Related
This is guide for those who want to install ViperS Roms on there sensation and don't know how to do that and what are the requirements.
NOTE:I WILL NOT BE RESPONSIBLE IF YOU BRICK YOUR DEVICES
REQUIREMENTS For HTC Sensation S-Off/S-ONand ROOTED
1.Get latest 4EXT Recovery link and if you are S-ON then enable smartflash berfore flashing
2.Firmware 3.33 Universal link (RADIO included)
3.ViperS JB Sense 5 Rom link OR ViperS JB Sense 4+ Rom link OR ViperS ICS Rom link (RIL included in the ROM)
4. Put the downloaded ROM on the root of the SD card and a brain
STEPS FOR ViperS 5.0.0 JB
1.Boot into Recovery
2.Make a Nandroid backup
3.Wipe data/factory reset(Format /system,/cache,/data,etc)
4.Wipe Dalvik & Cache
[enable smart-flash before flashing] FOR S-ON users ONLY
5.Flash ROM [VIPERS JB ROM]
6.DONE
Only Sebastian kernel can be used with ViperS JB ION which is included in the ROM
STEPS FOR ViperS 3.1.4 JB
1.Boot into Recovery
2.Make a Nandroid backup
3.Wipe data/factory reset(Format /system,/cache,/data,etc)
4.Wipe Dalvik & Cache
[enable smart-flash before flashing] FOR S-ON users ONLY
5.Flash ROM [VIPERS JB ROM]
6.DONE
Only Sebastian kernel can be used with ViperS JB ION which is included in the ROM
STEPS FOR ViperS 2.0.0 ICS
1.Boot into Recovery
2.Make a Nandroid backup
3.Wipe data/factory reset(Format /system,/cache,/data,etc)
4.Wipe Dalvik & Cache
[enable smart-flash before flashing] FOR S-ON users ONLY
5.Flash ROM [VIPERS ICS ROM]
6.done
kernel is included in the ROM and if u want u can flash your own kernels
ADDITIONAL GUIDES
[Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on
[RADIO][RIL][July 2 2012] Sensation Radio/RIL files
[Guide] Root Official ICS ROM HBoot 1.27.000 Easely without S-Off
[GUIDE] Flashing roms with S-ON and 1.27+ HBOOT
How To | Unlock Booloader | HBOOT S-Off | Flash Recovery | Root | Sensation
HIT THE THANKS BUTTON IF THIS INFORMATION IS HELPFULL
thx
THX man this helped me alot i was very confuse:good:
Simple and concise guide. You could maybe run us trough the Aroma installer options and such. I recommend doing the full HTCDev unlock, SOFF and root for trouble free installation. Installing any custom ROM without SOFF is quite a risk for bricking or at least disabling your device as far as I can see.
5ageman said:
Simple and concise guide. You could maybe run us trough the Aroma installer options and such. I recommend doing the full HTCDev unlock, SOFF and root for trouble free installation. Installing any custom ROM without SOFF is quite a risk for bricking or at least disabling your device as far as I can see.
Click to expand...
Click to collapse
it doesn't bring any brick after a false installation in S-ON devices but only it is not booting
that's why all of us who are S-ON are using 4ext recovery(smartflash)
where Firmware 3.33 Universal is needed?
i have s-off .. couln't i flash ViperS_1.6.0.zip directly from recovery (using option "install from sd card")?
Angel2k6 said:
where Firmware 3.33 Universal is needed?
i have s-off .. couln't i flash ViperS_1.6.0.zip directly from recovery (using option "install from sd card")?
Click to expand...
Click to collapse
3.33 or 3.32 firmware is highly require to run vipers roms otherwise there will be many problems such as bootloop ,rom does not boot etc so please do that
Latest ViperS 1.6.0 FM Radio working correctly?
realceday said:
Latest ViperS 1.6.0 FM Radio working correctly?
Click to expand...
Click to collapse
Yes this is a bug and the team has solved it will be fixed in the v1.6.1 kk
Sent from my HTC using Tapatalk 2
I wanna ask, i move on from RevolutionHD and i changed my Ril and Radio version so i try to fine in threads which is best Radio and Ril. I mean a lot of users try it but no one wrote who is fit better i really have to change mine cus were for other Rom. If you can update your post and with that information will be perfect.
P.S.
Add this if you want to first post :
[Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on
[RADIO][RIL][July 2 2012] Sensation Radio/RIL files
[Guide] Root Official ICS ROM HBoot 1.27.000 Easely without S-Off
[GUIDE][NOOB PROOF]How to Flash Custom Roms with S-ON
How To | Unlock Booloader | HBOOT S-Off | Flash Recovery | Root | Sensation
ludutu said:
I wanna ask, i move on from RevolutionHD and i changed my Ril and Radio version so i try to fine in threads which is best Radio and Ril. I mean a lot of users try it but no one wrote who is fit better i really have to change mine cus were for other Rom. If you can update your post and with that information will be perfect.
