Related
I just bought this tablet and it seems to have updated itself overnight (that or my kid did it) I want to root it , but it says it's running 5.0.1 now.. if it's possible, could someone walk me through this? I've been reading thru the various root threads, and having no luck-I'm on Ubuntu latest and have adb and fastboot installed..anyone feel like helping me out?
unlock bootloader, flash TWRP, then flash SuperSU
Bogdacutu said:
unlock bootloader, flash TWRP, then flash SuperSU
Click to expand...
Click to collapse
I did the above but with a slight change. I just booted CWM instead of flashing it so till running stock recovery but rooted.
I did this from 5.0.1 after unlocking the bootloader which was a piece of cake. There is a great guide on this forum.
Hello there,
have been trying to root my new xperia z3 for 3 weekends now with no luck.
My bootloader has been unlocked through sony website, then relocked and unlocked many times using flashtool.
Looks like all the recoveries (doomlord, twrp) I could find work only on 4.4.4. Then I use flashtool to flash lollipop 5.1.1 23.4.A.1.200 and either wipe and loose the root or don't wipe all and enter a bootloop.
Flashing those recovery kernels straight on lollipop make the phone enter bootloop.
Are you guys able to root those Z3 under 5.1.1 ?
thank you
Sure shot easy way is flash kitkat firmware and use giefroot or flash 5.0 firmware and use kingroot.
Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.
Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?
Thanks a lot for your answer guys.
Am unusually struggling with this device.
lol1rfs said:
Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.
Click to expand...
Click to collapse
Have already downgraded to kitkat, installed custom recovery and rooted. But the 5.1.1 stock flash indeed wipe everything.
Haven't found yet a custom recovery for 5.1.1 that doesn't make the phone enter a bootloop. Would you happen to have a link ?
I'll give a look to that PRFcreator, didn't know about it.
Jkay7 said:
Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?
Click to expand...
Click to collapse
This is what I read about kingroot and haven't found any other way to root a 5.1.1 stock.
Where could I find a pre-rooter ROM then ? My wish was to be stock and rooted to be able to use apps like titanium backup and adblockers. Used to try custom roms every other day on my old SGS but today I'd be happy with something that just works.
Did not make any backup before unlocking but looked like flashtool was able to relock the device. Am I right guessing I didn't loose my DRM keys then ?
Thanks again for your answers.
Edit: looks like am missing sthg, what's the point in rooting a kitkat to upgrade with a pre-rooted lollipop right after ?
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
I hope you made a TA backup before unlocking your bootloader, otherwise you have lost your DRM keys forever.
Anyway, if your bootloader is now locked, follow the guide that Licaon_Kter linked in the above post.
The exploit that lets us root our Z3 only works on Kitkat, so downgrade first, run the exploit to obtain root, and install recovery.
You will then have stock, rooted, KitKat.
To get to 5.1.1, you will then need to either create your own pre rooted firmware, or download one that someone has kindly posted on here.
If you want to learn how to do it, read this --> Create your own pre rooted firmware with PRF Creator
PRF Creator will create a zip file that can be flashed from recovery, so once you have recovery installed, it's dead easy.
That will get you where you want to be.
However . . . and there's always a however lol . . .
. . . if you still have an unlocked bootloader, it is much simpler from wherever you are.
Find any custom rom that has recovery built in, and almost all do, then fastboot the kernel only, the boot.img.
Reboot your device and enter recovery.
Install your pre rooted firmware that you have either created with PRF Creator, or downloaded from here.
Job done.
My personal advice is read, read, and then read some more.
It can be very complicated, but you'll get the hang of it.
Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I still have an unlocked bootloader since flashtool can lock and unlock it in a matter of a second.
Went back again in KK rooted with twrp recovery.
Wiped data, cache, dalvik.
Flashed D6603_23.4.A.1.232_Customized_US_SuperSU_XZDR2.8.2 1 from the link above and ... CWM recovery report install from sdcard completed after 1s and nothing more. Am still booting in KK after that.
This didn't work for me. Am losing it now with this phone.
