Database Info

Unable to conect my tab to pc with legit asus cable.

Ics says nothing. JB says it charging lol.
With my usb data. It was connected succefully before. So i am clue less

Are you trying to connect to transfer files, sync outlook or issue ADB or APX commands?
Does your computer play the new hardware sound?
What OS is your computer running?
Do you have USB Debugging checked?
Have you tried another USB port on your computer?
Also, many of the JB ROMs show a charging indicator via USB even if it is not really charging.

frederuco said:
Are you trying to connect to transfer files, sync outlook or issue ADB or APX commands?
Does your computer play the new hardware sound?
What OS is your computer running?
Do you have USB Debugging checked?
Have you tried another USB port on your computer?
Also, many of the JB ROMs show a charging indicator via USB even if it is not really charging.
Click to expand...
Click to collapse
APX commands
No
OS: Windows 7 64 bit.
Yes, I haave checked
I have .... 9 usb ports. None of them works.
I did use other and it didnt work.
I will test on other pc's.

Are you sure you are getting it booted up into APX mode? I know it is a bit tricky to do.

frederuco said:
Are you sure you are getting it booted up into APX mode? I know it is a bit tricky to do.
Click to expand...
Click to collapse
I used my apx mode arround 2012 so i still have it and boot up.
As for cable they claim it's 40 pin ( my second non legemit cable).
I'm gonna test today on 2 pc's :3
Also i npotic my secondary cable has usb 3.0 + there is numbers of peopel has same PROBLEM! : http://forum.xda-developers.com/showthread.php?t=1913912

[Q] Bootloops when using OTG

Has anybody else connected via a USB OTG cable to a USB drive? I get stuck in bootloops both when running normally and in recovery mode. I thought this might be a better way to backup my storage since connecting via a USB cable to a computer takes a very long time.
Edit: Working now, seems that the S6 does not like the Stickmount app but supports OTG without an extra app.
Thanks

S6 does not work USB and Wifi. Can not update

Hello, I have a galaxy S6 where after restarting the factory settings stopped working the USB and Wifi. When I try to update the software via OTA I get the message "Your device has been modified. Software updates are not available".
I have already tried to connect it via USB in recovery mode and even then the device is not recognized on any computer. I also tried a new reset with wipe cache and wipe data but it does not resolve. Do you know any alternatives?
Note: The USB port normally charges and if I connect a pen drive via OTG I can copy data.

Install TWRP by USB from PC, and MTP in TWRP should work.

Tazerick said:
Install TWRP by USB from PC, and MTP in TWRP should work.
Click to expand...
Click to collapse
The problem is that USB is not recognized on the PC. The device only appears as charging.

dentepc said:
The problem is that USB is not recognized on the PC. The device only appears as charging.
Click to expand...
Click to collapse
Then you have broken USB port in phone or in cable.
Try another USB cable, if it's not working u have broken it in phone and there is nothing you can do about it expect a repair.

Tazerick said:
Then you have broken USB port in phone or in cable.
Try another USB cable, if it's not working u have broken it in phone and there is nothing you can do about it expect a repair.
Click to expand...
Click to collapse
The strange thing is: If I connect a pendrive in the device with the OTG cable I can see and copy files from the pendrive.

Rooted now windows 10 doesn't recognize device

I recently rooted my s8+. Now when I connect it to my PC (or even my wife's PC), I get the following on my phone, "Attention: the connected device is unable to access data on this device. Please disconnect the USB cable and try again". I'm using the USB cable that came with my phone and the issue is happeing on 2 different PC's. I have USB debugging checked and set to MTP.

in settings, Switch on Developers options in configuratien. Then there is a USB modus setting. Set it to Charging rather then MTP Transfer.
try another USB cable and update the drivers in device manager.

jidamo said:
in settings, Switch on Developers options in configuratien. Then there is a USB modus setting. Set it to Charging rather then MTP Transfer.
try another USB cable and update the drivers in device manager.
Click to expand...
Click to collapse
Ok, I've tried your suggestions but the problem still persists. What's worse, I unrooted the phone and did a factory reset and it STILL is unable to access the data on the device.

PC doesn't detect phone?

Hey everyone, all of a sudden my PC no longer detects my phone? It use to detect it with usb debugging with no problems but out of no where just doesn't detect it anymore? It just charges it with no debugging options?

valeriee said:
Hey everyone, all of a sudden my PC no longer detects my phone? It use to detect it with usb debugging with no problems but out of no where just doesn't detect it anymore? It just charges it with no debugging options?
Click to expand...
Click to collapse
I have the same issue on Windows 10.

valeriee said:
Hey everyone, all of a sudden my PC no longer detects my phone? It use to detect it with usb debugging with no problems but out of no where just doesn't detect it anymore? It just charges it with no debugging options?
Click to expand...
Click to collapse
Have you found a fix for this yet?

I heard try using a USB 2.0 port and original cable.

Bradl79 said:
I heard try using a USB 2.0 port and original cable.
Click to expand...
Click to collapse
Thanks for the tip, I'll give it a try. So wired though that it would just change randomly like that.

Bradl79 said:
I heard try using a USB 2.0 port and original cable.
Click to expand...
Click to collapse
That didn't work