Related
Hello guys..
Karbonn A12+ is newly launched Android phone with 1.3GHz processor and 512MB RAM...Still we didn't have Stock ROM for this model...
Now i proudly present Stock jellybean ROM for Karbonn A12+..
I prepared it to flash via SP Flash Tool..
Now don't worry to experiment with your Mobile do experiment and you can recover your karbonn A12+...
So keep learning and Do some intresting experiment and make some custom ROM...
NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...
now here are is method to flash.
(Try At Your OWN RISK...)
you Need.
1.An PC (Ofcorse you need and PC or laptop)
2. Karbonn A12+ Stock jellybean ROM (Download)
3. SP_Flash_Tool v3.1312.0.139 (other Version may not work proper)(NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...[/COLOR][/B]
Download Links:-
[url]http://a2zandroidrom.blogspot.in/2014/09/karbonn-a12-stock-jellybean-rom.html
Drivers are added...
links are
http://a2zandroidrom.blogspot.in/2014/09/karbonn-a12-stock-jellybean-rom.html
Download file is password protected..password is given in download link page...Download is available in small parts as well as in single part also...
post your review please !!
Good work Bro . . .
suthar88.sunil said:
Good work Bro . . .
Click to expand...
Click to collapse
Thanks
Phone not connecting
greatpapa said:
Hello guys..
Karbonn A12+ is newly launched Android phone with 1.3GHz processor and 512MB RAM...Still we didn't have Stock ROM for this model...
Now i proudly present Stock jellybean ROM for Karbonn A12+..
I prepared it to flash via SP Flash Tool..
Now don't worry to experiment with your Mobile do experiment and you can recover your karbonn A12+...
So keep learning and Do some intresting experiment and make some custom ROM...
NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...
now here are is method to flash.
(Try At Your OWN RISK...)
you Need.
1.An PC (Ofcorse you need and PC or laptop)
2. Karbonn A12+ Stock jellybean ROM
3. SP_Flash_Tool v3.1312.0.139 (other Version may not work proper)
Method
1. Download all files on your PC and extract them on one place.
2. now you will have two folder name by "!Files_to_FlashTool" and "SP_Flash_Tool_v3.1312.0.139"
3. Now RUN SP flash Tool.
4. now click on "scatter-loading" tab.
5. now Select "scatter file"....Sp tool will list up all the component to flash.
6.now hit the Download button on SP...you will see an warning something like user data and cache are not loaded or something...just ignore it...and click on "Yes".and now you are ready to flash.
7. Now switchoff your phone (If it is on) and pull out the battery.
8. Connect your phone while battery is out.
9.After connecting your Phone insert your battery...
10. Sp Tool will recognise your Phone and flashing will start.
11. Green circle will show that flash is Done...
Enjoy
NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...
Download file is password protected..password is given in download link page...Download is available in small parts as well as in single part also...
post your review please !!
Click to expand...
Click to collapse
My phone is not connecting. i tried many times. help me out plzzz..
Combination
vikphogat said:
My phone is not connecting. i tried many times. help me out plzzz..
Click to expand...
Click to collapse
First of all your have to install VCOM USB drivers for MTK6572 devices....
And then after hitting download button connect your phone while pressing both volume down + up button together....or try this type of different combination....
yes this is most difficult part..i tried 20 times myself....
if not working then try on different machine
As you will be connected there will be an Red and yellow line on SP tool
Next to try..
after hitting download button Press power and volume up button and then connect USB cable while pressing those key together....
Even you can try this new flash tool
http://www.mediafire.com/download/tnas2hjqruf2iht/SP_Flash_Tool_v5.1343.01_by_indiantitaniclover.zip
thanks dude..!!
greatpapa said:
First of all your have to install VCOM USB drivers for MTK6572 devices....
And then after hitting download button connect your phone while pressing both volume down + up button together....or try this type of different combination....
yes this is most difficult part..i tried 20 times myself....
if not working then try on different machine
As you will be connected there will be an Red and yellow line on SP tool
Next to try..
after hitting download button Press power and volume up button and then connect USB cable while pressing those key together....
Even you can try this new flash tool
Click to expand...
