Hi,
from Yandex..
https://downloader.disk.yandex.ru/d...f28d6c3c06df2d4&media_type=compressed&tknv=v2
Or:
https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/MX/dmcu
Edit:
I have just reflash it my headunit back from mx-3.00 to the mx2 (3.00) version, to the original mx2 version as it was when I bought it, you must choose and do the wipe thing otherwise the head unit will not be start but keep showing the car logo.. in case you would to go back to your mx2 version ofcourse.
People, dont do the above, use the latest MCU version or cross compatible HA or GS MCU.
The MCU is not android and would never require a wipe.
when the adult men talk about logic..
Hi Guys.. do not pay any attention to such reply at all,
I'm gonna explain it to you guys why i'm Wright and that guy is absolutely Wrong!.. please read it very curfely twice..
firstly, I am the one who has this mx2 headunit,
secondly, I am the one who flashed and tested it both version mx+mx2 already,
thirdly, if you do not have mx / mx2 headunit and also you didn't test it (mx/mx2) why did you write a reply back than?
aha, to warn the guys I heard you say? again, first you should Test things and only than say (reply) something useful back..
nobody has asked for your opinion! learn first to read carefully (twice!) and only then write something useful back when it concerns to your own head unit only and if you already have a mx-mx2 headuint and if you have tested it already and your head unit went broke (brick) you have all the right to warn the "people" as you called them.. right?
Very important..
I've written too clearly that I already have an mx2 headunit,
and then I got a mx version (3.00) from my seller and I flashed it with it On My Own mx2 headunit and it went ok so nothing went wrong or defective or damaged my own headunit or something like that at all,
and now I want to go back to the original mx2 version which I already have and did in the meantime.. is there something wrong with it?
Again..
first and only if you have the same headunit with mx / mx2 version and then Only then you have the right to say something useful to the guys back, other than that your reply will literally fall under stupid reply: sucked out of his thumb.
I never need or asked your comment because I want to spend my free time on something useful than on stupid answers/reply's.
Ps: when guys flash them headunit's with custom roms or with this or that custom things there is "sometimes some risk.. Only 2 in 5 long years bricked them headunits and they fixed it back!!" of being damaged (bricked) and that what malay and also hal9 has write it on their first page: Flash It At Your Own Risk.
But if one of the headunits of the guys went broke/brick after flashing this mcu file on his own mx or mx2, I will pay for a newer "motherboard"... a'm I too Clear now!?!
end of story.. some guy let even an old horse laugh.. hahaha.
Thanks you guys for reading!
Can i ask which is better or newer mx or mx2..?
Or which the difference between them?
Thanks.
niufy said:
Can i ask which is better or newer mx or mx2..?
Or which the difference between them?
Thanks.
Click to expand...
Click to collapse
As far as I know, the only difference are the car-logos, which are shown during the bootup process.
I flashed from mx to mx2 and my Citroen-carlogo is still there, but I cannot chose another one inside the factory-settings.
Correct MX is with car logos and MX2 isnt.
The newest MX version is 3.08. and MX2 is 3.13.
LinkseD said:
Correct MX is with car logos and MX2 isnt.
The newest MX version is 3.08. and MX2 is 3.13.
Click to expand...
Click to collapse
Are you sure that latest MX is 3.08?
I got MX 3.12_1
https://pasteboard.co/IfCoiuj.png
Basoda said:
Are you sure that latest MX is 3.08?
I got MX 3.12_1
https://pasteboard.co/IfCoiuj.png
Click to expand...
Click to collapse
Yes, there is no official place to download those MCU files.
Every file we have here for download is only made accessible by asking the vendor/dealer of the headunits.
So someone should ask Bob from Witson again. ?
Basoda said:
Are you sure that latest MX is 3.08?
I got MX 3.12_1
https://pasteboard.co/IfCoiuj.png
Click to expand...
Click to collapse
Could you upload this one?
LinkseD said:
Could you upload this one?
Click to expand...
Click to collapse
Hello,
today I get new MTCE_MX_V3.13（with logo）.
https://yadi.sk/d/y5y4YAFgfVs05g
MTCE_MX_V3.17（with LOGO)
Hello... I get it today and share with you gays..
I would say its pretty old (like 2 or 3 weeks) since its been uploaded to the yandex server.
LinkseD said:
I would say its pretty old (like 2 or 3 weeks) since its been uploaded to the yandex server.
Click to expand...
Click to collapse
sorry i see only 3.13 on server: https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/MX/dmcu
maybe you have other server?
ennysubo said:
sorry i see only 3.13 on server: https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/MX/dmcu
maybe you have other server?
