Database Info

Mtce_mx2_v3.00

Hi,
from Yandex..
https://downloader.disk.yandex.ru/d...f28d6c3c06df2d4&media_type=compressed&tknv=v2
Or:
https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/MX/dmcu
Edit:
I have just reflash it my headunit back from mx-3.00 to the mx2 (3.00) version, to the original mx2 version as it was when I bought it, you must choose and do the wipe thing otherwise the head unit will not be start but keep showing the car logo.. in case you would to go back to your mx2 version ofcourse.

People, dont do the above, use the latest MCU version or cross compatible HA or GS MCU.
The MCU is not android and would never require a wipe.

when the adult men talk about logic..
Hi Guys.. do not pay any attention to such reply at all,
I'm gonna explain it to you guys why i'm Wright and that guy is absolutely Wrong!.. please read it very curfely twice..
firstly, I am the one who has this mx2 headunit,
secondly, I am the one who flashed and tested it both version mx+mx2 already,
thirdly, if you do not have mx / mx2 headunit and also you didn't test it (mx/mx2) why did you write a reply back than?
aha, to warn the guys I heard you say? again, first you should Test things and only than say (reply) something useful back..
nobody has asked for your opinion! learn first to read carefully (twice!) and only then write something useful back when it concerns to your own head unit only and if you already have a mx-mx2 headuint and if you have tested it already and your head unit went broke (brick) you have all the right to warn the "people" as you called them.. right?
Very important..
I've written too clearly that I already have an mx2 headunit,
and then I got a mx version (3.00) from my seller and I flashed it with it On My Own mx2 headunit and it went ok so nothing went wrong or defective or damaged my own headunit or something like that at all,
and now I want to go back to the original mx2 version which I already have and did in the meantime.. is there something wrong with it?
Again..
first and only if you have the same headunit with mx / mx2 version and then Only then you have the right to say something useful to the guys back, other than that your reply will literally fall under stupid reply: sucked out of his thumb.
I never need or asked your comment because I want to spend my free time on something useful than on stupid answers/reply's.
Ps: when guys flash them headunit's with custom roms or with this or that custom things there is "sometimes some risk.. Only 2 in 5 long years bricked them headunits and they fixed it back!!" of being damaged (bricked) and that what malay and also hal9 has write it on their first page: Flash It At Your Own Risk.
But if one of the headunits of the guys went broke/brick after flashing this mcu file on his own mx or mx2, I will pay for a newer "motherboard"... a'm I too Clear now!?!
end of story.. some guy let even an old horse laugh.. hahaha.
Thanks you guys for reading!

Can i ask which is better or newer mx or mx2..?
Or which the difference between them?
Thanks.

niufy said:
Can i ask which is better or newer mx or mx2..?
Or which the difference between them?
Thanks.
Click to expand...
Click to collapse
As far as I know, the only difference are the car-logos, which are shown during the bootup process.
I flashed from mx to mx2 and my Citroen-carlogo is still there, but I cannot chose another one inside the factory-settings.

Correct MX is with car logos and MX2 isnt.
The newest MX version is 3.08. and MX2 is 3.13.

LinkseD said:
Correct MX is with car logos and MX2 isnt.
The newest MX version is 3.08. and MX2 is 3.13.
Click to expand...
Click to collapse
Are you sure that latest MX is 3.08?
I got MX 3.12_1
https://pasteboard.co/IfCoiuj.png

Basoda said:
Are you sure that latest MX is 3.08?
I got MX 3.12_1
https://pasteboard.co/IfCoiuj.png
Click to expand...
Click to collapse
Yes, there is no official place to download those MCU files.
Every file we have here for download is only made accessible by asking the vendor/dealer of the headunits.
So someone should ask Bob from Witson again. ?

Basoda said:
Are you sure that latest MX is 3.08?
I got MX 3.12_1
https://pasteboard.co/IfCoiuj.png
Click to expand...
Click to collapse
Could you upload this one?

LinkseD said:
Could you upload this one?
Click to expand...
Click to collapse
Hello,
today I get new MTCE_MX_V3.13（with logo）.
https://yadi.sk/d/y5y4YAFgfVs05g

MTCE_MX_V3.17（with LOGO)
Hello... I get it today and share with you gays..

I would say its pretty old (like 2 or 3 weeks) since its been uploaded to the yandex server.