Click to collapse
i will try it surely.. can u please also provide me the link to vcom usb drivers for karbonn a12+ ?
thanks in advance.. :laugh::good:
Dri
vikphogat said:
i will try it surely.. can u please also provide me the link to vcom usb drivers for karbonn a12+ ?
thanks in advance.. :laugh::good:
Click to expand...
Click to collapse
New flashtool will recognise direct....Hope so...download new flash tool and try...
greatpapa said:
New flashtool will recognise direct....Hope so...download new flash tool and try...
Click to expand...
Click to collapse
i have tried it nearly 15 16 times. but when i put battery presing and holding volume up + down button phone goes to factory mode. 8 options written in chinese are showing up.
Powrer
vikphogat said:
i have tried it nearly 15 16 times. but when i put battery presing and holding volume up + down button phone goes to factory mode. 8 options written in chinese are showing up.
Click to expand...
Click to collapse
First click on download in flashtool...then press
power + volume up and connect while pressing...Working for me..tested by myself...
hard bricker karbonn a12+........
Great work and nice tutorial some how unbricked my phone 100% working
\\beginers dont post any spam without reading the complete tutorial as I did
thanks a lot for helping
not working
greatpapa said:
First click on download in flashtool...then press
power + volume up and connect while pressing...Working for me..tested by myself...
Click to expand...
Click to collapse
plz help it's not working.installed usb driver & latest sp flash tool.still not working ????
Fastboot
Lovesahota said:
plz help it's not working.installed usb driver & latest sp flash tool.still not working ????
Click to expand...
Click to collapse
Hello....
Try this one..
Switch off your mobile...
Now press volume up + Power button...
Then you will see three option something like Recovery, fastboot, factory...
You have to choose fastboot option...
when fastboot is selected then connect your phone to PC via USB cable...this will install some helpful drivers to your PC....and then again try the flash method without battery...
Stuck at the EYE boot screen of Karbonn A12+. Any help please? Yes, I followed the instructions carefully.
http://playrangers.com/KarbonnA12plus/
in that page the usb drivers of 6577 is provided. Kindly provice MT6572 VCOM drivers.
Process DOne ?
nightcrawler218 said:
Stuck at the EYE boot screen of Karbonn A12+. Any help please? Yes, I followed the instructions carefully.
http://playrangers.com/KarbonnA12plus/
in that page the usb drivers of 6577 is provided. Kindly provice MT6572 VCOM drivers.
Click to expand...
Click to collapse
Did you flashed in proper way ?
means your Sptool recognise your mobile and did you see red and yellow line in sptool and was process done or not ?
greatpapa said:
Did you flashed in proper way ?
means your Sptool recognise your mobile and did you see red and yellow line in sptool and was process done or not ?
Click to expand...
Click to collapse
yeah, everything was according to the tutorial. phone was detected, first red, then blue then yellow progress bar & finally green circle. I removed the usb & reinserted the battery after flashing then pressed the power button. Karbonn animation shown & stuck at the eye screen. After a number of failed attempts I decied to erase the whole device & then flash again. I erased flash+bootloader. The phone is dead now. not powering up. But if I connect the phone via usb to pc a beep sound is heard. Any clue, how to restore the bootloader?
How
nightcrawler218 said:
yeah, everything was according to the tutorial. phone was detected, first red, then blue then yellow progress bar & finally green circle. I removed the usb & reinserted the battery after flashing then pressed the power button. Karbonn animation shown & stuck at the eye screen. After a number of failed attempts I decied to erase the whole device & then flash again. I erased flash+bootloader. The phone is dead now. not powering up. But if I connect the phone via usb to pc a beep sound is heard. Any clue, how to restore the bootloader?
Click to expand...
Click to collapse
How did you erase the Bootloader....??
if you have deleted your bootloader then it would be diffecult to revive the phone
greatpapa said:
How did you erase the Bootloader....??
if you have deleted your bootloader then it would be diffecult to revive the phone
Click to expand...
Click to collapse
I Used SP flash tool to format the device. There was an option for erasing everything (Flash + bootloader).
Will the service center accept my case.?
