Hi all,
I am looking for a TWRP supporting official OTA MIUI updates. I have a MIUI 10.0.1.0 device with unlocked bootloader, installed TWRP 3.2.1 working fine and also rooted the device with Magisk. I received a notification for an OTA update to go to MIUI 10.2.1.0 that I cannot install because I'm in TWRP, but would like to. There is something similar for other Xiaomi devices, like the RedWolf project (see https://forum.xda-developers.com/xi...t/recovery-red-wolf-recovery-project-t3745713). Any idea? Many thanks!
Maybe that's help
https://forum.xda-developers.com/mi-mix/development/recovery-red-wolf-recovery-project-t3753146
Homar80 said:
Maybe that's help
https://forum.xda-developers.com/mi-mix/development/recovery-red-wolf-recovery-project-t3753146
Click to expand...
Click to collapse
Many thanks for your answer! Unfortunatelly, despite the title of the thread, Red Wolf is not working on Lithium devices, I already went through the thread and this is the conclusion; the only working TWRP for codename Lithium that I found so far is the modified twrp by raupe and blunden, but this one does not support OTAs as far as I know.
I'll keep looking...
Marcelocohenarg said:
Many thanks for your answer! Unfortunatelly, despite the title of the thread, Red Wolf is not working on Lithium devices, I already went through the thread and this is the conclusion; the only working TWRP for codename Lithium that I found so far is the modified twrp by raupe and blunden, but this one does not support OTAs as far as I know.
I'll keep looking...
Click to expand...
Click to collapse
Have you guys heard about the Q&A section?
albertoduqe said:
Have you guys heard about the Q&A section?
Click to expand...
Click to collapse
Don't answer a question by an another question. Provide OTA or ... ?
Sent from my Xiaomi Mi Mix using XDA Labs
Related
I'm beginning to notice thaton some of the newest nightly ROMS arent allowing my Photon Q to be flashed with some of the newer versions. I just tried flashing the newest CM11 nightly for the Photon Q and it wouldn't allow me(July 1). This also happened when I tried to use Kitstalk and the newest Liquid Smooth nightly(July 1). I tried using CWM 6.0.4.4 and TWRP 2.7.1.0, but I kept the getting same error message saying I need to have a 4.4 bootloader. Is there any way to update the bootloader or get around this?
http://forum.xda-developers.com/showpost.php?p=53819588&postcount=345
try flashing "cm-11-20140630-NIGHTLY-moto_msm8960.zip"
comstyle said:
http://forum.xda-developers.com/showpost.php?p=53819588&postcount=345
try flashing "cm-11-20140630-NIGHTLY-moto_msm8960.zip"
Click to expand...
Click to collapse
Thanks for the reply guys. These pieces of information are really hidden, I think other than Carbon, all other ROMS aren't even letting people know the XT897 is no longer supported for the newer versions of their releases.
KoolBurnX8 said:
Thanks for the reply guys. These pieces of information are really hidden, I think other than Carbon, all other ROMS aren't even letting people know the XT897 is no longer supported for the newer versions of their releases.
Click to expand...
Click to collapse
Its wrote in CM11 theard so its is not hidden
niko99 said:
Its wrote in CM11 theard so its is not hidden
Click to expand...
Click to collapse
Assuming you only use CM11, sure maybe. Their wiki pays no mention to it when this was implemented. The unified build wiki article is one of the first hits you get when a newbie is searching to root and flash custom roms. But what about other ROMs out there? This forum seems to be the main hub for everything Photon Q, but yet i've found numerous ROMs that aren't advertised here.
KoolBurnX8 said:
Assuming you only use CM11, sure maybe. Their wiki pays no mention to it when this was implemented. The unified build wiki article is one of the first hits you get when a newbie is searching to root and flash custom roms. But what about other ROMs out there? This forum seems to be the main hub for everything Photon Q, but yet i've found numerous ROMs that aren't advertised here.
Click to expand...
Click to collapse
yep, right.. for me is only cyanogen.. i forgot about other roms..
Hi Guys,
I used the Android 5.0 preview version until a few minutes ago. It was rooted and everything was working great.
I flashed the final 5.0 version just a few minutes again.
Rooted again the same way and it doesn't seem to work. At least Titanium Backup claims it's not rooted (although it does show up in SuperSU).
Any thoughts?
Sagi.
sagybp said:
Hi Guys,
I used the Android 5.0 preview version until a few minutes ago. It was rooted and everything was working great.
I flashed the final 5.0 version just a few minutes again.
