3 Dexters, patch 1 and 2, before restoring to factory settings nandroid I made a copy, a copy mybackup pro, and another with Titanium backup pro. After re-establish and restore the backup, everything worked fine, but soon the telephone began again to be slow.
By restoring the factory settings was not sure whether the patches were to be or not, ie had the doubt if I had to install again, well, after restoring the backup, I went into recovery mode and installed the patch again 1 ..... and my phone stopped working, when I restarted indicating left hundreds of sales each of the applications "forced closure."
I tried entering recovery mode to put it back to factory defaults, however it did not work, got stuck on the logo of Dexter's Froy.
When reset to factory mode patches are always installed or I have to reinstall? I ask this because after restoring the backup, would not let me move the applications to the SD, the re-established applications in the phone's internal memory, not the SD (which was before) and I tried to reinstall both patches.
Summary
By restoring the backup, he did everything, but applications that were in the SD, were installed in internal memory.
Newly installed Patch 1 and could not enter, indicating that there was a problem and ought to shut off.
I went into recovery mode, factory settings and was in Dexter's logo. Remove the battery and still remains in the logo.
What I can do now that he has been in the logo?
When restored to factory settings, patches are installed?
Thanks
Click to expand...
Click to collapse
I say go clean install here 2.1.1 to 2.2.1 to v3 use Khal's it's Stable and fast!
Use nandroid for back up.
Install apps to EXT partition if you dont want to loose them.
Our setup is too custom to use backup apps.
3rdstring said:
Hold in the volume up while turning on the device to get back in to OpenRecovery. I believe the key combinations your trying takes you to Motorola's recovery.
Click to expand...
Click to collapse
THANKS! Very Grateful! I did what you told me, turn the volume up button and entered into openrecovery, I applied the patch 3, and the phone is working properly. Really very grateful, I was scared, and had already prepared my old palm center.
Greetings!
hellmonger said:
I say go clean install here 2.1.1 to 2.2.1 to v3 use Khal's it's Stable and fast!
Use nandroid for back up.
Install apps to EXT partition if you dont want to loose them.
Our setup is too custom to use backup apps.
Click to expand...
Click to collapse
Thanks for your response, this means that the backups do not apply the applications that are in SD?
The patches remain after reestabler to factory settings?
Now that I have installed the patch 3, if I wanted to restore to factory settings I have to re-install the patches?
Tavinsky said:
The patches remain after reestabler to factory settings?
Now that I have installed the patch 3, if I wanted to restore to factory settings I have to re-install the patches?
Click to expand...
Click to collapse
I think the patch remains in effect after a factory reset, no need to reapply the patch.
Sent from my XT720 using XDA Premium App
Hi, just recently I flashed my Backup ROM to retrieve contacts that I have lost. Before, I had only flashed the CleanROM and a theme from Wasabiwa3. But because my contacts were lost, I decided to start over and flash my Backup ROM. Using TWRP, I did. However, when I did, my phone hard bricked. It would not turn on, but would rather vibrate when I attempted. I have pulled the battery multiple times, plugged it into the computer, everything. Wasabiwa3 was able to get me out of my bricked phone. However, it seems as though my Backup is dead. I don't understand how restoring my Backup would cause my phone to brick. Why did that happen? Is there anything I can do to restore my Backup ROM/contacts?
Your backup is a ROM not a phone so how can a backup be dead? Also you didn't mention the name of the backup ROM. Nor did you say if you did what you supposed to do when flashing which wipe cache, dalvik and factory reset which you need to when switching from aosp and Touchwiz.
Make sure the backup contains a system partition back up within it, next wipe the system partition of your current rom and retry restoring from the backup. Or if you have a stock nandroid, use the advanced restore option to restore the system partition.
Surge1223
So earlier today my phone stopped getting service . After trial and error i ended up in a boot loop so i nandroid backped and factory reset. I reflashed PAC man ROM and all seemed good, so i went to nandroid advanced restore and tried to only restore data to try and not boot loop again.this ddidn't work so i wiped and flashed PAC man again. This time however i restored the boot and system and my phone works fine. I'm unsure of what restoring sd-ext will do. So my question is, how to i restore my data now from nandroid without getting boot looped? All i really need off of it is my texts. (Apps are on titanium)
shewantsmyduck said:
So earlier today my phone stopped getting service . After trial and error i ended up in a boot loop so i nandroid backped and factory reset. I reflashed PAC man ROM and all seemed good, so i went to nandroid advanced restore and tried to only restore data to try and not boot loop again.this ddidn't work so i wiped and flashed PAC man again. This time however i restored the boot and system and my phone works fine. I'm unsure of what restoring sd-ext will do. So my question is, how to i restore my data now from nandroid without getting boot looped? All i really need off of it is my texts. (Apps are on titanium)
Click to expand...
Click to collapse
I think your best option is to download nandroid manager from the playstore. That will allow you to pull your data from your backup and restore it from the app, it's similar to the way titanium backup restores data.
I think the issue you're having has to do with restoring data from a 4.2.2 rom. Most recoveries have issues with restoring data because 4.2.2 is setup for multiuser and the data locations are different. I think when you're restoring data only, it's not actually writing your data correctly and it's soft bricking your phone.
Sent from my SCH-I535 using Tapatalk 2
I got nandroid manager and it worked perfectly! Thanks a million!Exactly what I needed
Ok, so I asked this in XDA Assist but can't post reply there.
This is what happened on my Xperia mini St15i, with firmware 4.1.B.0.587:
1. I turned on Bluetooth and the phone got stuck in infinite boot loop - apparently this is a known bug.
2. I decided to try out CM 9. Installed CWM Recovery and did backup on sd card and flashed CM.
3. I remembered that I did the backup earlier so I thought maybe there is a way to keep my apps and data.
4. I went back to CWM and restored from backup. CM didn't boot then, so I flashed back stock rom with flashtool and booted the phone. The apps and data was there( at least for one app which was very important), but contacts and messages were gone.
So my question is, is there a way to recover ALL user data from the backup? I don't care if it's on stock rom or CM at this point.
I hope some of you knowledgeable people can help!
Many thanks,
Paul
Can someone please help. :crying:
I managed to restore it with all the data by trial and error (I don't know HOW). Then at night the phone lost battery and is back to rebooting forever.
If I restore all via CWM and then flash stock, it boots up saying "Android is upgrading" and then keeps rebooting.
If I do a factory reset via CWM and flash stock rom, the phone is back to factory setting with no data.
WHICH partitions should I recover and which should I flash to retain the data??? HELP :crying:
Hi all, my Note 2 has been running crDroid for quite sometime but this morning the network locked the phone back to AT&T. I restored my stock backup, entered my unlock code (again), and then tried restoring my crDroid backup. However, as soon as it finishes the boot sequence, it continually pops up a window saying that Google Services Framework has stopped and none of the apps will launch. I have tried restoring the backup in a few different ways:
Restore and boot.
Restore, wipe dalvik, boot.
Restore, flash the latest package of Open Gapps, boot.
Wipe internal memory, restore, boot.
I'm at a loss for why it suddenly will not work anymore after having to reflash stock. I am now using a clean install and it is working fine, but I'd like to get back to my old install so I don't have to go through all of the setup of the phone again. Any suggestions?
P.S. Anyone know why my phone relocked itself when it has been working fine?