P.S.
Add this if you want to first post :
[Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on
[RADIO][RIL][July 2 2012] Sensation Radio/RIL files
[Guide] Root Official ICS ROM HBoot 1.27.000 Easely without S-Off
[GUIDE][NOOB PROOF]How to Flash Custom Roms with S-ON
How To | Unlock Booloader | HBOOT S-Off | Flash Recovery | Root | Sensation
Click to expand...
Click to collapse
The newer ICS ROMs generally require you to flash the corresponding firmware first. The firmware includes the radio and the RIL is included in the ROM! So you do not need to flash a new radio/RIL pair unless you want to change it.
and if every one require these guides then iw ill add them
hi
i'm s-on in Firmware 3.32.531.14
my correct rom is android RevolutionHD 6.8.0
my questions is :
ViperS Roms work on Firmware 3.32 ?
is there any ways for update Firmware for s-on phone ?
and at last in your mind which one ?
RevolutionHD or ViperS
thanks
bestgmx said:
i'm s-on in Firmware 3.32.531.14
my correct rom is android RevolutionHD 6.8.0
my questions is :
ViperS Roms work on Firmware 3.32 ?
is there any ways for update Firmware for s-on phone ?
and at last in your mind which one ?
RevolutionHD or ViperS
thanks
Click to expand...
Click to collapse
yes viper ROM works on 3.32 and even in 3.33 u can flash it:good: . i will see if u can update your firmware if u are s on [i think its not possible but i will look ]
EDIT-If you are S-ON the only way you can update is through an official RUU or OTA update. Else the firmware packages only work on S-OFF. The only difference between 3.32 and 3.33 are all radio related items if that helps at all. All 3.33 roms run on 3.32 firmware with no issues.
Harbir said:
yes viper ROM works on 3.32 and even in 3.33 u can flash it:good: . i will see if u can update your firmware if u are s on [i think its not possible but i will look ]
EDIT-If you are S-ON the only way you can update is through an official RUU or OTA update. Else the firmware packages only work on S-OFF. The only difference between 3.32 and 3.33 are all radio related items if that helps at all. All 3.33 roms run on 3.32 firmware with no issues.
Click to expand...
Click to collapse
THX
Hi
Thanks for wonderful tutorial.
I have a korean phone with PG5812000, Its Hboot is1.17.1111.
Full details are as follow
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.1111
(bootloader) version-baseband: 10.14.9035.09_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.46.911.4
(bootloader) serialno: 12B9WQ2B0027
(bootloader) imei: 356442040292074
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5812000
(bootloader) cidnum: SKT__901
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Can I flash this rom over this Korean phone?
One more question, As per my previous experience we have to install boot.img file (extracted from viper rom) before installation. Is there no need to do same thing.?
thanks
br
nsnobel2 said:
Hi
Thanks for wonderful tutorial.
I have a korean phone with PG5812000, Its Hboot is1.17.1111.
Full details are as follow
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.1111
(bootloader) version-baseband: 10.14.9035.09_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.46.911.4
(bootloader) serialno: 12B9WQ2B0027
(bootloader) imei: 356442040292074
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5812000
(bootloader) cidnum: SKT__901
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Can I flash this rom over this Korean phone?
One more question, As per my previous experience we have to install boot.img file (extracted from viper rom) before installation. Is there no need to do same thing.?
thanks
br
Click to expand...
Click to collapse
i cant say it will work [ask dev of that rom thread] they will explain u better
as per your 2nd Q u can find answers to it here http://forum.xda-developers.com/showthread.php?t=1631861
Cant flash Vipers
Hi everyone.
I am not a geek, not a pro, just ordinary smartphone user. got bored to use stock sense and official version of android so trying to learn about these.
I have been reading here almost 2 weeks now.
I have installed my sensation xe to Revolution and now i have CM10
I have tried several times to install/load Vipers but no succeed so far.
I get the Aroma interface and go all through the selections. But in the end process finishing very fast and it says you have successfully installed vipers, but nothing cahange when i reboot. I have still previous rom. I am using ClockworkMod Recovery v5.8.0.9
can someone tell me where do i do the mistake?
Thanks in advance
Here are my current configs
Android version : 4.1.2
Baseband version : 11.76A.3504.00P_11.24A.3504.31_M
Kernel version : 3.0.55-jelly [email protected]#3
CyanogenMod version : 10-20130109-bruce2728-pyramid
S-off
Hboot - 1.27.1111
Radio - 11.24A.3504.31_M
thanks
Thanks Man....
joss123 said:
Hi everyone.
I am not a geek, not a pro, just ordinary smartphone user. got bored to use stock sense and official version of android so trying to learn about these.
I have been reading here almost 2 weeks now.
I have installed my sensation xe to Revolution and now i have CM10
I have tried several times to install/load Vipers but no succeed so far.
