Database Info

Is there a way to root on 5.1.1 23.4.A.1.200 ?

Hello there,
have been trying to root my new xperia z3 for 3 weekends now with no luck.
My bootloader has been unlocked through sony website, then relocked and unlocked many times using flashtool.
Looks like all the recoveries (doomlord, twrp) I could find work only on 4.4.4. Then I use flashtool to flash lollipop 5.1.1 23.4.A.1.200 and either wipe and loose the root or don't wipe all and enter a bootloop.
Flashing those recovery kernels straight on lollipop make the phone enter bootloop.
Are you guys able to root those Z3 under 5.1.1 ?
thank you

Sure shot easy way is flash kitkat firmware and use giefroot or flash 5.0 firmware and use kingroot.

Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.

Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?

Thanks a lot for your answer guys.
Am unusually struggling with this device.
lol1rfs said:
Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.
Click to expand...
Click to collapse
Have already downgraded to kitkat, installed custom recovery and rooted. But the 5.1.1 stock flash indeed wipe everything.
Haven't found yet a custom recovery for 5.1.1 that doesn't make the phone enter a bootloop. Would you happen to have a link ?
I'll give a look to that PRFcreator, didn't know about it.
Jkay7 said:
Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?
Click to expand...
Click to collapse
This is what I read about kingroot and haven't found any other way to root a 5.1.1 stock.
Where could I find a pre-rooter ROM then ? My wish was to be stock and rooted to be able to use apps like titanium backup and adblockers. Used to try custom roms every other day on my old SGS but today I'd be happy with something that just works.
Did not make any backup before unlocking but looked like flashtool was able to relock the device. Am I right guessing I didn't loose my DRM keys then ?
Thanks again for your answers.
Edit: looks like am missing sthg, what's the point in rooting a kitkat to upgrade with a pre-rooted lollipop right after ?

After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056

I hope you made a TA backup before unlocking your bootloader, otherwise you have lost your DRM keys forever.
Anyway, if your bootloader is now locked, follow the guide that Licaon_Kter linked in the above post.
The exploit that lets us root our Z3 only works on Kitkat, so downgrade first, run the exploit to obtain root, and install recovery.
You will then have stock, rooted, KitKat.
To get to 5.1.1, you will then need to either create your own pre rooted firmware, or download one that someone has kindly posted on here.
If you want to learn how to do it, read this --> Create your own pre rooted firmware with PRF Creator
PRF Creator will create a zip file that can be flashed from recovery, so once you have recovery installed, it's dead easy.
That will get you where you want to be.
However . . . and there's always a however lol . . .
. . . if you still have an unlocked bootloader, it is much simpler from wherever you are.
Find any custom rom that has recovery built in, and almost all do, then fastboot the kernel only, the boot.img.
Reboot your device and enter recovery.
Install your pre rooted firmware that you have either created with PRF Creator, or downloaded from here.
Job done.
My personal advice is read, read, and then read some more.
It can be very complicated, but you'll get the hang of it.

Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I still have an unlocked bootloader since flashtool can lock and unlock it in a matter of a second.
Went back again in KK rooted with twrp recovery.
Wiped data, cache, dalvik.
Flashed D6603_23.4.A.1.232_Customized_US_SuperSU_XZDR2.8.2 1 from the link above and ... CWM recovery report install from sdcard completed after 1s and nothing more. Am still booting in KK after that.
This didn't work for me. Am losing it now with this phone.
Am I missing sthg ? Any advice ?
Can't use PRFCreator, am under mac os...
Thanks to all for your help

Try with TWRP too

Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
Licaon_Kter said:
Try with TWRP too
Click to expand...
Click to collapse
tried twrp found there http://forum.xda-developers.com/z3/development/recovery-z3-twrp-2-8-4-0-t3028846
phone is not booting anymore.
twrp post says it doesn't work on stock room.
---------- Post added at 02:16 PM ---------- Previous post was at 02:05 PM ----------
Is there really anyone out there with a rooted stock lollipop ?
or you are all using customs ?
am seriously questionning the thing now

Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056

Licaon_Kter said:
Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I just can't, I don't have access to a window machine

Both giefroot and FlashTool are for Win/Mac/Linux.

Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
I appreciate your still trying to help me.
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
I have read thoroughly and downloaded pre-rooted lollipop stock roms from the link you provided.
Once under KK, rooted, with all settings set properly (debug, security, etc...), and all caches/dalvik/data wiped, the CMW recovery just don't flash those lollipop roms. After just one sec, it says install completed but then the device still boot under KK.
TWRP doesn't even intall, so am wondering if this is even possible to get a TWRP on stock rom.
Have tried all of those with bootloader unlocked and locked, or a mix like unlocked first to be able to root a KK, then relock to flash a stock prerooted 5.1.1 (as stated in the post) but then I get a device that doesn't even boot.
Tried dualrecovery too, flash the zip, and nothing.
I suspect all of you guys have used some sort of .bat windows utility to get through this.
Once again, thanks for your help and patience.

ikho said:
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
Click to expand...
Click to collapse
The point is to go from the BEGINing _again_: Flash stock KK, giefroot, XZ, pre-rooted LP
I have done it in Linux w/ locked bootloader and stock ROM, hence my pointers.
XZDualrecovery has TWRP 2.8.7.0. But, do take note that you use Volume Down to enter PhilzTouch Recovery and Volume Up to enter TWRP.

Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
am sorry, can't find how to use giefroot on a mac.
read quite a few post of people saying that was not working for them.

Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )

Licaon_Kter said:
Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )
Click to expand...
Click to collapse
yaaay, houray it finally worked
big thanks man, you saved me $500 on that one !

G900P MM downgrade

HI I was wondering if anyone could help verify that the downgrade is possible from 6.0 to 5.0 OK4. I used Odin to flash the stock OK4 firmware to my phone when I was on the 6.0MM firmware and I just want some one that is willing to test what I did just to verify that I wasn't just lucky.
What I did was while on 6.0 I setup ADB for the phone, rebooted to download mode and used Odin3-v3.10.6 to flash G900PVPU3BOK4_G900PSPT3BOK4_G900PVPU3BOK4_HOME.tar (got this from sammobile). When phone rebooted it got stuck at the boost logo screen for longer than I liked so I used "ADB reboot recovery" command and in recovery did a factory reset and then booted into system and I am having no issues. So can some one else test this so that I know it is a 100% way to downgrade?

I just flashed the OK4 tar via odin to go back to stock and take the MM update again. I wiped everything but internal and external storage in TWRP first. It's currently downloading the MM update.

i've successfully taken the PCA update twice, and used ODIN to go back to OK4 and update once again.
the bootloader does not appear to lock firmware.

pyrochance said:
i've successfully taken the PCA update twice, and used ODIN to go back to OK4 and update once again.
the bootloader does not appear to lock firmware.
Click to expand...
Click to collapse
So you just odin back to ok4? No other steps required?
Sent from my SM-G900P using Tapatalk

djxn40 said:
So you just odin back to ok4? No other steps required?
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Correct, because when you odin OK4 it restores the stock recovery and everything else etc, so everything is stock again, system status is official etc. then you can either download the OTA as normal or take the zip from your thread and update from stock recovery. i've done it both methods.

pyrochance said:
Correct, because when you odin OK4 it restores the stock recovery and everything else etc, so everything is stock again, system status is official etc. then you can either download the OTA as normal or take the zip from your thread and update from stock recovery. i've done it both methods.
Click to expand...
Click to collapse
I assumed you couldn't revert. That's awesome though thanks
Sent from my SM-G900P using Tapatalk

I can also confirm that too, I just did a downgrade to OK4, after I unsuccessfully tried to downgrade to OA6. I assume that pyrochance (http://forum.xda-developers.com/showpost.php?p=66266625&postcount=138) is right.

If i was helpful, feel free to hit the thanks button on those posts

Are you rooted? I'm not rooted, and from BOK4 I was not able to downgrade via Odin to an earlier firmware that supports towelroot. I am now on Android 6 (OTA). Question - on Android 6 is it now possible to downgrade to an earlier firmware (without root, and without tripping knox)? If so is it only to BOK4? Thanks in advance.

ZedDedd said:
Are you rooted? I'm not rooted, and from BOK4 I was not able to downgrade via Odin to an earlier firmware that supports towelroot. I am now on Android 6 (OTA). Question - on Android 6 is it now possible to downgrade to an earlier firmware (without root, and without tripping knox)? If so is it only to BOK4? Thanks in advance.
Click to expand...
Click to collapse
Yes. You can only downgrade to OK4. If you weren't able to go to a previous version when on OK4 why would you be able to once beyond it?

