Hello, I have a galaxy S6 where after restarting the factory settings stopped working the USB and Wifi. When I try to update the software via OTA I get the message "Your device has been modified. Software updates are not available".
I have already tried to connect it via USB in recovery mode and even then the device is not recognized on any computer. I also tried a new reset with wipe cache and wipe data but it does not resolve. Do you know any alternatives?
Note: The USB port normally charges and if I connect a pen drive via OTG I can copy data.
Install TWRP by USB from PC, and MTP in TWRP should work.
Tazerick said:
Install TWRP by USB from PC, and MTP in TWRP should work.
Click to expand...
Click to collapse
The problem is that USB is not recognized on the PC. The device only appears as charging.
dentepc said:
The problem is that USB is not recognized on the PC. The device only appears as charging.
Click to expand...
Click to collapse
Then you have broken USB port in phone or in cable.
Try another USB cable, if it's not working u have broken it in phone and there is nothing you can do about it expect a repair.
Tazerick said:
Then you have broken USB port in phone or in cable.
Try another USB cable, if it's not working u have broken it in phone and there is nothing you can do about it expect a repair.
Click to expand...
Click to collapse
The strange thing is: If I connect a pendrive in the device with the OTG cable I can see and copy files from the pendrive.
Related
Hey Guys my a110 is not connecting to my pc as it keep throwing the "Usb Device Not Recognised" error Tried flashing to stock rom via cwm
and different cables
also the usb otg is not working
but the phone is charging when connected to pc or charger.
So I need to know if this is a Hardware issue or a software issue.
Please Guys help me out if anyone have similar problem plz share the solution.
try to connect in other laptop or after connecting go to device manager in usb ports it shows unknown device right click and uninstal the driver restart the system and connect thr phone it will detect and enable usb debuging in the phone setting developer option ok
gsunil said:
try to connect in other laptop or after connecting go to device manager in usb ports it shows unknown device right click and uninstal the driver restart the system and connect thr phone it will detect and enable usb debuging in the phone setting developer option ok
Click to expand...
Click to collapse
Done that but not luck
purely software problem try and same with another usb port
My Galaxy tab 2 P5100 has problem issue connect to my PC. When I plug in my USB cable to PC, there's no notification on my tab. But it's charging.
I've change setting USB debugging on my device and i've install the lastest Kies. I also try to another usb port of my PC.
I must connecting my tab to PC because I've factory reset and I want recovery my file such as photo,etc.
I need your help guys,, thank's before.
same issue here
riefhdyt said:
My Galaxy tab 2 P5100 has problem issue connect to my PC. When I plug in my USB cable to PC, there's no notification on my tab. But it's charging.
I've change setting USB debugging on my device and i've install the lastest Kies. I also try to another usb port of my PC.
I must connecting my tab to PC because I've factory reset and I want recovery my file such as photo,etc.
I need your help guys,, thank's before.
Click to expand...
Click to collapse
Same issue here, plus i have an error in recovery mode ''E: failed to mount sdcard, android secure'', with those 2 issues combined, my hands are tied, please help. I was rooted on 4.0.3 and tried to update on 4.2.2.
Hello
so any USB connection is not working on my LG 4X on fresh installed stock soft [4.1.2]. On PC i got message ,,failed to install MTP usb device'' etc
Also i dont know how to turn on debbuging mode, maybe this will help? I click 7 times on compilation version and all it do is some jelly on screen (?)
I tested 2 usb cables and all usb ports on my computer what to do now?
I also installed LG PC suite and LG usb drivers from LG site.
Please help guys i need to put some porn on my phone :/
refresh
donaspl said:
Hello
so any USB connection is not working on my LG 4X on fresh installed stock soft [4.1.2]. On PC i got message ,,failed to install MTP usb device'' etc
Also i dont know how to turn on debbuging mode, maybe this will help? I click 7 times on compilation version and all it do is some jelly on screen (?)
I tested 2 usb cables and all usb ports on my computer what to do now?
I also installed LG PC suite and LG usb drivers from LG site.
Please help guys i need to put some porn on my phone :/
Click to expand...
Click to collapse
Download your drivers here
Run the drivers
Reboot pc
For USB debugging check out this guide
Newyork! said:
Download your drivers here
Run the drivers
Reboot pc
For USB debugging check out this guide
Click to expand...
Click to collapse
I did this :/
donaspl said:
I did this :/
Click to expand...
Click to collapse
You have a few options on your phone when you connect the USB cable?
Newyork! said:
You have a few options on your phone when you connect the USB cable?
Click to expand...
Click to collapse
Yep : camera/MTP/pc suite/charging
But still i cant connect to PC by any way, of course charging work but nothing else.
donaspl said:
Yep : camera/MTP/pc suite/charging
But still i cant connect to PC by any way, of course charging work but nothing else.
Click to expand...
Click to collapse
Just to be on the safe side. Have you checked using another computer?
I cant try it on another computer right now :/
I got new cable and still when connect it via MTP i got information from PC suite i dont got this drivers :
http://www.microsoft.com/en-us/download/details.aspx?id=19289
But i cant install them... like i said “this update is not applicable to your computer”
And another info : when im trying to instal MTP drivers via lg pc suite i got error, even if device is disconnected.
Okey so on another computer also on windows 7 x64 usb connection working fine, so what the F... is the problem here?
My motog USB port is not working. Unable to charge mobile using any of the USB cables. Only with wall charger its charging. Tried all the ways.
- safe mode
- restarted while connected to laptop
- Enabled usb Debugg
Please help me.
Thanks
Srikanth
You mean you can't use the usb port to transfer data?
audit13 said:
You mean you can't use the usb port to transfer data?
Click to expand...
Click to collapse
Both, not able to charge and no transfer of data.
I have installed motog drivers in laptop, still its not recognised.
I recently rooted my s8+. Now when I connect it to my PC (or even my wife's PC), I get the following on my phone, "Attention: the connected device is unable to access data on this device. Please disconnect the USB cable and try again". I'm using the USB cable that came with my phone and the issue is happeing on 2 different PC's. I have USB debugging checked and set to MTP.
in settings, Switch on Developers options in configuratien. Then there is a USB modus setting. Set it to Charging rather then MTP Transfer.
try another USB cable and update the drivers in device manager.
jidamo said:
in settings, Switch on Developers options in configuratien. Then there is a USB modus setting. Set it to Charging rather then MTP Transfer.
try another USB cable and update the drivers in device manager.
Click to expand...
Click to collapse
Ok, I've tried your suggestions but the problem still persists. What's worse, I unrooted the phone and did a factory reset and it STILL is unable to access the data on the device.