Do not install pocket lock or these kind of apps on your phone if you've replaced the display panel with non genuine otherwise your proximity sensor will stop working with that display panel and your screen will be black during calls, and it will be use less if you change the proximity sensor. The proximity won't work until you replace the another display panel...
PioneerSeeker said:
Do not install pocket lock or these kind of apps on your phone if you've replaced the display panel with non genuine otherwise your proximity sensor will stop working with that display panel and your screen will be black during calls, and it will be use less if you change the proximity sensor. The proximity won't work until you replace the another display panel...
Click to expand...
Click to collapse
Do you know where I can buy a genuine display for Z3?
LightSpectrum said:
Do you know where I can buy a genuine display for Z3?
Click to expand...
Click to collapse
I think Z3 is a discontinued product now and May be you could find it on ebay in used parts list.
LightSpectrum said:
Do you know where I can buy a genuine display for Z3?
Click to expand...
Click to collapse
witrigs! i just bought a new OEM display, preinstalled into a new housing from them for like 30 bucks. much better than the slightly smaller non OEM i had previously installed, and equivalent in size/color to the one in my z5.
cabasse84 said:
witrigs! i just bought a new OEM display, preinstalled into a new housing from them for like 30 bucks. much better than the slightly smaller non OEM i had previously installed, and equivalent in size/color to the one in my z5.
Click to expand...
Click to collapse
Can you post the link to buy it please? Is very interesting!
LightSpectrum said:
Can you post the link to buy it please? Is very interesting!
Click to expand...
Click to collapse
sure, here you go:
https://www.witrigs.com/oem-lcd-screen-assembly-for-sony-xperia-z3-black
I recommend also getting the earpiece mesh 111124 and oem speaker 109368 as well - they are glued into the front for waterproofing and i ripped the cone off mine last time i tried to do this.
cabasse84 said:
sure, here you go:
https://www.witrigs.com/oem-lcd-screen-assembly-for-sony-xperia-z3-black
I recommend also getting the earpiece mesh 111124 and oem speaker 109368 as well - they are glued into the front for waterproofing and i ripped the cone off mine last time i tried to do this.
Click to expand...
Click to collapse
Thank you very much! :good:
Related
Hello everyone, I considered putting this in the marketplace but it makes 100% more sense to have it here.
I'm selling my faulty nexus one for spare parts so if anyone needs a part of the phone (except the PCB that the microusb sits on)
give me a PM and we can come to some sort of arrangement, obviously undercutting ebay prices lol.
for example... lcd replacement, digitizer or camera, speaker, volume buttons etc.
I've got a weird one to ask about....
What about the bottom soft touch cover (that goes over the usb port)?
do you have the little black plastic piece that covers the bottom pcb? its got the little vibrator connected to it.
Mine is like slowing down and isnt as powerful and i think its the reason for my haptic feedback dying
MaximReapage said:
I've got a weird one to ask about....
What about the bottom soft touch cover (that goes over the usb port)?
Click to expand...
Click to collapse
Could you get a picture of a nexus one and draw on paint what bit you mean? lol
Hi, may I have the camera module, the flash module and the power/volume buttons? how much for them? also, can u send them to colombia? thx!
If not, I got a friend in USA who will receive them!
edit: and usb cable and charger!! I know, I've been very bad with my N1
Rikarudo said:
Hi, may I have the camera module, the flash module and the power/volume buttons? how much for them? also, can u send them to colombia? thx!
If not, I got a friend in USA who will receive them!
edit: and usb cable and charger!! I know, I've been very bad with my N1
Click to expand...
Click to collapse
PM me so we can sort it all out
Megacamz said:
Hello everyone, I considered putting this in the marketplace but it makes 100% more sense to have it here.
I'm selling my faulty nexus one for spare parts so if anyone needs a part of the phone (except the PCB that the microusb sits on)
give me a PM and we can come to some sort of arrangement, obviously undercutting ebay prices lol.
for example... lcd replacement, digitizer or camera, speaker, volume buttons etc.
Click to expand...
