Related
Hi im new to these forums
Anyway, on my HTC i am currently stuck on the bootloader screen. If I press recovery or anything it just shows the "HTC" logo screen and boots back to the bootloader. What do I do anyone? I think my ROM has been wiped
BilalH said:
Hi im new to these forums
Anyway, on my HTC i am currently stuck on the bootloader screen. If I press recovery or anything it just shows the "HTC" logo screen and boots back to the bootloader. What do I do anyone? I think my ROM has been wiped
Click to expand...
Click to collapse
Hi,
Are you s-off?
Did you wipe your old ROM?
What have you done?
What are you trying to do?
A little more information is quite useful to those who want to help...
malybru said:
Hi,
Are you s-off?
Did you wipe your old ROM?
What have you done?
What are you trying to do?
A little more information is quite useful to those who want to help...
Click to expand...
Click to collapse
Hi
I'm S-ON.
I think I accidently wiped my old rom
Im trying to get back to the stock ROM i Just want my phone working agian.
BilalH said:
Hi
I'm S-ON.
I think I accidently wiped my old rom
Im trying to get back to the stock ROM i Just want my phone working agian.
Click to expand...
Click to collapse
flash an RUU - go into hboot and find out what ROM version you were running before (by using fastboot getvar mainversion) then find an RUU with the same or higher version number and download then run it.
BilalH said:
Hi
I'm S-ON.
I think I accidently wiped my old rom
Im trying to get back to the stock ROM i Just want my phone working agian.
Click to expand...
Click to collapse
Jonny said:
flash an RUU - go into hboot and find out what ROM version you were running before (by using fastboot getvar mainversion) then find an RUU with the same or higher version number and download then run it.
Click to expand...
Click to collapse
Hi when I put in "fastboot getvar mainversion" in command prompt it says
C:\Users\amd>fastboot getvar mainversion
getvar:mainversion FAILED < remote: unknown command >
finished. total time: 0.008s
I was currently using official fw 4.0.3 with sense 3.6 before
BilalH said:
Hi when I put in "fastboot getvar mainversion" in command prompt it says
C:\Users\amd>fastboot getvar mainversion
getvar:mainversion FAILED < remote: unknown command >
finished. total time: 0.008s
I was currently using official fw 4.0.3 with sense 3.6 before
Click to expand...
Click to collapse
Then your safe just to download the 3.33.401.6 RUU and it should flash no problems
BilalH said:
Hi
I'm S-ON.
I think I accidently wiped my old rom
Im trying to get back to the stock ROM i Just want my phone working agian.
Click to expand...
Click to collapse
Hi,
As has been mentioned, flashing a RUU will get you back to a working phone.
Look HERE
Jonny said:
Then your safe just to download the 3.33.401.6 RUU and it should flash no problems
Click to expand...
Click to collapse
Ah thanks Il give this a try, previously Ive tried download 3.32 RUU's and theyve all said its the wrong version. Downloading from filefactory right now, taking a long time unfortuantly, 2 hours Thanks
Just downloading this RUU
RUU_PYRAMID_ICS_HTC_Europe_3.33.401.6_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_266171_signed.exe
Hi
I tried the RUU and get the following error
ERROR [130]: MODEL ID ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM Update Utitlity and try again.
My current RUU says im on 3.32.206.112 and I pressed update, the update went on for a while and this error popped up.
BilalH said:
Hi
I tried the RUU and get the following error
ERROR [130]: MODEL ID ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM Update Utitlity and try again.
My current RUU says im on 3.32.206.112 and I pressed update, the update went on for a while and this error popped up.
Click to expand...
Click to collapse
Hi,
You are using the wrong RUU.
Check the link I gave you earlier to find your CID,and the correct RUU,and how to install it.
malybru said:
Hi,
You are using the wrong RUU.
Check the link I gave you earlier to find your CID,and the correct RUU,and how to install it.
Click to expand...
Click to collapse
Hi thhere been searching trying to find my RUU but I cant seem to find it
My CID is 02_001, therefore o2
CAn you link me to the RUU I need? Thanks
BilalH said:
Hi thhere been searching trying to find my RUU but I cant seem to find it
My CID is 02_001, therefore o2
CAn you link me to the RUU I need? Thanks
Click to expand...