I get the Aroma interface and go all through the selections. But in the end process finishing very fast and it says you have successfully installed vipers, but nothing cahange when i reboot. I have still previous rom. I am using ClockworkMod Recovery v5.8.0.9
can someone tell me where do i do the mistake?
Thanks in advance
Here are my current configs
Android version : 4.1.2
Baseband version : 11.76A.3504.00P_11.24A.3504.31_M
Kernel version : 3.0.55-jelly [email protected]#3
CyanogenMod version : 10-20130109-bruce2728-pyramid
S-off
Hboot - 1.27.1111
Radio - 11.24A.3504.31_M
Click to expand...
Click to collapse
do a full wipe from recovery and format all partition except sd card [after this previous rom will be removed ] and also select full wipe from venom aroma see if it works
and if it does not [very rear ] flash 4ext recovery recommended by team venom
gauravmajithia said:
Thanks Man....
Click to expand...
Click to collapse
hit the THANKS button if u like it ....
Harbir said:
do a full wipe from recovery and format all partition except sd card [after this previous rom will be removed ] and also select full wipe from venom aroma see if it works
and if it does not [very rear ] flash 4ext recovery recommended by team venom
Hi,
Thank you for your reply but i did already what you ve written.
Nothing changed.
4ext recovery i have not tried. Just for this Rom i do not want to buy it.
Click to expand...
Click to collapse
joss123 said:
Harbir said:
do a full wipe from recovery and format all partition except sd card [after this previous rom will be removed ] and also select full wipe from venom aroma see if it works
and if it does not [very rear ] flash 4ext recovery recommended by team venom
Hi,
Thank you for your reply but i did already what you ve written.
Nothing changed.
4ext recovery i have not tried. Just for this Rom i do not want to buy it.
Click to expand...
Click to collapse
its free
http://4ext.net/
and are u sure it is old rom after that ? its not possible do u see success after aroma and saw aroma install all system files during it s install?
Click to expand...
Click to collapse
Ok, I'll start from the beginning.
I purchased my phone from Rogers at April 2012. So it was Rogers stock 4.0.x rom, everything was locked at that time. I FORGOT the stock hboot/ruu version number for Rogers ONE XL.
From the time being, I rooted it, superCID, unlocked via HTC DEV. After these, I flashed customer recovery, and successfully flashed several roms from time being. Finally I stayed with ViperXL.
Then, facepalm s-off is released, and I s-offed my phone. Everything worked just fine.
The problem occurred when I started to flash sense 5 roms about couple weeks ago. I did not upgrade my firmware and I flashed sense 5 based roms (this is my bad), so I'm experiencing random reboot and signal drops. Then I upgraded my firmware using the instruction in this tread: http://forum.xda-developers.com/showthread.php?t=2423735 . I verified my installtion with ./fastboot gervar all . At this time, there were two warnings on the top of my bootloader: "tampered" and "unlocked".
So, at this time, I tried several sense 5 roms. My recovery at this time was TWRP 2.6.3.0. All the roms have one common problem on my phone: after I locked the screen and left my phone for a while, if I wanna wake my phone/display, nothing happened by pressing the power button. I have to press the power button for 10+ seconds to restart my phone. If I just left my phone for a short time and wake it, it will work properly.
I was thinking are these sense 5 problems, so I tried to flash cm roms yesterday. I followed the instructions in http://forum.xda-developers.com/showthread.php?t=2382933 to upgrade my RUU to 3.18. I flashed TWRP 2.6.3.0, and tried to flash cm 10.1 and 10.2. For cm 10.2, there were a lot of force close when I boot my phone. For cm 10.1, it is so unstable with random reboots as well as did not respond when I try to wake up the phone. I am not questioning CM's roms, I am sure there were something wrong with my phone or what I've done to it.
So, I tried to flash viper rom again with ruu 3.18 installed. The rom won't even boot...... However I found something interesting when I am flashing the viper rom. The size of ViperXL is 700+ MB while the size of CM 10.1 or 10.2 is around 180MB. The time it took to flash ViperXL was shorter than the time it took to flash CM roms.
Then I re-installed the RUU 3.18 update on my phone. Right now, the AT&T stock rom also will not respond after I left my phone idle for a moment......
User timmaaa kindly reminds me about something. I am posting the original post I started in another tread.
Originally Posted by snake3276120 View Post
After I ran the RUU 3.18 upgrade in this tread: http://forum.xda-developers.com/show....php?t=2382933
I boot into bootloader, and ran fastboot getvar all, the result is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.14.0000
(bootloader) version-baseband: 0.24p.32.09.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.18.502.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT246W304864
(bootloader) imei: 359691041684351
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4122mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-97c9a06e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.061s
I'm assuming "(bootloader) version-main: 3.18.502.6" is the RUU version. I also flashed an hboot 2.14, it became 3.17.xxxxxxx. That'w why I am assuming this is the RUU number.