Click to collapse
Hi Magacamz! I wonder if you still have your LCD Replacement? For how much are you expecting to sell it? Would you send it using USPS International? If positive, we can arrange using Paypal or something similar...
Tnks!
gciola said:
Hi Magacamz! I wonder if you still have your LCD Replacement? For how much are you expecting to sell it? Would you send it using USPS International? If positive, we can arrange using Paypal or something similar...
Tnks!
Click to expand...
Click to collapse
i'll take second in line if he doesn't take this.
Megacamz said:
Could you get a picture of a nexus one and draw on paint what bit you mean? lol
Click to expand...
Click to collapse
It is literally the piece that goes over the USB port and gold power connectors on the bottom of the phone. It's the same material as the battery cover.
Hy Guys,
I've broken my Moto G 4G front glass. It is still fully working but I want to change the screen.
My problem is that all the replacement parts I've found are marked as compatible with XT 1032/1033/.... but none is mentioning 1039.
Does anyone knows if the screens are the same? Or there is any difference with the connectors?
Thanks in advance for your reply.
Paulo
pmp said:
Hy Guys,
I've broken my Moto G 4G front glass. It is still fully working but I want to change the screen.
My problem is that all the replacement parts I've found are marked as compatible with XT 1032/1033/.... but none is mentioning 1039.
Does anyone knows if the screens are the same? Or there is any difference with the connectors?
Thanks in advance for your reply.
Paulo
Click to expand...
Click to collapse
I think screen from xt1032 is compatible with xt1039/ Ask to seller
tony_evl said:
I think screen from xt1032 is compatible with xt1039/ Ask to seller
Click to expand...
Click to collapse
Thanks for your reply. I've asked before but the guy took sometime to reply. Apparently it's not, according to him.
This seems a little strange IMHO, but I'll trust is answer.
I've found another seller with a replacement for 4G and ordered it.
Thanks again.
Paulo
Where did you find the screen?
pydreckas said:
Where did you find the screen?
Click to expand...
Click to collapse
On eBay. Here is the link to the one I've bought: http://www.ebay.com/itm/New-LCD-Dis...e_Replacement_Parts_Tools&hash=item20e861f8ff
The same seller also has another one without the frame (http://www.ebay.com/itm/New-LCD-Dis...e_Replacement_Parts_Tools&hash=item1c420c93d0) but the price difference is small and the one with the frame is easier to use.
I should receive mine today and I'll let you know my impressions after replacing the screen,
Replaced! And working!
Screen replacement done. Extremelly easy to do it and it is fully working. Screen quality is the same as the original.
pmp said:
Screen replacement done. Extremley easy to do it and it is fully working. Screen quality is the same as the original.
Click to expand...
Click to collapse
I ordered a 1032/1033 screen & lcd via ebay and it fits the XT1039 perfectly - there's no difference whatsoever with the cabling.
its quite an easy job to do though even though the lcd on my moto g 4g wasnt damaged, i bought the glass & lcd already fitted together as it makes the job so much easier.
thanks for all the information it was very beneficial.
i have the exact same phone but u just want to replace the glass, will XT1036 etc. fit on my old LCD screen.
Cherise said:
thanks for all the information it was very beneficial.
i have the exact same phone but u just want to replace the glass, will XT1036 etc. fit on my old LCD screen.
Click to expand...
Click to collapse
It will fit, but replacing only the glass is a much trickier task. There are some guys showing the process on youtube but you will see that it is not easy.The problem is that the glass is attached to the LCD with a strong glue and removing it without damaging the LCD is almost impossible.
I would not advice to do it yourself.
Just had a look at video tutorial for replacing glass and screen, its good to know that if i ever damage my screen it is quite an easy fix and pretty damn cheap
Ajuda - Help
pmp said:
Screen replacement done. Extremelly easy to do it and it is fully working. Screen quality is the same as the original.
Click to expand...
Click to collapse
Hello!
Hi need a new screen too! Can someone send a link with the video instalation.