Ummm
nightcrawler218 said:
I Used SP flash tool to format the device. There was an option for erasing everything (Flash + bootloader).
Will the service center accept my case.?
Click to expand...
Click to collapse
Try again whole method...if you are hearing an beep sound....
Does your mobile is going in recovery mode or fastboot mode ?
Power + volume up (battery is inserted)
greatpapa said:
Try again whole method...if you are hearing an beep sound....
Does your mobile is going in recovery mode or fastboot mode ?
Power + volume up (battery is inserted)
Click to expand...
Click to collapse
Thanks a million times man for your suggestion.
I tried with fastboot but no device shown. I went to device manager & uninstalled-then reinstalled the drivers. That actually helped me to build the serial communication between SP flash tool & Device.
Then I discarded the battery & retried the SP flash tool, this time the phone is finally detected & flashed successfully. red, blue, yellow bar then green circle. DONE.
Now, the same issue. Karbonn boot animation is displayed & stuck at the eye screen. I have covered the halfway but cant be able to get success in the other half (cant see the homescreen or anything.)
---------- Post added at 09:15 PM ---------- Previous post was at 09:07 PM ----------
Phone is OK now but it says INVALID IMEI... any suggestions please...
Good
nightcrawler218 said:
Thanks a million times man for your suggestion.
I tried with fastboot but no device shown. I went to device manager & uninstalled-then reinstalled the drivers. That actually helped me to build the serial communication between SP flash tool & Device.
Then I discarded the battery & retried the SP flash tool, this time the phone is finally detected & flashed successfully. red, blue, yellow bar then green circle. DONE.
Now, the same issue. Karbonn boot animation is displayed & stuck at the eye screen. I have covered the halfway but cant be able to get success in the other half (cant see the homescreen or anything.)
---------- Post added at 09:15 PM ---------- Previous post was at 09:07 PM ----------
Phone is OK now but it says INVALID IMEI... any suggestions please...
Click to expand...
Click to collapse
Don't worry....
Now your phone will be fine....As i will get time i will give you tutorial to write your IMEI number....Till then you can search and google it....your phone is ok...will recover it soon....
I wanted to put a new rom on my Lenovo, so I started here: http://forum.xda-developers.com/lenovo-a850/general/tutorial-install-cwm-twrp-lenovo-a850-t2642431
I thought making a backup would be wise.
My Baseband model did not have ROW or CN in it, so after trying all four options EN/CN CWM/TWRP options, all failed an my phone would just reboot.
May be my mistake was trying a few more versions of CWM/TWRP, after one of which my Baseband model was gone...
So I decided to just go ahead and install a new rom without a backup. I installed the VCOM drivers (Win 8.1, a bit of hassle) and downloaded: http://www.needrom.com/download/a850-stock-s123-multilanguagegappsroot/
Тhе flashing process went OK (I got the green circle), but after disconnecting my phone and putting the battery back in, it would not start at all. Not even recovery mode.
I tried flashing another rom, but the PC/flash tool would not detect the phone again.
Тhe only sign of life is the red led when I connect the USB to the PC (without battery).
Any help would be appreciated.
P.S.: Also the phone stopped detecting my SIM cards while trying different CWM/TWRP versions.
P.P.S.: I actually was able to get a response from the flash tool by holding power, volume + and volume -, and got: ERROR 4032 : Enable DRAM failed!
mandulov said:
I wanted to put a new rom on my Lenovo, so I started here: http://forum.xda-developers.com/lenovo-a850/general/tutorial-install-cwm-twrp-lenovo-a850-t2642431
I thought making a backup would be wise.
My Baseband model did not have ROW or CN in it, so after trying all four options EN/CN CWM/TWRP options, all failed an my phone would just reboot.
May be my mistake was trying a few more versions of CWM/TWRP, after one of which my Baseband model was gone...
So I decided to just go ahead and install a new rom without a backup. I installed the VCOM drivers (Win 8.1, a bit of hassle) and downloaded: http://www.needrom.com/download/a850-stock-s123-multilanguagegappsroot/
Тhе flashing process went OK (I got the green circle), but after disconnecting my phone and putting the battery back in, it would not start at all. Not even recovery mode.