Kreatur3 said:
Yes. You can only downgrade to OK4. If you weren't able to go to a previous version when on OK4 why would you be able to once beyond it?
Click to expand...
Click to collapse
Thanks Kreatur3, was thinking that with the new firmware they might have relaxed their restriction on downgrading. I would think that with any new official firmware, they could pretty much do whatever they want, like even take out all protections and allow you to root without tripping knox (which I know they wouldn't), or am I misunderstanding something?

ZedDedd said:
Thanks Kreatur3, was thinking that with the new firmware they might have relaxed their restriction on downgrading. I would think that with any new official firmware, they could pretty much do whatever they want, like even take out all protections and allow you to root without tripping knox (which I know they wouldn't), or am I misunderstanding something?
Click to expand...
Click to collapse
They could allow it but won't. It's obvious with the direction they are going with the s7. I can see why maybe providers don't want you to have that power but don't know why the manufacturer cares. Beyond the pressure from cell phone companies. I don't care about knox personally. I'm way beyond the warranty period and trip it every time the day I gety phones.

highspeedfelon said:
HI I was wondering if anyone could help verify that the downgrade is possible from 6.0 to 5.0 OK4. I used Odin to flash the stock OK4 firmware to my phone when I was on the 6.0MM firmware and I just want some one that is willing to test what I did just to verify that I wasn't just lucky.
What I did was while on 6.0 I setup ADB for the phone, rebooted to download mode and used Odin3-v3.10.6 to flash G900PVPU3BOK4_G900PSPT3BOK4_G900PVPU3BOK4_HOME.tar (got this from sammobile). When phone rebooted it got stuck at the boost logo screen for longer than I liked so I used "ADB reboot recovery" command and in recovery did a factory reset and then booted into system and I am having no issues. So can some one else test this so that I know it is a 100% way to downgrade?
Click to expand...
Click to collapse
You are a life saver it feels like i have been searching for a fix for ages and then my path led to here.
I am confirming i have downgraded successfully and i was on 6.0.1 MM tried OA6 and few more nothing worked but the OK4.
Thank You

alphadude said:
You are a life saver it feels like i have been searching for a fix for ages and then my path led to here.
I am confirming i have downgraded successfully and i was on 6.0.1 MM tried OA6 and few more nothing worked but the OK4.
Thank You
Click to expand...
Click to collapse
You are welcome.

I'm having a bit of trouble. I was on MM, then the phone started freezing up. So I went back to OK4 but I can't get past the Samsung boot up logo. It stays on there forever and doesn't move past it. I even tried to replays through Odin multiple times but still not working. I'm stuck.

How To Flash Custom 6.0.1 Roms On Locked Bootloader That Cannot Be Unlocked

The easiest method to obtain root or unlocks or update or downgrade unlocked bootloaders can be found below they were updated December of 2021​
EMMC 15 Unlocking Bootloader
2022_VZW_EMMC_15_ AIO_Tool To Unlock_Bootloader+Install_TWRP And MM_QL1_Rooted_Rom Works On Any Version Bootloaders_MM_LL_KK-Reactivation Lock Remover
This Process Will Root Phone Unlock Your VZW EMMC 15 Chipset Bootloader Install TWRP Recobery And Imstall Latest QL1 Stock Rom . Downloads S5_Root_Tools_2023.7z EMMC_15_Rom.zip -- Stock QL1 6.0 Directions For Unlocking Stock Phone I would...
forum.xda-developers.com
EMMC 15 Updating Unlocked Bootloaders Or Downgrading
2022_VZW_EMMC_15_Chipset For Unlocked Dev BL To Downgrade To LL_KK Or Upgrade To MM_And Keep Unlock Bootloader
This Process Will Update Or Downgrade Your VZW EMMC Chipset DEV Aboot Bootloader Unlocked S5 To Marshmallow 6.0 Lollipop 5.0 Or Kitkat 4.2 or 4.4 Root And Unlock Instructions Can Be Found Here EMMC 15 Rooting And Bootloader Unlocking EMMC 11...
forum.xda-developers.com
For Rooting EMMC 11 Phones
2021_VZW_Locked_Bootloader_EMMC_11_Rooted/NonRooted_Roms_With_Safestrap_MM_LL_KK
This Process Will Install On The EMMC_11 Locked Bootloader Verizon S5 Marshmallow QL1 Stock Rom NonRooted With Safestrap. Lollipop PB1 Stock Rom Rooted With Safestrap. KK Rom Rooted With Safestrap What This Does This gives you the ability to...
forum.xda-developers.com

