Related
I was enrolled in the Android O Beta Program and followed these steps but can't get TWRP to boot:
• Un-enroll from O beta
• Take OTA to downgrade to 7.1.2 N2G470
• Set up system (dev. options, enable USB debugging, etc.)
• fastboot boot twrp-3.0.2-0-RC1.img
• Boots in to TWRP but doesn't go passed splash screen (after waiting more than 30 minutes)
Not sure if I have to re-flash nougat bootloader, radio and img. Any help is appreciated, thanks!
It's a known issue with TWRP with way O repartitions your phone even after downgrade. You'll have to wait for an update to be released to accommodate the changes in partition structure.
You'll have to flash the factory images from April or May to both slot before it will work again properly
S8ntsHaz3 said:
You'll have to flash the factory images from April or May to both slot before it will work again properly
Click to expand...
Click to collapse
Gotcha, I'll give it a shot tonight.
No problem
S8ntsHaz3 said:
You'll have to flash the factory images from April or May to both slot before it will work again properly
Click to expand...
Click to collapse
This is correct.. all you need to do is flash the factory images to BOTH slots and you'll be good to go.. I went through this issue myself and once I did this, everything is back to normal
pahlerc1 said:
This is correct.. all you need to do is flash the factory images to BOTH slots and you'll be good to go.. I went through this issue myself and once I did this, everything is back to normal
Click to expand...
Click to collapse
Perfect. Thanks for looking out dudes.
That's what this place is for!!!
S8ntsHaz3 said:
You'll have to flash the factory images from April or May to both slot before it will work again properly
Click to expand...
Click to collapse
I've tried multiple times to get this booted to both slots and can't seem to get it right. Can you provide steps how to flash to both slots?
I use the unified android toolkit. I'm just learning all of this myself but I know there's a guide on here somewhere that can explain it better than my self. I believe it involved getting the factory image and removing the -w from the flashall file. I'm sorry I cant be of more help!!
S8ntsHaz3 said:
I use the unified android toolkit. I'm just learning all of this myself but I know there's a guide on here somewhere that can explain it better than my self. I believe it involved getting the factory image and removing the -w from the flashall file. I'm sorry I cant be of more help!!
Click to expand...
Click to collapse
Thanks, I'll look around, but if anyone has a link I'd appreciate it
In my experience if you flash the factory images twice it's flashes to both slots
Finally got the image flashed to both slots. Now for some reason I always get a bootloop after flashing the twrp installer. fml
chesstopher said:
Finally got the image flashed to both slots. Now for some reason I always get a bootloop after flashing the twrp installer. fml
Click to expand...
Click to collapse
On the May update?
You need to install the zip from inside twrp that is in the first post of the thread below. Need to do that when you root, twrp or change kernels.
So fastboot boot to twrp again and adb push the zip to the phone and install it.
https://forum.xda-developers.com/an...signing-boot-images-android-verified-t3600606
TonikJDK said:
On the May update?
You need to install the zip from inside twrp that is in the first post of the thread below. Need to do that when you root, twrp or change kernels.
So fastboot boot to twrp again and adb push the zip to the phone and install it.
https://forum.xda-developers.com/an...signing-boot-images-android-verified-t3600606
Click to expand...
Click to collapse
Yup, I was on the may update, had no idea they changed anything up in May. What I did was reboot the system, download the twrp zip, fast boot back to twrp and flash the zip, resulted in boot loop. I'll try flashing the verified bootsigner later and if that doesn't work, I'll try rolling back to April.
Flashing the bootsigner did the trick. Thanks for all the help!
enrolled android beta program for almost a day, battery consumes very much.
Now flashing the full May image, but after finishing flash, the phone can't boot into system.
It persisted in four turning dots for almost half an hour.
Tried to re-flash the may image, it did no help.
What should I do, mate?
chesstopher said:
Flashing the bootsigner did the trick. Thanks for all the help!
Click to expand...
Click to collapse
bush911 said:
enrolled android beta program for almost a day, battery consumes very much.
Now flashing the full May image, but after finishing flash, the phone can't boot into system.
It persisted in four turning dots for almost half an hour.
Tried to re-flash the may image, it did no help.