I tried flashing another rom, but the PC/flash tool would not detect the phone again.
Тhe only sign of life is the red led when I connect the USB to the PC (without battery).
Any help would be appreciated.
P.S.: Also the phone stopped detecting my SIM cards while trying different CWM/TWRP versions.
P.P.S.: I actually was able to get a response from the flash tool by holding power, volume + and volume -, and got: ERROR 4032 : Enable DRAM failed!
Click to expand...
Click to collapse
Welp, bad luck happened. Try getting it seviced to Lenovo Center.
irfanadli97 said:
Welp, bad luck happened. Try getting it seviced to Lenovo Center.
Click to expand...
Click to collapse
Very helpful, thank you...
After trying many different SP Flash Tool versions and ROM, I was actually able to resurrect my Lenovo by doing a Firmware Upgrade with the latest SP Flash Tool (version 5 something) and using a A850i ROM from needrom.com
No issues so far, but I'm basically back where I started from
i think u have flashed a850 4gb version firmware. same thing happen to my phone. but fixed it with a850i firmware.
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Reserved
Nice Guide, Can you please list MTK devices ????
421rahman said:
Nice Guide, Can you please list MTK devices ????
Click to expand...
Click to collapse
OK, Will be adding attachments later, Thanks
Salman
--
Thanks @Salman Al-Badgail for this use full info.
Deena Khanam said:
Thanks @Salman Al-Badgail for this use full info.
Click to expand...
Click to collapse
welcome & Thanks
@jamsubzero check this guide
@jamsubzero I saw your post and thread regarding Dead Bricked
Hey guys.
I own a lenovo A328. For the past couple of months my phone, gets poping up "com.google.etc.etc has stopped".
I tried doing a factory reset, but no luck. Then I learn that I can flash it using SPflash tool with the stock firmware.
And luckily, I did it, my phone back to normal. But then, a few couple of weeks, it started to pop up the same error messages again until I can't do anything on my phone, and unitl it boot loops. So, I reflash again with the same firmware (stock).. and it works again. And same thing keeps repeating and repeating;
until I thought I can try to change the options in sp flash tool..
Instead of "Download only", I choose, "Firmware upgrade".... the flashing finished successfully.
BUT when I press the power button to turn it on, nothing happens, and when I charge it, I cant see the charging screen (or it's not actually charging). I'm sure that it is charging before the flashing, and the power button is working.
When I connect it to the computer, i hear a "connected" sound, then "disconnected", and repeating.
i also tried to reflash it, both the "DL only" and "Firmware upgrade", even the "Format all + ...."
and it flashed successfully (meaning, computer still recognized it), but still not turning on.
Please help me. please.
Click to expand...
Click to collapse
NEVER DOWNLOAD ROM NOT MEANT FOR YOUR PHONE. IT WILL BRICK IT !
What you did is you flashed wrong firmware to your device and the result you in Dead Brick, However there is still solution for your problem. Please Please Please do a proper search first and download correct firmware and other necessary files for your device. Please check firmware number ok.
You can Flash it again but you need to open phone and try, Check here for better understanding.
GUIDE : HERE. Or else please go to any mobile shop and ask them to flash. Dont tell the original reason that you tried to flash or etc. Tell them that it stop suddenly and for now I am unable to access it. They charge you about 5-15 USD based on your country, for me they had charged 10U$D me for lenovo A3500-HV dead flashing. Hope this help you.
i got no scatter file in stock rom pls help!
Aller retour si flash tool
Hard bricked Lenovo a7000
**Hi I got problem on yesterday I was install ing new Rom but suddenly my Lenovo a7000 hard brick
It is not responding any point .even charging .and charging light also .it's dead
But it when I connet to my pc it's connecting sound conning from pc ....My phone is dead plaease help
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks [email protected]
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
S
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
---------- Post added at 07:47 PM ---------- Previous post was at 07:47 PM ----------
Salman Al-Badgail said:
Reserved
Click to expand...
Click to collapse
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
im having mt8127 mtk device it is not flashing iam having corrupted preloader i tried to flash the preloader it is not flashing , can any body knows to fix it??