LinkseD said:
I would say its pretty old (like 2 or 3 weeks) since its been uploaded to the yandex server.
Click to expand...
Click to collapse
sorry i see only 3.13 on server: https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/MX/dmcu
maybe you have other server?

ennysubo said:
sorry i see only 3.13 on server: https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/MX/dmcu
maybe you have other server?
Click to expand...
Click to collapse
Yeah could be, nevertheless your link is not working

LinkseD said:
Yeah could be, nevertheless your link is not working
Click to expand...
Click to collapse
https://yadi.sk/d/4znpi5t3FLIC1g

Hi,
Did you know if there is a new version ?
If not, could you upload the last again (all links are dead )
Tks

Mtce_mx_v3.37(with logo)
fquillerier said:
Hi,
Did you know if there is a new version ?
If not, could you upload the last again (all links are dead )
Tks
Click to expand...
Click to collapse
https://yadi.sk/d/2RS7F74ZOtKg0Q

I need recovery.img file for my mtcd please

Hi
I need recovery.img file for my mtcd
it is RM h-772
android px5-userdebug 6.0.1 MXC89L
A-MEDIA AUTO (1024x600 O)
Kernel versio
3.10.0
[email protected] #1294
the attached image is for my recovery screen before I deleted it
Thanks

sa3aad said:
Hi
I need recovery.img file for my mtcd
it is RM h-772
android px5-userdebug 6.0.1 MXC89L
A-MEDIA AUTO (1024x600 O)
Kernel versio
3.10.0
[email protected] #1294
the attached image is for my recovery screen before I deleted it
Thanks
Click to expand...
Click to collapse
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 6.1

The link have many different MTCE GS,HA,KGL,KLD,LM,MX,XRC.
which one should i choose?
My MCU is MTCE_CZ_V2.77
ennysubo said:
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 6.1
Click to expand...
Click to collapse

vegechuang said:
The link have many different MTCE GS,HA,KGL,KLD,LM,MX,XRC.
which one should i choose?
My MCU is MTCE_CZ_V2.77
Click to expand...
Click to collapse
You can use any of then. I recommend MX or HA.

ennysubo said:
You can use any of then. I recommend MX or HA.
Click to expand...
Click to collapse
No! Why do you write such false statements? He must take MTCE_CZ!
Please edit your comment.

Thanks for your mention,
Does anyone could offer me the right recovery.img?
Ati_gangster said:
No! Why do you write such false statements? He must take MTCE_CZ!
Please edit your comment.
Click to expand...
Click to collapse

Ati_gangster said:
No! Why do you write such false statements? He must take MTCE_CZ!
Please edit your comment.
Click to expand...
Click to collapse
This guy not found mcu but recovery image. MCU must be CZ recovery image can use any of android 6.
I have a PX5 MX android 6(original) device. On this device I have tried all versions of android 6,,8 and now already 9. I tried image from HA, GS, CHS and many others. Everything is made from the original version with pre-application and changed theme.

ennysubo said:
This guy not found mcu but recovery image. MCU must be CZ recovery image can use any of android 6.
I have a PX5 MX android 6(original) device. On this device I have tried all versions of android 6,,8 and now already 9. I tried image from HA, GS, CHS and many others. Everything is made from the original version with pre-application and changed theme.
Click to expand...
Click to collapse
I'm aware of that. But you've written it so that they're all fully compatible, so software and MCU, and they're not. There are many here who can misunderstand that.
Software yes.
MCU must correspond to the respective manufacturer.

Hi,
I have an Eonon GA9156A.
The original data was:
Build:
px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20180522.143630 test-key
MCU Version:
MTCE_WWW_V20.85d_1
May 21 2018 18:13:41
Model
px5(1024x600)
I've installed the Hal9k (8.0) Rom and all was ok.
I've tryed to update to the Malaysk 9.0 Rom but someting was wrong. The recovery isn't installed correctely and the system not booting on.
Someone could tell me what is the correct recovery for my device?
Please send me also a guide to competely restore the radio.
Thanks

Razzox said:
Hi,
I have an Eonon GA9156A.
The original data was:
Build:
px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20180522.143630 test-key
MCU Version:
MTCE_WWW_V20.85d_1
May 21 2018 18:13:41
Model
px5(1024x600)
I've installed the Hal9k (8.0) Rom and all was ok.
I've tryed to update to the Malaysk 9.0 Rom but someting was wrong. The recovery isn't installed correctely and the system not booting on.
Someone could tell me what is the correct recovery for my device?
Please send me also a guide to competely restore the radio.
Thanks
Click to expand...
Click to collapse
Follow this instruction.
https://youtu.be/34GSX5aId8Q

Ati_gangster said:
Follow this instruction.
https://youtu.be/34GSX5aId8Q
Click to expand...
Click to collapse
Thank you. I've resolved.

hello everyone sorry for my appoximative English, I have an Amedia car radio mtcd_lm in my bmw x5 e53, I updated with a bad file and since the steering wheel controls no longer work ....
everything else works perfectly.
would be really nice to help me!
I no longer remember the version I had of origin it was mtcd_lm v ????