Ok, regardless of the build number or ruu...... I think there is something wrong with my bootloader. It doesn't matter which hboot I flash (hboot 2.14 with version-main 3.17/3.18, or hboot 2.15 with version-main 5.08), and I tried several twrp (2.4.4.0 and 2.6.3.0). The time it took to flash viper xl is really short while viper xl has 700MB. It is even shorter than the time I flash CM, which is around 180 MB. (Sorry for the bad English, I actually mean "The size of ViperXL is 700+ MB while the size of CM 10.1 or 10.2 is around 180MB. The time it took to flash ViperXL was shorter than the time it took to flash CM roms.")
I guess I'll start with the current AT&T stock rom (which still lose respond after I left the phone open for a while, and I have to press the power button for 10 secs to reset my phone)on hboot 2.14 and ruu 3.18. Root it, try to s-off again. Not sure if this will solve the problem.
Something interesting when I'm booting my phone, when the phone displays only the green HTC in the middle of the display, there is some text below it... saying something like "This is an internal build, do not distribute outside of HTC, failure may cause to law action". However, the AT&T stock rom I'm running right now does not have this.
timmaaa:
It's a bit hard to follow what you're saying there but here goes. It's not the RUU number it's the build number. An RUU is the program that updates your phone, the reason you see them referred to as the 3.18 RUU is because they're known by the build number that they update your phone to.
Did you check the md5 of the downloaded file as someone else suggested? It might be corrupt. Also, maybe you should try TWRP 2.6, versions 2.4.x and 2.5.x are well known as being very buggy, and I've seen people have issues with version 2.6.3 too. 2.6 is rock solid though.
The red text you see when the phone boots up is completely normal for a modified phone so you needn't worry about that. The reason the stock ROM doesn't have it is because the RUU has returned your phone to being completely stock, therefore not modified, therefore no red text.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
OK, I am wondering where I can get my RUU number......
Also, in this case, what I should do now? Install TWRP 2.6.0.0 and try to flash everything again?
Currently "tampered" is gone from my bootloader, only "unlocked" stays there.
Lol you've kinda mashed my quote in with your post there so it's hard for people to see where they begin and end.
What do you mean you want to get your RUU number? Like I said an RUU is a program, what exactly do you mean?
Sent from my Evita
timmaaa said:
Lol you've kinda mashed my quote in with your post there so it's hard for people to see where they begin and end.
What do you mean you want to get your RUU number? Like I said an RUU is a program, what exactly do you mean?
Sent from my Evita
Click to expand...
Click to collapse
Because some posts are saying RUU 3.17 or 3.18, so I got confused...... but as long as it's a program, I will assume they are talking about the firmware or bootloader after running RUU 3.17 or 3.18 upgrade.
timmaaa said:
Lol you've kinda mashed my quote in with your post there so it's hard for people to see where they begin and end.
What do you mean you want to get your RUU number? Like I said an RUU is a program, what exactly do you mean?
Sent from my Evita
Click to expand...
Click to collapse
I fixed the qoute
Just to be clear, after you ran the 3.18 RUU you booted the phone without making any modifications and the problem was still occurring, right? It seems to me that it might be some kind of hardware problem that's causing a sleep of death every time the phone goes into sleep mode.
Sent from my Evita
timmaaa said:
Just to be clear, after you ran the 3.18 RUU you booted the phone without making any modifications and the problem was still occurring, right? It seems to me that it might be some kind of hardware problem that's causing a sleep of death every time the phone goes into sleep mode.
Sent from my Evita
Click to expand...
Click to collapse
That's right, I didn't even flash recovery... Well, my stock rom just self-rebooted, and stuck at booting animation while adb is still able to recognize it, and I can issue a reboot from adb. This also applies to my sense 5 roms.
If it's hardware problem, looks like upgrading to hboot 2.15 ruined my hardware, which is hard to believe...... Everything works fine before I upgrade my hboot to 2.15
Unfortunately it isn't under warranty anymore either.
Sent from my Evita
timmaaa said:
Unfortunately it isn't under warranty anymore either.
Sent from my Evita
Click to expand...
Click to collapse
I know... it is unfortunate...
timmaaa said:
Unfortunately it isn't under warranty anymore either.
Sent from my Evita
Click to expand...
Click to collapse
I upgraded my hboot to 2.15 and I flashed MaginRom 4.0. At least it's booting...... looks like my recovery hates aroma installer.
snake3276120 said:
I upgraded my hboot to 2.15 and I flashed MaginRom 4.0. At least it's booting...... looks like my recovery hates aroma installer.
Click to expand...
Click to collapse
Confirm your hboot and baseband version and post here. You said it upgraded, but let's make sure it actually was completely successful.
Also, I think TWRP 2.6.3 has some bugs, not sure if AROMA is one of them. You might check the TWRP thread. But I believe other 2.6.x versions are very stable. I've been on 2.6.0 for a while, and everything seems to be working great, and don't remember any bug reports on that version.
Yeah I can confirm I've seen folks with bugs on 2.6.3 but I've been using 2.6 for months and not a single problem (and no reports of bugs from others).