Click to expand...
Click to collapse
Yeah could be, nevertheless your link is not working
LinkseD said:
Yeah could be, nevertheless your link is not working
Click to expand...
Click to collapse
https://yadi.sk/d/4znpi5t3FLIC1g
Hi,
Did you know if there is a new version ?
If not, could you upload the last again (all links are dead )
Tks
Mtce_mx_v3.37(with logo)
fquillerier said:
Hi,
Did you know if there is a new version ?
If not, could you upload the last again (all links are dead )
Tks
Click to expand...
Click to collapse
https://yadi.sk/d/2RS7F74ZOtKg0Q
Related
MTCD Oreo ROM Extract/Dump is here: ROM
An example of XDA teamwork - Thanks to:
@ikerg
@xdamember2 @RedScorpioXDA
@kumarai
Solution see post 159, thanks @kumarai
Process video again thanks to @kumarai
- note the approx 5 minutes of grey screen before "erase" is seen, proceeding first SDCard install of android 8 recovery files.
Team effort. Noted no BT with wd725 (integrated wifi/bt.)
Technical details of the 'Upgrade" - maybe useful in other upgrade scenarios:
- The Android 6 [update.img] [miniloaderall.bin] has been replaced with the Oreo [miniloaderall.bin] from the Oreo OTG ROM Extract.
- The modifed Android 6 update image is used to create a bootable SDCARD. containing the the Oreo Miniloader.
- SDCARD flashes the OREO Recovery images to NAND.
- With Oreo Recovery installed, .ZIP upgrade images can be installed.
Hi,
With resellers not proving a PX5 Oreo ROM image and no other member having OTG and as I have OTG and the jig/tools I could provide a ROM extract if the community provides a PX5 Oreo core board or complete unit.
Any supporters for either loaning a PX5 Oreo SOM or funding a complete unit?
If loaned I would extract ROM and return SOM within 2 days.
marchnz said:
Hi,
With resellers not proving a PX5 Oreo ROM image and no other member having OTG and as I have OTG and the jig/tools I could provide a ROM extract if the community provides a PX5 Oreo core board or complete unit.
Any supporters for either loaning a PX5 Oreo SOM or funding a complete unit?
If loaned I would extract ROM and return SOM within 2 days.
Click to expand...
Click to collapse
I will likely be able to loan a unit or SOM within a week or so. I noticed the SOM rev 8 (used in the Oreo hu) has more header pins than the earlier version though some may be blank. Is your hardware compatible?
A ROM Image has been availible here for almost a week now.
https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Psycho Dave said:
A ROM Image has been availible here for almost a week now.
https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Click to expand...
Click to collapse
Unfortunately, not. It is an OTA/zip upgrade and not an IMG.
xdamember2 said:
I will likely be able to loan a unit or SOM within a week or so. I noticed the SOM rev 8 (used in the Oreo hu) has more header pins than the earlier version though some may be blank. Is your hardware compatible?
Click to expand...
Click to collapse
Thanks, who is manufacturer, HCT or Joyings STT?
Are you able to post JPGs?
marchnz said:
Thanks, who is manufacturer, HCT or Joyings STT?
Are you able to post JPGs?
Click to expand...
Click to collapse
It should be compatible since HA has offered me an Octacore 4 gb RAM SOM to upgrade my 2 gb HU to Android 8.
Oberbergler said:
It should be compatible since HA has offered me an Octacore 4 gb RAM SOM to upgrade my 2 gb HU to Android 8.
Click to expand...
Click to collapse
I can post jpegs however the unit is currently installed. The rom is hct, the mcu is gs and the SOM is hct . I should receive another presumably identical hu today.
marchnz said:
Thanks, who is manufacturer, HCT or Joyings STT?
Are you able to post JPGs?
Click to expand...
Click to collapse
Here is the SOM and mainboard.
https://s.amsu.ng/mtYfNnUStbhN
xdamember2 said:
Here is the SOM and mainboard.
https://s.amsu.ng/mtYfNnUStbhN
Click to expand...
Click to collapse
Thanks - unit is an MTCD (possibly GS) with HCT SOM.
xdamember2 said:
Here is the SOM and mainboard.
https://s.amsu.ng/mtYfNnUStbhN
Click to expand...
Click to collapse
Can you post again ? - The link has expired already
marchnz said:
Thanks - unit is an MTCD (possibly GS) with HCT SOM.
Click to expand...
Click to collapse
I ve never seen an MTC SoM that isnt made by HCT.
typos1 said:
Can you post again ? - The link has expired already
I ve never seen an MTC SoM that isnt made by HCT.