What should I do, mate?
Click to expand...
Click to collapse
Sorry man, I've been away from my computer for a couple days. Glad to see you got it figured out. What worked for me was booting into twrp from fastboot, flashing the twrp zip, flashing the latest bootsigner zip from CF, reboot recovery then following the steps to flash PA + gapps that I had downloaded previously.:good:
So I have a rooted Pixel 3 through Magisk that I have been updating monthly up until this point via flashing the factory image with the flash.bat edited to remove "-w" from it to ensure that my phone does not become wiped after flashing each month's update. Afterwards, I would boot up the temporary TWRP image to then install the Magisk zip to re-root it. This had worked well up until this point. However, this month with the Android 10 update, this method has failed me. For this month, I did the exact same thing...download the factory image extract the image and other parts (including the flash.bat file), edit the flash.bat file and run. The issue was after flashing, the phone would try to boot and then get stuck at the G-logo with the loading bar under. It would use up about 5-10 mins to try and boot up, then fail, and then reboot again, fail again a second time and then just go fastboot mode. I tried this with both the .019 and .020 firmware and both failed me. In order to fix my phone, I'd just install the factory image of the August update instead, which had no issue.
I next attempted to ADB sideload the OTA update. I made sure to start with an unrooted install of the August update (by doing what I said above), and then using stock recovery would use ADB sideload with the new Sept OTA update. After sideloading, when trying to boot up the phone would attempt to boot around 7-9 times and just fail as it kept trying and trying to load up. Again, needed to fix it by flashing the August update.
I've done a bit of reading and it seems people have done factory resets and wipes of the phone before finally having success updating their phone to Android 10. I'm really hoping a method to fix this WITHOUT needing to do a factory wipe of my phone....
if you haven't already, try downloading the latest fastboot binaries from google.
Also FYI rooting Android Q on Pixel 3 is still difficult because TWRP doesn't support Android Q yet.
guest12233213113 said:
if you haven't already, try downloading the latest fastboot binaries from google.
Also FYI rooting Android Q on Pixel 3 is still difficult because TWRP doesn't support Android Q yet.
Click to expand...
Click to collapse
Are you referring to the SDK Platform tools? I was using version 29.0.2 from July for the past week until I recently saw 29.0.3 popup in the last day or so (was released a few days AFTER the factory images for Android 10 were released). Have tried with 29.0.3 and still not working. I get the issue "no valid slot to boot".
You might have already tried it but if not you could try flash without -w both slots just to make sure everything is synced up? I've had to do this once in a while to correct weird stuff. There may be better ways but when I remove -w I then add --skip-reboot. Then you can change slots with 'fastboot set_active SLOT' after the flash without rebooting and then simply run the flash again.
ktdt00 said:
You might have already tried it but if not you could try flash without -w both slots just to make sure everything is synced up? I've had to do this once in a while to correct weird stuff. There may be better ways but when I remove -w I then add --skip-reboot. Then you can change slots with 'fastboot set_active SLOT' after the flash without rebooting and then simply run the flash again.
Click to expand...
Click to collapse
Just tried your suggestion of flashing to both slots. Unfortunately, same result.
Toronadian said:
Just tried your suggestion of flashing to both slots. Unfortunately, same result.
Click to expand...
Click to collapse
What version of magisk manager are you using? You need the canary build. Then modify the boot image with it and flash that thru fastboot. You can't flash the magisk zip in twrp anymore, at this time.
jd1639 said:
What version of magisk manager are you using? You need the canary build. Then modify the boot image with it and flash that thru fastboot. You can't flash the magisk zip in twrp anymore, at this time.
Click to expand...
Click to collapse
Since attempting to switch to Android 10, I've been using the latest Canary build of Magisk Manager, currently 7.3.3-f383d11d (234).
The thing though is that it's bootlooping before I even attempt to root. Like after attempting to update the firmware on it's first attempt the device is bootlooping. It's happening when it's stock (no patched boot image. I've tried it with both the stock firmware, and also flashing the patched boot image before it's first boot up after the update and both cases there's a bootloop.
Toronadian said:
Since attempting to switch to Android 10, I've been using the latest Canary build of Magisk Manager, currently 7.3.3-f383d11d (234).
