Related
Hi everyone im stuck on the resurection of my device (moto g 2013 8GB updated to 5.1 with [5.1 GPE 1 click] from This forum.
I've tried everything or almost for now, cant get it out of that loop.
*Battery pulling.
*hard buttons combinations.
*fastboot and ADB. (not in fastboot mode so.. And as i did flash de 1click before the loop USB Dbgn isn't enabled)
*i think i've tried every toolkit on this forum.
*Raped google search for over a week trying every posible method-
*Only thing left is to take it to church for a blessing. but im not a believer D:
ADD: i've rooted with a "boot.img" from this forum i think it was a 2015 file.
before this i had not 1 issue with the phone. just unlockd the bootloader a few days ago and updated to 5.1 from 5.0.2 becouse of a wifi issue (unknow mac adress) i had to reboot it like 10 times until it appeared again (original mac adress from device, still wrote it down i have it somewhere.)
I think this would be my first post on this forum and it took me over a week to do it becouse this (asking you-comunity) is my last resource.
PS: i had it going betwen 5.0.2 and 5.1 like 4 times to try solving the wifi issue.. only thing it got me was the "line" on the screen like if it where a problem with vertical sync. (i think you are all very familiar with that issue after downgrading the kernel i think.)
the phone just turns it self on everytime. (everytime)
i was able to boot into recovery before the last flash touching the place were the hardware volume button goes (with a neddle) untill it didnt workd anymore and i send it to a store to repair the volume rockers. still no recovery or bootloader boot.
my pc (laptop with 7-32bit recognices it as xt1032. and the one with xp as MTP.)
I've installed every posible thing that i found to bring it back to life even the android sdk full every pkg from 5.0.2 to 5.1 and extras, Motorola drivers and ADB. tried online searching automated from windows and listing it from a folder with the google one. tried adding the hardware manualy and have every ADB thing that i found on device mng but everyone is wit a yellow triangle. (No USB Debuging enabled so why bother anymore.)
I think that's about it.
You seem to be making things massively over-complicated.
Flash latest TWRP from here: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Example fastboot command:
fastboot flash recovery twrp.img
If you cannot enter TWRP, use ONLY this fastboot command:
fastboot erase userdata
Via TWRP, flash latest GPE Optimized ROM from here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
i m sorry for my english, isnt my native lang. And for making it over complicated.
i cant enter fastboot mode or give any order to the phone trough fastboot on a console.
I have installed a TWRP touch, just cant acces it. dont know if it is the hardware button (Vol -) or what.
so it dosnt show up on fastboot devices nor adb devices.
am i not understanding something ?
Thanks for replying and taking the time to help!
Enter fastboot mode by turning on phone while holding Volume Down.
lost101 said:
Enter fastboot mode by turning on phone while holding Volume Down.
Click to expand...
Click to collapse
tried again just in case. No luck, wont boot into recovery or bootloader mode. vol (-) or power and vol (-)
it just "tries" to boot up normaly and gets stuck on "android starting" untill "initializing apps" 4 colours flying and reboots again.
dieguitwow1 said:
tried again just in case. No luck, wont boot into recovery or bootloader mode. vol (-) or power and vol (-)
it just "tries" to boot up normaly and gets stuck on "android starting" untill "initializing apps" 4 colours flying and reboots again.
Click to expand...
Click to collapse
If the volume rocker is not broken, then you should be able to enter fastboot mode. Hold power button until phone turns off completely.
If the volume rocker is not broken, then you should be able to enter fastboot mode. Hold power button until phone turns off completely.
Click to expand...
Click to collapse
did that, tried pulling the battery off and holding the keys (down and power or just vol down) and starting it. no way it goes into bootloader or recovery. When i do any of those things the phone just powers back up it self and boots into system or tries to, and get stuck in bootloop.
Im gonna try a gtag cable or something like that tomorrow from a friend. would it work to send it to bootloader or recovr?
dieguitwow1 said:
did that, tried pulling the battery off and holding the keys (down and power or just vol down) and starting it. no way it goes into bootloader or recovery. When i do any of those things the phone just powers back up it self and boots into system or tries to, and get stuck in bootloop.
Im gonna try a gtag cable or something like that tomorrow from a friend. would it work to send it to bootloader or recovr?
Click to expand...
Click to collapse
You said you had the volume rocker repaired - but it seems at least, vol down is not working. I have no experience with jtag kits or commands.
lost101 said:
You seem to be making things massively over-complicated.