Sent from my Evita
timmaaa said:
Yeah I can confirm I've seen folks with bugs on 2.6.3 but I've been using 2.6 for months and not a single problem (and no reports of bugs from others).
Sent from my Evita
Click to expand...
Click to collapse
I used 2.6.0.0 to flash my current magiorom 4..... well at least it is usable now, with app/sense/notification bar/wake phone do not respond sometimes... I'm not blaming the rom, I am blaming my phone... probably now it's the time to get a new one lol
redpoint73 said:
Confirm your hboot and baseband version and post here. You said it upgraded, but let's make sure it actually was completely successful.
Also, I think TWRP 2.6.3 has some bugs, not sure if AROMA is one of them. You might check the TWRP thread. But I believe other 2.6.x versions are very stable. I've been on 2.6.0 for a while, and everything seems to be working great, and don't remember any bug reports on that version.
Click to expand...
Click to collapse
Here you are, boss.
PS E:\Program Files (x86)> cd '.\Minimal ADB and Fastboot'
PS E:\Program Files (x86)\Minimal ADB and Fastboot> .\fastboot.exe getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.31a.32.45.16_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.08.111.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3874mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-de589c6eef
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.061s
PS E:\Program Files (x86)\Minimal ADB and Fastboot>
Click to expand...
Click to collapse
I think the result is the same in thread http://forum.xda-developers.com/showthread.php?t=2423735
Quoted from the thread:
Install:
Installing the rom:
Download the rom and copy to your sdcard
Reboot to Recovery
Flash rom
I recommend you wipe data before or after flashing the rom
For root access, flash this: Flash this in recovery for root access
Reboot
OPTIONAL: Installing the Firmware (Warning: You MUST be S-OFF and Super CID to flash this! Flash at own risk!)
Reboot to bootloader (adb reboot bootloader if "USB Debugging" is enabled in Android)
Run: fastboot oem rebootRUU
Run: fastboot flash zip <PathToFirmware.zip>
If the output ends with "FAILED (remote: 90 hboot pre-update! please flush image again immediately)", run the previous command AGAIN
If it ends with "INFO..... OK", reboot to the bootloader: fastboot reboot-bootloader
Verify everything was successful by running: fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.31a.32.45.16_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.08.111.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4140mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-de589c6eef
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Reboot into Android: fastboot reboot or into recovery: fastboot reboot-recovery
Click to expand...
Click to collapse
Please refer to the attachment for a photo of my bootloader
Will TWRP 2.3.3.0 solve my problem? It looks like most roms recommend this recovery.... btw I'm running 2.6.0.0 at the moment.
No, changing TWRP won't solve your problem. You said you're using TWRP 2.6 now and that version is fine. I'd suggest trying one more time to do a clean flash, so wipe cache/dalvik cache/factory reset/system and install the ROM. Hell, do the wipe two or three times to be sure before installing.
Sent from my Evita
timmaaa said:
No, changing TWRP won't solve your problem. You said you're using TWRP 2.6 now and that version is fine. I'd suggest trying one more time to do a clean flash, so wipe cache/dalvik cache/factory reset/system and install the ROM. Hell, do the wipe two or three times to be sure before installing.
Sent from my Evita
Click to expand...
Click to collapse
lol thanks... Every time before I flash a new rom, I just format everything...
I don't know what to tell you then. There's nothing wrong with the ROMs you're using so it's either a case of user error or hardware failure of some kind.
Sent from my Evita
timmaaa said:
I don't know what to tell you then. There's nothing wrong with the ROMs you're using so it's either a case of user error or hardware failure of some kind.
Sent from my Evita
Click to expand...
Click to collapse
Thanks for all the help... I think it is hardware error... because I'm an electrical/computer engineer, I don't think I can't even handle flashing roms... Maybe I need to do more research lol
One XL is a nice phone, I don't wanna switch yet...
snake3276120 said:
Thanks for all the help... I think it is hardware error... because I'm an electrical/computer engineer, I don't think I can't even handle flashing roms... Maybe I need to do more research lol
One XL is a nice phone, I don't wanna switch yet...
Click to expand...
Click to collapse
Could you also try one last thing? Could you upgrade your twrp to latest release and try flashing cm 10.2 0310 nightly please.
Sent from my One X using Tapatalk 4
sandys1 said:
Could you also try one last thing? Could you upgrade your twrp to latest release and try flashing cm 10.2 0310 nightly please.
Sent from my One X using Tapatalk 4
Click to expand...
Click to collapse
Ok I'll do a backup and try tonight....latest twrp do u mean 2.6.3.0, or there is another new release?
Heyy, so i was wondering if yous could help me. I have a stock HTC Sensation EU, t-mobile version, which I had updated to the latest version (4.0.3 I think). During the upgrade-process something went wrong and now it doesn't go past the HTC logo. S-ON. When in Hboot it shows no found something.img. What is the way to fix this?
If possible I'd like to root it as well and use the Cyanogenmod.