Click to collapse
Hi,
Have you tried taking a general European RUU and Adding your CID to the PGIMG.zip
It is 4.2 in the guide.
malybru said:
Hi,
Have you tried taking a general European RUU and Adding your CID to the PGIMG.zip
It is 4.2 in the guide.
Click to expand...
Click to collapse
Hi Ive tried following the method.
when I get up to the part where you have to type 'fastboot flash zip PG58IMG.zip it says this:
C:\android-sdk-windows\tools>fastboot flash zip PG58IMG.zip
sending 'zip' <432384 KB>...
OKAY [56.745s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature fail)
finished. total time: 130.818s
BilalH said:
Hi Ive tried following the method.
when I get up to the part where you have to type 'fastboot flash zip PG58IMG.zip it says this:
C:\android-sdk-windows\tools>fastboot flash zip PG58IMG.zip
sending 'zip' <432384 KB>...
OKAY [56.745s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature fail)
finished. total time: 130.818s
Click to expand...
Click to collapse
Hi,
I am not sure why you are trying to flash the PG58IMG
Can you not change the text file in the PG58IMG and then run the RUU from your PC.
Make sure your phone is in fastboot,then connect your USB cable,(it should say "fastboot USB" ) then,run the RUU.
malybru said:
Hi,
I am not sure why you are trying to flash the PG58IMG
Can you not change the text file in the PG58IMG and then run the RUU from your PC.
Make sure your phone is in fastboot,then connect your USB cable,(it should say "fastboot USB" ) then,run the RUU.
Click to expand...
Click to collapse
Hi yes I have changed the 'android-info.txt' file in PG58IMG but now what do I do? The PG58IMG.zip is in my android-sdk/tools folder.
BilalH said:
Hi yes I have changed the 'android-info.txt' file in PG58IMG but now what do I do? The PG58IMG.zip is in my android-sdk/tools folder.
Click to expand...
Click to collapse
Hi,
You do not need to extract the PG58IMG
Just open it,change it,and close it.
It remains zipped,and you can run the RUU.
malybru said:
Hi,
You do not need to extract the PG58IMG
Just open it,change it,and close it.
It remains zipped,and you can run the RUU.
Click to expand...
Click to collapse
Okay let me start from the top, where exactly do I find this PG58IMG.zip? Thanks.
Btw another question, is there a way for me to charge my phone because my battery says its below 30% if I try to install an RUU
Paste the output for
Code:
fastboot getvar all
Remove the IMEI number & serial number from the output.
I'll link you to the right RUU or tell you what else you can try.
For now, don't do anything else.
You cannot flash a modified RUU because you are S-ON; so changing the android-info file will not help.
kgs1992 said:
Paste the output for
Code:
fastboot getvar all
Remove the IMEI number & serial number from the output.
I'll link you to the right RUU or tell you what else you can try.
For now, don't do anything else.
You cannot flash a modified RUU because you are S-ON; so changing the android-info file will not help.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.206.112
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4052mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.505s
Yeah so which RUU do I need or what do I need to do?
BilalH said:
(bootloader) version-main: 3.32.206.112
(bootloader) product: pyramid
(bootloader) modelid: PG5813001
(bootloader) cidnum: O2___001
(bootloader) security: on
Yeah so which RUU do I need or what do I need to do?
Click to expand...
Click to collapse
I don't think there is any O2 ICS RUU let alone 3.32 & you're S-ON, so can't flash a lower RUU.
But fortunately, all is not lost. Let's try this.