Am I missing sthg ? Any advice ?
Can't use PRFCreator, am under mac os...
Thanks to all for your help
Try with TWRP too
Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
Licaon_Kter said:
Try with TWRP too
Click to expand...
Click to collapse
tried twrp found there http://forum.xda-developers.com/z3/development/recovery-z3-twrp-2-8-4-0-t3028846
phone is not booting anymore.
twrp post says it doesn't work on stock room.
---------- Post added at 02:16 PM ---------- Previous post was at 02:05 PM ----------
Is there really anyone out there with a rooted stock lollipop ?
or you are all using customs ?
am seriously questionning the thing now
Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Licaon_Kter said:
Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I just can't, I don't have access to a window machine
Both giefroot and FlashTool are for Win/Mac/Linux.
Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
I appreciate your still trying to help me.
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
I have read thoroughly and downloaded pre-rooted lollipop stock roms from the link you provided.
Once under KK, rooted, with all settings set properly (debug, security, etc...), and all caches/dalvik/data wiped, the CMW recovery just don't flash those lollipop roms. After just one sec, it says install completed but then the device still boot under KK.
TWRP doesn't even intall, so am wondering if this is even possible to get a TWRP on stock rom.
Have tried all of those with bootloader unlocked and locked, or a mix like unlocked first to be able to root a KK, then relock to flash a stock prerooted 5.1.1 (as stated in the post) but then I get a device that doesn't even boot.
Tried dualrecovery too, flash the zip, and nothing.
I suspect all of you guys have used some sort of .bat windows utility to get through this.
Once again, thanks for your help and patience.
ikho said:
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
Click to expand...
Click to collapse
The point is to go from the BEGINing _again_: Flash stock KK, giefroot, XZ, pre-rooted LP
I have done it in Linux w/ locked bootloader and stock ROM, hence my pointers.
XZDualrecovery has TWRP 2.8.7.0. But, do take note that you use Volume Down to enter PhilzTouch Recovery and Volume Up to enter TWRP.
Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
am sorry, can't find how to use giefroot on a mac.
read quite a few post of people saying that was not working for them.
Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )
Licaon_Kter said:
Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )
Click to expand...
Click to collapse
yaaay, houray it finally worked
big thanks man, you saved me $500 on that one !
6.0 Marshmallow with insecure modded kernel and TWRP recovery
This needs testing by someone else. It has been flashed on my own personal phone with no issues.
Requirements- Unlocked bootloader, Draken FX's Bootstack -the fixed version by Turbo2012 found in DrakenFX's thread for the flashable 6.0 update. Must be currently on an LG based ROM NOT CM. After install flash SuperSU install zip, post any issues. You will be able to ADB and Fastboot even if you can only boot splash screen with this kernel so you should be able to recover from almost anything multiple ways. When time allows I will put up a source built 6.0 along the lines of Game Theory's Katana ROM. Everybody is welcome to everything I post and I strongly encourage the young crowd to get involved, these phones don't support their selves.
Downloads:
Tested SuperSU
Working Bootstack for 6.0 MM
Update.zip
Instructions:
Flash Bootstack
Flash Update
Flash Beta SuperSU from link
New debloated version with insecure kernel and init.d support, rooted with Chainfire's Beta 2.71 SuperSU credit to SuperR for the help with the updater perms.
FIXED DOWNLOAD ALL APOLOGIES
Skinny Stylo Alpha version
Credits:
DrakenFX for his flashable zips and kdz files
Turbo2012 fixing and contributing
Chainfire for his SuperSU and he's been here since it started
Saved
Requirements- Unlocked bootloader
Click to expand...
Click to collapse
Does that mean a fastboot oem unlock, or the OEM unlock in the developers tools. If you mean fastboot oem unlock, is that available once you flash stock MM, since it is not in LP?
