Related
Hi there,
My currently installed Rom was RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe. (thank you jester for you good job)
Nevertheless, this ROM is in English and I wanted to downgrade to a French One before the selling of my device.
I have tried to install the downgrade kit detailed in this topic : http://forum.xda-developers.com/showthread.php?t=267344
The first step went OK but while trying to make the secnd step, my qtek is blocked at the boot splash screen showing the Jesterz picture and red information about the SPL and so on on the upper left corner... without starting... The USB connexion is not detected so I can't do anything... While trying to install any ROM, the USB connection is not detected ang I get an error message...
Did I kill my phone ?
Please help ! Tell me that it's not dead....
Don't worry, its nowhere close to being dead. If you have superCid, then use the SD card image to restore in bootloader mode. However, if the Cid is locked, then you would need a utility that can unlock Cid without Activesync mode (coz in your case, you would not be able to get an Activesync connection). imei-check.co.uk has a utility ($38 i guess) that unlocks Cid in bootloader.--- else show it to a professional. (in my country, I would have to shell out around $20 to get such a problem fixed at a mobile repair shop)
illanz said:
... The USB connexion is not detected so I can't do anything... While trying to install any ROM, the USB connection is not detected ang I get an error message...
Did I kill my phone ?
Please help ! Tell me that it's not dead....
Click to expand...
Click to collapse
Just take out the battery for about 10 minutes and re-insert. If it does not re-start, do a soft resert with the stylus and hopefully you should be fine
Hy,please help!
after downgrade, it doesnt work anymore.... i mean... i cant start the mobile!
after the downgrade i disable the USB data cable and now the mobile is dead... it doesnt starts from the ON/OFF Button and even if i connect the USB cable it makes nothing! No Led on... nothing! absolutly DEAD!!!
I have tried to put off the battery all night long with no result.. but I have achieved to reach the bootloader mode by pressing the camera button while soft reseting and keeping the camera button pushed...
OMG, I have been so scared ! ! !
Try this in order to reach the bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and KEEP PRESSING camara button till appear the Boot Loader.)
it doesnt work
I seem to have a simular problem. this is my post in another topic. It seems to fit better here.
This is what I tired so far:....
I used the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID and it often hangs and was slow with Push Email over GPRS.
I tried to find a way to downgrade but hadn't had time sofar. When I logged on XDA Developers Site I saw there was a new Image.
So I thought Great I dont need to find how to downgrade.
I don't know what G4 and G3 is so as everybody let's try the higest best one.
I uploaded the RUU-Prophet-G4-AKU3.3-Jester-b1
Wrong...
Now as previously stated I get to the multicolor screen with IPL 2.09 and the SPL 2.20..0001 on the screen and that's it.
I can get to the bootloader and load the same image again and get the same result.
I can load another image on and it loads to 80 Percent and says error [326] Invalid Command This NBF cannot be used with your PDA Phone. Please check your NBF file.
If I try an older Version it tells me upgrad only
And when I try to upload the G3 version it tells me error[300] invalid upgrade tool. This upgrade utility canot be used for your PDA Phone. Please get newer Upgrade utility.
Trying to use the nf.nbf or the G3 with the ROMUpdateUtility_NoID of the G4 doesn't work either.
If I would like to do the downgrade tool I need a Active Sync connection which I don't have.
I have no more thoughts. Please Help.
If you would have just read the forums better you would have known if your device is a G3 or a G4. (read this!).
Now it appears you have tried both for an update. Which may possibly have bricked your phone.
But... first things first. Can you get into the bootloader? (read wiki HERE on how to do that).
If you can still get into the bootloader then there is still a possibility for updating.
Try upgrading with the latest Qtek rom (note: this is an official rom, this one works for both G3 and G4! And since it's the latest you should be able to upgrade to this one).
Instructions quoted from another post of me:
You could try the 2.20 qtek rom which seems to be working well for quite some people (found here).
Although you have to make sure you read that thread good and use the ROMUpdateUtility_NoID.exe (found here ) to upgrade.
Update instructions:
1: With the qtek 2.20 rom you need to extract the zip and the exe file in the zip with WinRAR.
2: Then there is one folder called 'OutputFile' and a folder called 'RUU_TOOLS'.
Inside the RUU_TOOLS there is prophet and in that one WWE, when you go through them and in the WWE folder you see a bunch of files (readme.doc, enterbootloader.exe etc etc).
You need to copy ROMUpdateUtility_NoID.exe to the WWE folder with all the files. And you also need to copy the 'nk.nbf' file to the WWE folder (from the 'OutputFile' folder).