Please type these commands one after the other & paste the whole output for everything:
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
fastboot getvar cid
It's okay if any of them fail, you must execute all three commands one after the other & paste the output.
hi im using Viper s
sense 5
i got a couple of problems
first i got bootloops
when i first flashed it
so tried different kernels
like viper 3.0.0 3.1.0 3.1.1 3.1.2...
and so on all of them
luckily viper 3.1.1 Kernel Worked
so i flashed it and the camera dose not load when i ht the camera app it launches but show black screen and the closes
no notifications or anything
also wifi is bricked (
rom is pretty smooth and great btw
im on S-off firmware 3.33
hboot 1.27.11< something like that
recovery i have is latest touch http://forum.xda-developers.com/showthread.php?t=2542506
latest TWRP
had CWM tried switching to this one no joy ://
Please help i don't want my love my sensation phone to die i've been holding it for some time now "years"
and it served me well i want to keep it at least until HTC releases a newer version of HTC ONE like the M8 or something like that
Thank you team Venom ARHD Cyanogem mod for keeping this phone alive
and thank's to everyone who tries to help me <3
Love Bio .:good::good::good::good:
biohazzard9 said:
hi im using Viper s
sense 5
i got a couple of problems
first i got bootloops
when i first flashed it
so tried different kernels
like viper 3.0.0 3.1.0 3.1.1 3.1.2...
and so on all of them
luckily viper 3.1.1 Kernel Worked
so i flashed it and the camera dose not load when i ht the camera app it launches but show black screen and the closes
no notifications or anything
also wifi is bricked (
rom is pretty smooth and great btw
im on S-off firmware 3.33
hboot 1.27.11< something like that
recovery i have is latest touch http://forum.xda-developers.com/showthread.php?t=2542506
latest TWRP
had CWM tried switching to this one no joy ://
Please help i don't want my love my sensation phone to die i've been holding it for some time now "years"
and it served me well i want to keep it at least until HTC releases a newer version of HTC ONE like the M8 or something like that
Thank you team Venom ARHD Cyanogem mod for keeping this phone alive
and thank's to everyone who tries to help me <3
Love Bio .:good::good::good::good:
Click to expand...
Click to collapse
Update recovery to 4ext and then flash vipers 5
Don't flash other kernel. .
Itsakash said:
Update recovery to 4ext and then flash vipers 5
Don't flash other kernel. .
Click to expand...
Click to collapse
i've tried no help
but thanks for the help
anymore tips you got ?
biohazzard9 said:
i've tried no help
but thanks for the help
anymore tips you got ?
Click to expand...
Click to collapse
flash the boot.img of viperS 5 rom
rzr86 said:
flash the boot.img of viperS 5 rom
Click to expand...
Click to collapse
i've all related viper kernels that are Jelly bean Including the original boot.img Viper 5.0.0
biohazzard9 said:
i've all related viper kernels that are Jelly bean Including the original boot.img Viper 5.0.0
Click to expand...
Click to collapse
ok redownload the viperS ROM and flash it
if it fails again format your sdcard
note: use 4ext for viper 5
sorry double post
rzr86 said:
ok redownload the viperS ROM and flash it
if it fails again format your sdcard
note: use 4ext for viper 5
Click to expand...
Click to collapse
already did that download but used different SD card like a blank one
and still no help..
thanks for the help
anymore fixes ?
biohazzard9 said:
already did that download but used different SD card like a blank one
and still no help..
thanks for the help
anymore fixes ?
Click to expand...
Click to collapse
this happens only with vipers 5 rom?
post the out put of this command
fastboot getvar all
rzr86 said:
this happens only with vipers 5 rom?
post the out put of this command
fastboot getvar all
Click to expand...
Click to collapse
it happens with revolutionary the one similar to viper 3
sense 4.x Jellybean From sebastianFM
i'm guessing it's because they have the same kernel
-----------------------------------------------------------------------------------
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: *****************************
(bootloader) imei: *************************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.491s
-------------------------------------------------------------------------------
i don't know mate
try this use an ruu.exe
then install 4ext again
then the rom
see how it goes
note: remove your imei and serial number
rzr86 said:
i don't know mate
try this use an ruu.exe
then install 4ext again
then the rom
see how it goes
note: remove your imei and serial number
Click to expand...