The thing though is that it's bootlooping before I even attempt to root. Like after attempting to update the firmware on it's first attempt the device is bootlooping. It's happening when it's stock (no patched boot image. I've tried it with both the stock firmware, and also flashing the patched boot image before it's first boot up after the update and both cases there's a bootloop.
Click to expand...
Click to collapse
You possibly need to completely uninstall magisk. But of course twrp is not working on 10 so that's a non- starter. See the last 3 or 4 pages of the twrp thread for the 3xl. @Tulsadiver has a boot image file that i think will work for you.
jd1639 said:
You possibly need to completely uninstall magisk. But of course twrp is not working on 10 so that's a non- starter. See the last 3 or 4 pages of the twrp thread for the 3xl. @Tulsadiver has a boot image file that i think will work for you.
Click to expand...
Click to collapse
Are you referring to uninstalling Magisk on Android Pie before trying to flash Android 10?
Toronadian said:
Are you referring to uninstalling Magisk on Android Pie before trying to flash Android 10?
Click to expand...
Click to collapse
No, i think you need to do it now. You have some half installed magisk and it's not letting you boot. You need a work around that to get it to boot. If i read correctly, you've already tried to flash the stock firmware with the - w in the flash all batch file. But check out that thread in the 3xl forum and see if others have been successful with it.
jd1639 said:
No, i think you need to do it now. You have some half installed magisk and it's not letting you boot. You need a work around that to get it to boot. If i read correctly, you've already tried to flash the stock firmware with the - w in the flash all batch file. But check out that thread in the 3xl forum and see if others have been successful with it.
Click to expand...
Click to collapse
If you're talking about right now, I'm back on August update, so still Android 9, with my phone rooted via Magisk and everything is currently functional. So use TWRP, flash the latest Magisk Uninstaller?
Afterwards what should I do after? I'm looking in the TWRP thread for the 3XL, is THIS the boot image you would like me to try? Should I be flashing that boot image AFTER updating to Android 10 (if it works)?
Toronadian said:
Are you referring to uninstalling Magisk on Android Pie before trying to flash Android 10?
Click to expand...
Click to collapse
Try fastboot boot image-new.img, this image. It should boot core-only mode and you can then see if you have some modules installed that need to be removed (/data/ADB/modules). It is not zipped. Just rename it as image-new.img
https://www.androidfilehost.com/?fid=1899786940962585361
---------- Post added at 05:06 PM ---------- Previous post was at 05:03 PM ----------
Toronadian said:
If you're talking about right now, I'm back on August update, so still Android 9, with my phone rooted via Magisk and everything is currently functional. So use TWRP, flash the latest Magisk Uninstaller?
Afterwards what should I do after? I'm looking in the TWRP thread for the 3XL, is THIS the boot image you would like me to try? Should I be flashing that boot image AFTER updating to Android 10 (if it works)?
Click to expand...
Click to collapse
Yes, flash uninstaller if you can or maybe in magisk manager click uninstall. Modules survive updates and you might have pie modules that obviously aren't meant for Android 10.
Tulsadiver said:
Try fastboot boot image-new.img, this image. It should boot core-only mode and you can then see if you have some modules installed that need to be removed (/data/ADB/modules). It is not zipped. Just rename it as image-new.img
https://www.androidfilehost.com/?fid=1899786940962585361
---------- Post added at 05:06 PM ---------- Previous post was at 05:03 PM ----------
Yes, flash uninstaller if you can or maybe in magisk manager click uninstall. Modules survive updates and you might have pie modules that obviously aren't meant for Android 10.
Click to expand...
Click to collapse
Alright I'll try running the magisk uninstaller zip in twrp later tonight.
I haven't installed any modules but I did use the systemless hosts setting (for Adaway) and I do see it in my "modules" tab. Wonder if that's the culprit.
The boot image you have posted, is that to be flashed after/if Android 10 boots up successfully after flashing the factory image?
Toronadian said:
Alright I'll try running the magisk uninstaller zip in twrp later tonight.
I haven't installed any modules but I did use the systemless hosts setting (for Adaway) and I do see it in my "modules" tab. Wonder if that's the culprit.