Seicane PX5 MTCP_HF MCU file wanted

Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.

LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...

themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!

I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).

Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk

Need dmcu.cfg HXD unit

Hi!
Can someone share dmcu.cfg of a unit with HXD mcu?
I changed mcu without import config file and now i can't go back to original MCU.
Thanks a lot!

What are you wanting to solve

marchnz said:
What are you wanting to solve
Click to expand...
Click to collapse
I got version unmatch-01, and there's no way to solve, i tried to solve coming back to original MCU, but i don't have the same version as original i had.

jack43 said:
I got version unmatch-01, and there's no way to solve, i tried to solve coming back to original MCU, but i don't have the same version as original i had.
Click to expand...
Click to collapse
There is and there are posts about how to deal with it

marchnz said:
There is and there are posts about how to deal with it
Click to expand...
Click to collapse
I know, i read a lot of post and i tried different ways, but without results.

jack43 said:
I know, i read a lot of post and i tried different ways, but without results.
Click to expand...
Click to collapse
Solution for 'Version unmatch' (I hope final)
I know that this topic has already been discussed many times in many threads (most in MTCD - Verified Cross compatible MCUs). I also know that there is a known solution to this problem. However, there are users who report that they still have a...
forum.xda-developers.com

Pavel-71 said:
Solution for 'Version unmatch' (I hope final)
I know that this topic has already been discussed many times in many threads (most in MTCD - Verified Cross compatible MCUs). I also know that there is a known solution to this problem. However, there are users who report that they still have a...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried the app, but it doesn't work in android 10.

jack43 said:
I tried the app, but it doesn't work in android 10.
Click to expand...
Click to collapse
Strange on Thursday it worked on android 10. One specialist installed HF instead of HT and fixed it, try the app from here or try another update, what did you originally have?
Яндекс
Найдётся всё
disk.yandex.ru
Pumpkin Android 10 PX5 MTCE Problem
Hi there, i have a pumpkin Android 10 PX5 device, if i want to install a radio app from store or some other apps nothing will work ... so i decided to install the "Magic" version from this forum, it work´s wery well ... but NOW i have a red...
forum.xda-developers.com

Pavel-71 said:
Strange on Thursday it worked on android 10. One specialist installed HF instead of HT and fixed it, try the app from here or try another update, what did you originally have?
Яндекс
Найдётся всё
disk.yandex.ru
Pumpkin Android 10 PX5 MTCE Problem
Hi there, i have a pumpkin Android 10 PX5 device, if i want to install a radio app from store or some other apps nothing will work ... so i decided to install the "Magic" version from this forum, it work´s wery well ... but NOW i have a red...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried this app too, and crashes on start, like the others. I originally had HXD v3.71_1.

jack43 said:
I tried this app too, and crashes on start, like the others. I originally had HXD v3.71_1.
Click to expand...
Click to collapse
Try these, I couldn't find any others:
MTCE_HXD.rar
drive.google.com

Pavel-71 said:
Try these, I couldn't find any others:
MTCE_HXD.rar
drive.google.com
Click to expand...
Click to collapse
I tried these all, but with the same result...

jack43 said:
I tried the app, but it doesn't work in android 10.
Click to expand...
Click to collapse
fix it using the steps in the thread to work on a10.

Easy Connect not register

Hi. Maybe you can help me here. I have a radio with android PX5, I had easy connect applications at the factory. It worked for me without any problem, now when I start I get the message "not register", and the application shuts down. What should I do please help.

Is it MTCD, post teh Android system informations screen shot including teh MCU version

marchnz said:
Is it MTCD, post teh Android system informations screen shot including teh MCU version
Click to expand...
Click to collapse
You know, it worked for me before, after a while it stopped working. I'll be in the car and I'll do it

Sitesot said:
You know, it worked for me before, after a while it stopped working. I'll be in the car and I'll do it
Click to expand...
Click to collapse
I like toast.

marchnz said:
I like toast.
Click to expand...
Click to collapse
I like eggs on my toast.