Flash latest TWRP from here: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Example fastboot command:
fastboot flash recovery twrp.img
If you cannot enter TWRP, use ONLY this fastboot command:
fastboot erase userdata
Via TWRP, flash latest GPE Optimized ROM from here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
Click to expand...
Click to collapse
lost101 said:
Enter fastboot mode by turning on phone while holding Volume Down.
Click to expand...
Click to collapse
lost101 said:
You said you had the volume rocker repaired - but it seems at least, vol down is not working. I have no experience with jtag kits or commands.
Click to expand...
Click to collapse
i think it's not repaired properly, or the last time i flashed it fastboot might have send a command like "fastboot normalboot" or something like that. Would that be stoping me from entering recovery mode or fastboot?
dieguitwow1 said:
i think it's not repaired properly, or the last time i flashed it fastboot might have send a command like "fastboot normalboot" or something like that. Would that be stoping me from entering recovery mode or fastboot?
Click to expand...
Click to collapse
If you power phone off completely, then no commands are remembered. The button is broken.
lost101 said:
If you power phone off completely, then no commands are remembered. The button is broken.
Click to expand...
Click to collapse
Thanks! so, what should i do now? is there any way to fix it or bypass it ?
i was "touching" the button with a niddle until it stoped working is there a fix for it? :fingers-crossed:
dieguitwow1 said:
Thanks! so, what should i do now? is there any way to fix it or bypass it ?
i was "touching" the button with a needle until it stopped working is there a fix for it? :fingers-crossed:
Click to expand...
Click to collapse
Sorry, I can't help you with that. If you know someone good with a soldering iron, maybe they can fix it - otherwise, try another repair shop.
its still seen by my PC with XP. As xt1032 on the bootloop can i do something ? moto device mngr starts with de Moto logo on the sys tray..
dieguitwow1 said:
its still seen by my PC with XP. As xt1032 on the bootloop can i do something ? moto device mngr starts with de Moto logo on the sys tray..
Click to expand...
Click to collapse
adb reboot bootloader
lost101 said:
adb reboot bootloader
Click to expand...
Click to collapse
even if "USB Debuging" isn't enabled?
Edit: Result= [ Error: device ´<null>´ not found ]
dieguitwow1 said:
even if "USB Debuging" isn't enabled?
Edit: Result= [ Error: device ´<null>´ not found ]
Click to expand...
Click to collapse
Yes, USB Debugging would need to be enabled.
lost101 said:
Yes, USB Debugging would need to be enabled.
Click to expand...
Click to collapse
so, apart from taking it to repair again for the button, what can i do?:fingers-crossed:
dieguitwow1 said:
so, apart from taking it to repair again for the button, what can i do?:fingers-crossed:
Click to expand...
Click to collapse
I am not aware of any other options.
i managed to recover the phone it works normaly but screen goes off and on all the time, every 5 sec. Except on Bootloader Mode.
dieguitwow1 said:
i managed to recover the phone it works normaly but screen goes off and on all the time, every 5 sec. Except on Bootloader Mode.
Click to expand...
Click to collapse
What has changed? Did you get the vol button fixed?
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Works entrance for the recovery (Vol+ and Vol- and Power)?
rakrakrak said:
Works entrance for the recovery (Vol+ and Vol- and Power)?
Click to expand...
Click to collapse
No bro...
eusagc said:
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Click to expand...
Click to collapse
What happens when you do a Vol up + power?
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
eusagc said:
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Ok dude, will do. Thanks!
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
CloudCompute said:
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
eusagc said:
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Click to expand...
Click to collapse
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
CloudCompute said:
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
Click to expand...
Click to collapse
That's correct bro. Although it appears from adb that I was able to install the stock recovery, I cannot access it with Vol+ and power.
CloudCompute said:
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
Click to expand...
Click to collapse
Yes, I did. And I can't even boot to bootloader after all that... The phone only seems to charge, but is stuck at the logo.
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
stinka318 said:
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
Click to expand...
Click to collapse
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
eusagc said:
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
Click to expand...
Click to collapse
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
eusagc said:
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
Click to expand...
Click to collapse
Go ahead, send it to Huawei service centre. They'll have ways to reach the internal memory after opening up the device.
stinka318 said:
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
Click to expand...
Click to collapse
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
eusagc said:
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
Click to expand...
Click to collapse
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
eusagc said:
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
Click to expand...
Click to collapse
All well now?
CloudCompute said:
All well now?
Click to expand...
Click to collapse
I was out of town for the past few weeks and didn't have time to do this. I'm back now and plan to work on this tonight. Thank you bro, I'll let you know how it goes...