Click to expand...
Click to collapse
Here's a new link.
https://s.amsu.ng/m6vqXHrYS5gN
This one is also very temporary.
---------- Post added at 05:45 PM ---------- Previous post was at 05:42 PM ----------
marchnz said:
Thanks - unit is an MTCD (possibly GS) with HCT SOM.
Click to expand...
Click to collapse
Would you pm me your shipping address or postal code, and I'll check the rates?
xdamember2 said:
Here's a new link.
https://s.amsu.ng/m6vqXHrYS5gN
This one is also very temporary.
Click to expand...
Click to collapse
Thanks, dont want to sound ungrateful but have you got a higher resolution ? Its so low that you cant make out anything.
typos1 said:
Thanks, dont want to sound ungrateful but have you got a higher resolution ? Its so low that you cant make out anything.
Click to expand...
Click to collapse
I'm a bit new to this. I see when I click the link there's an image and also a "download" button. If I download there's a jpeg sharp enough to read the silkscreen. (Unless Samsung is only allowing downloads to Samsungs?) I took the pic with my cellphone, I could also do one on the dslr.
typos1 said:
Thanks, dont want to sound ungrateful but have you got a higher resolution ? Its so low that you cant make out anything.
Click to expand...
Click to collapse
I zipped the pic and now I should be able to attach it directly. Please let me know if higher res is required.
Does anyone know if the interface board provides better (i.e. multiple) USB ports now (i.e. not a single USB port split with a hub), and/or if the USB is better than the prior USB speed and power provided?
Ditto -- now Bluetooth 5.0?
xdamember2 said:
I zipped the pic and now I should be able to attach it directly. Please let me know if higher res is required.
Click to expand...
Click to collapse
Thanks.
So it is HCT PX5 SoM Rev8.0 Designed 2017-06-09 Interesting.
It looks like targeted at 8.0 Beta 2 time SoM prototype rushed into manufacturing?
PekeMM said:
It looks like targeted at 8.0 Beta 2 time SoM prototype rushed into manufacturing?
Click to expand...
Click to collapse
Why would you say that ? My MM 4Gb RK3368/PX5 SoM is also rev8.0.
@marchnz you could try using MTCD ROM Builder (here, needs a Linux machine : https://forum.xda-developers.com/an...re-development/tool-mtcd-rom-builder-t3475444 ) to make an image using the files in the zip. Theres the option to use FUSE which may get a round any partitioning problems.
I use Linux so I can make an image if youve got somewhere I can upload it to.
Maybe I ll try it myself, its just the hassle of trying to unbrick it if it bricks.
EDIT: just re read that thread and see youve already posted in it and used it on your RK3368/PX5, not sure it would work anyway as I think it requires a proper image already, dont think it can make one from separate images.
typos1 said:
Why would you say that ? My MM 4Gb RK3368/PX5 SoM is also rev8.0.
@marchnz you could try using MTCD ROM Builder (here, needs a Linux machine : https://forum.xda-developers.com/an...re-development/tool-mtcd-rom-builder-t3475444 ) to make an image using the files in the zip. Theres the option to use FUSE which may get a round any partitioning problems.
I use Linux so I can make an image if youve got somewhere I can upload it to.
Maybe I ll try it myself, its just the hassle of trying to unbrick it if it bricks.
EDIT: just re read that thread and see youve already posted in it and used it on your RK3368/PX5, not sure it would work anyway as I think it requires a proper image already, dont think it can make one from separate images.
Click to expand...
Click to collapse
To create the image we need the partition addresses....so..unless we got an update with the classic .img or we could dump it from an already MTCD px5 under android 8.
I am going to receive a 4gb/32 px5 board with preinstalled android 8...but I don't know how to do for my pc to recognize it in order to dump the software...(I did before for android tv under rk3288)
Any suggestion?
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
To create the image we need the partition addresses....so..unless we got an update with the classic .img or we could dump it from an already MTCD px5 under android 8.
I am going to receive a 4gb/32 px5 board with preinstalled android 8...but I don't know how to do for my pc to recognize it in order to dump the software...(I did before for android tv under rk3288)
Any suggestion?
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
But would we need the partition addresses if we create a FUSE ROM ? - MTCD ROM Builder will make one big partition surely ?
I could try using an MM RK3368/PX5 image and adding the separate images from the Oreo update.zip.
