Database Info

Downgrade from 9.0.2 to 9.0.1?

Hi, just tried to do this by flashing the old zip trough TWRP, but i always end to boot in recovery, maybe i'm doing something wrong...?

I tried this today and happened the same, i guess you have to clean flash to downgrade.
Also a tip, if you got stuck in recovery and yet cannot decrypt (doesn't ask for password/pin in TWRP), boot to fastboot mode, use the command "fastboot boot <the img file name for twrp>" so that you can boot directly to the img file from your PC. This way it will ask for your password.

Killua96 said:
Hi, just tried to do this by flashing the old zip trough TWRP, but i always end to boot in recovery, maybe i'm doing something wrong...?
Click to expand...
Click to collapse
You might try flashing again when you get booted back to TWRP. That way, you can get 9.01 flashed to both slots if it's not already. No guarantees, but it's worth a try.

maigre said:
You might try flashing again when you get booted back to TWRP. That way, you can get 9.01 flashed to both slots if it's not already. No guarantees, but it's worth a try.
Click to expand...
Click to collapse
I tried this way too but keep getting booted back to TWRP. Even did a wipe of the caches, system and data (not internal storage).
Is there anything I can still try?

jiatern said:
I tried this way too but keep getting booted back to TWRP. Even did a wipe of the caches, system and data (not internal storage).
Is there anything I can still try?
Click to expand...
Click to collapse
Flash Magisk again.

maigre said:
Flash Magisk again.
Click to expand...
Click to collapse
I did as well but it didn't help. Still the same.

jiatern said:
I did as well but it didn't help. Still the same.
Click to expand...
Click to collapse
Backup all your data outside the phone and flash a fastboot rom, it worked with me stuck in fastboot and I got back from that horrible 9.0.2

Killua96 said:
Backup all your data outside the phone and flash a fastboot rom, it worked with me stuck in fastboot and I got back from that horrible 9.0.2
Click to expand...
Click to collapse
Why horrible?

PuCiNhOOO said:
Why horrible?
Click to expand...
Click to collapse
Keyboard continuously crash 'cause the new gesture system, that have longer animations and the recent app one loses the vibration feedback and it' s also a lot confusing.
Anyway you can read the same things in the ota's thread, unfortunately are widespread problems

​
Killua96 said:
Keyboard continuously crash 'cause the new gesture system, that have longer animations and the recent app one loses the vibration feedback and it' s also a lot confusing.
Anyway you can read the same things in the ota's thread, unfortunately are widespread problems
Click to expand...
Click to collapse
I think they pushed the update too fast from beta to stable... But yes, agree with the gestures bug... Its a fact, but the other stuff is good

Killua96 said:
Backup all your data outside the phone and flash a fastboot rom, it worked with me stuck in fastboot and I got back from that horrible 9.0.2
Click to expand...
Click to collapse
Can you link me to the exact fastboot rom you flashed? Some said I have to use the downgrade zip from OnePlus to Oreo 5.1.1 then only upgrade to 9.0.1. The OP of the fastboot rom said the rom is not for downgrading.
Did you downgrade to Oreo first or directly flash the 9.0.1 fastboot rom?

jiatern said:
Can you link me to the exact fastboot rom you flashed? Some said I have to use the downgrade zip from OnePlus to Oreo 5.1.1 then only upgrade to 9.0.1. The OP of the fastboot rom said the rom is not for downgrading.
Did you downgrade to Oreo first or directly flash the 9.0.1 fastboot rom?
Click to expand...
Click to collapse
I've wiped everything, then downgraded to Pie directly, but I was in a slightly different situation (only fastboot available).
Just to be sure flash the Oreo one and then upgrade to Pie.

With the whole A/B partition layout it should be easier to downgrade too right?

No OS installed in TWRP

Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?

raptax said:
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
Click to expand...
Click to collapse
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data

Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again

raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
Exactly! I'm glad to had help you sometimes if something is done wrong TWRP is dangerous

raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
If you wipe system, then flash oos ROM, TWRP will think there is no os. You can just ignore and boot.

Wiping system then flashing any time will make twrp display "no os installed" it does this because it hasn't created files for twrp to check if you have a ton installed. Flashing twrp then rebooting to twrp fixes it.

Reboot to stock recovery?
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?

5xonlineage said:
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
Click to expand...
Click to collapse
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.

Fastboot method?
°Washy said:
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Click to expand...
Click to collapse
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.

5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.

5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
Do you solve, man?

Fastboot ROM
°Washy said:
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
Click to expand...
Click to collapse
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?