Click to collapse
thanks for the help
appreciate it
might give that a go
Strange :what:
If other roms works den no use of ruu
I'm out of idea
Hmm
Check md5 of downloaded Rom and flash with all default option( don't select anything ,just accept t&c )
If above method not work den try rzr68s suggestion
Itsakash said:
Strange :what:
If other roms works den no use of ruu
I'm out of idea
Hmm
Check md5 of downloaded Rom and flash with all default option( don't select anything ,just accept t&c )
If above method not work den try rzr68s suggestion
Click to expand...
Click to collapse
MD5 is OK
i believe its a kernel issue
Thanks for the help might give that a go
My HTC One SV (LTE europe version ) stuck while booting, it displays white logo screen only,
now i unlocked bootloader and tried to flash rom, but failed,
How i can flash a custom rom or original oerating systedm in my phone,
please help me.
anpayy said:
My HTC One SV (LTE europe version ) stuck while booting, it displays white logo screen only,
now i unlocked bootloader and tried to flash rom, but failed,
How i can flash a custom rom or original oerating systedm in my phone,
please help me.
Click to expand...
Click to collapse
Can you get into the bootloader? If you can, you can flash TWRP recovery via fastboot and flash a custom Rom with the recovery.
Yes
thearif said:
Can you get into the bootloader? If you can, you can flash TWRP recovery via fastboot and flash a custom Rom with the recovery.
Click to expand...
Click to collapse
i can get into bootloder, but where can i get TWRP recovery and custom rom file ?
anpayy said:
i can get into bootloder, but where can i get TWRP recovery and custom rom file ?
Click to expand...
Click to collapse
Go to http://forum.xda-developers.com/showthread.php?t=2292432 . Read through and find the recovery there. It is pretty well explained there. I am on my mobile so I am not sure of the link will take you to the first page. It is on the first page. Make sure you get the correct recovery for your phone model.
Original rom
Where i can get original ROM for HTC ONE SV LTE k2ul_4.2.2_3.11.401.1 ???
anpayy said:
Where i can get original ROM for HTC ONE SV LTE k2ul_4.2.2_3.11.401.1 ???
Click to expand...
Click to collapse
That I do not know, but if my memory serves me right, there was a thread either in android development or general sections with the latest OTAs. You might wanna search for that...
anpayy said:
Where i can get original ROM for HTC ONE SV LTE k2ul_4.2.2_3.11.401.1 ???
Click to expand...
Click to collapse
You've already got the link to my index thread, but it seems you are to lazy to have a look at it. You even only need to watch for the software number and you will easily find what you are searching for.
Os intallation failed
i tried to install OTA update through TWRP recovery , but it failed
You can't flash this in recovery. Use TWRP recovery and flash the rom (not the Ota). Links are in my index thread.
Installed rom
Sucessfully instaled Viper SV rom,
but still phone did not booting,
Did you also flash boot.img of the rom in fastboot?
no
I missed to boot boot.img,
Now phone is working perfectly...........
Thanks all........specially old.splatterhand & thearif
Nice
anpayy said:
I missed to boot boot.img,
Now phone is working perfectly...........
Thanks all........specially old.splatterhand & thearif
Click to expand...
Click to collapse
Good to hear that...
Hi all,
I'm new in this forum so I post there.
My problems starts after try to updete htc one sv k2_ul. After update I get red triangle and then my phone freezed on white screen with logo.
Try to do factory reset from bootloader, but nothing happen. After few days looking information I unlock bootloader and try flash new boot, but after that I get Tampered. I found if I must s-off, but how I can get it? My pc found phone only on fastboot mode. Any ideas?
miegas said:
Hi all,
I'm new in this forum so I post there.
My problems starts after try to updete htc one sv k2_ul. After update I get red triangle and then my phone freezed on white screen with logo.
Try to do factory reset from bootloader, but nothing happen. After few days looking information I unlock bootloader and try flash new boot, but after that I get Tampered. I found if I must s-off, but how I can get it? My pc found phone only on fastboot mode. Any ideas?
Click to expand...
Click to collapse
You can't get S-off, without working OS.
You don't have an OS anymore on your phone?
Are you running a custom recovery like TWRP?
Run this fastboot cmd and copy the output here (remove your imei & serial number):
Code:
fastboot getvar all
old.splatterhand said:
You can't get S-off, without working OS.
