Hello hope someone can help please have been trawling forums for a week now without getting anywhere.
I was running nxt-l29c636???? tried to upgrade via app firmware finder, first two I picked just failed then I picked older one thinking I might need to go from android 6 to 7 then to 8
Now it's stuck in a loop.
The firmware I picked looked like it was installing but failed early on 1 or 2 %
I can get to erecovery - does nothing and I've tried copying update.app to SD card and holding three button method but it does nothing.
When I fastboot it and rescue mode my phone status is locked.
Anyone know how I can recover please?
Ideally just want to flash it and if so it'd be great if it was android 8
Thanks for looking
So I fixed this by using the excellent DC-Phoenix, my problem was drivers
So for any noobs out there, got this work. My problem was the phone would never go into upgrade mode. The problem was in device manager (windows 7x64 but doesn't matter which version of windows), was when DC-Phoenix tried to put the phone in upgrade mode the command was sent and acted on but device manager showed warning triangles that it didn't have a driver or the driver was only partially loaded.
When I directed it to the downloaded Hi-Suite (which has all the drivers) it loaded the driver(s) there are TWO drivers on virtual COM ports. So if you phone is not going into upgrade mode best to check that Windows can actually see these TWO COM ports.
Related
So sad. Just bought this phone. I tried to upgrade to ICS via but used the Galaxy S firmware (gti9000) by mistake...turns out ICS isn't out yet for my phone, the SPHD710. While flashing I managed to upload the "modem" file but when it was writing the file (it says "wait 2 minutes for write") odin froze.
and now..
Here's the situation. The phone will boot into the gti9000 firmware (i.e I get to home screen--so I think I'm semi-bricked), but WiFi won't work and the phone crashes a lot. Basically like a "safe-mode". Here are the conditions I'm dealing with
1) Windows 7 will not recognize phone when plugged in. It charges but does not show up in device manger
2) Odin does not recognize the phone at all. It was recognized for a split second on my laptop when I was installing/reinstalling drivers. Can't replicate this.
So basically I'm stuck. I tried going into recovery mode and applying update from SDcard (to revert to stock) but i the SD card won't mount
Anybody help??? PLEASE. I don't want a $500 paperweight.
I can give as many details as you like.
Thanks so much!
I decided I wanted to change the firmware .. I did not do this for the first time so I downloaded the beta Accura SAMBA v2, with ciekowoĊci with UPK.zip. I plugged the phone to upload ZIPA the card and started | drinking heavy digging in UPK.zip CWM.exe shoved and there, not knowing that he will immediately do something. It turned out that he started flashign - now like a brick phone detects omap4430 but after installing the drivers in Device Manager / Ports LG CDMA, there is no serial ports and LGflash Tool does not detect my phone. The system is win xp. Could only service?
(google translate)
did you try putting it in download mode take the battery out hold volume down and power i think then plug the usb in keep holding buttons tell the phone vibrates or device manager finds it.
Which OS are u using(Windows 7 or XP). I bricked the phone multiple times trying to install the wrong CWM onto the phone as the latest version of rom manager did not have the O3D as an option. I tried to recover in Windows 7 and couldn't. Had to be done in Windows XP.
If it is still bricked, let me know and i will forward a link to the recovery page to get the phone back up and running.
Kavir
Prior to obtaining answers the phone sent the unit if the warranty does not include a guarante (phone rooted) back to the topic.
(google translate)
Hi everyone... Sorry for my English.
My phone was ICS updating later hard brick,
download mode does not open
Lge serial port usb driver can not find
I removed all the drivers and installed it again
Omap4boot : I've tried all but did not respond to
seems to only fastboot display
completely renewed the operating system but unsuccessful
What should I do ?
Thank you for helping
i have same problem please someone help :crying:
as you might have read in the umpteen (unanswered) panicy posts ive wrote over the past 24 hours ive also had this problem. what ive found out is the download mode with the S/W screen seems intermittent. even if you get a black screen when entering download mode it seems to work and when the flash starts the familiar S/W screen will appear.
if flashing (what ive been doing is)
1. remove battery/sd/sim
2. queue up flashing software and press go
3. when it says ready hold vol up and plug in usb
4. wait a couple of seconds and flash will start
5. a couple of seconds more S/W screen will appear
6. insert battery (without this step all my flashes were failing at 30%)
I have managed to reach sw mode using xballs ressurection guide but still can get the serial port needed to come up which you then change to 41. Have reinstalled drivers and bootloaders with no success running windows 7 32bit
Any help with this?
jonbubble said:
I have managed to reach sw mode using xballs ressurection guide but still can get the serial port needed to come up which you then change to 41. Have reinstalled drivers and bootloaders with no success running windows 7 32bit
Any help with this?