How can a phone that's bricked be switched off? Am a bit confused.
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
i am trying to flash vivo s7 and the cable shake and since then the phone is dead, have flashed it several time, it complete but it refuse to on
I need help please
Basically I was flashing updates for my CUBOT Nova and everything was going fine and I tried out this custom recovery which wouldn't mount any partition so it didn't really suit me. And I did this a dozen of times with other recoveries and if anything happened I had the firmware in SP tools ready to be flashed and if I could save going to it I just used the fastboot to flash it, and so I decided to completly stop and just put my phone back to normal and because I done it before I formatted the whole flash, (and FYI every 2 times I plugged in the phone powered off my computer always searched for drivers in the windows update but it failed and so everything still worked) but after I formatted it and plugged it out and in to download the firmware, my computer successfully installed the drivers and at this moment I was like shoot so I tried to download and it didnt recognise my phone and so I uninstalled the driver my computer installed and see if it worked and it kept installing it again, so I decided to uninstall every mtk driver I had and rebooted, when I installed every single driver again it tried to download drivers from the windows update but it failed and on the sp flash tools it goes to 100% on the Downloading DA (so the red bar) and stays like that for a while and I get notifications that I have a unrecognisable usb device and after a while it gives me randomly 2 errors 0xC0050005 and 0XC0060001 and I know someone is going to tell me I dont have the right firmware or that it's not the right ones but it isn't I got from the official Cubot website and I got an early versions from firmwarefiles I think and none of them work, now I just have a phone without anything on it and I cant flash anything on it until I just hope someone would walk me through what to do I would appreciate so much I'm sorry I wrote so much as I had to explain in max detail as I could what happened!
netcrafy said:
How can a phone that's bricked be switched off? Am a bit confused.
Click to expand...
Click to collapse
i wanted to say the same thing, also i tried enter EDL for 2 days DD (helio G80) LMFAO
Hi there
I would like to know if you can help me in repairing my device.
So i wanted to do an upgrade on the tablet and i messed it up.
I was on CMW recovery at first and then i did a format on cache system and data. but when i wanted to flash the rom CM14.1 it fail and the devices restarted.
the screen goes on but i can see faint lines on the screen.
I did make a back up of the rom and tried to flash it back but it didnt work.
I used all the roms and it still didnt work. I tried many SP flash tool and formating and still not working. every single rom has been flash and all are green but the phone does not want to boot. i have youtube and followed the instructions and every single step i can think of but u have a gut feeling i am mssing something.
I cannot write SN on the fone as it will not work. i have uninstalled all the drivers re-install all the drivers did all the instruction that you have provided but still it will work.
the tablet does still detect on the PC and it does work. so basically it is in a bootloop but its not powering up. Some suggested using MRT TOOLS or MIRACLES but i have a problem with that as it always have a virus attached it to and when i download it the pc removes it. so i dont know where i can get a good crack tool.
i really need your help if you can.
Hello Guys
i closed SP tool while flashing
my phone : infinix hot 10s
i cant power on it and cant join fastboot and cant join bootloader
When i connect phone by orginial usb
computer said (USB not recoginzed)
i installed all drivers but now phone is dead and he was rooted so i cant going to warranty
how i fix it?
Hello,
After unlocking the bootloader and installing TWRP on my OUKITEL K6000 Plus I was trying to install madOS, but unfortunately my phone went into Orange State bootloop. I could not enter fastboot anymore, and at some point even Recovery stopped to work. My phone was almost dead. I was looking for solutions but actually there was no clear guide how to revive a patient. I found that many people have similar issue so when I finally managed to resurrect my K6000 with original stock ROM I decided to share my solution.
Here's the fix:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
2. Install SP Flash Tool if you don't have it yet. You can find it easily with google.
3. Download original stock K6000 Plus ROM V6.0. You can find it easily on needrom website (NOTE: you have to create an account on needrom if you don't have it yet). Unpack it.
4. Launch SP Flash Tool, go to Options->Option... in Connection settings change USB speed to Full speed and Battery to with battery. Close Option window.