PS - thank you very much for taking the time to pick this up. Back in the days of the Galaxy S1, I had a build environment setup, and a lot more knowledge (it is amazing that if you don't use it, you lose it), but I have a son now, so I don't have the time to invest in all the hobbies that I want anymore. I will definitely be a guinea pig for you. I am not actually aware of a way to brick the Metro or TMO versions of this phone since we have a kdz -- it is not possible to blow up firmware download mode.
runningnak3d said:
Does that mean a fastboot oem unlock, or the OEM unlock in the developers tools. If you mean fastboot oem unlock, is that available once you flash stock MM, since it is not in LP?
PS - thank you very much for taking the time to pick this up. Back in the days of the Galaxy S1, I had a build environment setup, and a lot more knowledge (it is amazing that if you don't use it, you lose it), but I have a son now, so I don't have the time to invest in all the hobbies that I want anymore. I will definitely be a guinea pig for you. I am not actually aware of a way to brick the Metro or TMO versions of this phone since we have a kdz -- it is not possible to blow up firmware download mode.
Click to expand...
Click to collapse
@runningnak3d
I would prefer to be bootloader unlocked through fastboot oem unlock before doing any mods in 6.0. Every single time I did not I got secure boot error. If you make any system change on 6.0 with locked boot it will not boot.
Thank you for taking the time to do this.
:good::good:
So it's still not possible to update from Lollipop to rooted Marshmallow without unlocking the bootloader via fastboot? A secure boot error might as well be a brick to me. Oh well.
Revenant Ghost said:
So it's still not possible to update from Lollipop to rooted Marshmallow without unlocking the bootloader via fastboot? A secure boot error might as well be a brick to me. Oh well.
Click to expand...
Click to collapse
The main reason I made this was because I can never boot recovery or fastboot manually ( ex. w/hardware buttons) when you have the insecure kernel adb works when at the splash screen so it's easier to recover if you have any problems.
Sent from my LG-H631 using XDA-Developers mobile app
Revenant Ghost said:
So it's still not possible to update from Lollipop to rooted Marshmallow without unlocking the bootloader via fastboot? A secure boot error might as well be a brick to me. Oh well.
Click to expand...
Click to collapse
If you used Draken's guide to root and install TWRP on lollipop, your bootloader will be unlocked.
wrenchman76 said:
If you used Draken's guide to root and install TWRP on lollipop, your bootloader will be unlocked.
Click to expand...
Click to collapse
You only need a "soft" unlock (enable oem unlock in developer mode) to root / install TWRP on lolipop -- no PC required. MM however, requires a "hard" OEM unlock, and that requires a PC.
runningnak3d said:
You only need a "soft" unlock (enable oem unlock in developer mode) to root / install TWRP on lolipop -- no PC required. MM however, requires a "hard" OEM unlock, and that requires a PC.
Click to expand...
Click to collapse
I am currently on lollipop rooted and TWRP installed off of Draken's guide. Do I need to do something else to the bootloader before I flash this ROM?
wrenchman76 said:
I am currently on lollipop rooted and TWRP installed off of Draken's guide. Do I need to do something else to the bootloader before I flash this ROM?
Click to expand...
Click to collapse
Yes, you have to unlock your bootloader with fastboot oem unlock. If you flash this without unlocking your bootloader you will get a secure boot error, and you will have to flash a KDZ and start all over.
Lolipop doesn't come with fastboot. So you have to follow Draken's thread to get stock MM on your device. There is NO other way. Once you have stock MM you can unlock your boot loader with fastboot. Once you have an unlocked boot loader -- THEN you can flash this if you want.
Waiting on the debloated version.
Sent from my LGMS631 using Tapatalk
runningnak3d said:
Yes, you have to unlock your bootloader with fastboot oem unlock. If you flash this without unlocking your bootloader you will get a secure boot error, and you will have to flash a KDZ and start all over.
Lolipop doesn't come with fastboot. So you have to follow Draken's thread to get stock MM on your device. There is NO other way. Once you have stock MM you can unlock your boot loader with fastboot. Once you have an unlocked boot loader -- THEN you can flash this if you want.
Click to expand...
Click to collapse
I can vouch for this. That's exactly what happened to me when I tried to flash this without unlocking the bootloader with fastboot. At least I finally managed to ship my device to LG for repairs today. I'll just chalk it up as another lesson learned.