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
Seems good, i´ll try it out
blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
So it worked, but it didn't. I managed to install a custom rom, but after 10 seconds (if it even was that much), the system crashes and reboots, only to do the same thing again.
I used a RUU as well but I got a signing error (132) when using the RUU. I then tried installing the RUU through fastboot and I got further. I did however got the error saying the CID wasn't matching. In the .txt file from the zip I had added my CID, So I thought it had to work.
There is no official rom for my cid (T-MOB003) unfortunately.
This is starting to give me a headache
Search for this HERE
blogodoblogodo said:
Search for this HERE
Click to expand...
Click to collapse
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425
Hoooooooo, Nooo,
Sorry ,really sorry
I googled "T-MOB003 for SENSATION"
Sorry DrNickjen
Thank You Nicx59
Nicx59 said:
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
I have read that once, but I'll do it again; this time more thorougly.
The RUU I'm trying to install is RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed
fastboot getvar all returns
Code:
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.114.2
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: T-MOB003
(bootloader) battery-status: good
(bootloader) battery-voltage: 4104mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Since my cidnum is not in the RUU, (and there isn't a RUU for my cid) I'll have to add it according to the guide. I'll get to that later. hboot version to install and version-main are both higher than currently installed, so that shouldn't be an issue.
My phone is S-ON, but unlocked so I'll have to relock it again. Followed instructions and device is *** RELOCKED ***. Displays, however, a security warning. I'll now proceed with the installation by executing the exe. If I'm right I should see an error.
Error: Customer ID incorrect, as expected. I'll now try to install manually.
Since my CID is different I'll change it in the .zip. 7z didn't allow me to change it in the archive itself so I've extracted the archive, changed android-info.txt to:
Code:
modelid: PG5813000
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__N34
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__016
cidnum: T-MOB003
mainver: 3.32.401.5
hbootpreupdate:12
DelCache:1
Note: When pasting this my CID was placed on the same line as mainver. Inserted an enter and repasted in android-info.txt.
What I did as well was unlock the bootloader again, changed recovery to the file inside the rom.zip, and relocked the bootloader. I read this was a fix for the problem.
THIS POST IS IN PROGRESS
HI its not necessary to show ure imei, plz, edit your post and Erase it.
blogodoblogodo said:
HI its not necessary to show ure imei, plz, edit your post and Erase it.
Click to expand...
Click to collapse
Thanks.
Just Hit ThAnks Button
So For you, is it good???
blogodoblogodo said:
Just Hit ThAnks Button
So For you, is it good???
Click to expand...
Click to collapse
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...
DrNickjen said:
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...
Click to expand...
Click to collapse
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery
rzr86 said:
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery
Click to expand...
Click to collapse
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.
DrNickjen said:
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.
Click to expand...
Click to collapse
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?
rzr86 said:
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?
Click to expand...
Click to collapse
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.
DrNickjen said:
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.
Click to expand...
Click to collapse
change the recovery to 4ext
before flash the rom enable smartflash from 4ext
rzr86 said:
change the recovery to 4ext
before flash the rom enable smartflash from 4ext
Click to expand...
Click to collapse
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
First make a full backup of your device through 4ext.
Then just flash the zips from one of the following releases:
android1234567's release (here you have to flash rom and kernel seperately)
albinoman887's releease
And last flash gapps from here
DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
see my previous post of what to do now
S-OFF
flash 3.33 universal(check md5 sums before flashing)
flash cyanogenmod rom
done
note:when you achieve S-OFF you won't need anymore the smartflash feature
Hello guys,
I have tried many custom roms and wifi just worked on few of them like "ICE DS v 8.0 FINAL", "Balele v2.1 | ICS 4.0.4 | CM9" and etc . My phone is S-On and HTCDev unlocked . I want to use roms like "PACMan" and "Fallout" if I could
I have read "How to fix wifi error" and I should say :
I'm sure about flashing appropriate boot.img after installing.
I use "4EXT_Recovery_v2.2.7_RC5" and there is no "SmartFlash" in its options.
Apps like "WiFix" didn't work.
So Radio, Kernel and HBOOT remain.
Could you help me ?
Are you flashing the boot.img from the rom in fastboot?
ktks.m said:
Hello guys,
I have tried many custom roms and wifi just worked on few of them like "ICE DS v 8.0 FINAL", "Balele v2.1 | ICS 4.0.4 | CM9" and etc . My phone is S-On and HTCDev unlocked . I want to use roms like "PACMan" and "Fallout" if I could
I have read "How to fix wifi error" and I should say :
I'm sure about flashing appropriate boot.img after installing.
I use "4EXT_Recovery_v2.2.7_RC5" and there is no "SmartFlash" in its options.
Apps like "WiFix" didn't work.
So Radio, Kernel and HBOOT remain.
Could you help me ?
Click to expand...