Downgrade Files
Any Prerooted PB1 Rom
PB1_Firmware_With_PB1_Bootloader_CAUTION.zip
Place rom and PB1_Firmware_With_PB1_Bootloader_CAUTION.zip on phone
Wipe Data/System/Cache
Flash Rom
Flash PB1_Firmware_With_PB1_Bootloader_CAUTION.zip
your done. You dont need to worry about safestrap zip because you will be rooted again

Weird.....so we'll have a we can flash any Custom MM Rom......but it won't be Rooted. Progress!

Stupifier said:
Weird.....so we'll have a we can flash any Custom MM Rom......but it won't be Rooted. Progress!
Click to expand...
Click to collapse
Always need root just to install custom roms . If we can install roms without root , then we don't need root anymore ( I am still lost ). Now I can wait for custom 6.1 roms.

Its not ideal but at least you dont have to go through the whole reroot process each time you want to change roms. And you can still flash zips etc in safestrap.

Reserved

Can we run and use apps which require ROOT access?
I'm a bit confused though. Don't custom ROMs come pre-rooted???? So wouldn't flashing a custom ROM which is pre-rooted....... remain rooted?

Stupifier said:
Can we run and use apps which require ROOT access?
I'm a bit confused though. Don't custom ROMs come pre-rooted???? So wouldn't flashing a custom ROM which is pre-rooted....... remain rooted?
Click to expand...
Click to collapse
Probably no . It says by @jrkruse the flashed Roms got no root !

Stupifier said:
Can we run and use apps which require ROOT access?
I'm a bit confused though. Don't custom ROMs come pre-rooted???? So wouldn't flashing a custom ROM which is pre-rooted....... remain rooted?
Click to expand...
Click to collapse
alin919 said:
Probably no . It says by @jrkruse the flashed Roms got no root !
Click to expand...
Click to collapse
You cannot have a rooted MM rom with locked bootloader because to have root requires a custom kernel which locked bootloaders cannot flash. It doesnt matter if the rom is prerooted or not! Stock Boot.img means no root. You cannot run apps that require root with these roms All this method does if give you some options the biggest option being the ability to flash zips. and change roms with out having to odin back to stock pb1 then reroot then. Try the stock MM rom I posted. Once installed you can flash a debloatzip or a knox removal zip or delete apps from safestrap with the built in file manager If you dont like you can always downgrade back to PB1

jrkruse said:
You cannot have a rooted MM rom with locked bootloader because to have root requires a custom kernel which locked bootloaders cannot flash. It doesnt matter if the rom is prerooted or not! Stock Boot.img means no root. You cannot run apps that require root with these roms All this method does if give you some options the biggest option being the ability to flash zips. and change roms with out having to odin back to stock pb1 then reroot then. Try the stock MM rom I posted. Once installed you can flash a debloatzip or a knox removal zip or delete apps from safestrap with the built in file manager If you dont like you can always downgrade back to PB1
Click to expand...
Click to collapse
That what i thought , this is better than nothing for use with locked bootloaders . Thanks :good:

So has anyone tried it

jrkruse said:
So has anyone tried it
Click to expand...
Click to collapse
I am downloading now, I just got home.

jrkruse said:
So has anyone tried it
Click to expand...
Click to collapse
my wife's computer crashed so i have not i even went to local library and i was now allowed to download there so i have to wait until i get my wife's computer out of shop.
Sent via mobile Verizon S5

@jrkruse How does this work?
Based on my knowledge from reading this, it seems that the kernel finds the checksum of the system partition and then only boots if it is unmodified.
Shouldn't modifying the system partition in the slightest bit throw this checksum off?
Also - modified kernels CAN be flashed on locked bootloaders - just not via Odin. They only won't boot though >.>

jrkruse said:
So has anyone tried it
Click to expand...
Click to collapse
Perfect instructions @jrkruse , thank you ! Is working , it took me 11 minute to boot . Now lets see if everything is working wright .

alin919 said:
Perfect instructions @jrkruse , thank you ! Is working , it took me 11 minute to boot . Now lets see if everything is working wright .
Click to expand...
Click to collapse
So far everything is looking good , i will run today marshmallow to check it out . Tomorrow i will try to downgrade to pb1 to see if working .