The boot image you have posted, is that to be flashed after/if Android 10 boots up successfully after flashing the factory image?
Click to expand...
Click to collapse
Curious, how do you run the uninstaller in TWRP without a working TWRP?
The image I posted is to recover from bootloop caused by bad modules. Phone should boot up with modules disabled.
Tulsadiver said:
Try fastboot boot image-new.img, this image. It should boot core-only mode and you can then see if you have some modules installed that need to be removed (/data/ADB/modules). It is not zipped. Just rename it as image-new.img
https://www.androidfilehost.com/?fid=1899786940962585361
---------- Post added at 05:06 PM ---------- Previous post was at 05:03 PM ----------
Yes, flash uninstaller if you can or maybe in magisk manager click uninstall. Modules survive updates and you might have pie modules that obviously aren't meant for Android 10.
Click to expand...
Click to collapse
Tulsadiver said:
Curious, how do you run the uninstaller in TWRP without a working TWRP?
The image I posted is to recover from bootloop caused by bad modules. Phone should boot up with modules disabled.
Click to expand...
Click to collapse
I boot the temporary TWRP image for Android 9 as it works on that. I'd assume I would use the install option with the uninstaller zip? Keep in mind currently I'm on Android 9 right now (every time I bootloop due to the Android 10 flashing not working, I run the flash.bat script to reinstall the August firmware).
And speaking of nonworking TWRP on Android 10...if for some reason magisk causes bootloop, in order to uninstall magisk, would I need to adb sideload it then?
OK seriously....really have no idea what the issue is. In TWRP on Android 9, I flashed the Magisk Uninstaller zip then attempted to run the flash.bat file to try and flash Android 10. Exact same issue before with the bootloop. Before that, I also tried flashing Android 10 after I had removed the Systemless Hosts "module" that was there (yes, I did restart the phone first after removing it), same thing with the bootloop. I have no clue.
Update Sept. 24:
Whelp, seems like people are just as out of ideas as I am. I tried today the NEW firmware Google just released (.20.C3, differs from the one released earlier in the month) as well as the newest SDK Platform Tools (29.0.4, a second update that was released in September), still not working. I installed the factory image using the edited flash-all.bat file (removing "-w") and again, device tries to boot up twice and then restart back in fastboot mode, with the issue being "no valid slot to boot".
EDIT: Re-flashed August firmware back onto the phone, and then tried to sideload the new .20.C3 firmware as a OTA (yes, I made sure to use the OTA zip and not the factory image), now just continuously bootlooping. I think I'm on bootloop #5 or 6 right now.
FINALLY have a positive update. I have Cerberus, an anti-theft app on my phone that I tried to uninstall just for the sake of trying to see if some apps were causing compatibility issues. I was trying this after reading one of the really long threads on the Google support threads that someone managed to get the Android 10 update to work AFTER removing some apps. After taking some time to finally remove Cerberus for the time being, I once again tried to flash the factory image for Android 10 (the newest one, .20.C3) and it ACTUALLY managed to work. I'm now finally on Android 10.
With my own device finally figured out, I think I may give my wife and dad's devices a try to update to Android 10 (they're on Pixel 2 and 2XL respectively). I installed Cerberus on their devices as well and I think I'm gonna try removing that first and seeing if that manages to allow me to update the Pixel 2 and the 2XL to Android 10.
I've always wanted to post one of these
https://developers.google.com/android/images
How do we flash the update and not lose data and root? All the guides are still for 9.0 for updates
Androider4Life said:
How do we flash the update and not lose data and root? All the guides are still for 9.0 for updates
Click to expand...
Click to collapse
There's a link to a how-to for 10 in the stickied how-to for 9 - https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117.
But without twrp I don't think there's a way to retain root, I think you'll need to go the route of patching the boot image with Magisk. But for data just remove the -w switch from flash-all, that should be the same.
kerobrat said:
There's a link to a how-to for 10 in the stickied how-to for 9 - https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117.
But without twrp I don't think there's a way to retain root, I think you'll need to go the route of patching the boot image with Magisk. But for data just remove the -w switch from flash-all, that should be the same.