Click to collapse
Are you s-on or s-off? What is your mid ( fastboot get var all ) ? Does WiFi work on your stock ROM? If so what ROM version is it, if its a ruu can you link to it please.
Sent from my HTC Desire S using Tapatalk
teadrinker said:
Are you flashing the boot.img from the rom in fastboot?
Click to expand...
Click to collapse
yes
heavy_metal_man said:
Are you s-on or s-off?
Click to expand...
Click to collapse
As I mentioned , my phone is S-ON.
heavy_metal_man said:
What is your mid ( fastboot get var all ) ?
Click to expand...
Click to collapse
I didn't get your point (mid ?) If you meant the version of ADT , I use "adt-bundle-windows-x86_64-20140321".
heavy_metal_man said:
Does WiFi work on your stock ROM? If so what ROM version is it, if its a ruu can you link to it please.
Click to expand...
Click to collapse
Yes, WIFI works on stock ROM, This is the stock rom and It is a RUU :
http://dl4.htc.com/RomCode/Source_and_Binaries/RUU_SAGA_ICS_35_S_HTC_EU_14.01.401.2_20.76.30.0835_3831.19.00.110_275068.zip
WIFI Also works on custom ROMs that are based on this RUU . Like this ROM :
http://forum.xda-developers.com/showthread.php?t=1567715
Also it works on CM9 custom ROMs like this :
http://forum.xda-developers.com/showthread.php?t=2037680
Did you flash a different kernel after rom installation? If so, you have to flash the boot.img from the kernel you installed
teadrinker said:
Did you flash a different kernel after rom installation? If so, you have to flash the boot.img from the kernel you installed
Click to expand...
Click to collapse
As I mentioned , I'm sure about flashing appropriate boot.img after installation. It's not the reason.
ktks.m said:
As I mentioned , my phone is S-ON.
I didn't get your point (mid ?) If you meant the version of ADT , I use "adt-bundle-windows-x86_64-20140321".
Click to expand...
Click to collapse
Your mid is a device identifier that denotes region specific devices. Some phones are released under the same name but have slight hardware differences based on their intended market. Its possible that your device has a different WiFi card, and needs a different driver. If you perform the Fastboot command I stated above it will give you a lot of info including your mid.
Have you tried to gain s-off up until now? It would rule out any issues with Fastboot flashing the boot.img of roms.
Sent from my HTC Desire S using Tapatalk
heavy_metal_man said:
Your mid is a device identifier that denotes region specific devices. Some phones are released under the same name but have slight hardware differences based on their intended market. Its possible that your device has a different WiFi card, and needs a different driver. If you perform the Fastboot command I stated above it will give you a lot of info including your mid.
Have you tried to gain s-off up until now? It would rule out any issues with Fastboot flashing the boot.img of roms.
Sent from my HTC Desire S using Tapatalk
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 2.02.0002
version-baseband: 3831.19.00.110
version-cpld: None
version-microp: None
version-main: 14.01.401.2
serialno: xxxxxxx
imei: xxxxxxx
product: saga
platform: HBOOT-7230
modelid: PG8810000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3914mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-90dc471e
hbootpreupdate: 12
gencheckpt: 0
Also I prefer keeping S-ON If it's possible.
ktks.m said:
version: 0.5
version-bootloader: 2.02.0002
version-baseband: 3831.19.00.110
version-cpld: None
version-microp: None
version-main: 14.01.401.2
serialno: xxxxxxx
imei: xxxxxxx
product: saga
platform: HBOOT-7230
modelid: PG8810000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3914mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-90dc471e
hbootpreupdate: 12
gencheckpt: 0
Also I prefer keeping S-ON If it's possible.
Click to expand...
Click to collapse
Hmmmm. If you install a rom your having an issue with, does the wifi start up or get stuck on turning on?
Sent from my Nexus 7 using Tapatalk
heavy_metal_man said:
Hmmmm. If you install a rom your having an issue with, does the wifi start up or get stuck on turning on?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
It get stuck.
I installed another ROM and WIFI works .
cm-10-20121116-EXPERIMENTAL-saga-NK111
Android Version = 4.1.2 .
I haven't found the reason of my problem yet . I guess the problem would be related to the kernel versions.
I realized ROMs in CM7, CM9, CM10 and "ICE DS v 8.0 FINAL" don't have problem,
Also ROMs in CM10.1 CM10.2, CM11, Ported ROMs and other ROMs based on ICS official like Fallout have problem.
Thank you all
hmm, this could be why my Wifi also gets stuck at connecting.
it can see the wifi signal, but as soon as i click connect, signal falls and nothing happens.
was working (mostly) on stock rom 2.3.5 Sense 3, did not work on CM11 r2 (devil-kin), or on Mokee open source [both 4.4]
still does not work on 4.2 based aokp redefined v3.
it seems i might have to try one of the roms u mentioned here or go back to stock.