Revenant Ghost said:
I can vouch for this. That's exactly what happened to me when I tried to flash this without unlocking the bootloader with fastboot. At least I finally managed to ship my device to LG for repairs today. I'll just chalk it up as another lesson learned.
Click to expand...
Click to collapse
You didn't need to ship it back to LG. Firmware download mode is always available (hold vol up while plugging in USB cable -- just vol up, not vol up + power). Continue holding vol up until FW DL mode displays). Then just use the LG flash tool to flash a KDZ. It is a PITA when you have to go back that far, but you can't brick these phones, not with software at least -- they would need to be physically altered
-- Brian
Revenant Ghost said:
I can vouch for this. That's exactly what happened to me when I tried to flash this without unlocking the bootloader with fastboot. At least I finally managed to ship my device to LG for repairs today. I'll just chalk it up as another lesson learned.
Click to expand...
Click to collapse
You sent your device in for a soft brick? You should set up the flash tool for our phone with a 10j.kdz before doing anything. Hope you get it back soon.
Debloated version
Fixing some force close problems on a debloated version now, should be up later today or tonight.
@runningnak3d
Flashing the KDZ seems easy enough. But how could I fix it without unrestricted access to a computer? And my stock charger is broken without a USB cable. I had no choice but to send it in for repairs. Guess I'll be stuck on Lollipop for a while longer, at least.
Edubyah said:
6.0 Marshmallow with insecure modded kernel and TWRP recovery
This needs testing by someone else. It has been flashed on my own personal phone with no issues.
Requirements- Unlocked bootloader, Draken FX's Bootstack -the fixed version by Turbo2012 found in DrakenFX's thread for the flashable 6.0 update. Must be currently on an LG based ROM NOT CM. After install flash SuperSU install zip, post any issues. You will be able to ADB and Fastboot even if you can only boot splash screen with this kernel so you should be able to recover from almost anything multiple ways. When time allows I will put up a source built 6.0 along the lines of Game Theory's Katana ROM. Everybody is welcome to everything I post and I strongly encourage the young crowd to get involved, these phones don't support their selves.
Downloads:
Tested SuperSU
Working Bootstack for 6.0 MM
Update.zip
Instructions:
Flash Bootstack
Flash Update
Flash Beta SuperSU from link
Credits:
DrakenFX for his flashable zips and kdz files
Turbo2012 fixing and contributing
Chainfire for his SuperSU and he's been here since it started
Click to expand...
Click to collapse
Can you post links to DrakenFx post and will this work with CDMA version (ie, Boost Mobile 770 version of hardware)
JBoever said:
Can you post links to DrakenFx post and will this work with CDMA version (ie, Boost Mobile 770 version of hardware)
Click to expand...
Click to collapse
Can the bootloader be unlocked on the CDMA versions (ex. Boost, Sprint, Verizon)? If you can I will make a variant for it. But if you can't NO.
I just found out that the unlocked bootloader in 6.0 survives even the .kdz flashtool. So once you unlock your boot in 6.0 with fastboot oem unlock you never have to do it again even survived kdz downgrade to lollipop and update to 6.0 stayed unlocked.
JBoever said:
Can you post links to DrakenFx post and will this work with CDMA version (ie, Boost Mobile 770 version of hardware)
Click to expand...
Click to collapse
works great on metro ms631 just need wifi to stop turning its self off can you guys fix it! h631/ms631 mm kernel works find no errors help needed fixing wifi connection thanks
The easiest method to obtain root or unlocks or update or downgrade unlocked bootloaders can be found below they were updated December of 2021
EMMC 15 Unlocking Bootloader
2022_VZW_EMMC_15_ AIO_Tool To Unlock_Bootloader+Install_TWRP And MM_QL1_Rooted_Rom Works On Any Version Bootloaders_MM_LL_KK-Reactivation Lock Remover
This Process Will Root Phone Unlock Your VZW EMMC 15 Chipset Bootloader Install TWRP Recobery And Imstall Latest QL1 Stock Rom . Downloads S5_Root_Tools_2023.7z EMMC_15_Rom.zip -- Stock QL1 6.0 Directions For Unlocking Stock Phone I would...