Regards
Rui
Take a look at this one: https://www.youtube.com/watch?v=ycER7MH61l8
Paulo
Broke mine (model xt1039, Moto G 4G) today
pmp said:
On eBay. Here is the link to the one I've bought: http://www.ebay.com/itm/New-LCD-Dis...e_Replacement_Parts_Tools&hash=item20e861f8ff
Click to expand...
Click to collapse
The site is unavailable from here (Europe/France). I found another one selling xt1032 (which someone in a post said is compatible) in USA http://www.fixez.com/motorola-moto-g-display-assembly-and-frame, but delivery time to Europe seems very long however if one don't want to spend more than half the price of the phone in order to get this part..
Will try a local phone repair shop tomorrow but am sceptic.
Hi there,
I have a question... I suggest that the screens are exactly the same (LTE and non-LTE versions) so I hope that there will be no problems if I'll try to repair my XT1039 with a XT1032 screen (In the description the seller on ebay says that its comaptible and moreover the screen is white coloured which means its for the 4G model).
My question is if anyone has experience with cheaper screens like this one: http://www.ebay.com/itm/351153277410?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Do you think that it could be a fake one? Should I invest in a more expensive screen ? Because the links for screens here in this thread were usually approx. 40 dollars.
I'll be glad for any reactions regarding this problem.
Hello guys
I can confirm that 1032 lcd works on the 1039 model. I have ordered replacemenet lcd with frame for 1032 model and installed it on 1039. LCD is completly same, but frame required some small adjustment. There is small peace of plastic that had to be trimmed of, but it is not visible after assembly. I was easier for me than removing the frame from the LCD.
Hi guys , i want to know if this :
http://www.etradesupply.com/replacement-part-for-motorola-moto-g-front-housing-black.html
is comaptible with xt1039 4g version . I read your posts and i've seen that it might not be compatible .
Hi,
I successfully replaced a new screen to my phone. The only problem i have is that there is zone where the touch screen is not working (in bottom of the phone)
Is it a problem of the screen that i bough or an error in assembly?
Thanks for your help.
Hello, my son broke his Moto G LTE too. All works but display with black bubbles.
Any new suggestion about where to look for the replacement screen kit? I see that the original link appears as "ended". I contacted a repair shop here in Italy and would charge about 80 euros for the whole kit+work.
May I find anything around 30-40 euros in your opinion?
I found this for 34 us $:
http://www.ebay.com/itm/New-LCD-Dis...091d56&pid=100011&rk=3&rkt=10&sd=141337688319
but delivery time is quite long... anything with better speed for delivery to Italy?
Thanks in advance for input
ivica80 said:
I can confirm that 1032 lcd works on the 1039 model. I have ordered replacemenet lcd with frame for 1032 model and installed it on 1039. LCD is completly same, but frame required some small adjustment. There is small peace of plastic that had to be trimmed of, but it is not visible after assembly. I was easier for me than removing the frame from the LCD.
Click to expand...
Click to collapse
I broke the screen on my XT1039 and got a replacement screen for the XT1032, because a lot of them said they were compatible with both so I assumed they all would be.
The screen works fine, except the screen itself is pushed away from the bezel along the left edge. Is that the same reason why you had to trim a piece of plastic from the frame?
Thanks if you can reply, I know this is an old thread
Hey guys,
the glass on my Nexus' display is shattered so badly, that I really need to do something, as I can already see parts of the logic board and the sensors are not portected anymore.
Everything is working fine so I just need the glas. I checked YouTube and I think I can pull of this kind of repair by myself.
Now I am wondering if I can buy just the cheapest glas out there, for example this one - I hope it is OK to post links: http://www.ebay.de/itm/Neu-Fur-LG-G...32?pt=LH_DefaultDomain_77&hash=item3aa957d050 .
Are there differences in glass quality?
Thanks for your help!
Do you have the glass and lcd separator machine?
No , I don't even know what that is, but in the YouTube videos I saw they didn't need one either. The Nexus 5 screen layers seem to be separate, unlike the nexus 4 where you couldn't use the touch screen with little cracks.