5xonlineage said:
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
Click to expand...
Click to collapse
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.

Magisk, boot img?
°Washy said:
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Click to expand...
Click to collapse
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?

5xonlineage said:
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
Click to expand...
Click to collapse
No. Just flash stock boot image if magisk broke something.

Rooted
°Washy said:
No. Just flash stock boot image if magisk broke something.
Click to expand...
Click to collapse
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!

5xonlineage said:
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
Click to expand...
Click to collapse
I followed that thread for the first A10 release cause there wasn't a worked twrp yet. You are welcome man, when I feel myself usefull I always try to help.

October image is up

I've always wanted to post one of these
https://developers.google.com/android/images

How do we flash the update and not lose data and root? All the guides are still for 9.0 for updates

Androider4Life said:
How do we flash the update and not lose data and root? All the guides are still for 9.0 for updates
Click to expand...
Click to collapse
There's a link to a how-to for 10 in the stickied how-to for 9 - https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117.
But without twrp I don't think there's a way to retain root, I think you'll need to go the route of patching the boot image with Magisk. But for data just remove the -w switch from flash-all, that should be the same.

kerobrat said:
There's a link to a how-to for 10 in the stickied how-to for 9 - https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117.
But without twrp I don't think there's a way to retain root, I think you'll need to go the route of patching the boot image with Magisk. But for data just remove the -w switch from flash-all, that should be the same.
Click to expand...
Click to collapse
I was looking thru that post and didnt wanna risk wiping the device. I just had to wipe a few days ago due to Edxposed bootloop issue lol

Ha, yeah, I feel your pain there, wiping is way too much of a pain to do that frequently

Androider4Life said:
How do we flash the update and not lose data and root? All the guides are still for 9.0 for updates
Click to expand...
Click to collapse
You can also flash the OTA file in stock recovery and not lose data.

spotmark said:
You can also flash the OTA file in stock recovery and not lose data.
Click to expand...
Click to collapse
Will it retain root or do you mean - https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation

Androider4Life said:
Retain root or have to re-root
Click to expand...
Click to collapse
Have to re-root using the Magisk method. Put stock boot on phone, patch boot with Magisk, put modded boot back on computer, and flash in fastboot. AFAIK, there is no way to retain root. Every time you flash the latest monthly patch, it flashes a new stock boot. Therefore, no root.

kerobrat said:
There's a link to a how-to for 10 in the stickied how-to for 9 - https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117.
But without twrp I don't think there's a way to retain root, I think you'll need to go the route of patching the boot image with Magisk. But for data just remove the -w switch from flash-all, that should be the same.
Click to expand...
Click to collapse
There's a way with taking the ota through settings I found out how from a user on here which is:
Once received the ota , go to magisk first uninstall/restore images then download/install ota then DONT REBOOT, go back to magisk install magisk to inactive slot from the app then reboot and all should work with new ota update and have root still.

What is this update 4.3mb

Once again, my phone got bricked. I wanted to sideload, so I tried to get it into recovery, it wouldn't, so I tried a few times, and decided screw it. Now my phone bootloops. So, download the image and try flashing, it won't go into fastboot and fails. No matter what I do, I can't seem to save it. Can anyone help me with this? I'm trying a different computer in a sec, but, not sure if that will work either.
Edit: The different computer doesn't see it... FML

gettinwicked said:
Once again, my phone got bricked. I wanted to sideload, so I tried to get it into recovery, it wouldn't, so I tried a few times, and decided screw it. Now my phone bootloops. So, download the image and try flashing, it won't go into fastboot and fails. No matter what I do, I can't seem to save it. Can anyone help me with this? I'm trying a different computer in a sec, but, not sure if that will work either.
Edit: The different computer doesn't see it... FML
Click to expand...
Click to collapse
Just flash the factory image or ota thru flash.all bat file after you do/did the necessary steps like extract the images etc to platform tools folder on ur pc
Or visit here for more help/steps
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-progress-available-t3876849
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117

gm007 said:
What is this update 4.3mb
Click to expand...
Click to collapse
Its just a security patch, we already had the updated rom in september, this just adds the latest security patch. Even though its only 4.3mb, its taking ages to patch, 10 mins still installing.

Jiggs82 said:
Just flash the factory image or ota thru flash.all bat file after you do/did the necessary steps like extract the images etc to platform tools folder on ur pc
Or visit here for more help/steps
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-progress-available-t3876849
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117
Click to expand...
Click to collapse
You missed the part where I did try flashing the image. I've done this a hundred times, so, I did it right.
Anyway, I got it. I didn't realize my work computer had a USB-C port, so, I grabbed one and tried flashing the image with that. Worked! Thank God... I guess sdk tools doesn't like a USB 1 to C cable, and my phone doesn't like going into recovery...