5. In SP Flash Tool go to Download tab, click on choose right next to Scatter-loading file field, navigate to the folder where you unpacked previously downloaded stock K6000 Plus ROM V6.0. Open MT6750_Android_scatter.txt file.
6. In open menu choose Download Only if it's not selected by default. All fields below should have tick enabled. I mean for 'preloader', for 'recovery', etc...
7. Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
8. In SP Flash Tool click Download icon (the one with green arrow), all the fields should become inactive.
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If you have STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) error after you connect it means you don't have DA version of MediaTek driver properly installed (step no. 1).
11. Your phone should start to flash up and you should see the progress in SP Flash Tool status bar. You can release VOL UP and POWER button now. The process may take long time, for me it was more than 1 hour. The longest part was flashing up the [system]. The good thing is you can observe the progress during whole process.
12. When flashing process is end you will see a small window with the information about completion. Now you can unplug your phone, and launch it with POWER button. You should still see the Orange State message but right after that your phone should boot up into normal mode with freshly uploaded original stock ROM. Congratulations!
Hopefully this will also fix your K6000 Plus and maybe even other models.
I'm really sorry I don't provide any direct links, but I haven't posted 10 posts yet and my XDA account is still limited.
Regards,
Slavedriver
Please help I have error 4032 (BROM ERROR S_FT_ENABLE_DRAM_FAIL)
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
this should solve that
STATUS_BROM_CMD_SEND_DA_FAIL
persists even after installing correct drivers?
Solution: Choose
Download Agent as DA-PL in SP flash tools. And follow the same guide.
Thank you so much for this post, just saved an Oukitel K6000 Plus. Just finished process, rebooting normally for first use. It's been stressfull hours, what a relieve.
slavedriver83 said:
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If
Click to expand...
Click to collapse
this helped me a lot with my ulefone armor 2, thanks
Fixed the orange state, thanks a lot for this guide.
Do you think I shall try again to upgrade to Android 8 anymore?
slavedriver83 said:
9. Using one hand only click and hold at the same time VOL UP + POWER button.
Click to expand...
Click to collapse
Thank you very much for the advice
I thought I put my phone in the trash when I read this.
But in point 9 I had to push only the VOL UP if I press the two buttons, the AP returns an error.
You saved mine as well, slavedriver!
And it is a Teclast Tpad A10S!
I had given it up.
Thanks a lot!
It works also on U20 plus. I had to select DA_SWSEC as Download Agent. Thank you so much!
Guide worked Perfectly for me.
My mobile was bricked in the same Bootloop. The guide worked perfectly for me. Thanks a lot for useful and detailed help.
I understand this thread is almost 1 year old. I tried this procedure and everything went well. The only problem the phone does not boot. It does turn on but nothing comes up. No boot menu no logo just a few flickering lights and a very dark background. Does anyone have any ideas?
OK6000 Plus
pvkid said:
I understand this thread is almost 1 year old. I tried this procedure and everything went well. The only problem the phone does not boot. It does turn on but nothing comes up. No boot menu no logo just a few flickering lights and a very dark background. Does anyone have any ideas?
OK6000 Plus
Click to expand...
Click to collapse
Tried this guide but SP shows the following messagge "STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060005) " (so it doesn't end with 3 but with 5)
Pyandroid said:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
this should solve that
Click to expand...
Click to collapse
Bro I got a different error just looks like:
ERROR STATUS_SEC_AUTH_FILE_NEEDED (0xc0030012)
Please help me out...I use "tecno spark 4 kc2"
slavedriver83 said:
Hello,
After unlocking the bootloader and installing TWRP on my OUKITEL K6000 Plus I was trying to install madOS, but unfortunately my phone went into Orange State bootloop. I could not enter fastboot anymore, and at some point even Recovery stopped to work. My phone was almost dead. I was looking for solutions but actually there was no clear guide how to revive a patient. I found that many people have similar issue so when I finally managed to resurrect my K6000 with original stock ROM I decided to share my solution.
Here's the fix:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
2. Install SP Flash Tool if you don't have it yet. You can find it easily with google.
3. Download original stock K6000 Plus ROM V6.0. You can find it easily on needrom website (NOTE: you have to create an account on needrom if you don't have it yet). Unpack it.