Hi Mates,
May (07-05-2019) version.. Bug Time is Fixed!
ui_print("Target: rockchip/rk3368/rk3368:9/PQ2A. 190305.002/hct05 07 1845:userdebug/test-keys");
DL: https://yadi.sk/d/tyLXd4E-xXeylQ ... incl. gift!
Ps: mates, don't mention my gift to you here pls!!
Success
Edit:
I can now certainly say that the time is running 100% good.. finally!
UI.. is "ugly" and not a nice ordered or made.
Dasaita (HA) from a new software
I've installed it on my unit now. I'il write the test results tomorrow.A few screenshots.
HA_px5_9.0_ota(20190521)
https://yadi.sk/d/qCYey1V8HRLL4Q
zeyret said:
Dasaita (HA) from a new software
I've installed it on my unit now. I'il write the test results tomorrow.A few screenshots.
HA_px5_9.0_ota(20190521)
https://yadi.sk/d/qCYey1V8HRLL4Q
Click to expand...
Click to collapse
Hi mate,
I have just finished installing that fw and you are now coming with a newer one? hahaha.. a bit too late for me unfortunately, arkadas, now have no time for it.. maybe tomorrow after 10 pm? will see if I have the senses to do.. it takes me 3 hours because of my weak wifi router.. distance between car and home wifi about 150mtr.
Thanks for the share & info mate!
Seicane-Misery said:
Hi Mates,
This May (07-05-2019) version of Android 9 for our px5 headunits, I can guarantee / certainly say now that the time bug is 100% fixed.. as I hoped, finally!!
UI.. is "ugly" and not pretty ordered or made.
Click to expand...
Click to collapse
Just to let you know mates.
zeyret said:
Dasaita (HA) from a new software
I've installed it on my unit now. I'il write the test results tomorrow.A few screenshots.
HA_px5_9.0_ota(20190521)
https://yadi.sk/d/qCYey1V8HRLL4Q
Click to expand...
Click to collapse
Hi Arkadas,
why not update your mcu with the sp mod one? it gives the best sound possible from your car speakers i.c.w with Eqfy Equalizer v1.1.4.apk.. 100% for sure, I use it here myself too and we both have the same MX version headunit, so I would update it too quickly to the sp mod version if I you was, and you will notice the difference in the sound quality 100% audible.
Sp mcu mods: https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig .. take yours from there mate!
Ps: I can guarantee / certainly say now that the time bug is 100% fixed with yours too, I have already test it / installed & uses it at this moment too!!
Seicane-Misery said:
Hi Arkadas,
why not update your mcu with the sp mod one? it gives the best sound possible from your car speakers i.c.w with Eqfy Equalizer v1.1.4.apk.. 100% for sure, I use it here myself too and we both have the same MX version headunit, so I would update it too quickly to the sp mod version if I you was, and you will notice the difference in the sound quality 100% audible.
Sp mcu mods: https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig .. take yours from there mate!
Ps: I can guarantee / certainly say now that the time bug is 100% fixed with yours too, I have already test it / installed & uses it at this moment too!!
Click to expand...
Click to collapse
Hi mate
Thank you for your suggestion. Sometimes I use this version. MTCE_MX_V3.08bd
zeyret said:
Hi mate
Thank you for your suggestion. Sometimes I use this version. MTCE_MX_V3.08bd
Click to expand...
Click to collapse
Hi mate,
that what I thought, but.. just try this time that one (sp mod) with the mentioned Eq 1.1.4 and you won't regret it, just try it mate and than let me know if you like it or not, read how you should set it (by clicking on his ... dot) from my other post!
Success
zeyret said:
Dasaita (HA) from a new software
I've installed it on my unit now. I'il write the test results tomorrow.A few screenshots.
HA_px5_9.0_ota(20190521)
https://yadi.sk/d/qCYey1V8HRLL4Q
Click to expand...
Click to collapse
RK3368 is a octa-core cpu, RK3399 is a six core, why your system info report rk3368 with 6 core cpu? Why this mix info from px5-px6?
zeyret said:
Dasaita (HA) from a new software
I've installed it on my unit now. I'il write the test results tomorrow.A few screenshots.
HA_px5_9.0_ota(20190521)
https://yadi.sk/d/qCYey1V8HRLL4Q
Click to expand...
Click to collapse
hello are you using the same tape as i have had trouble installing software the screen is completely gone Is there a way to recover it.
merhaba sizinle aynı teyp kullanıyoruz ben yazılım yüklerken sıkıntı oldu ekran tamamen gitti bunu kurtarmanın bir yolu varmı
Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.
LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...
themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!
