Im trying to flash my phone into a new custom ROM cause my current on is slow and keeps crashing my phone also want to update to a different ROM. Problem is I cant reboot into recovery or boot loader or anything. Boot recovery just gives me a pink screen. Recovery just gets stuck at boot logo (it use to work but its all of a sudden decided it doesn't want to work) same thing happens when I try to factory reset my phone also the fast boot method doesnt seem to work either cause I cant get Fastboot to load on my pc. Already tried flashing my ROM and Recovery via Flashify and other apps flash your phone but just got stuck on boot logo. Tried doing a factory reset again got stuck at boot logo. Tried installing the custom ROM via Rom Installer. Still stuck at boot logo. I did several searches and there doesn't seem to be any way to resolve this issue without a recovery or other boot method im hoping someone here can help me. Also my phone wont show up on my pc so I cant access my files and im unable to install Droid explorer cause it doesn't detect my sdk folder which is odd cause it says all the drivers are installed and tools like HiSuite detects my device but the device wont show up in my computer.
Phone Model: Huawei Ascend Y300
Current ROM: Cyanogen Mod 11 (nightly version)
CM11 Version: 11-20150327-NIGHTLY-u8833
Android Version: 4.4.4
Root Access: Yes
USB Debugging Activated: Yes
Current Recovery: TWRP
PC Version: Windows 7 64-bit Home Premium (also have android studio installed on my computer)
Mobile Network: Spark 3G
If you need any further information just ask
Hi
Thanks for writing to us at XDA Assist. Take a look at this thread:
[Guide] Huawei Ascend Y300 Unlock & Root
Thread closed, thanks.
HEllo, I tied flashing my phone for rooting but since the USB didnt connect as the port is loose, the phone is still in debugging mode
Then I used framaroot from play store and rooted my device .. I used a ROM toolkit and installed a custom boot animation, now my phone is stuck on the bootloop .
I have tried wiping cache partition along with restore to default by going into the recovery mode, but it still doesnt work.
My device is on stock firmware and no custom recovery like CWM or TWRP is installed on it .
Please help .. what should I do next ?
Fumpph said:
HEllo, I tied flashing my phone for rooting but since the USB didnt connect as the port is loose, the phone is still in debugging mode
Then I used framaroot from play store and rooted my device .. I used a ROM toolkit and installed a custom boot animation, now my phone is stuck on the bootloop .
I have tried wiping cache partition along with restore to default by going into the recovery mode, but it still doesnt work.
My device is on stock firmware and no custom recovery like CWM or TWRP is installed on it .
Please help .. what should I do next ?
Click to expand...
Click to collapse
Hi, thank you for using XDA assist.
There is a general forum for android here http://forum.xda-developers.com/android/help where you can get better help and support if you try to ask over there.
Good luck.
Hey guys ? yesterday i rooted my huawei y6 scl u31(android 5.1.1,emui 3.1 with qualcomm snapdragon 210 processor ) with kingroot and replaced it wits super sume. then i rebooted my phone but it stucked on huawei logo. i immediately wiped factory reset and wiped catche partition and rebooted but it doesn't work. my 3 biggest mistakes are
1. I havn't insalled any custom recovery.
2. I havn't enabled usb debugging.
3. I havn't unlocked bootloader.
now my phone is in bootloop(stuck on logo). stock recovery is working fine. so how to unbrick it ?
I *was* have the same problem the only sulotion
Is go to a shop to format it I didn't know how so I went to a shop to fix
http://consumer.huawei.com/et-en/support/downloads/detail/index.htm?id=87771 download stock rom from the official site, then put it on an sdcard and use stock recovery to flash OR, if available, use adb (some stock recoveries have "update from adb" which lets you sideload zips).
Good luck!
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery
Hello Friends.
I have rooted so many android devices before this for installing custom ROM.
Every time I succeed in it but this time I failed and I have done big mistake that is i did not take backup of my current Rom.
I have done following steps before my device gets bricked.
1.I have rooted Galaxy grand 2 SM -g7102 with kingo root app.
2. Flash CWM recovery image by using Odin s/w.
3.This is the only recovery which suits to my device and this recovery does not show external memory card option in it.
4.So transferred Custom ROM zip file by using Fastboot method in phone memory
5.After that I tried to install custom ROM (cynogenmod 13) but I got status 7 error on the screen.
6. So that I made changes in ROM files.(in update script file)
7. Still it was not working on it.
8. So I changed my mind and tried to install Note 4 ROM from XDA which is compatible for my device.
9. Note4 ROM successfully installed in my device but when I rebooted my device it has stuck in boot loader.
(Only Samsung logo and device name - restart-again same).
10. But I was able to switch it in recovery mode and Odin mode.
11. so finally I decided to install stock ROM( firmware downloaded from official website of Samsung)
12. I successfully installed this ROM by using Odin s/w but still I have facing same problem of stuck in boot loader.
Note: Every time I have wipe cache memory, user data, etc..)
Plzz help me.