Click to expand...
Click to collapse
I was looking thru that post and didnt wanna risk wiping the device. I just had to wipe a few days ago due to Edxposed bootloop issue lol
Ha, yeah, I feel your pain there, wiping is way too much of a pain to do that frequently
Androider4Life said:
How do we flash the update and not lose data and root? All the guides are still for 9.0 for updates
Click to expand...
Click to collapse
You can also flash the OTA file in stock recovery and not lose data.
spotmark said:
You can also flash the OTA file in stock recovery and not lose data.
Click to expand...
Click to collapse
Will it retain root or do you mean - https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation
Androider4Life said:
Retain root or have to re-root
Click to expand...
Click to collapse
Have to re-root using the Magisk method. Put stock boot on phone, patch boot with Magisk, put modded boot back on computer, and flash in fastboot. AFAIK, there is no way to retain root. Every time you flash the latest monthly patch, it flashes a new stock boot. Therefore, no root.
kerobrat said:
There's a link to a how-to for 10 in the stickied how-to for 9 - https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117.
But without twrp I don't think there's a way to retain root, I think you'll need to go the route of patching the boot image with Magisk. But for data just remove the -w switch from flash-all, that should be the same.
Click to expand...
Click to collapse
There's a way with taking the ota through settings I found out how from a user on here which is:
Once received the ota , go to magisk first uninstall/restore images then download/install ota then DONT REBOOT, go back to magisk install magisk to inactive slot from the app then reboot and all should work with new ota update and have root still.
What is this update 4.3mb
Once again, my phone got bricked. I wanted to sideload, so I tried to get it into recovery, it wouldn't, so I tried a few times, and decided screw it. Now my phone bootloops. So, download the image and try flashing, it won't go into fastboot and fails. No matter what I do, I can't seem to save it. Can anyone help me with this? I'm trying a different computer in a sec, but, not sure if that will work either.
Edit: The different computer doesn't see it... FML
gettinwicked said:
Once again, my phone got bricked. I wanted to sideload, so I tried to get it into recovery, it wouldn't, so I tried a few times, and decided screw it. Now my phone bootloops. So, download the image and try flashing, it won't go into fastboot and fails. No matter what I do, I can't seem to save it. Can anyone help me with this? I'm trying a different computer in a sec, but, not sure if that will work either.
Edit: The different computer doesn't see it... FML
Click to expand...
Click to collapse
Just flash the factory image or ota thru flash.all bat file after you do/did the necessary steps like extract the images etc to platform tools folder on ur pc
Or visit here for more help/steps
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-progress-available-t3876849
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117
gm007 said:
What is this update 4.3mb
Click to expand...
Click to collapse
Its just a security patch, we already had the updated rom in september, this just adds the latest security patch. Even though its only 4.3mb, its taking ages to patch, 10 mins still installing.
Jiggs82 said:
Just flash the factory image or ota thru flash.all bat file after you do/did the necessary steps like extract the images etc to platform tools folder on ur pc
Or visit here for more help/steps
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-progress-available-t3876849
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117
Click to expand...
Click to collapse
You missed the part where I did try flashing the image. I've done this a hundred times, so, I did it right.
Anyway, I got it. I didn't realize my work computer had a USB-C port, so, I grabbed one and tried flashing the image with that. Worked! Thank God... I guess sdk tools doesn't like a USB 1 to C cable, and my phone doesn't like going into recovery...
Androider4Life said:
How do we flash the update and not lose data and root? All the guides are still for 9.0 for updates
Click to expand...
Click to collapse
kerobrat said:
There's a link to a how-to for 10 in the stickied how-to for 9 - https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117.
But without twrp I don't think there's a way to retain root, I think you'll need to go the route of patching the boot image with Magisk. But for data just remove the -w switch from flash-all, that should be the same.
Click to expand...
Click to collapse
If you are rooted flash the boot.img of the factory image you are currently on to both slots:
Code:
fastboot flash boot --slot all boot.img
Then Do #4 'keep Data'
Homeboy76 said:
If you are rooted flash the boot.img of the factory image you are currently on to both slots:
Code:
fastboot flash boot --slot all boot.img
Then Do #4 'keep Data'
Click to expand...