You don't have an OS anymore on your phone?
Are you running a custom recovery like TWRP?
Run this fastboot cmd and copy the output here (remove your imei & serial number):
Code:
fastboot getvar all
Click to expand...
Click to collapse
My os just stop working.
I don't try TWRP, today will look more about that.
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 1.15.40a.00.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.401.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4143mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.075s
edit
I flashed TWRP and I make restore, but phone won't start anyway. Maybe need to flash new os?
Flash the stock rom in TWRP, and don't forget to flash boot.img of the rom in fastboot.
Links are in my index thread.
Make a backup in recovery (just in case) and a wipe (advanced -> everything except int & ext sdcard) before.
old.splatterhand said:
Flash the stock rom in TWRP, and don't forget to flash boot.img of the rom in fastboot.
Links are in my index thread.
Make a backup in recovery (just in case) and a wipe (advanced -> everything except int & ext sdcard) before.
Click to expand...
Click to collapse
Something I make wrong. I flashed TWRP, then installed ViperSV, phone restarted and booted TWRP. Then I found boot.img in yours index thead.
Then in fastboot flashed new boot, but phone still booting in TWRP. What I make wrong?
You need to flash the boot.img thats inside the ViperSV.zip, not any from my index thread.
Hello everyone;
Am new here... but I read all threads related to my problem for almost 5 days of trying .However, I learn alot from you guys and now I think am becoming experts LOL . I mean I started know what S-off/S-on/root /unlock/.....etc
Thank you for all the people who share their knowledge .:good::good:
Let Start, ....... I bought HTC sensation xe and after I upgrade to ICE I face Wifi problem and restart problem so I try to root it using ARHD!!
My phone was originally :
Locked/
S-off/
Hboot 1..29/
frimework 3.33.415...../
so I got through all steps of rom : unlocked process >>fast boot flashing recovery.img >>wip data>>and flash ARHD room ===== did not work(it stuck in HTC logo screen)
I try to read ...read read ..and then I deiced to change the framework and use universal framework 3.33..
I download the PG58IMG.zip file and check Md5 and put inside sdc and bootloader and I update it..and reboot ... so my cfrimework phone say :
-frimwork-3.33-
S-off RL
Hboot 1.27.1100
Radio-11.24A.3504.311_M
OpenADSP-v05.6.0.2226.00.0418
eMMs-boot
Jan 13 2012
Hboot
....
so I start again carefully and check the Md5 for ARHD 7.3 which was right. and start again as following :
delete the file PG58IMG.zip
open recovery wipe data>delete all partition except sdc
install zip file from sdc
chose ARHD , after checking md5.
instuall the rom
get back to recovery screen and chose Reboot Now..
Boot and HTC logo screen will appear and no thing happen after
NOT WORKING
Am sick and tired of trying ... i want to take the challange and try more i bouht this phone 5 day ago,....Any help or guaid Plz ??
omansz said:
Hello everyone;
Am new here... but I read all threads related to my problem for almost 5 days of trying .However, I learn alot from you guys and now I think am becoming experts LOL . I mean I started know what S-off/S-on/root /unlock/.....etc
Thank you for all the people who share their knowledge .:good::good:
Let Start, ....... I bought HTC sensation xe and after I upgrade to ICE I face Wifi problem and restart problem so I try to root it using ARHD!!
My phone was originally :
Locked/
S-off/
Hboot 1..29/
frimework 3.33.415...../
so I got through all steps of rom : unlocked process >>fast boot flashing recovery.img >>wip data>>and flash ARHD room ===== did not work(it stuck in HTC logo screen)
I try to read ...read read ..and then I deiced to change the framework and use universal framework 3.33..
I download the PG58IMG.zip file and check Md5 and put inside sdc and bootloader and I update it..and reboot ... so my cfrimework phone say :
-frimwork-3.33-
S-off RL
Hboot 1.27.1100
Radio-11.24A.3504.311_M
OpenADSP-v05.6.0.2226.00.0418
eMMs-boot
Jan 13 2012
Hboot
....
so I start again carefully and check the Md5 for ARHD 7.3 which was right. and start again as following :
delete the file PG58IMG.zip
open recovery wipe data>delete all partition except sdc
install zip file from sdc
chose ARHD , after checking md5.
instuall the rom
get back to recovery screen and chose Reboot Now..