Will this method work with FF? Haven't used SS since my SG4 days.
Sent from my SM-G900V using Tapatalk

I got one to try. I have tried it so I know it works
Download this rom
Download my Patch
In safestrap do a manual wipe. Wipe Data,WipeCache,Wipe System
Install Rom
Install patch
This rom Does not flash system.img so you dont need to install safestrap it will stay installed
After patch is installed wipe data and wipe cache and install MM Bootloader zip
Reboot it will take 15 to 20 min to boot
Now you will Have A Note 5 port with working theme support

Hollywood67 said:
Will this method work with FF? Haven't used SS since my SG4 days.
Click to expand...
Click to collapse
No

hey what can i do im on the MM firmware but i flashed something and now my phone just stays at the samsung logo with a blue led light what can i do it wont but up past the samsung logo screen

Update Moto g 2015 android from 5.1.1 to 6.0

Hello, so ive been getting this message in my Moto g 3gen to update to 6.0 from months now.
Im tired of this message so i want to update now from 5.1.1 to 6.0
The thing is that i have my phone rooted.
What shuld i do before updating android?
Shuld i unrooy my phone and make get it to stock format?

ilmank said:
Hello, so ive been getting this message in my Moto g 3gen to update to 6.0 from months now.
Im tired of this message so i want to update now from 5.1.1 to 6.0
The thing is that i have my phone rooted.
What shuld i do before updating android?
Shuld i unrooy my phone and make get it to stock format?
Click to expand...
Click to collapse
Just flash the latest Marshmallow image via fastboot.

acejavelin said:
Just flash the latest Marshmallow image via fastboot.
Click to expand...
Click to collapse
I want to update android ussing the message i get from my phone.
Sorry but im little new in cellphone things and dont know too much about flash and all that stuff. But i know how to unroot that is why i was asking if i will be able to update android if i unroot my phone.
Ty for reply!

ilmank said:
I want to update android ussing the message i get from my phone.
Sorry but im little new in cellphone things and dont know too much about flash and all that stuff. But i know how to unroot that is why i was asking if i will be able to update android if i unroot my phone.
Ty for reply!
Click to expand...
Click to collapse
You can unroot and update via OTA but when you have a unlocked bootloader OTA's are always risky.
Just download latest ROM for your phone and flash it, instruction are also given and is pretty easy and safe.

Iqbal Ansari said:
You can unroot and update via OTA but when you have a unlocked bootloader OTA's are always risky.
Just download latest ROM for your phone and flash it, instruction are also given and is pretty easy and safe.
Click to expand...
Click to collapse
And if i download latest ROM for my phone do i need to unroot before falshing the ROM?

ilmank said:
And if i download latest ROM for my phone do i need to unroot before falshing the ROM?
Click to expand...
Click to collapse
No. Just start flashing according to the instruction. Root is a system level thing and does not interrupt in flashing. You have to root again after flashing unless it is a pre-rooted rom.
But as you are upgrading first flash stock motorola rom whichever is latest.

Iqbal Ansari said:
No. Just start flashing according to the instruction. Root is a system level thing and does not interrupt in flashing. You have to root again after flashing unless it is a pre-rooted rom.
But as you are upgrading first flash stock motorola rom whichever is latest.
Click to expand...
Click to collapse
Ok thanks... So just to be sure (sorry im just a noob xD)
I download lastet ROM from my phone.
I flash it with TWRP?
Phone will be formated and all apps will be deleted rigth?
Will be like a phone with stock data?
I Downloaded lastest room from my phone, its 750MB.
And one last question, if i use the option to "Restore fabric configuration" is the same as installing a ROM?
Thanks again and sorry for all the questions