Androider4Life said:
How do we flash the update and not lose data and root? All the guides are still for 9.0 for updates
Click to expand...
Click to collapse
kerobrat said:
There's a link to a how-to for 10 in the stickied how-to for 9 - https://forum.xda-developers.com/pixel-3-xl/how-to/guide-pixel-3-xl-android-10-0-q-t3964117.
But without twrp I don't think there's a way to retain root, I think you'll need to go the route of patching the boot image with Magisk. But for data just remove the -w switch from flash-all, that should be the same.
Click to expand...
Click to collapse
If you are rooted flash the boot.img of the factory image you are currently on to both slots:
Code:
fastboot flash boot --slot all boot.img
Then Do #4 'keep Data'

Homeboy76 said:
If you are rooted flash the boot.img of the factory image you are currently on to both slots:
Code:
fastboot flash boot --slot all boot.img
Then Do #4 'keep Data'
Click to expand...
Click to collapse
I am starting to feel more and more like a lot of the bootloop issues are being caused by OTAs swapping slots on install. Besides the --slot all patched boot, it might help to run the OTA twice to get it to install to both slots completely. Preferably though, quit using OTAs and work with -w removed flash-all installer (and even then possibly installing to both slots with an active slot swap in between and before rooting). The double install is common when installing custom ROMs, and the process for OTA sideloads is pretty similar.

Performance improvement, feels smooth and responsive. Glad i dont need to root this phone, ppl are having so many problems.

boe323 said:
Its just a security patch, we already had the updated rom in september, this just adds the latest security patch. Even though its only 4.3mb, its taking ages to patch, 10 mins still installing.
Click to expand...
Click to collapse
My download was 1.3 gb and took forever to install. That's more than just the security patch.. Build number is different too.
Sent from my Pixel 3 XL using Tapatalk

Worked exactly the same as the 10 and .C3 builds for me. Flash-all (minus -w) and patched boot in Magisk. No issues. It was not just security this month. See the functional patches in the bulletin.
https://source.android.com/security/bulletin/pixel/2019-10-01

is there new platform tools too?

Unable to boot recovery after Android 10 Open Beta 1 OTA

Hi everyone!
Issue is pretty simple to explain - after upgrading via OTA from the latest open beta Pie (29) to open beta Android 10 (30), I can't boot into recovery.
System works normally, the only thing I'm having trouble with are the generic issues discussed on the OP community forum (autorotate and other sensors, Gboard gap...). It is recommended repeatedly that one should reboot to recovery and wipe the cache partition.
The problem is that I can only get into fastboot mode - tried the advanced boot menu, adb/fastboot and selecting recovery mode while in the fastboot mode but it always goes into fastboot.
TWRP doesn't support android 10 yet as far as I know and I've found no other reference of this issue anywhere else. Only thing that comes to mind is to wait for the next open beta and hope it will be resolved after another OTA.
Thanks for your help!

seems the open beta install was more bad for you than mine. Upgraded from op29 to op30 like you, but i had everything stock. No unlocked bootloader, no big customizations, etc. I just tried entering recovery mode via fastboot and it worked like normal for me, had to enter my pin to decrypt my data, and the rest like normal. I'd suggest to downgrade back to pie and reflash the open beta software to see if the issue is gone or not, but that's your call to do so.

HighOnLinux said:
seems the open beta install was more bad for you than mine. Upgraded from op29 to op30 like you, but i had everything stock. No unlocked bootloader, no big customizations, etc. I just tried entering recovery mode via fastboot and it worked like normal for me, had to enter my pin to decrypt my data, and the rest like normal. I'd suggest to downgrade back to pie and reflash the open beta software to see if the issue is gone or not, but that's your call to do so.
Click to expand...
Click to collapse
I think you stumbled across the answer everyone has been searching for. How did you upgrade? Did you download the whole zip and flash through updated?
This kinda makes sense. Do you remember how big the update file was? It could have been an incremental rather than a full if you weren't unlocked and thus (maybe) didn't change fastboot.