forum.xda-developers.com
EMMC 15 Updating Unlocked Bootloaders Or Downgrading
2022_VZW_EMMC_15_Chipset For Unlocked Dev BL To Downgrade To LL_KK Or Upgrade To MM_And Keep Unlock Bootloader
This Process Will Update Or Downgrade Your VZW EMMC Chipset DEV Aboot Bootloader Unlocked S5 To Marshmallow 6.0 Lollipop 5.0 Or Kitkat 4.2 or 4.4 Root And Unlock Instructions Can Be Found Here EMMC 15 Rooting And Bootloader Unlocking EMMC 11...
forum.xda-developers.com
For Rooting EMMC 11 Phones
2021_VZW_Locked_Bootloader_EMMC_11_Rooted/NonRooted_Roms_With_Safestrap_MM_LL_KK
This Process Will Install On The EMMC_11 Locked Bootloader Verizon S5 Marshmallow QL1 Stock Rom NonRooted With Safestrap. Lollipop PB1 Stock Rom Rooted With Safestrap. KK Rom Rooted With Safestrap What This Does This gives you the ability to...
forum.xda-developers.com
Downgrade Files
Any Prerooted PB1 Rom
PB1_Firmware_With_PB1_Bootloader_CAUTION.zip
Place rom and PB1_Firmware_With_PB1_Bootloader_CAUTION.zip on phone
Wipe Data/System/Cache
Flash Rom
Flash PB1_Firmware_With_PB1_Bootloader_CAUTION.zip
your done. You dont need to worry about safestrap zip because you will be rooted again
Weird.....so we'll have a we can flash any Custom MM Rom......but it won't be Rooted. Progress!
Stupifier said:
Weird.....so we'll have a we can flash any Custom MM Rom......but it won't be Rooted. Progress!
Click to expand...
Click to collapse
Always need root just to install custom roms . If we can install roms without root , then we don't need root anymore ( I am still lost ). Now I can wait for custom 6.1 roms.
Its not ideal but at least you dont have to go through the whole reroot process each time you want to change roms. And you can still flash zips etc in safestrap.
Reserved
Can we run and use apps which require ROOT access?
I'm a bit confused though. Don't custom ROMs come pre-rooted???? So wouldn't flashing a custom ROM which is pre-rooted....... remain rooted?
Stupifier said:
Can we run and use apps which require ROOT access?
I'm a bit confused though. Don't custom ROMs come pre-rooted???? So wouldn't flashing a custom ROM which is pre-rooted....... remain rooted?
Click to expand...
Click to collapse
Probably no . It says by @jrkruse the flashed Roms got no root !
Stupifier said:
Can we run and use apps which require ROOT access?
I'm a bit confused though. Don't custom ROMs come pre-rooted???? So wouldn't flashing a custom ROM which is pre-rooted....... remain rooted?
Click to expand...
Click to collapse
alin919 said:
Probably no . It says by @jrkruse the flashed Roms got no root !
Click to expand...
Click to collapse
You cannot have a rooted MM rom with locked bootloader because to have root requires a custom kernel which locked bootloaders cannot flash. It doesnt matter if the rom is prerooted or not! Stock Boot.img means no root. You cannot run apps that require root with these roms All this method does if give you some options the biggest option being the ability to flash zips. and change roms with out having to odin back to stock pb1 then reroot then. Try the stock MM rom I posted. Once installed you can flash a debloatzip or a knox removal zip or delete apps from safestrap with the built in file manager If you dont like you can always downgrade back to PB1
jrkruse said:
You cannot have a rooted MM rom with locked bootloader because to have root requires a custom kernel which locked bootloaders cannot flash. It doesnt matter if the rom is prerooted or not! Stock Boot.img means no root. You cannot run apps that require root with these roms All this method does if give you some options the biggest option being the ability to flash zips. and change roms with out having to odin back to stock pb1 then reroot then. Try the stock MM rom I posted. Once installed you can flash a debloatzip or a knox removal zip or delete apps from safestrap with the built in file manager If you dont like you can always downgrade back to PB1
Click to expand...