Click to collapse
I am starting to feel more and more like a lot of the bootloop issues are being caused by OTAs swapping slots on install. Besides the --slot all patched boot, it might help to run the OTA twice to get it to install to both slots completely. Preferably though, quit using OTAs and work with -w removed flash-all installer (and even then possibly installing to both slots with an active slot swap in between and before rooting). The double install is common when installing custom ROMs, and the process for OTA sideloads is pretty similar.
Performance improvement, feels smooth and responsive. Glad i dont need to root this phone, ppl are having so many problems.
boe323 said:
Its just a security patch, we already had the updated rom in september, this just adds the latest security patch. Even though its only 4.3mb, its taking ages to patch, 10 mins still installing.
Click to expand...
Click to collapse
My download was 1.3 gb and took forever to install. That's more than just the security patch.. Build number is different too.
Sent from my Pixel 3 XL using Tapatalk
Worked exactly the same as the 10 and .C3 builds for me. Flash-all (minus -w) and patched boot in Magisk. No issues. It was not just security this month. See the functional patches in the bulletin.
https://source.android.com/security/bulletin/pixel/2019-10-01
is there new platform tools too?
*Note* Some people have had success with this, while some others have not. You do this at your own risk.
Prerequisites:
Magisk Manager might need to be unhidden based on reports from some users.
Magisk needs to have a backup of stock boot.img.
Preserve AVB 2.0/dm-verity must be enabled. (Have gotten mixed reports on this it might or might not be needed)
Check the following post if you don't meet the prerequisites
https://forum.xda-developers.com/showpost.php?p=81186247&postcount=73
Update Process
When phone detects update
1. Disable any desired Magisk modules, ex. Edxposed (I usually disable all modules just to be safe)
2. Reboot
3. In Magisk, select Uninstall, press Restore Images
4. Do NOT Reboot
5. Install OTA Update via Settings -> System -> System Updates
6. When prompted to reboot, Do NOT Reboot
7. In Magisk Manager press Install
8. Select Install to Inactive Slot
9. Reboot
10. Enable the Magisk modules one by one
In case of bootloop after enabling a module there are 2 ways that I know of on how to retain root and fix bootloop.
One requires ADB
While phone is stuck in bootloop, connect phone to PC and run this commands via ADB.
adb wait-for-device shell magisk --remove-modules
adb reboot
This will remove all modules and you should be able to boot.
The second way is via fastboot. More information in this thread.
https://forum.xda-developers.com/pixel-4-xl/themes/magisk-modules-disabler-booting-magisk-t3990557
Some information that might help some people.
eg1122 said:
I know some users flash patched boot.img that someone else patched, thus bypassing the creation of a backup. I think choosing or not choosing to preserve avb 2.0/dm-verity also affects if phone will take OTA. I always preserve mine and always patch my own boot.img so I haven't ran into any issues. I'll just have to wait and see what happens on my end once I get the update. This reminds me of some issues some people where getting early on when rooting. Some people had to flash the patched boot.img to both a/b slots and some people didn't. Having both slots with a patched boot will also break the restoring of stock boot.img as Magisk only restores the active slot.
Click to expand...
Click to collapse
If you do it this way you'll be using the patched boot image from the previous update and not the current one.
airmaxx23 said:
If you do it this way you'll be using the patched boot image from the previous update and not the current one.
Click to expand...
Click to collapse
No it doesn't. When you select install to inactive slot it patches the newly installed boot.img that has been installed to the inactive slot. Only reason phone promts you to reboot after an update is to switch slots.
For whatever reason, whenever I would try to do Uninstall - Restore images (in step 3 of the OP), I would get a toast error saying "Stock backup does not exist"
I'm not sure why the expected backup files hadn't been created. I suspect it has to do with the process of manually patching the boot image whilst initially rooting, as suggested in this Git issue.
Anyway, I was ultimately able to work around this, and was eventually able to get Uninstall - Restore images to work.
I wrote about my workaround method here.
pdfruth said:
For whatever reason, whenever I would try to do Uninstall - Restore images (in step 3 of the OP), I would get a toast error saying "Stock backup does not exist"
I'm not sure why the expected backup files hadn't been created. I suspect it has to do with the process of manually patching the boot image whilst initially rooting, as suggested in this Git issue.