Rooted again the same way and it doesn't seem to work. At least Titanium Backup claims it's not rooted (although it does show up in SuperSU).
Any thoughts?
Sagi.
Click to expand...
Click to collapse
Are you using the test build of Titaniumbackup?
only one thought..
people ask questions in the q&a section, not general. thats where questions go, not in general. thanks.
How did you guys root? I wasn't able to gain root by flashing the lastest SuperSU.zip file.
Thanks!
Saythis said:
Are you using the test build of Titaniumbackup?
Click to expand...
Click to collapse
Can't believe I forgot... Thanks
simms22 said:
only one thought..
people ask questions in the q&a section, not general. thats where questions go, not in general. thanks.
Click to expand...
Click to collapse
Sorry. Didn't know that.
Q&A for [Moto MAXX XT1225] CM12.0 (Pre-release)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Moto MAXX XT1225] CM12.0 (Pre-release). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How's the battery? (StandBy in stock is so poor..)
great
thank you world's best ROM
To use the Ambient Display can use ACDisplay and Gravity Screen program.
feCorrea said:
How's the battery? (StandBy in stock is so poor..)
Click to expand...
Click to collapse
Almost the same as stock
They removed the link from CM? No quark in the downloads links
comunello said:
They removed the link from CM? No quark in the downloads links
Click to expand...
Click to collapse
It's not up yet, we are waiting for it to be merged tomorrow, we currently have the Skrilax build to try.
Just arrives my new xt 1225 with kitkat.
Except to unlock the boot loader needed also to be rooted to install the cm12?
I am confused because read that can root it only with kitkat.
Thank you
hi boys
where I downloaded the rom?
---------- Post added at 11:37 PM ---------- Previous post was at 11:31 PM ----------
where the disclaimer
Hi! How is the battery performance of you?
a little help
hi guys
thanks for the great support
i just need a liite help installing the cm12
already have twrp recovery working
when try to flash zip files, get a error. the same happens in cm recovery or twrp.
any solution? thanks for your great work
colthars said:
hi guys
thanks for the great support
i just need a liite help installing the cm12
already have twrp recovery working
when try to flash zip files, get a error. the same happens in cm recovery or twrp.
any solution? thanks for your great work
Click to expand...
Click to collapse
Are you on brasil soak lollipop or Indian lollipop or Mexican lollipop OTA?
Jaocagomez said:
Are you on brasil soak lollipop or Indian lollipop or Mexican lollipop OTA?
Click to expand...
Click to collapse
system version 22.34.7.quark_retbr.retbr.en.BR retbr
need to be the english version to work?
colthars said:
system version 22.34.7.quark_retbr.retbr.en.BR retbr
need to be the english version to work?
Click to expand...
Click to collapse
Works on brasil lollipop too, are you unlocked bootloader?
yes
unlocked and root
have tried before unlocking and don't work either.
in cyanogen recovery say it a foot error.
in twrp just say there is a error and don't flash.
via adb is the same.
nightly released!
Downloading!
Download now!!!!
Arquive is release!
i flashed on top of skrillax build and it couldnt boot.
With LP, it takes a little longer to boot. Can you share logcat? There should not be a reason why it would not boot when flashed over my pre-release build.
EDIT: Well I've tested with a clean install, decided to use these gapps (http://d-h.st/RLt9 ) and it booted fine.
Skrilax_CZ said:
With LP, it takes a little longer to boot. Can you share logcat? There should not be a reason why it would not boot when flashed over my pre-release build.
EDIT: Well I've tested with a clean install, decided to use these gapps (http://d-h.st/RLt9 ) and it booted fine.
Click to expand...
Click to collapse
doest it take more than 5 minutes to boot?
Hi all,
first, sorry for my english and second sorry because probably i'm asking something you allready answered 100 times..
I have a new 702L (great phone, i love it) running the stock rom b006, i installed twrp and rooted it. Just for your understanding, i'm not a "beginner" but also not an expert and i always flashed roms (Samsung Note 1, iocean G7, Coolpad 9976t) by cwm or twrp, not by adb/fastboot.
Only i don't really understand some things, mayby i didn't find the correct infos but are there some custom roms for the 702 or "only" for the 703? The way to flash it is for me a little bit to hard to understand and i'm not sure if i would brick my 702..
I would like to have multiwindows and double tap to wake.
No chance to flash only a zip by twrp like my old phones?
Thank for your help, if there is a explanation in a other thread so please give me an info delete my question here.
Have a great 2016, greets from the italian Alps.
Shortdiver said:
Hi all,
first, sorry for my english and second sorry because probably i'm asking something you allready answered 100 times..