Boot and HTC logo screen will appear and no thing happen after
NOT WORKING
Am sick and tired of trying ... i want to take the challange and try more i bouht this phone 5 day ago,....Any help or guaid Plz ??
Click to expand...
Click to collapse
probably you need to update your recovery version but i suggest to use 4ext recovery
http://d-h.st/rG7
extract the recovery.img and flash it via fastboot command
@rzr86 hi..thank for answer
is that file a zip or application ? who to extract it ?
and then do I do the room again or what ?
@rzr86
oky I manage to update recovery....but know am getting this
4ext not configured and it ask me for 4etx updater.....and as far i know this can only done by play store...
any idea ???
omansz said:
@rzr86
oky I manage to update recovery....but know am getting this
4ext not configured and it ask me for 4etx updater.....and as far i know this can only done by play store...
any idea ???
Click to expand...
Click to collapse
Dont worry bout that warning, just press ok. Its just when u get the app u have a few more settings/options to play with.
When u flash a rom make sure in recovery u go to wipe/format and format all partitions except sdcard then flash the rom. The rom should boot no problem then.
@jmcclue
Oky I ignore it I flash rom by install from zip sd card ...it reboot and get back to the recovery screen
and get the same message :
The recovery has not been configured! Use 4etx Recovery Control or the free app updater.which is available on 4etx.net to setup the recovery and to unlock configurable features.
Hints: check out recovery setting
and I chose power off from recovery and switch on after that and always it get me back to that screen
also when i go to Info>i can see the
Current rom: Android Revolution HD 7.3 X
omansz said:
@jmcclue
Oky I ignore it I flash rom by install from zip sd card ...it reboot and get back to the recovery screen
and get the same message :
The recovery has not been configured! Use 4etx Recovery Control or the free app updater.which is available on 4etx.net to setup the recovery and to unlock configurable features.
Hints: check out recovery setting
and I chose power off from recovery and switch on after that and always it get me back to that screen
also when i go to Info>i can see the
Current rom: Android Revolution HD 7.3 X
Click to expand...
Click to collapse
try this
enable/disable smartflash
then see if you still have this message
rzr86 said:
try this
enable/disable smartflash
then see if you still have this message
Click to expand...
Click to collapse
I try that tooo it was enable and I disable it reboot dosenot work..or should i install rom again?
@jmcclue Or my Recovery is wrong it say v1.0.0.6 RC2 testing....I get it somewhere..because the one you gave it to me was .exe ..I did not know how to flash it ... any details//
omansz said:
I try that tooo it was enable and I disable it reboot dosenot work..or should i install rom again?
@jmcclue Or my Recovery is wrong it say v1.0.0.6 RC2 testing....I get it somewhere..because the one you gave it to me was .exe ..I did not know how to flash it ... any details//
Click to expand...
Click to collapse
try again flashing the recovery.img via fastboot command
then try to flash the rom
rzr86 said:
try again flashing the recovery.img via fastboot command
then try to flash the rom
Click to expand...
Click to collapse
1- oky here what I did ...i use this fourm to get recovery as zip ....http://forum.xda-developers.com/showthread.php?t=1377759&page=86 but i dont know if this is valid file or not (md5 mayby is not valid)
2- So extract the file put inside new file name PG58IMG with androied-info text file so I can recover with Bootloader...
I load it and have Know 1.0.0.6 RC3 .... And I still got the message ...I ignore it
3. I wipe data and cach
4.room
5.rebort
stop in screen logo ...
So should i throng me new phone ?
omansz said:
1- oky here what I did ...i use this fourm to get recovery as zip ....http://forum.xda-developers.com/showthread.php?t=1377759&page=86 but i dont know if this is valid file or not (md5 mayby is not valid)
2- So extract the file put inside new file name PG58IMG with androied-info text file so I can recover with Bootloader...