Anyway, I was ultimately able to work around this, and was eventually able to get Uninstall - Restore images to work.
I wrote about my workaround method here.
Click to expand...
Click to collapse
Yeah, there needs to be a backed up stock boot img for this to work. Being able to restore images the way stated in the issue would solve this as you could just restore a stock boot.img then continue doing the steps.
So does this work for every update? Just do the steps and it works? Im a complete noob when it comes to this stuff i just follow the write ups and pray!
DemonicMurderer said:
So does this work for every update? Just do the steps and it works? Im a complete noob when it comes to this stuff i just follow the write ups and pray!
Click to expand...
Click to collapse
Yes, it has worked for me all the time. These are the exact steps recommended by topjohnwu, I just made them more readibly available to users. Here is a link to his tutorial.
https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation
This work for the Verizon Pixel 4 XL???
SAMCR02018 said:
This work for the Verizon Pixel 4 XL???
Click to expand...
Click to collapse
Why would you need to since your not rooted with a locked bootloader? Just take the OTA.
Badger50 said:
Why would you need to since your not rooted with a locked bootloader? Just take the OTA.
Click to expand...
Click to collapse
Ok the can the Verizon version get the BL unlocked?
SAMCR02018 said:
Ok the can the Verizon version get the BL unlocked?
Click to expand...
Click to collapse
Nope. Unless you got lucky and they sold you a google version by mistake.
SAMCR02018 said:
Ok the can the Verizon version get the BL unlocked?
Click to expand...
Click to collapse
There is a write up for that.
Does anybody know if this also work with a custom kernel? I thought removing root and let magisk install old (boot) image should reinstall stock boot.img (if magisk first was installed through fastboot with stock kernel). Then i can take ota, patch inactive slot with magisk and then reboot. After reboot i can install custom kernel again througj ex kernel manager app. Does anybody know if this works?
Donric13 said:
Does anybody know if this also work with a custom kernel? I thought removing root and let magisk install old (boot) image should reinstall stock boot.img (if magisk first was installed through fastboot with stock kernel). Then i can take ota, patch inactive slot with magisk and then reboot. After reboot i can install custom kernel again througj ex kernel manager app. Does anybody know if this works?
Click to expand...
Click to collapse
Yes this method works with custom kernel. Magisk removed custom kernel when it restores stock boot.img
When does the dec patch come out, on the 5th?
I just started the process then realized it wasn't out yet so I haven't rebooted. When I go to the step of installing to the inactive slot I get a warning that you should only do this after the ota update - does anyone know if I'll be OK to go ahead with it even though I haven't done the ota yet?
in_dmand said:
When does the dec patch come out, on the 5th?
I just started the process then realized it wasn't out yet so I haven't rebooted. When I go to the step of installing to the inactive slot I get a warning that you should only do this after the ota update - does anyone know if I'll be OK to go ahead with it even though I haven't done the ota yet?
Click to expand...
Click to collapse
I wouldn't do it until the Dec ota comes out and that may be later today or sometime this week. Which is weird since all the other Pixels got it but hey it's Google
in_dmand said:
When does the dec patch come out, on the 5th?
I just started the process then realized it wasn't out yet so I haven't rebooted. When I go to the step of installing to the inactive slot I get a warning that you should only do this after the ota update - does anyone know if I'll be OK to go ahead with it even though I haven't done the ota yet?
Click to expand...
Click to collapse
Since it's not out yet, just do a direct install in Magisk to re-install it
Thanks for this guide !
Does anyone know how to update and maintain root for manually updating using OTA files ? Usually the update takes a long time to reach my phone, so I update using OTA files.
mkpansare said:
Thanks for this guide !
Does anyone know how to update and maintain root for manually updating using OTA files ? Usually the update takes a long time to reach my phone, so I update using OTA files.
Click to expand...
Click to collapse
The other way I update is using full factory images. Once you download the zip, extract it and find and open (via Notepad++ or similar advanced text editor) the flash-all.bat or flash-all.sh (depends on your system), find this line
fastboot -w update
replace with
fastboot update
Basically remove the -w, this will prevent a factory reset (wipe) on your device. Once it is done you will need to patch new boot.img via magisk and flash the newly patched boot.img via fastboot.