DiggHead said:
No , I don't even know what that is, but in the YouTube videos I saw they didn't need one either. The Nexus 5 screen layers seem to be separate, unlike the nexus 4 where you couldn't use the touch screen with little cracks.
Click to expand...
Click to collapse
Best of luck with that - you will fail. They're stuck together,and without a special tool you will break them. Also, how do you plan on sticking the new glass to the lcd?!
You need to replace the glass, digitizer and LCD in one go. The part isn't too expensive - about €50.
If you have any experience, can you point me to a model that is good?
eBay and Amazon are full of displays between ~60€ and ~120€, are they all the same?
DiggHead said:
If you have any experience, can you point me to a model that is good?
eBay and Amazon are full of displays between ~60€ and ~120€, are they all the same?
Click to expand...
Click to collapse
Personally I would only ever use an OEM part, so one made by LG. Don't go for cheap knock offs.
DiggHead said:
No , I don't even know what that is, but in the YouTube videos I saw they didn't need one either. The Nexus 5 screen layers seem to be separate, unlike the nexus 4 where you couldn't use the touch screen with little cracks.
Click to expand...
Click to collapse
Yes you do... Lol
krs360 said:
Personally I would only ever use an OEM part, so one made by LG. Don't go for cheap knock offs.
Click to expand...
Click to collapse
Thank you. Could you point me to something (if it is not allowed send a link privately). Everything priced below ~100€ seems to be non OEM parts.
dicecuber said:
Yes you do... Lol
Click to expand...
Click to collapse
Thanks for all your advice. Really helpful.
Hi.
Just bought a original flip cover for my Note 2 . But it does not wake or turn of the screen.
Am i missing something in settings. Im on Xiaomi.EU 5.10.8 Weekly.
It sure has sensor that turn of screen when i hold it to my ear, so it should be possible (?)
After changing the launcher i really begin to like this phone.
Thanks
Knievel
There aren't settings about it. The prossimity sensor work while you are phoning, it turn off the screen when is near the ear.
For change the launcher go to Settings > Apps > Default Apps > Launcher
~ Xiaomi Redmi Note 2 Prime ~
KnieveI said:
Hi.
Just bought a original flip cover for my Note 2 . But it does not wake or turn of the screen.
Am i missing something in settings. Im on Xiaomi.EU 5.10.8 Weekly.
It sure has sensor that turn of screen when i hold it to my ear, so it should be possible (?)
After changing the launcher i really begin to like this phone.
Thanks
Knievel
Click to expand...
Click to collapse
Did you manage to solve the issue?
Also, which launcher are you using
sapan.xda said:
Did you manage to solve the issue?
Also, which launcher are you using
Click to expand...
Click to collapse
Nope. I am not able to wake/turn of screen with flip cover so far.
Google Now launcher gives me the stock feeling i like, with app drawer etc.
And still have a lot of useful stuff in Miui os.
Had to flash Chainfires Supersu to change launcher and make it stick. Some trouble with permissions.
Did also uninstall a few annoying Chinese apps before i was happy with it.
Thanks
Knievel
nice cover.
Try to install any smart cover apps from google play..
hope it work.
Hello,
Can you please tell me where do you buy it? Can you please share à link?
Thank you
This cover claims it has auto-sleep/wakeup and even has video to demo that http://www.aliexpress.com/item/New-...For-Xiaomi-Redmi-Note-2-With/32506925639.html
No idea if it actually works
celalaltul said:
This cover claims it has auto-sleep/wakeup and even has video to demo that http://www.aliexpress.com/item/New-...For-Xiaomi-Redmi-Note-2-With/32506925639.html
No idea if it actually works
Click to expand...
Click to collapse
Hi.
There is a lot of apps that make you able to wake/turn off screen with flip cover.
But all of them uses to much battery, and screen turn off when its not supposed to.
This flip cover seems to clearly have an app involved.
The main reason for me to have this function is to save battery.
Both my Nexus 5 and 6 have flip covers that uses some kind of magnetic function.