I load it and have Know 1.0.0.6 RC3 .... And I still got the message ...I ignore it
3. I wipe data and cach
4.room
5.rebort
stop in screen logo ...
So should i throng me new phone ?
Click to expand...
Click to collapse
it is valid but it is old version
use the one i gave you
it is the latest
also use the format all partitions except sdcard option
then reflash the rom
see how it goes
rzr86 said:
it is valid but it is old version
use the one i gave you
it is the latest
also use the format all partitions except sdcard option
then reflash the rom
see how it goes
Click to expand...
Click to collapse
Oky will do that ,,,,,But the problem is your link gave me exe file I did not know how to use it ...
sorry ....can you explain.. ...
omansz said:
Oky will do that ,,,,,But the problem is your link gave me exe file I did not know how to use it ...
sorry ....can you explain.. ...
Click to expand...
Click to collapse
nope it isn't exe
it is a zip file
extract from the zip the recovery.img and flash it
rzr86 said:
nope it isn't exe
it is a zip file
extract from the zip the recovery.img and flash it
Click to expand...
Click to collapse
no it is not .....
can you check again
omansz said:
no it is not .....
can you check again
Click to expand...
Click to collapse
Click the "download now" button and it downloads as .zip file, i just checked. The recovery u have installed is not the latest but that doesnt matter when ur flashing ARHD.
Steps... Go to
Wipe/format
Format all partitions except sdcard
Flash rom
Reboot
It should boot but u MUST format all partitions except sdcard, not just cache or that because that does not wipe the system partition.
jmcclue said:
Click the "download now" button and it downloads as .zip file, i just checked. The recovery u have installed is not the latest but that doesnt matter when ur flashing ARHD.
Steps... Go to
Wipe/format
Format all partitions except sdcard
Flash rom
Reboot
It should boot but u MUST format all partitions except sdcard, not just cache or that because that does not wipe the system partition.
Click to expand...
Click to collapse
Ok i did every thing us you said
f
lash recovery ...and it show the same message..i ignore it ....
wipe format
Format all partitions except sdcard
flash room
reboot....
Now I see HTC logo screen swich on....and switch off....loop boot ....
what should I do now??
should I take the off the battery.
omansz said:
Ok i did every thing us you said
f
lash recovery ...and it show the same message..i ignore it ....
wipe format
Format all partitions except sdcard
flash room
reboot....
Now I see HTC logo screen swich on....and switch off....loop boot ....
what should I do now??
should I take the off the battery.
Click to expand...
Click to collapse
fastboot getvar all
post everything except imei and serial number
rzr86 said:
fastboot getvar all
post everything except imei and serial number
Click to expand...
Click to collapse
THIS IS ....MY POOR PHONE : (
C:\AndroidSDK\tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.11
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: SH1CXV800141
(bootloader) imei: 359118044360243
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG58*****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3699mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.495s
C:\AndroidSDK\tools>
I ALSO TRY flash boot.img via fastboot from pc...NOT WORKING
i don't see anything wrong
do this
redownload ARHD rom or try with other custom rom
rzr86 said:
i don't see anything wrong
do this
redownload ARHD rom or try with other custom rom
Click to expand...
Click to collapse
HMMMM
i DOWNLOAD FROM HERE ..http://forum.xda-developers.com/showthread.php?t=1098849
Is that old ....or not valid ??? or there is new version ...
am worry to go through another rom us I take so much time to understand every thing with this one
or you can recommened another rom which is easy ....am new to HTC..
or maybe I have to send the phone to you lol ....
@Mike1986 maybe you can help ????
Q&A for [ROM][JB][Sense 5][23.05] SaM ROM | Sense 7 Blinkfeed
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][JB][Sense 5][23.05] SaM ROM | Sense 7 Blinkfeed. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Best Sense Rom!
In my opinion I think this is the best Sense based rom for our c2!
It has the best battery life!
A big thank from me @Mikhei777 !!
bugs of this rom
1-if you can improve battery life
2-gapp not working( crashed)
man my phone has wifi problwem and i try it so hard to fix it but i can't pls help me
enesgaliba said:
man my phone has wifi problwem and i try it so hard to fix it but i can't pls help me
Click to expand...