verbatim7 said:
Hi everyone!
Issue is pretty simple to explain - after upgrading via OTA from the latest open beta Pie (29) to open beta Android 10 (30), I can't boot into recovery.
System works normally, the only thing I'm having trouble with are the generic issues discussed on the OP community forum (autorotate and other sensors, Gboard gap...). It is recommended repeatedly that one should reboot to recovery and wipe the cache partition.
The problem is that I can only get into fastboot mode - tried the advanced boot menu, adb/fastboot and selecting recovery mode while in the fastboot mode but it always goes into fastboot.
TWRP doesn't support android 10 yet as far as I know and I've found no other reference of this issue anywhere else. Only thing that comes to mind is to wait for the next open beta and hope it will be resolved after another OTA.
Thanks for your help!
Click to expand...
Click to collapse
Had read somewhere that flashing stock boot.img will help restore stock recovery.. Have you tried doing that

brashmadcap said:
I think you stumbled across the answer everyone has been searching for. How did you upgrade? Did you download the whole zip and flash through updated?
This kinda makes sense. Do you remember how big the update file was? It could have been an incremental rather than a full if you weren't unlocked and thus (maybe) didn't change fastboot.
Click to expand...
Click to collapse
i grabbed the update file from this news article from xda itself: https://www.xda-developers.com/oneplus-android-10-oxygenos-beta-oneplus-6-6t/
the update zip was the full update and not incremental. i updated my device using the local device upgrader found under the system update settings to do the job for me.
Edit: this part down was meant for OP, sorry for confusion
so far when i updated last night, the auto rotate was tripping, until you mentioned that wiping the cache should do the trick (and it did do the trick thanks for that).
But back to your problem, you should try flashing the file under the link i put into this reply and if it doesn't work, just back up your data, downgrade back to pie, and flash the full update file that is present within that article and you should be back to normal

HighOnLinux said:
i grabbed the update file from this news article from xda itself: https://www.xda-developers.com/oneplus-android-10-oxygenos-beta-oneplus-6-6t/
the update zip was the full update and not incremental. i updated my device using the local device upgrader found under the system update settings to do the job for me. so far when i updated last night, the auto rotate was tripping, until you mentioned that wiping the cache should do the trick (and it did do the trick thanks for that).
But back to your problem, you should try flashing the file under the link i put into this reply and if it doesn't work, just back up your data, downgrade back to pie, and flash the full update file that is present within that article and you should be back to normal
Click to expand...
Click to collapse
Thanks for the idea. Unfortunately, it seems that having root and having recovery isn't possible for me at this point.
I've installed the OTA, got the recovery back and managed to wipe cache and everything worked - except I didn't have root. Then I've installed the magisk boot image to get back root, but then the same issues started happening and I was unable to access recovery.
Now I have to decide what's more important :crying:

Use an older version of magisk and you won't lose twrp

verbatim7 said:
Thanks for the idea. Unfortunately, it seems that having root and having recovery isn't possible for me at this point.
I've installed the OTA, got the recovery back and managed to wipe cache and everything worked - except I didn't have root. Then I've installed the magisk boot image to get back root, but then the same issues started happening and I was unable to access recovery.
Now I have to decide what's more important :crying:
Click to expand...
Click to collapse
how did u get back the recovery?

LazerH said:
how did u get back the recovery?
Click to expand...
Click to collapse
As stated above - just downloaded the OTA Android 10 update file for the right device, installed it and didn't install magisk to inactive slot and I had it back. If I tried to install magisk to keep root I didn't have the recovery mode. My guest guess is that magisk still isn't fully compatible with the new Android 10 boot changes.

verbatim7 said:
Thanks for the idea. Unfortunately, it seems that having root and having recovery isn't possible for me at this point.
I've installed the OTA, got the recovery back and managed to wipe cache and everything worked - except I didn't have root. Then I've installed the magisk boot image to get back root, but then the same issues started happening and I was unable to access recovery.
Now I have to decide what's more important :crying:
Click to expand...
Click to collapse
To me having a stable phone is much more important than a heavily modified device that's unstable at any given time. I'd say use the msm tool, flash back to a fresh build of pie, download the full open beta 30 zip, after its done flashing, reboot twice to iron out any present issues, then unlock the bootloader, and then you should be good to go. If you want root, just fastboot boot into twrp and flash the latest magisk zip and you're good to go. At the end you should have root, an unlocked bootloader, all while on the open beta android 10 build, with access to the stock recovery

Can u guys help me please, i just flashed by mistake with " fastboot flash boot" a TWRP enchilada file and now i'm stuck in fastboot and i cant boot ...i dont know how to factory reset or flash firmware from fastboot (

terrorblade23 said:
Can u guys help me please, i just flashed by mistake with " fastboot flash boot" a TWRP enchilada file and now i'm stuck in fastboot and i cant boot ...i dont know how to factory reset or flash firmware from fastboot (
Click to expand...
Click to collapse
Had the same problem. Flash this one: https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
OOS 10 Open Beta 1 Stock Boot