ilmank said:
Ok thanks... So just to be sure (sorry im just a noob xD)
I download lastet ROM from my phone.
I flash it with TWRP?
Phone will be formated and all apps will be deleted rigth?
Will be like a phone with stock data?
I Downloaded lastest room from my phone, its 750MB.
And one last question, if i use the option to "Restore fabric configuration" is the same as installing a ROM?
Thanks again and sorry for all the questions
Click to expand...
Click to collapse
Look you can do flashing and upgrading in more than one way.
Just follow this link and do exactly what it says: If you have any question PM me, I will gladly help.
Also by flashing this way your recovery will be replaced by stock recovery and you have to reflash TWRP.
Your phone will be completely stock and all data will be erased.
Note:
Read very carefully before doing anything.
Also download correct rom for your device. The model no. should match.
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750

Iqbal Ansari said:
Look you can do flashing and upgrading in more than one way.
Just follow this link and do exactly what it says: If you have any question PM me, I will gladly help.
Also by flashing this way your recovery will be replaced by stock recovery and you have to reflash TWRP.
Your phone will be completely stock and all data will be erased.
Note:
Read very carefully before doing anything.
Also download correct rom for your device. The model no. should match.
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
Click to expand...
Click to collapse
Thanks a lot!
I will do that tomorrow (going to sleep rigth now).
I'll try to do it on my own, but if i have a any quesiton i'll PM you.
Thanks a lot again.

New Update - QI2

According to the Verizon Galaxy S5 Update Page:
Android® Security Patch Level: 2017–08-01
The current software update gives you the most up to date Android security patches on your device.
Click to expand...
Click to collapse
This is basically the same thing they are doing with other devices. Since Samsung never released their September Security patch due to them addressing the BlueBorne problem, they have been re-releasing the QH* updates as QI* but they include the BlueBorne patch. For some reason, Verizon didn't include the BlueBorne patch in the changelog like they have been for every other phone.
For example. The Galaxy S6, Galaxy S8, and Galaxy S8+ updates all say
Includes: Blueborne security patch
The current software update gives you the most up to date Android® security patches on your device.
Click to expand...
Click to collapse
Who knows why they chose to include the exact same changelog as the prior update with the same security patch. Whatever. Verizon sucks. We all know it.
Stock No-Wipe Firmware:
*This will remove Developer Status/Lock your Bootloader*
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME.tar.md5.zip
Developer Bootloader Friendly/No Aboot No-Wipe Firmware:
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME_No_Aboot.tar.md5.zip
Also, I'm not sure how much longer I'll be doing this though because the screen on my S5 is going bad (flickering and flashing green whenever I bring it out of sleep) so this weekend I'm getting an S8+.

so its safe to say that the new modem ql2 is pretty much the same sa the previous update?

Updated to this build from QH2, flashed in odin, then booted up, reflashed TWRP and SU, froze system updater all good. If you do end up leaving, this will just be another loss for this model as no one else is updating the stock images anymore.

Thank you for your work on this. Does this have root, and if not, do those of us with locked bootloaders have a way to keep root and safestrap?
Tell us how the S8+ goes and if you can unlock the bootloader and root that. Thanks again!
Dudash said:
Stock No-Wipe Firmware:
*This will remove Developer Status/Lock your Bootloader*
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME.tar.md5.zip
Developer Bootloader Friendly/No Aboot No-Wipe Firmware:
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME_No_Aboot.tar.md5.zip
Also, I'm not sure how much longer I'll be doing this though because the screen on my S5 is going bad (flickering and flashing green whenever I bring it out of sleep) so this weekend I'm getting an S8+.
Click to expand...
Click to collapse

For the record, this loses root, and loses safestrap. I'm too dumb to know how to root this since I can't get TWRP on this phone, so I'm going to hope the way back to root and safestrap is get back Kitkat and then up to PB1 starting over using these steps.. This will probably be better for someone who knows what they're doing or just wants to upgrade for the security updates and doesn't care about root.
androidman807 said:
Thank you for your work on this. Does this have root, and if not, do those of us with locked bootloaders have a way to keep root and safestrap?
Tell us how the S8+ goes and if you can unlock the bootloader and root that. Thanks again!
Click to expand...
Click to collapse

I have a 15 Emmc chip and unlocked the bootloader via this thread: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
I flashed EMMC_15_VZW_QB2_STOCK_MAGISK_ROOT.zip to my phone. I also have TWRP installed.
Now, if I understand all this correctly, I can simply flash your Developler Boatloader friendly version via TWRP? This will upgrade my OS to the latest update? Then flash Magisk to get root back?
This all seems too simple.