Click to expand...
Click to collapse
No problem
Shortdiver said:
I have a new 702L (great phone, i love it) running the stock rom b006, i installed twrp and rooted it. Just for your understanding, i'm not a "beginner" but also not an expert and i always flashed roms (Samsung Note 1, iocean G7, Coolpad 9976t) by cwm or twrp, not by adb/fastboot.
Click to expand...
Click to collapse
That will be needed
Shortdiver said:
Only i don't really understand some things, mayby i didn't find the correct infos but are there some custom roms for the 702 or "only" for the 703? The way to flash it is for me a little bit to hard to understand and i'm not sure if i would brick my 702..
Click to expand...
Click to collapse
Practically there are NO really custom ROMs for MediaPad X2. Only customized stock ROMs (debloated and heavy debloated of chinese trtash AND original from China - KangVIP version of stock ROMs (with many improvements) like that what you want:
Shortdiver said:
I would like to have multiwindows and double tap to wake.
Click to expand...
Click to collapse
BUT!! Upgrades for european (GEM-701) AND Hong-Kong(GEM-702) versions are very sparse. Only for chinese version (GEM-703) upgrades are quite regular and even expanded KangVIP ROM is destined for GEM-703. So some people found a way to flash GEM-703's firmware to other versions because hardware differences are minimal, if any... In that way owner of GEM-702 achieved possibility to use more functions and/or ability to OTA upgrades designed for GEM-703 ( in near future Android 6 which beta version was spotted on chinese servers)
Shortdiver said:
No chance to flash only a zip by twrp like my old phones?
Click to expand...
Click to collapse
Sorry, NO. It is more complicated and needs more study. All info you can find in "MediaPad X2 Android Development" forum.
EDIT//
Just now I looked into forum and have seen news from our leading developer @ajsmsg78 - he developed new custom ROM with Google functionality. Info in thread [ROM] [5.1.1] Simply Google **01/05/2016**
Thank you for all this infos. ?
Gesendet von meinem GEM-702L mit Tapatalk
I'm kind of new to this, but I saw a video of ONE UI running on the OnePlus 6 and 6t, but it day that they port that Rom, will I be able to install that Rom on the OnePlus 7 Pro for example? Or install a Android Q beta Rom via TWRP without port/support? Or does it has to be ported or compatible with the device?
Theoretically you should be able to flash A/B GSIs (note that the OnePlus 6 uses A only GSIs! There's a difference! Grab the AB GSIs!). Don't expect things to work properly. It might boot. It might not.
radhamescambero said:
I'm kind of new to this, but I saw a video of ONE UI running on the OnePlus 6 and 6t, but it day that they port that Rom, will I be able to install that Rom on the OnePlus 7 Pro for example? Or install a Android Q beta Rom via TWRP without port/support? Or does it has to be ported or compatible with the device?
Click to expand...
Click to collapse
There's a handful of ROMs available now in their respective threads here on XDA. They all have instructions on installation.
Yep, go to the Development section and study the roms. Then Flash away...
galaxys said:
Yep, go to the Development section and study the roms. Then Flash away...
Click to expand...
Click to collapse
What's the point of posting your comment if you're not going to help?
radhamescambero said:
What's the point of posting your comment if you're not going to help?
Click to expand...
Click to collapse
Send me your phone and I'll flash a custom ROM for you. Otherwise, do your homework. We're not here to babysit.
mikex8593 said:
Send me your phone and I'll flash a custom ROM for you. Otherwise, do your homework. We're not here to babysit.
Click to expand...
Click to collapse
XDA has a "Question and Answer" thread, which was created to help each other, if you're not going to help don't even bother commenting, also, line I said, why are you on this section if you're not going to help?
radhamescambero said:
XDA has a "Question and Answer" thread, which was created to help each other, if you're not going to help don't even bother commenting, also, line I said, why are you on this section if you're not going to help?
Click to expand...
Click to collapse
ROMs are built for a specific device and can be ported and maintained. There are a few that you need to flash in TWRP as per their specific instructions and a few that you can flash in magisk. You need to research and all the information you need is usually on XDA with each ROM in the development section. If it's not there, it probably doesn't exist or is done by a Dev who does not associate with XDA. Make sure you are familiar with nandroid backup and restore, root, TWRP and all the flashing methods associated with each. The instructions are all there and Google is your friend. Most issues you may experience are already brought forth and that's what the search function is for, but if you follow the instructions, you shouldnt have any issues.
https://forum.xda-developers.com/oneplus-7-pro/development