Click to collapse
Maybe you won´t flash boot.img from fastboot? thats the main cause of wifi not working
Great rom!
But the reason why venom rom was good was its customizability.
Please introduce changing cpu governors, clock speed etc
Don't get me wrong...this is a superb rom!
Hello everybody !! Because I want to install this custom rom, but I'm new and I want to ask if anyone has the opportunity to make video how to install I would be very grateful.
Maxkiller89 said:
Hello everybody !! Because I want to install this custom rom, but I'm new and I want to ask if anyone has the opportunity to make video how to install I would be very grateful.
Click to expand...
Click to collapse
i thinking do it.. but im busy.. maybe at the weekend.. but its very easy .
unlock your bootloader via HTCDev
flash the mikhei777 recovery (are in SaM ROM thread).. download... reboot your phone in bootloader and flash the recovery...
copy the rom.zip in sdcard and reboot in recovery..
install the zip...
reboot in bootloader and flash de bootVILLEC2.img
reboot your phone and its ready .
if you don't understand what is fastboot and how to flash the files... maybe you need wait for a detail tutorial...
JavierG123 said:
i thinking do it.. but im busy.. maybe at the weekend.. but its very easy .
unlock your bootloader via HTCDev
flash the mikhei777 recovery (are in SaM ROM thread).. download... reboot your phone in bootloader and flash the recovery...
copy the rom.zip in sdcard and reboot in recovery..
install the zip...
reboot in bootloader and flash de bootVILLEC2.img
reboot your phone and its ready .
if you don't understand what is fastboot and how to flash the files... maybe you need wait for a detail tutorial...
Click to expand...
Click to collapse
Yes, but I think to wait for a detail tutorial from you. Тhank you again.
Maxkiller89 said:
Yes, but I think to wait for a detail tutorial from you. Тhank you again.
Click to expand...
Click to collapse
men... im sorry... im very busy... you can try follow this guide http://forum.xda-developers.com/showthread.php?t=2175411
wI fI
i can't active to wifi.
says error.
any idea?
rmva01 said:
i can't active to wifi.
says error.
any idea?
Click to expand...
Click to collapse
do you flash boot.img from fastboot after install the rom?
Who can put this ROM to s4 . very nice rum. Thank you . If that can be very good.
Browser not working
I just downloaded and installed Sam ROM.
Everything working fine but I am not able to use browser. Stock browser and chrome both not working. they are crashing with the error message on opening.
Sorry for my bad english
Truth is the first rom I taste and is very good and fluid, thank you very much , the only small mistakes I've seen are:
1. Application My themes HTC closes when wanting to see the introduction slide
2. It works fine when I put a USB with OTG adapter, but I don't know why not detect my TV tuner ( PADTV ) .
3. When I want to charge my phone, being off, I don't know what goes on, the phone turn on and enters the recovery
ceylas said:
Who can put this ROM to s4 . very nice rum. Thank you . If that can be very good.
Click to expand...
Click to collapse
The rom works fine on the S4 in 2.15 the patch is in the post of rom
http://forum.xda-developers.com/htc-one-s/development/rom-rom-classic-sense-7-blinkfeed-t3234570
I can set these attributes with my terminal HTC ONE S
Hello I wonder if this rom is compatible with my terminal and if not so, what do you recommend installing, here fighting in my first flash
C:\Android>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.09.4444
(bootloader) version-baseband: 1.15.50.05.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: F**********9
(bootloader) imei: 3*************9
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4127mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) 3.17.599.3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s
Sometimes when I turn on the phone recently , I play a song and then entered the google page (using Chrome) THROUGH the Bookmarks widget , my phone crashes and restarts.
hello guys I ask help to you, I was on liberty sense before now are passed to this beautiful rom, but I have problem calling with Skype and whatsapp, how can I fix?
I used this rom 1 year period but recently when I update this rom don't work gallery don't work google chrome and random restart when i used any app. please fix this rom it is perfectly for this device. ??
Enviado desde mi HTC One S mediante Tapatalk