3: And then you need to put your phone in bootloader mode and run ROMUpdateUtility_NoID.exe to upgrade, which should work nicely then.
Click to expand...
Click to collapse
This should give you a good enough idea of what to do. This should work (new rom combined with no NoID updater).
However, if it's impossible to get yourself into the bootloader your options of upgrading your device are getting smaller.
Downgrading of a complete rom is only possible on a CID unlocked G3 (when it's CID unlocked you would know! because you would have done that yourself) and not on a G4 device.
Flasing a G3 device with a G4 rom or G4 device with a G3 rom might possibly turn your phone into a brick. This can easily be avoided by reading the forums properly and know what you are doing.
If anything (even if it's a small thing) is not completely clear to you about upgrading/downgrading your device I'd recommend not doing so.
edit: oh yeah... if you have a G4 device (which you should know by now) you cannot downgrade from this rom (well, only via a payed online service). And when you have a G3 device you could try and CID unlock it (read wiki + forums) before you want to downgrade, or don't downgrade at all.
But whatever you do, don't try to downgrade it without doing any of those things because you'll get into trouble. (to put it down bluntly)
illanz said:
I have tried to put off the battery all night long with no result.. but I have achieved to reach the bootloader mode by pressing the camera button while soft reseting and keeping the camera button pushed...
OMG, I have been so scared ! ! !
Click to expand...
Click to collapse
If you have reached the bootloader screen, just run my installer (or any official ROM) to get your phone working again.
My Prophet Died
I need help, to restore my Prophet, i upgrade wrong rom, i need will try the SD Backup, where can i see this process ?
Sorry my Inglish is too bad.
I've merged a couple of threads under this one, as they are all about the same problem (mostly)
Opening a new thread for the same problem isnt very useful
Hi RaptorRVL
Thank you very much for your patience in resuming all this for me.
I do try to read the forum but it isn't like a manual where you find the procedure stepby step. Like the G3 and G4 version I have newer come across until now. Sorry.
I tried the image you metioned and I have the result that at 80% it tells me error [326] Invalid Command This NBF cannot be used with your PDA Phone. Please check your NBF file
Any more thoughts?
As you seem to be an expert Can you let me know more about goldcard solution.
Cheers
Mick
From a readme I once found inside an update:
* ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
Click to expand...
Click to collapse
Doesn't sound too good really. Maybe someone else here on the forums know what to do with this error :/
You did use the ROMUpdateUtility_NoID.exe and not the normal updater right? Can remember someone getting a similar error when using the wrong updater, but I'm not sure about that though...
edit: try doing a search on the prophet forums for "INVALID COMMAND" maybe there is a helpful post in there somewhere...
THANKS!! I was worried b/c i had the same problem today. I've been looking for so many threads abt this problem. Thanks for ur help guys!
same problem
so i have the same problem. I want to downgrade and it break at 95% invalid file. But now XDA is still alive. I can`t go into the bootloader but i tried this file: RUU_Prophet_220734_2207114_024721_NVID.exe
and now my Prophet is still running again. Hope i can help you. Good luck.
peter paul
P.S. sorry for my english, but its good to learn it again
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
More detail please...
Isaygarcia said:
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
Click to expand...
Click to collapse
Are you at your Tri-Color Screen? If so...tell me what the screen says...also what device do you have a Tilt or a TyTN II
well when i was trying to flash the rom it not recognized it, then i disconected it and then enter in bootloader, and when it was flashing just stucked at 7% and said "ERROR 112 :CE Rom Update Error"
and now i cant flash anything, just stucks at the same 7%
its a Universal i know that it isnt a forum for that device but in the universal one just nobody answers =( and i guess that some people here has 1 uni too
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Isaygarcia said:
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Click to expand...
Click to collapse
What does your TRI-COLOR Screen say?
it says just usb and v1.0
it tries to flash and then stucks at 7%
new thing, when i try to flash an original rom, it says "error 100: model id error 22-N-50-N-N
please help!!
Can anyone help me please?? =(... i get an error 112, the rom just dont flash, it gets a 7% then the error appears, its an HTC Universal. i tried some things and even no results, theres a way to flash from SD? or it will be the same?? or maybe it got locked or something? or i just bricked it?? it enters to bootloader and it starts to flash and stuck on 7% TT-TT
Did you try a google search? I found this related to error 112...
Thanx, trying possible Fix!!
aahh it doesnt work... please can anyone help more??
tried to install the original stock rom and just wont work.. when the update reaches the CE update just stuck at 7% what can i do???
can i get some help? please =(
i searched on google, and i found that a some peolpe had this problem too, but, the same as me, nobody answers. its time to throw away my universal?