Click to collapse
That what i thought , this is better than nothing for use with locked bootloaders . Thanks :good:
So has anyone tried it
jrkruse said:
So has anyone tried it
Click to expand...
Click to collapse
I am downloading now, I just got home.
jrkruse said:
So has anyone tried it
Click to expand...
Click to collapse
my wife's computer crashed so i have not i even went to local library and i was now allowed to download there so i have to wait until i get my wife's computer out of shop.
Sent via mobile Verizon S5
@jrkruse How does this work?
Based on my knowledge from reading this, it seems that the kernel finds the checksum of the system partition and then only boots if it is unmodified.
Shouldn't modifying the system partition in the slightest bit throw this checksum off?
Also - modified kernels CAN be flashed on locked bootloaders - just not via Odin. They only won't boot though >.>
jrkruse said:
So has anyone tried it
Click to expand...
Click to collapse
Perfect instructions @jrkruse , thank you ! Is working , it took me 11 minute to boot . Now lets see if everything is working wright .
alin919 said:
Perfect instructions @jrkruse , thank you ! Is working , it took me 11 minute to boot . Now lets see if everything is working wright .
Click to expand...
Click to collapse
So far everything is looking good , i will run today marshmallow to check it out . Tomorrow i will try to downgrade to pb1 to see if working .
Will this method work with FF? Haven't used SS since my SG4 days.
Sent from my SM-G900V using Tapatalk
I got one to try. I have tried it so I know it works
Download this rom
Download my Patch
In safestrap do a manual wipe. Wipe Data,WipeCache,Wipe System
Install Rom
Install patch
This rom Does not flash system.img so you dont need to install safestrap it will stay installed
After patch is installed wipe data and wipe cache and install MM Bootloader zip
Reboot it will take 15 to 20 min to boot
Now you will Have A Note 5 port with working theme support
Hollywood67 said:
Will this method work with FF? Haven't used SS since my SG4 days.
Click to expand...
Click to collapse
No
hey what can i do im on the MM firmware but i flashed something and now my phone just stays at the samsung logo with a blue led light what can i do it wont but up past the samsung logo screen
Do Not Flash This On Unlocked Bootloaders Or You Will Relock Your Bootloader!!!Once your on MM 6.0.1 you cannot restore a Lollipop Backup using SafeStrap or vice versa. Follow the link at bottom of post for guide and files to downgrade back to Lollipop
Ok the first thing I want to make clear is YOU WILL NOT HAVE ROOT! You will still have the use of Safestrap Recovery even though phone will not be rooted. What this will allow you to do is boot the non rooted rom back into safestrap. While in Safestrap you can do what you have always done, Flash Zips, Make Backups,Etc. This will also make it easy if you want to go back to PB1 rooted rom.
You must be on A rooted rom preferably A PB1 rom running SafeStrap
If Running FlashFire
Make sure latest busybox is installed
Install MM_Safestrap.apk
Reboot to safestrap
Wipe Data,Cache,System
Install VZW_QA1_STOCK_SAFESTRAP_ONLY_V2.zip
Roms will take a long time to boot up be patient!
This will put you on pure stock rom MM QA1 rom but from here you can get to safestrap to flash other roms or mods
To return to Safestrap you will need to flash a kitkat kernel NI2_stock_kernel.tar.md5 using odin then when phone reboots click on enter safestrap recovery. When leaving safestrap you must flashMM_KERNEL_SS-FF_Flashable.zip. Which will be located on your internal storage In a folder called MM_KERNEL_SS-FF_Flashable
If you want to flash other custom roms a guide can be found HERE
Useful zips
View attachment ADBlocking_2_5_17.zip
View attachment DebloatScript.zip
Thanks Jkruse!
Question... I tried your stock PB1 before and it worked well. I however hosed myself flashing the incorrect firmware and USB bulk mode occured when I attempted to go back to PHX11 5.0 ROM. I flashed firmware as when I reloaded the backup of PHX 11 I had no data or wifi.