Maybe this phone doesent have the right hardware and has to use the proximity sensor.
Just my guess.
Thanks
Knievel
Yes the flip cover uses the magnetic sensor and a custom app.
I don't see why the magnetic sensor should use less battery than the proximity/light ones...
So I will buy a normal flip case.
Thank you.
I dont think this phone has magnetic sensor
No magnetic sensor present in the RedMi Note 2
The Redmi Note 2 must have a magnetic sensor, because it's working with the magnetic button of my ColorCross 2 virtual reality headset (I've taken this one because it's an open one, to prevent over-heating during games, but it's not the topic) on SwivelGun game (but it's better with à mini bluetooth gamepad).
To say, RN2 must have a magnetic sensor...
Citoyen Curieux said:
To say, RN2 must have a magnetic sensor...
Click to expand...
Click to collapse
You r right, this have Magnetic Sensor look the review http://forum.xda-developers.com/redmi-note-2/general/review-xiaomi-redmi-note-2-t3196267
Did you find something?
Nope, OTA, I didn't find anything, anywhere, but, hey, I've not searched... ^^
denebulas said:
I don't see why the magnetic sensor should use less battery than the proximity/light ones...
So I will buy a normal flip case.
Click to expand...
Click to collapse
The magnetic sensor is like a mechanical switch, it doesn't need to be powered, but the proximity sensor needs to be powered to work...
Waiting for the same
I've enabled the required settings but my mobile does not respond to the (normal, without magnet) cover. I wished it used the proximity sensor, as done while calling.
parkarvv said:
I've enabled the required settings but my mobile does not respond to the (normal, without magnet) cover. I wished it used the proximity sensor, as done while calling.
Click to expand...
Click to collapse
I have been using "Gravity Screen - On/Off" app for years with my RN2 flip cover, it works like a charm.
I can recommend WaveUp.
It's free and open source; it works on Redmi Note 2 (at least with CyanogenMod 12.1) and you can install it via F-Droid or Play Store.
Hi
I am enable flip cover mode but by mobile restart now and it is now lock also not open pls help me.
Hello everyone, i have a problem with my right trigger not working everytime it is pressed. Is it something that is fixable because i also broke my screen out of frustration of my trigger not working correctly.
Someone please help
clipdawg05 said:
Hello everyone, i have a problem with my right trigger not working everytime it is pressed. Is it something that is fixable because i also broke my screen out of frustration of my trigger not working correctly.
Someone please help
Click to expand...
Click to collapse
Get a replacement display assembly including the frame. You'll have to re-assemble everything on the new frame including the air triggers. The cost difference for a display replacement with/without a new frame is minimal. Not guaranteed to fix the trigger but there is a fair chance it will.
Andrologic said:
Get a replacement display assembly including the frame. You'll have to re-assemble everything on the new frame including the air triggers. The cost difference for a display replacement with/without a new frame is minimal. Not guaranteed to fix the trigger but there is a fair chance it will.
Click to expand...
Click to collapse
Great thank you for your response. My phone is still under warranty and i think they would have at least tried fixing it until i broke the glass. Do you know of a reputable place to but original screens. I found a few online ranging from 200 to 300 dollars, and i still dont know if any of them are original
clipdawg05 said:
Great thank you for your response. My phone is still under warranty and i think they would have at least tried fixing it until i broke the glass. Do you know of a reputable place to but original screens. I found a few online ranging from 200 to 300 dollars, and i still dont know if any of them are original
Click to expand...
Click to collapse
Look it up on Ali Express, usally best prices there. $300 sounds overpriced to me, I bought one for ROG 3 a while back for around $140 including frame.
Andrologic said:
Look it up on Ali Express, usally best prices there. $300 sounds overpriced to me, I bought one for ROG 3 a while back for around $140 including frame.
Click to expand...
Click to collapse
Was it good quality. Still oled?
clipdawg05 said:
Was it good quality. Still oled?
Click to expand...
Click to collapse
Yes OLED of course. Same parts as the original.
You can put triggers on and off in Rog console,
Are they enabled?