@ktks.m, @teadrinker, @heavy_metal_man
is it possible to flash a working kernel on the current rom i am using ?
i am s-on too, and would need to downgrade my hboot if i want to s-off.
thanks
I couldnt get my wifi working,
but this reverse tethering windows tool helped me.
forum.xda-developers.com/showthread.php?t=1371345
those who can live with updating while connected to USB, can try this.
I am now using PAC v23 rom and surprisingly, my Wifi started working in this rom !!
Q&A for [ROM][JB][Sense 5][23.05] SaM ROM | Sense 7 Blinkfeed
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][JB][Sense 5][23.05] SaM ROM | Sense 7 Blinkfeed. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Best Sense Rom!
In my opinion I think this is the best Sense based rom for our c2!
It has the best battery life!
A big thank from me @Mikhei777 !!
bugs of this rom
1-if you can improve battery life
2-gapp not working( crashed)
man my phone has wifi problwem and i try it so hard to fix it but i can't pls help me
enesgaliba said:
man my phone has wifi problwem and i try it so hard to fix it but i can't pls help me
Click to expand...
Click to collapse
Maybe you won´t flash boot.img from fastboot? thats the main cause of wifi not working
Great rom!
But the reason why venom rom was good was its customizability.
Please introduce changing cpu governors, clock speed etc
Don't get me wrong...this is a superb rom!
Hello everybody !! Because I want to install this custom rom, but I'm new and I want to ask if anyone has the opportunity to make video how to install I would be very grateful.
Maxkiller89 said:
Hello everybody !! Because I want to install this custom rom, but I'm new and I want to ask if anyone has the opportunity to make video how to install I would be very grateful.
Click to expand...
Click to collapse
i thinking do it.. but im busy.. maybe at the weekend.. but its very easy .
unlock your bootloader via HTCDev
flash the mikhei777 recovery (are in SaM ROM thread).. download... reboot your phone in bootloader and flash the recovery...
copy the rom.zip in sdcard and reboot in recovery..
install the zip...
reboot in bootloader and flash de bootVILLEC2.img
reboot your phone and its ready .
if you don't understand what is fastboot and how to flash the files... maybe you need wait for a detail tutorial...
JavierG123 said:
i thinking do it.. but im busy.. maybe at the weekend.. but its very easy .
unlock your bootloader via HTCDev
flash the mikhei777 recovery (are in SaM ROM thread).. download... reboot your phone in bootloader and flash the recovery...
copy the rom.zip in sdcard and reboot in recovery..
install the zip...
reboot in bootloader and flash de bootVILLEC2.img
reboot your phone and its ready .
if you don't understand what is fastboot and how to flash the files... maybe you need wait for a detail tutorial...
Click to expand...
Click to collapse
Yes, but I think to wait for a detail tutorial from you. Тhank you again.
Maxkiller89 said:
Yes, but I think to wait for a detail tutorial from you. Тhank you again.
Click to expand...
Click to collapse
men... im sorry... im very busy... you can try follow this guide http://forum.xda-developers.com/showthread.php?t=2175411
wI fI
i can't active to wifi.
says error.
any idea?
rmva01 said:
i can't active to wifi.
says error.
any idea?
Click to expand...
Click to collapse
do you flash boot.img from fastboot after install the rom?
Who can put this ROM to s4 . very nice rum. Thank you . If that can be very good.
Browser not working
I just downloaded and installed Sam ROM.
Everything working fine but I am not able to use browser. Stock browser and chrome both not working. they are crashing with the error message on opening.
Sorry for my bad english
Truth is the first rom I taste and is very good and fluid, thank you very much , the only small mistakes I've seen are:
1. Application My themes HTC closes when wanting to see the introduction slide
2. It works fine when I put a USB with OTG adapter, but I don't know why not detect my TV tuner ( PADTV ) .
3. When I want to charge my phone, being off, I don't know what goes on, the phone turn on and enters the recovery
ceylas said:
Who can put this ROM to s4 . very nice rum. Thank you . If that can be very good.
Click to expand...
Click to collapse
The rom works fine on the S4 in 2.15 the patch is in the post of rom
http://forum.xda-developers.com/htc-one-s/development/rom-rom-classic-sense-7-blinkfeed-t3234570
I can set these attributes with my terminal HTC ONE S
Hello I wonder if this rom is compatible with my terminal and if not so, what do you recommend installing, here fighting in my first flash
C:\Android>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.09.4444
(bootloader) version-baseband: 1.15.50.05.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: F**********9
(bootloader) imei: 3*************9
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4127mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) 3.17.599.3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s
Sometimes when I turn on the phone recently , I play a song and then entered the google page (using Chrome) THROUGH the Bookmarks widget , my phone crashes and restarts.
hello guys I ask help to you, I was on liberty sense before now are passed to this beautiful rom, but I have problem calling with Skype and whatsapp, how can I fix?
I used this rom 1 year period but recently when I update this rom don't work gallery don't work google chrome and random restart when i used any app. please fix this rom it is perfectly for this device. ??
Enviado desde mi HTC One S mediante Tapatalk