I saved the phone however and need to know what is the correct procedure to go back to LP backups if I try this and decide not to stay? I want to avoid bulk mode again!
Thank you!!
ridenickel9 said:
Thanks Jkruse!
Question... I tried your stock PB1 before and it worked well. I however hosed myself flashing the incorrect firmware and USB bulk mode occured when I attempted to go back to PHX11 5.0 ROM. I flashed firmware as when I reloaded the backup of PHX 11 I had no data or wifi.
I saved the phone however and need to know what is the correct procedure to go back to LP backups if I try this and decide not to stay? I want to avoid bulk mode again!
Thank you!!
Click to expand...
Click to collapse
Once your on this rom The link at the bottom of the OP has a guide and files for going back to lollipop BP1 build without having to reroot. It's in the second post of that guide
jrkruse said:
Once your on this rom The link at the bottom of the OP has a guide and files for going back to lollipop BP1 build without having to reroot. It's in the second post of that guide
Click to expand...
Click to collapse
I'll read up! Thank you!!
Would this be the same procedure for OG5 just substitute the PB1 caution firmware with OG5 caution firmware? I assume just match the ROM you go to with the caution zips that don't contain the bootloader.
Pretty sure I didn't use the caution firmware before and that what caused my issues.
ridenickel9 said:
I'll read up! Thank you!!
Would this be the same procedure for OG5 just substitute the PB1 caution firmware with OG5 caution firmware? I assume just match the ROM you go to with the caution zips that don't contain the bootloader.
Pretty sure I didn't use the caution firmware before and that what caused my issues.
Click to expand...
Click to collapse
If you goback to lollipop it will need to be PB1
Added debloat script to post 2 that can be flashed with safestrap
jrkruse said:
If you goback to lollipop it will need to be PB1
Click to expand...
Click to collapse
OK thank you for clarifying. I use PHX 11 and always need to flash the OG5 kernal from safe strap so I assumed I'd need OG5 firmware for that particular situation.
Also thanks for updating the OP about using backups to and from MM - that will help others avoid issues.
I'll stop clogging the thread now! Appreciate all the information and work you do!!
Hey, thanks for this great site and all of your guides. It really helps.
I just rooted my s5 g900v and Im still on KITKAT NK2. Would it be possible for me to update from that version to this one following your guide?
Sorry for asking really basic questions. My phone at the moment is sim unlocked and rooted, but CID starts with 11 so I cannot unlock the boatloader, right? Then I assume this ROM is my best option. I want to be really sure that I will still be sim unlocked on the new ROM, its got nothing to do with it, right?
Many many thanks in advanced!
nachoalt said:
Hey, thanks for this great site and all of your guides. It really helps.
I just rooted my s5 g900v and Im still on KITKAT NK2. Would it be possible for me to update from that version to this one following your guide?
Sorry for asking really basic questions. My phone at the moment is sim unlocked and rooted, but CID starts with 11 so I cannot unlock the boatloader, right? Then I assume this ROM is my best option. I want to be really sure that I will still be sim unlocked on the new ROM, its got nothing to do with it, right?
Many many thanks in advanced!
Click to expand...
Click to collapse
Yes you can update to this rom and also verizon phones are all sim unlocked so it will rermain sim unlocked. Just remember if your still on kitkat when you flash anything with safestrap do not use rom slots flash on the stock rom slot. If you dont know what this means then dont worry about it
jrkruse said:
Added debloat script to post 2 that can be flashed with safestrap
Click to expand...
Click to collapse
Thanks for the hard work, unfortunately my cid 15 just took a nice fat swim and i had to get a replacement and got a cid 11 instead (##$$%@@@!#[email protected]). Your guides have been great to get to this point but got a couple questions:
Any link to what the debloat script removes? I just ran it and it doesn't seem to remove anything (ran it at same time as addblock). Going to reboot and flash it again see if it does. Any way we can remove the stuff we don't want? (all the VZW junk)