4. Launch SP Flash Tool, go to Options->Option... in Connection settings change USB speed to Full speed and Battery to with battery. Close Option window.
5. In SP Flash Tool go to Download tab, click on choose right next to Scatter-loading file field, navigate to the folder where you unpacked previously downloaded stock K6000 Plus ROM V6.0. Open MT6750_Android_scatter.txt file.
6. In open menu choose Download Only if it's not selected by default. All fields below should have tick enabled. I mean for 'preloader', for 'recovery', etc...
7. Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
8. In SP Flash Tool click Download icon (the one with green arrow), all the fields should become inactive.
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If you have STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) error after you connect it means you don't have DA version of MediaTek driver properly installed (step no. 1).
11. Your phone should start to flash up and you should see the progress in SP Flash Tool status bar. You can release VOL UP and POWER button now. The process may take long time, for me it was more than 1 hour. The longest part was flashing up the [system]. The good thing is you can observe the progress during whole process.
12. When flashing process is end you will see a small window with the information about completion. Now you can unplug your phone, and launch it with POWER button. You should still see the Orange State message but right after that your phone should boot up into normal mode with freshly uploaded original stock ROM. Congratulations!
Hopefully this will also fix your K6000 Plus and maybe even other models.
I'm really sorry I don't provide any direct links, but I haven't posted 10 posts yet and my XDA account is still limited.
Regards,
Slavedriver
Click to expand...
Click to collapse
Solution?
for:
ERROR STATUS_SEC_AUTH_FILE_NEEDED (0xc0030012)
"Tecno spark 4 kc2"
slavedriver83 said:
Hello,
After unlocking the bootloader and installing TWRP on my OUKITEL K6000 Plus I was trying to install madOS, but unfortunately my phone went into Orange State bootloop. I could not enter fastboot anymore, and at some point even Recovery stopped to work. My phone was almost dead. I was looking for solutions but actually there was no clear guide how to revive a patient. I found that many people have similar issue so when I finally managed to resurrect my K6000 with original stock ROM I decided to share my solution.
Here's the fix:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
2. Install SP Flash Tool if you don't have it yet. You can find it easily with google.
3. Download original stock K6000 Plus ROM V6.0. You can find it easily on needrom website (NOTE: you have to create an account on needrom if you don't have it yet). Unpack it.
4. Launch SP Flash Tool, go to Options->Option... in Connection settings change USB speed to Full speed and Battery to with battery. Close Option window.
5. In SP Flash Tool go to Download tab, click on choose right next to Scatter-loading file field, navigate to the folder where you unpacked previously downloaded stock K6000 Plus ROM V6.0. Open MT6750_Android_scatter.txt file.
6. In open menu choose Download Only if it's not selected by default. All fields below should have tick enabled. I mean for 'preloader', for 'recovery', etc...
7. Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
8. In SP Flash Tool click Download icon (the one with green arrow), all the fields should become inactive.
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If you have STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) error after you connect it means you don't have DA version of MediaTek driver properly installed (step no. 1).
11. Your phone should start to flash up and you should see the progress in SP Flash Tool status bar. You can release VOL UP and POWER button now. The process may take long time, for me it was more than 1 hour. The longest part was flashing up the [system]. The good thing is you can observe the progress during whole process.
12. When flashing process is end you will see a small window with the information about completion. Now you can unplug your phone, and launch it with POWER button. You should still see the Orange State message but right after that your phone should boot up into normal mode with freshly uploaded original stock ROM. Congratulations!
Hopefully this will also fix your K6000 Plus and maybe even other models.
I'm really sorry I don't provide any direct links, but I haven't posted 10 posts yet and my XDA account is still limited.
Regards,
Slavedriver
Click to expand...
Click to collapse
Hi, do I need my phone to be rooted to do this.
I unlocked bootloader in my gionee f205 from fastboot and now it is in orange state bootloop.
I haven't rooted my phone before doing it.