Hi,
I have a problem with my Nexus 5, it bootloop on the Google Logo
I try to put a little piece of paper behind the power button and also to click on the power button a lot of times during the boot but it still stuck..
What can I do to try fix it ?
Thanks in advance
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
matgras said:
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
Click to expand...
Click to collapse
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
nathan30 said:
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
Click to expand...
Click to collapse
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
matgras said:
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
Click to expand...
Click to collapse
Did you try this solution or not ? To know if I can try to do it
nathan30 said:
Did you try this solution or not ? To know if I can try to do it
Click to expand...
Click to collapse
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
matgras said:
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
Click to expand...
Click to collapse
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
nathan30 said:
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
Click to expand...
Click to collapse
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
matgras said:
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
Click to expand...
Click to collapse
I can't have the phone booting, so I have to wait the new button ^^
nathan30 said:
I can't have the phone booting, so I have to wait the new button ^^
Click to expand...
Click to collapse
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
opssemnik said:
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
Click to expand...
Click to collapse
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
nathan30 said:
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
Click to expand...
Click to collapse
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
opssemnik said:
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
Click to expand...
Click to collapse
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
nathan30 said:
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
Click to expand...
Click to collapse
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
opssemnik said:
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
Click to expand...
Click to collapse
Oh i didn't understand, thanks a lot it's working
Now I'm just waiting my new power button
i had this **** sorry for swearing i thought its something with my ROM CM13 Nightly I tried the repair service they said that they changed the power button no data was deleted so its probably the button but some one had a guide how to get the phone out that **** using your PC and manual ADB commands ( No program command line only )
I need help with this issue
when this problem reached me it was a meter of replacing the power button itself (it's like stuck there) by the way my phone was still under warranty so they changed it for me
https://www.ifixit.com/Answers/View/208337/How+do+I+fix+a+Nexus+5+Power+Button+Issue
https://www.aliexpress.com/store/pr...821-NEW-Free-Shipping/629458_32289287372.html
https://www.aliexpress.com/popular/nexus-5-on-off-switch.html
If that helped you dont forget to press the thank you button
Hi,
I was on Android N and decided to go back to KangVip Slim trough my TWRP Backup. So i opened the Bootloader again and flashed TWRP. But restoring of my backup failed and i started to wipe and delete in TWRP different things. I think i erased to much...
The result is, that now i the phone is booting to Huawei Logo and stucked there. All button-combinatios don't work.
No stock recovery, no dload method and the worst thing...no bootloader mode (USB connected to PC). The phone just reboot to the Huawei Logo.
I opened the phone, remove the battery cable, put it back, but it's still the same. I also discharged the battery and charged again. Same result, it boots just to the Huawei logo.
Is there any thing i could try to bring back to life or is it hardbricked?
Thanks in advance for any idea..
AL10 or L29,L09 to you have?
With AL10 version is easy to go back.
Install Android N again in Twrp.
Install Stock Recovery.
Go Back with Hi Suite.
Your open your Phone to reboot?
Press Power Button 10 sec. to reboot after reboot press 3 sec. to boot in eRecovery and shot down the Phone.
After Power off press Volume Down and hold and put in the Usb Cable in the Phone.
After this boot in Bootloader.
Flash Twrp for android N and wipe Cache,Dalvik,Data and System.Then flash Android N in Twrp.
Hi,
i have a L29. No TWRP, no bootloader mode to flash anything.
What happens when you switch off,then Power on and Press so long Volume up until the erecovery starts?
This must work!
Nothing, just reboot to the Huawei logo. I think there is no e-recovery installed.
Tavros said:
Nothing, just reboot to the Huawei logo. I think there is no e-recovery installed.
Click to expand...
Click to collapse
letschky said:
What happens when you switch off,then Power on and Press so long Volume up until the erecovery starts?
This must work!
Click to expand...
Click to collapse
Let me add one more step. Connect your phone to the computer via usb cable then switch off your phone. Press and hold Vol up + Power. Release it when you see Huawei logo.
Hope this will enable you to enter eRecovery.
Good luck
I tried that, but no success..
I think the Mate 8 is the first phone that i have brick...
I have the same issue too. L29. No TWRP, no bootloader mode to flash anything. Hopefully someone can guide us through this
Good news..
After I put the phone aside a few days and the battery has completely discharged, I connected the phone with my PC and tried to get into the fastboot mode.