Click to expand...
Click to collapse
ive heard window 7/8 can be iffy with this so i use an old xp laptop to do all my flashing. i think theres guides on how to get it to go using win 7/8 but i would just install an xp vm
Hello Everyone,
2 days ago i tried to hard rest my Karbonn A21 android phone. i pressed Power+volume+home button. after that there was an error displayed on the screen saying "ENTRY QPST DOWNLOAD". i quickly searched on the internet but wasnt able to find any successful link. but then my computer asked me to format the device, i thought this will reset my phone but unfortunately i was totally wrong. after the format i tried to start my phone again but nothing happened. i also tried different combinations of keys but all nothing happens not even a single pixel lit up lol. then i downloaded cherry mobile flare software and AIO flasher and all the image files and other files required. they didnt work for me too coz my laptop (windows 7, 64 bit) doesnt recognise the device (unknown device or Com5 error). i tried to flash it in fastboot in AIO flasher. it says flashing but nothing really happens even after 10-15 minutes. all the online forums i searched they say enable debugging mode on ur phone in order to reboot but i dont know how the heck i can do it when my phone doesnt even start up lol. I am left with a dead phone now. can anyone please help me out and solve my problem. and please advise me step by step what to do next in order to get my phone working...please...
Hi hope someone can advise as I'm loosing the will to live
I've a mate 8 NXT-L29C636 which I believe is asia region although I've from the UK
I was running stock android 6 with EMUI 4.0
When I ask it to check for any update, it always came back with no updates.
I saw plenty of threads saying they had updated to android 7 and 8 and how they done it.
So I downloaded Firmware Finder from Google play and without too much difficulty managed to start installing firmware. That's when my problems started
This was two weeks ago and I've been spending 100+ hours trying to recover.
I think it failed a 5% or something and since then my phone will not boot properly.
I can only fastboot it and sometimes to erecovery and EMUI to wipe/factory reset
Searching forums it seems DC Phoenix was the only software that could help so I bought it.
So far I've tried flashing firmware from DC-Unlocker site in standard more but all goes ok with success for all the partitions but it requires the phone to put into upgrade mode, something my phone never does and I can't force it.
So that leaves me with advanced mode, again all successful but booting the phone just gives the huawei logo then reboots again
I've tried different stock roms NXT-L29C636 but they all claim successful but still can't boot my phone
I've followed the steps in DC-Phoenix instructions to no avail.
The last step today meant shorting a pin to ground to force the phone into a mode when it was seen as windows as Huawei USB COM device, which seemed to work.
The instructions claimed I can use any NXT board flash as they're all the same and again all successful i used
NXT-AL10_M00A102_Board Software_Global _Nonspecific_Android 6.0_EMUI 4.0_05021WLB_4.dtwork
but the log file now says build is;
Build number: HLNXTAL10BM00A102
Model: HUAWEI NXT-L29
Battery state: 3249mv
from
Build number: :NXT-L29C432B192
Model: HUAWEI NXT-L29
Battery state: 7035mv
So my question is am I using the wrong firmware? It is always successful so I don't think it's bricked but I can't work out what I'm doing wrong.
Other things to mention is pressing vol - and vol + and power with sd card and dload doesn't work either.
Sorry for long post and thanks for reading
Any help very much appreciated
No-one? I didn't expect a reply right away, but I can't be the only one with questions? Is there a better forum to post on?
Thank you
so for any noobs out there, got this work. My problem was the phone would never go into upgrade mode. The problem was in device manager (windows 7x64 but doesn't matter which version of windows), was when DC-Phoenix tried to put the phone in upgrade mode the command was sent and acted on but device manager showed warning triangles that it didn't have a driver or the driver was only partially loaded.
When I directed it to the downloaded Hi-Suite (which has all the drivers) it loaded the driver(s) there are TWO drivers on virtual COM ports. So if you phone is not going into upgrade mode best to check that Windows can actually see these TWO COM ports.
Hope this helps someone