Schnullifax said:
Had the same problem. Flash this one: https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
OOS 10 Open Beta 1 Stock Boot
Click to expand...
Click to collapse
thanks..this is what i was looking for ...the problem is that now i'm in a boot loop , the dots keep spinning 4ever...and i did factory reset it from recovery
up1: i managed to install on slot a (i guess) Twrp.. but the whole memory is empty and i cant place anything (firmware) with pc on phone
formated data from twrp (to some format ntfc4 or smth like that ) and installed back android q and is working .

Unresponsive touch screen in TWRP - how can install a ROM?

So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots? I wish I could check but since my touch screen doesn't work in TWRP..
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?

kerelberel said:
So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, where do I download it, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots?
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?
Click to expand...
Click to collapse
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip

vinoxflame said:
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip
Click to expand...
Click to collapse
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.

kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
then try another version of twrp or the unofficial orangefox recovery for our device

vinoxflame said:
then try another version of twrp or the unofficial orangefox recovery for our device
Click to expand...
Click to collapse
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.

kerelberel said:
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.
Click to expand...
Click to collapse
it's on the telegram group

vinoxflame said:
it's on the telegram group
Click to expand...
Click to collapse
No it is not. There's no mention of G7 Power in the search results. Only E5.

kerelberel said:
No it is not. There's no mention of G7 Power in the search results. Only E5.
Click to expand...
Click to collapse
deleted

vinoxflame said:
https://t.me/mG7Power
tell me if it is not!!!!
Click to expand...
Click to collapse
From the desktop search in this one I couldn't find it: https://t.me/OrangeFoxRecovery I didn't know there was a separate chat for each device. But thanks.

FWIW when this happened to me I did the blankflash thing to get it back to bootloader. Then I used the LMSA tool from Motorola to do a rescue/restore.
I also used LMSA to force the update to the most recent security update. In general, it seems a very useful utility.
https://www.motorola.com/us/lenovo-motorola-smart-assistant

I had this issue after blankflashing this temperamental device out of a brick. While in twrp you can do "adb shell" then "twrp install /path/to/zip" I think this has to do with new twrp versions on older firmwares

kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done.
---------- Post added at 06:06 PM ---------- Previous post was at 05:58 PM ----------
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done. The latest stock RETUS build i can find is here https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip but if i do that i will lose all my apps AGAIN etc I am trying to just get the stock recovery img from previous version so I can install the ota in magisk you just tap uninstall tap restore images to get stock boot as well then ota should work once its done go back into magisk and install to inactive slot but you will or could need TWRP A/B retention script so that you keep it even after ota...which you will first go in magisk tap uninstall restore images, but must have stock recovery not twrp installed at this time either from what i can tell, once ota is successful install the TWRP A/B Retention script but do this before you install magisk to inactive slot from magisk manager after that it should work. But I cannot locate a stock recovery.img thus far.... and I dont wanna redownload my apps right now, so I may just wait til I see a rom i really think ill like and say screw it.

kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.

s33b said:
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.
Click to expand...
Click to collapse
I've flashed another stock rom (https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138) and it worked with twrp-3.3.1-0-ocean.img not with the newest.

kerelberel said:
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
Click to expand...
Click to collapse
You use fastboot commands in the bootloader.
The firmware contains a flash file with all fastboot commands you'll need.
kerelberel said:
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
Click to expand...
Click to collapse
TWRP has adb enabled by default. So instead of TWRP you can use
Code:
abd shell twrp --help
So you can use the basic functions like backup, install, and so on.

I had the same issue...
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.

TheGuysGuysGuy said:
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.
Click to expand...
Click to collapse
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)

roadkill42 said:
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)
Click to expand...
Click to collapse
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.

TheGuysGuysGuy said:
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.
Click to expand...
Click to collapse
The problem with the touch is the right driver needs to b installed that kernel I shared makes it work and stick I'm on it now go to tellagram group Moto g7 power support group both twrp and ofox there that works not the one from twrp it's self and the twrp there has some other features that one from official one has that don't work

This boot image gave me a touchscreen and allowed me to flash a regular twrp: hxxps://f.emvn.me/android-roms-and-stuff/twrp.3.4-kakarot.boot.img
Thanks to whoever made it.