I tried this before, without success. I was shocked when I saw the bright screen! It was in fastboot mode. I did not expect that. I left it untouched until the battery was charged a little bit.
Then i started to flash the NXT-L29C432B560 Firmware. It wasn't possible to do it with the "dload" method, so installed twrp-3.0.3.img and flashed the firmware with TWRP. For help use: https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c185b560-official-t3556789.
And now it works fine, like never something happend.
So all of you with same problem: Give it a try.
Now i have two babies.. Mate 8 and Mate 9. I will keep both....:good:
HI i have my mate 8 in the same conditons that you used to! please help me im desperate it doesnt even get on fastboot mode. Please I would appreciate your help thanks
dexz said:
Let me add one more step. Connect your phone to the computer via usb cable then switch off your phone. Press and hold Vol up + Power. Release it when you see Huawei logo.
Hope this will enable you to enter eRecovery.
Good luck
Click to expand...
Click to collapse
Hello!
I can do that with my mate 8, but only things i can access are erecovery, stock recovery and dload mode. neither of them work.
dcds_dck said:
I have the same issue too. L29. No TWRP, no bootloader mode to flash anything. Hopefully someone can guide us through this
Click to expand...
Click to collapse
Had this problem with L09. I've been trying to fix it all the week long.
If you can access dload mode, follow this guide:
https://forum.xda-developers.com/mate-8/general/huawei-mate-8-downgrade-android-7-0-to-t3530999
If your phone is not NXT-L09, search for NXT-XXX (XXX= your phone model) rollback. It will surely work.
How can I get my Galaxy Note 20 Ultra out of stuck at 'entering fastboot mode'?
Hold down power and volume down until it reboots back to recovery. I got stuck there last week and that's what worked for me.
Sent from my SM-N986U1 using Tapatalk
Is this problem solved? I cannot boot into bootloader mode, thanks!
Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode
shantanil said:
Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode
Click to expand...
Click to collapse
Download mode is different from fatboot mode, I can enter, and works ok download mode. However, fastboot does not, it gets stuck in entering fastboot mode and no fastboot command works
I got same issue here, I've tried rooting via TWRP and after data wipe and "reboot to recovery" it got stuck in same thing and doesn't move at all, if I hold power and vol down it just boots the device which i dont want since i need to flash magisk as a last step. if anyone encountered this or knows how to fix it i'd be helpful
I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it
adj998 said:
I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it
Click to expand...
Click to collapse
Yea I fixed it somehow I don't even know myself
i cant eneter into download mode by using volume up and volume down ... the only thing that happens is the battery display kicks in .. is there a trick on how long to hold the volume bottons .. or any special way of doing it .. or for the usb c while trying to connect it to the computer
it gets stuck into fastboot entering if i try to do it the old fashion way .. please help
Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.
leonardo_evaldy said:
Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.
Click to expand...
Click to collapse
Thanks Man. This worked.
Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?
I m having the same problem with a21s(a217f). I can t enter download mode using key combinations and the other way launching it from recovery doesn t work, it stays stuck at,, entering fastboot mode,,
The ROM is already bricked, it says in recovery when i try to factory reset the following error:,, can t mount. /system (structure needs cleaning)
Even with,, apply up. with adb,, doesn t work, it just doesn t get detected on my computer when i checked with adb tools.
! The only thing that works is that I can access my sd card and apply a update from sd card but I don t know where to get the update file. (I ll edit if it works to flash stock rom from,, apply update from sd card,, )
Anybody got some ideas or should i burn my motherboard and replace it?
sorry for bad english
Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.
ivoe said:
Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.
Click to expand...
Click to collapse
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..
Volume up & down, no side key, then connect to PC. Works for me. Connect to PC first does not work for me.
guru96 said:
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..
Click to expand...
Click to collapse
It wouldn't be deleted as it's a safety protocol if the device has a bad update and freaks out.
Maybe try to person above method.
Normally I can enter download mode with any of these methods if you cannot I'd suggest trying to get the device replaced due to software malfunction
altojd said:
Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?
Click to expand...
Click to collapse
Samsung phones use a tool called Odin to flash firmware. If you're flashing custom firmware firmware you'll need to have your bootloader unlocked.
I got mine into download mode just now. It's a Galaxy A13 .. Like stated above, try to hold all three buttons down and connect to USB. I had to let go before it showed the battery charge icon. From off. If not from off try from charging. I think that's what I did just now. Plug the usb -> let it show the charging icon (from powered off!) -> hold all three buttons, let it power on, let go. DONE.
just follow this video it helped me a lot to unlock my boot loader