Hope this helps!
ps. I recommend to always disable Magisk Modules before updating as they could cause FC
eg1122 said:
Since it's not out yet, just do a direct install in Magisk to re-install it
Click to expand...
Click to collapse
Thanks that worked perfect... Was gonna be a long week without adblocker and lmt pie lol
So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots? I wish I could check but since my touch screen doesn't work in TWRP..
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?
kerelberel said:
So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, where do I download it, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots?
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?
Click to expand...
Click to collapse
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip
vinoxflame said:
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip
Click to expand...
Click to collapse
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
then try another version of twrp or the unofficial orangefox recovery for our device
vinoxflame said:
then try another version of twrp or the unofficial orangefox recovery for our device
Click to expand...
Click to collapse
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.
kerelberel said:
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.
Click to expand...
Click to collapse
it's on the telegram group
vinoxflame said:
it's on the telegram group
Click to expand...
Click to collapse
No it is not. There's no mention of G7 Power in the search results. Only E5.
kerelberel said:
No it is not. There's no mention of G7 Power in the search results. Only E5.
Click to expand...
Click to collapse
deleted
vinoxflame said:
https://t.me/mG7Power
tell me if it is not!!!!
Click to expand...
Click to collapse
From the desktop search in this one I couldn't find it: https://t.me/OrangeFoxRecovery I didn't know there was a separate chat for each device. But thanks.
FWIW when this happened to me I did the blankflash thing to get it back to bootloader. Then I used the LMSA tool from Motorola to do a rescue/restore.
I also used LMSA to force the update to the most recent security update. In general, it seems a very useful utility.
https://www.motorola.com/us/lenovo-motorola-smart-assistant
I had this issue after blankflashing this temperamental device out of a brick. While in twrp you can do "adb shell" then "twrp install /path/to/zip" I think this has to do with new twrp versions on older firmwares
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done.
---------- Post added at 06:06 PM ---------- Previous post was at 05:58 PM ----------
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done. The latest stock RETUS build i can find is here https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip but if i do that i will lose all my apps AGAIN etc I am trying to just get the stock recovery img from previous version so I can install the ota in magisk you just tap uninstall tap restore images to get stock boot as well then ota should work once its done go back into magisk and install to inactive slot but you will or could need TWRP A/B retention script so that you keep it even after ota...which you will first go in magisk tap uninstall restore images, but must have stock recovery not twrp installed at this time either from what i can tell, once ota is successful install the TWRP A/B Retention script but do this before you install magisk to inactive slot from magisk manager after that it should work. But I cannot locate a stock recovery.img thus far.... and I dont wanna redownload my apps right now, so I may just wait til I see a rom i really think ill like and say screw it.
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.
s33b said:
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.
Click to expand...
Click to collapse
I've flashed another stock rom (https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138) and it worked with twrp-3.3.1-0-ocean.img not with the newest.
kerelberel said:
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
Click to expand...
Click to collapse
You use fastboot commands in the bootloader.
The firmware contains a flash file with all fastboot commands you'll need.
kerelberel said:
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
Click to expand...
Click to collapse
TWRP has adb enabled by default. So instead of TWRP you can use
Code:
abd shell twrp --help
So you can use the basic functions like backup, install, and so on.
I had the same issue...
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.
TheGuysGuysGuy said:
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.
Click to expand...
Click to collapse
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)
roadkill42 said:
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)
Click to expand...
Click to collapse
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.
TheGuysGuysGuy said:
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.
Click to expand...
Click to collapse
The problem with the touch is the right driver needs to b installed that kernel I shared makes it work and stick I'm on it now go to tellagram group Moto g7 power support group both twrp and ofox there that works not the one from twrp it's self and the twrp there has some other features that one from official one has that don't work
This boot image gave me a touchscreen and allowed me to flash a regular twrp: hxxps://f.emvn.me/android-roms-and-stuff/twrp.3.4-kakarot.boot.img
Thanks to whoever made it.