Not to sound mean, but you could try spamming the Universal forums instead of the Kaiser forums. I know there are a lot of people on the Kaiser forums, but we're Kaiser users. Odds are you'll get better information in the correct forums because the people there have the same hardware...just a thought.
close this thread plz
OK,
I have a Universal, and here are some ideas and questions:
1. Give the exact name of the ROM you are trying to use. Do not put "the original one," or "Fred's rom." Put the EXACT NAME of the ROM that you are upgrading to, and a link to it.
2. Stop. Take a breath. Throwing away your Universal will not solve the problem.
3. Give exact step by step description of what happened. Start from, "I was using my Universal with XXXXXXX ROM and the world was fine, and then I downloaded the ROM given in item #1 above. I then did (whatever you did). Continue on. End with "I am now stuch at 7%"
4. I noticed that you are from Mexico. I am from the USA, so some colloquilisms may not translate well. (Plus my Spanish is horrible). Let's just stick to the facts.
To be quite honest, your posts are not helpful, and they sound like a drowning man clutching an anvil (see last Sunday's Dilbert...). It would be more helpful if you could be more forthright and specific as to the issue, and give those wanting to help you as much detail as possible.
I am willing to help, but help me help you.
I have searched for ENDLESS hours how to unroot my g2. I want to unroot it and return it to gingerbread 2.3.4.....!!!
I have tried EVERYTHING, and I'm stuck.
I encounter many problems such as
-When I try to boot through boot recovery and it loads the PCIMG10.zip file, it doesn't let me update it! It loads it, and it just goes straight back to the boot loader screen
-When I try to change my build number from 1.22.531.8 back to 1.19.153.1 it never changes. I hex edit the misc.img file, but when I open it, the hex editor reads it as already 1.19.153.1, even though my phone says 1.22.531.8!!
Somebody please help me!! I've tried tons of tutorials, ones with and without using ADB
bump!
Can someone please help me?! I haven't found a way to unroot my phone and I'm extremely desperate!!
SAME PROBLEM!!
i have double checked after i apply the new misc.img AND IT IS 1.19.153.1
100%
Once i try to apply the PCIMG10.zip my phone returns to s-on but the update fails!
then if i check the hex it has returned to 1.22.531.8???
I Have re-rooted to s-off and tried again....AGAIN...and again making slight changes along the way yet no success??
WTF AM I DOING WRONG???
http://www.addictivetips.com/mobile/how-to-unroot-t-mobile-g2-htc-desire-z-complete-guide/ have you tried this or tutorials on youtube on how to unroot the g2
hi im a little stuck when i try to flash the rom to my hd2 i keep getting error message usb init failed and enter bootloader missing ive tried different roms but still keep getting same messages yes im a noob so be gentle with me lol
to know for sure what your doing wrong, we need a lot more info than that, My advice is to start again and read each instruction carefully in whatever process your following. and if that doesnt work utfse for one that does.
Hi everyone. I've got some trouble with my phone (HTC One A9s) and I really hope there's somebody out there who could help me, I'm kind of desperate.
I've got TWRP recovery, unlocked bootloader and S-ON.
So here's what happens: I had been flashing some stuff on my phone with TWRP recovery, and hours after that, my SIM card just stopped getting any signal. My cell phone only said "No service" "Emergency calls only". So, thinking it happened because of the things I had flashed (it was just emoji updates for my keyboard, I really doubt now that it caused the problem), I started looking for solutions. And I made the worst mistake ever: I started wiping some stuff on TWRP recovery… and then I realized I also wiped the OS. So obviously now I can't turn on my cell phone, I can only boot it on TWRP recovery, download mode or bootloader. Since HTC One A9s is a pretty rare model, there's not much information about it on the internet. But I could find some stock ROMs in .zip format, and I tried installing them one by one by renaming them and putting them in my external SD card and entering download mode. None of them worked. One showed a CID mismatch error, another one showed a MID mismatch error, and the other two showed RU header errors.
So now I've been trying to figure out what I could do:
1. I could try to install the ROM that showed a CID mismatch error if I could modify the CID itself, but I can only do that with S-ON, and I can only get it if I have root and the cell phone on, which I can't do because I have no OS.
2. I could keep looking for a stock ROM that actually worked, but I think there aren't any more apart from the ones I already found.
3. From what I've read, I could try to edit the android-info.txt file of the ROMs that showed a mismatch error, but I just don't know where and how to find that file.
I really really need help please. I'm desperate, I know I made a huge mistake and I don't know how to fix it now. Please help me :crying: :crying: :crying: