when i went Fastboot to Unlock bootloader.
The mix3 phone print that press any key to shutdown.
Bad USB cable or drivers for fastboot aren't installed properly.
newfantasy123 said:
when i went Fastboot to Unlock bootloader.
The mix3 phone print that press any key to shutdown.
Click to expand...
Click to collapse
I had the same problem. Reconnecting device to usb 2.0 port helps.
+1 for USB2.0
even over a 2.0 hub on a 3.0 port it's working...
Same here, I had to buy a cheap USB2.0 hub since my laptop just has 3.0 ports, I even tried to mount USB in a VM via VMWare and forced 2.0 but it did not work, seems to be an issue related to USB 3
Related
Ics says nothing. JB says it charging lol.
With my usb data. It was connected succefully before. So i am clue less
Are you trying to connect to transfer files, sync outlook or issue ADB or APX commands?
Does your computer play the new hardware sound?
What OS is your computer running?
Do you have USB Debugging checked?
Have you tried another USB port on your computer?
Also, many of the JB ROMs show a charging indicator via USB even if it is not really charging.
frederuco said:
Are you trying to connect to transfer files, sync outlook or issue ADB or APX commands?
Does your computer play the new hardware sound?
What OS is your computer running?
Do you have USB Debugging checked?
Have you tried another USB port on your computer?
Also, many of the JB ROMs show a charging indicator via USB even if it is not really charging.
Click to expand...
Click to collapse
APX commands
No
OS: Windows 7 64 bit.
Yes, I haave checked
I have .... 9 usb ports. None of them works.
I did use other and it didnt work.
I will test on other pc's.
Are you sure you are getting it booted up into APX mode? I know it is a bit tricky to do.
frederuco said:
Are you sure you are getting it booted up into APX mode? I know it is a bit tricky to do.
Click to expand...
Click to collapse
I used my apx mode arround 2012 so i still have it and boot up.
As for cable they claim it's 40 pin ( my second non legemit cable).
I'm gonna test today on 2 pc's :3
Also i npotic my secondary cable has usb 3.0 + there is numbers of peopel has same PROBLEM! : http://forum.xda-developers.com/showthread.php?t=1913912
Hi, just received my Surface Pro yesterday and its amazing Anyways, I've been installing all my normal desktop applications as I would do with any other new PC. Today, I tried to install drivers for fastboot so I can flash custom kernels on my Xperia S. I managed to get the fastboot and ADB drivers installed correctly by disabling driver enforcement, but every time I connect my phone in fastboot mode to my Surface, Windows says the last USB device connected has malfunctioned.
I've read that other people are having problems with Windows 8 64bit and installing drivers, but I've managed to do that without problems
I've also read that you should plug your phone into a USB 2.0 port because it won't work with USB 3.0 ports yet but since the Surface Pro has only one USB 3.0 port, I haven't had the chance to try that.
I wonder if there is an adapter that changes USB 3 to USB 2? Maybe this could solve the problem?
Has anyone managed to get fastboot for any android phone working successfully on their Surface Pro?
Thanks in advance.
You could possibly try a USB 2.0 hub to degrade the USB 3 port to a USB 2 port.
netham45 said:
You could possibly try a USB 2.0 hub to degrade the USB 3 port to a USB 2 port.
Click to expand...
Click to collapse
Thanks for the reply, I've actually already tried that. It seems to me that Google need to update their SDK for USB 3.
ttiimm said:
Thanks for the reply, I've actually already tried that. It seems to me that Google need to update their SDK for USB 3.
Click to expand...
Click to collapse
I doubt that it is a USB 3.0 problem as I have USB 3.0 ports only on my laptop and have had fastboot working no problem, as well as adb for my nexus.
It sounds more like you are having driver problems and not usb port problems. I have not tried using fastboot yet on my win8 asus tablet but I should try that today.
goofball2k said:
I doubt that it is a USB 3.0 problem as I have USB 3.0 ports only on my laptop and have had fastboot working no problem, as well as adb for my nexus.
It sounds more like you are having driver problems and not usb port problems. I have not tried using fastboot yet on my win8 asus tablet but I should try that today.
Click to expand...
Click to collapse
Same thing on my Surface Pro. The problem lays in BOTH: the USB 3.0 driver and the Windows 8. There are tons of posts regarding not working many devices on USB 3.0 and Win8 (I'm not sure if it's only in x64 or x86 as well).
Anyway, I'm also stuck with not working fastboot (ADB works good). There is a tutorial how to install unsigned Intel driver but Microsoft's engineers geniuses didn't enabled USB keyboard in Startup Settings so I can't navigate and disable that specific option (I'm using 3rd party keyboard so I guess those morons punish me for that ).
Good morning
I tried updating the rom on my htc sensation and to do so i usualy have to flash the boot.img aswell to get rid of the infinite startup screen
but my device doesnt work anymore when im in the bootloader in fastboot mode on windows i get a message usb device malfunctioned
i know the usb works as when im booted up in my (previous rom) i can still send data from my pc to my phone over the usb cable
any ideas?
regards
frayful said:
Good morning
I tried updating the rom on my htc sensation and to do so i usualy have to flash the boot.img aswell to get rid of the infinite startup screen
but my device doesnt work anymore when im in the bootloader in fastboot mode on windows i get a message usb device malfunctioned
i know the usb works as when im booted up in my (previous rom) i can still send data from my pc to my phone over the usb cable
any ideas?
regards
Click to expand...
Click to collapse
Might be a driver issue. Can you try a different USB port?
Sent from my HTC Desire S using Tapatalk
Heya i tried different usb ports tried different cables and tried it on 2 other laptops aswell all gave the error usb device not recognized, device malfunctioned after like 10 seconds after being connected
regards
Which Windows do you have?
tested on 3 windows 8.1 pc's
frayful said:
tested on 3 windows 8.1 pc's
Click to expand...
Click to collapse
maybe you are facing now connectivity issues with w8
write in the search box "how to set up adb/fastboot in windows 8"
check some threads and see if you have any success
My motog USB port is not working. Unable to charge mobile using any of the USB cables. Only with wall charger its charging. Tried all the ways.
- safe mode
- restarted while connected to laptop
- Enabled usb Debugg
Please help me.
Thanks
Srikanth
You mean you can't use the usb port to transfer data?
audit13 said:
You mean you can't use the usb port to transfer data?
Click to expand...
Click to collapse
Both, not able to charge and no transfer of data.
I have installed motog drivers in laptop, still its not recognised.
Hello, I have a galaxy S6 where after restarting the factory settings stopped working the USB and Wifi. When I try to update the software via OTA I get the message "Your device has been modified. Software updates are not available".
I have already tried to connect it via USB in recovery mode and even then the device is not recognized on any computer. I also tried a new reset with wipe cache and wipe data but it does not resolve. Do you know any alternatives?
Note: The USB port normally charges and if I connect a pen drive via OTG I can copy data.
Install TWRP by USB from PC, and MTP in TWRP should work.
Tazerick said:
Install TWRP by USB from PC, and MTP in TWRP should work.
Click to expand...
Click to collapse
The problem is that USB is not recognized on the PC. The device only appears as charging.
dentepc said:
The problem is that USB is not recognized on the PC. The device only appears as charging.
Click to expand...
Click to collapse
Then you have broken USB port in phone or in cable.
Try another USB cable, if it's not working u have broken it in phone and there is nothing you can do about it expect a repair.
Tazerick said:
Then you have broken USB port in phone or in cable.
Try another USB cable, if it's not working u have broken it in phone and there is nothing you can do about it expect a repair.
Click to expand...
Click to collapse
The strange thing is: If I connect a pendrive in the device with the OTG cable I can see and copy files from the pendrive.