I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
DEar forum users,
I have a strange problem. I uploaded a video to my channel. Could you please help me identify the problem? I wrote English subtitle for those who is willing to help. Please watch it in youtube so you can read subtitles.
Best regards.
Is it an MTCD/ E device
marchnz said:
Is it an MTCD/ E device
Click to expand...
Click to collapse
Yes.
necroshine1983 said:
Yes.
Click to expand...
Click to collapse
Post MCU version.
marchnz said:
Post MCU version.
Click to expand...
Click to collapse
Sure , please look at attachments.
Try updating the mcu, your version is old.
I am editing my questions, sorry about that:
*i see the newest version of mcus for MX is V.373
Can i upgrade my MCU to latest version, without upgrading my Android?
can i return back to the old mcu if there is a problem?
necroshine1983 said:
I am editing my questions, sorry about that:
*i see the newest version of mcus for MX is V.373
Can i upgrade my MCU to latest version, without upgrading my Android?
can i return back to the old mcu if there is a problem?
Click to expand...
Click to collapse
1. Yes.
2. Yes.
Be sure to document your factory settings and export your current factory settings configuration.
marchnz said:
1. Yes.
2. Yes.
Be sure to document your factory settings and export your current factory settings configuration.
Click to expand...
Click to collapse
OK. I upgraded my mcu to latest one 3.73. Problem still arrives. Tried 3.30sp, nothing changed. I think it is not related with mcu files.
I have another question, how do i check if my device has DSP controller.
One last thing, how can i remove my HU. I cannot pull it out from my car
Hi!
Can someone share dmcu.cfg of a unit with HXD mcu?
I changed mcu without import config file and now i can't go back to original MCU.
Thanks a lot!
What are you wanting to solve
marchnz said:
What are you wanting to solve
Click to expand...
Click to collapse
I got version unmatch-01, and there's no way to solve, i tried to solve coming back to original MCU, but i don't have the same version as original i had.
jack43 said:
I got version unmatch-01, and there's no way to solve, i tried to solve coming back to original MCU, but i don't have the same version as original i had.
Click to expand...
Click to collapse
There is and there are posts about how to deal with it
marchnz said:
There is and there are posts about how to deal with it
Click to expand...
Click to collapse
I know, i read a lot of post and i tried different ways, but without results.
jack43 said:
I know, i read a lot of post and i tried different ways, but without results.
Click to expand...
Click to collapse
Solution for 'Version unmatch' (I hope final)
I know that this topic has already been discussed many times in many threads (most in MTCD - Verified Cross compatible MCUs). I also know that there is a known solution to this problem. However, there are users who report that they still have a...
forum.xda-developers.com
Pavel-71 said:
Solution for 'Version unmatch' (I hope final)
I know that this topic has already been discussed many times in many threads (most in MTCD - Verified Cross compatible MCUs). I also know that there is a known solution to this problem. However, there are users who report that they still have a...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried the app, but it doesn't work in android 10.
jack43 said:
I tried the app, but it doesn't work in android 10.
Click to expand...
Click to collapse
Strange on Thursday it worked on android 10. One specialist installed HF instead of HT and fixed it, try the app from here or try another update, what did you originally have?
Яндекс
Найдётся всё
disk.yandex.ru
Pumpkin Android 10 PX5 MTCE Problem
Hi there, i have a pumpkin Android 10 PX5 device, if i want to install a radio app from store or some other apps nothing will work ... so i decided to install the "Magic" version from this forum, it work´s wery well ... but NOW i have a red...
forum.xda-developers.com
Pavel-71 said:
Strange on Thursday it worked on android 10. One specialist installed HF instead of HT and fixed it, try the app from here or try another update, what did you originally have?
Яндекс
Найдётся всё
disk.yandex.ru
Pumpkin Android 10 PX5 MTCE Problem
Hi there, i have a pumpkin Android 10 PX5 device, if i want to install a radio app from store or some other apps nothing will work ... so i decided to install the "Magic" version from this forum, it work´s wery well ... but NOW i have a red...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried this app too, and crashes on start, like the others. I originally had HXD v3.71_1.
jack43 said:
I tried this app too, and crashes on start, like the others. I originally had HXD v3.71_1.
Click to expand...
Click to collapse
Try these, I couldn't find any others:
MTCE_HXD.rar
drive.google.com
Pavel-71 said:
Try these, I couldn't find any others:
MTCE_HXD.rar
drive.google.com
Click to expand...
Click to collapse
I tried these all, but with the same result...
jack43 said:
I tried the app, but it doesn't work in android 10.
Click to expand...
Click to collapse
fix it using the steps in the thread to work on a10.