You will also have to re-flash TWRP via Odon.

kevin98208 said:
I have a 15 Emmc chip and unlocked the bootloader via this thread: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
I flashed EMMC_15_VZW_QB2_STOCK_MAGISK_ROOT.zip to my phone. I also have TWRP installed.
Now, if I understand all this correctly, I can simply flash your Developler Boatloader friendly version via TWRP? This will upgrade my OS to the latest update? Then flash Magisk to get root back?
This all seems too simple.
Click to expand...
Click to collapse
HolyHog said:
You will also have to re-flash TWRP via Odon.
Click to expand...
Click to collapse
I too followed the instructions in the thread above for a CID 15 eMMC.
I was unable to flash the "G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME_No_ Aboot.tar.md5.zip" from the OP using TWRP, but was able to do it no problem using Odin 3.12 (AP option).
After flashing that I then used Odin again (AP option) to flash the latest TWRP (https://dl.twrp.me/klte/twrp-3.1.1-0-klte.img.tar.html). I then did another factory reset on the phone (since I had already just wiped my data following the bootloader instructions) and reinstalled Magisk from TWRP and MagiskManager.
Everything looks great so far. Thanks for this update OP and for those of you providing guidance.

I have G900VVRU2DPD1 with unlocked bootloader and twrp 3.0.0-0.
Can I flash the
Developer Bootloader Friendly/No Aboot No-Wipe Firmware:
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME_No_ Aboot.tar.md5.zip ?
If yes, after flashing, will my bootloader remain PD1 unlocked? Is it OK to have unlocked PD1 bootloader with DQI2 firmware?
Will the TWRP and root be lost? And how I can get back TWRP? Using ODIN? If root is lost then can not use flashify to flash TWRP.
If using odin to flash TWRP, then I can just flash supersu zip in zip to get root back, right?
Thanks.

I guess this is slightly off topic since it's not about this specific firmware version, but here goes ~
How do you guys go about extracting firmware/modems from stock ROM updates?? It boggles my mind lol. I'm running a OP3T now, but am working on an old device (and I still have my old S5 too). Over the years it appears people are now able to do this process for most devices and make it flashable one way or another.
I wish I understood how this gets done (and possibly figure out how to do it myself). Would love a guide / video / brief explanation with terms I could look up if it's long & involved??
Thanks for the work!

purplepenguin said:
How do you guys go about extracting firmware/modems from stock ROM updates??
Click to expand...
Click to collapse
Stock ROM update is just a tar archive with files inside.
The names of the files are mostly self-explaining.
Use some tool to access the archive, like Total Commander or 7zip archiver.

bbsc said:
Stock ROM update is just a tar archive with files inside.
The names of the files are mostly self-explaining.
Use some tool to access the archive, like Total Commander or 7zip archiver.
Click to expand...
Click to collapse
Hmmm and then to make flashable??

purplepenguin said:
Hmmm and then to make flashable??
Click to expand...
Click to collapse
Just pack what you want into tar archive and it will be flashable.
No need to attach checksum.
But it's possible too.
Say, this tar-file is flashable:

Missing apps
TraderJack said:
and reinstalled Magisk from TWRP and MagiskManager.
Click to expand...
Click to collapse
Can I reuse the same Magisk from the "EMMC_15_VZW_QB2_STOCK_MAGISK_ROOT.zip" file from the other thread on how to unlock bootloader and root, or should I download the latest Magisk and MagiskManager?
Edit 1: Okay, I installed Magisk after updating to the latest QI2 and am rooted. However, I found that I'm missing busybox and safestrap. Do I have to reinstall both of those as well or can I just reinstall busybox?
Also, QI2 lost tether/hotspot capability as it reverted back to asking to purchase the service (I'm also on the old grandfathered unlimited plan)...is there a way to get it back as when on rooted QB2?
Edit 2: Did some more research while hiding at work...so now I know, having TWRP recovery is enough and just need to reinstall busybox.
Now still need to find a way to get hotspot capability back like when on the rooted magisk QB2...
Thanks