So I recently changed phones, as one of my main hobbies is tinkering with Smartphones and their respective OS's , I decided to Unlock my Xiaomi Redmi 9A (My previous phone) and flashed Ubuntu Touch to it as it was stated as a supported device, using their prebuilt simple installer app seemed to work but midway through the install the installer crashed and the phone powered off, When I turned it I realised it was stuck in a Bootloop, I tried Power + Vol Up for Recovery, that didn't work and neither did Power + Vold Down for Fastboot i tried ADB to push a command to enter EDL (Qualcomm Emergency Download Mode) but that didn't work either. Does any body have any suggestions for how I could get this device running again?
Hector_GH11 said:
Hector_GH11 said:
So I recently changed phones, as one of my main hobbies is tinkering with Smartphones and their respective OS's , I decided to Unlock my Xiaomi Redmi 9A (My previous phone) and flashed Ubuntu Touch to it as it was stated as a supported device, using their prebuilt simple installer app seemed to work but midway through the install the installer crashed and the phone powered off, When I turned it I realised it was stuck in a Bootloop, I tried Power + Vol Up for Recovery, that didn't work and neither did Power + Vold Down for Fastboot i tried ADB to push a command to enter EDL (Qualcomm Emergency Download Mode) but that didn't work either. Does any body have any suggestions for how I could get this device running again?
Click to expand...
Click to collapse
Yea sure, try flashing with Sp Flash Tool
(Btw this device isn't a Qualcomm procesor so no EDL).
You can solve it with Sp Flash Tool
Needs:
- Pc/Laptop
- Usb Cable
- Miui Rom ( Choose your version : https://xiaomifirmwareupdater.com/miui/dandelion/ )
- Mtk Bypass Tool + LibUsb : https://www.bypassfrpfiles.com/2021/02/mediatek-bypass-tool-mct/
( You have some steps to do here - see the website)
-----------------------------------------------------------------
Flashing :
1. Download all the things I gived to you + drivers.
2. Extract and open Sp Flash Tool and MTK Bypass Tool ( Be sure to install the libusb driver)
3.Open MTK Bypass Tool and click on Bypass button.
4. Hold all the buttons from the phone ( or try power + vol up / down, if all doesn't work)
5. When holding the buttons, connect the phone to the pc, wait a few seconds until it finishes to bypass ( Wait ~2 seconds more after bypassing - holding the buttons) ( Hold buttons - connect phone --> PC with usb cable -- wait like 2 seconds after bypassing to work properly.)
6. Open Sp Flash Tool.
7. Select your download agent ( MTK_AllinOne) - from program folder
8. Select your rom in scatter file section ( to be more exactly, choose the mt6765...... File from the rom)
9. Be sure to check Sp Flash Tool Settings - check if u have selected your device port
10. Where it shows - *"Download Only*" ( you can use that, but for me worked Firmware upgrade) - NOT Format
11. Press download button from up
12. If you need help, here is my discord :
raresgabriel #4803
Click to expand...
Click to collapse
Click on " Click to expand" to see the instructions
Rares6567 said:
Click on " Click to expand" to see the instructions
Click to expand...
Click to collapse
Thanks, Will Try!
Hector_GH11 said:
Thanks, Will Try!
Click to expand...
Click to collapse
Ok, Good Luck!!!!
Rares6567 said:
Ok, Good Luck!!!!
Click to expand...
Click to collapse
It's stuck on a Red Bar saying Downloading DA 100%, and it doesn't do anything else. The phone shows up on Mediatek COM Port 5.
It now says USB Device not Recognised. Yada yada yada, USB device corrupted.
Hector_GH11 said:
It now says USB Device not Recognised. Yada yada yada, USB device corrupted.
Click to expand...
Click to collapse
Ok so discord
Rares6567 said:
Ok so discord
Click to expand...
Click to collapse
I still have this problem my pc does not tell me (usb not recognized) What I wanted to do was downgreade from 12.5.6 to 12.0.5. but my redmi is dead
N0tvich said:
I still have this problem my pc does not tell me (usb not recognized) What I wanted to do was downgreade from 12.5.6 to 12.0.5. but my redmi is dead
Click to expand...
Click to collapse
You need to take the phone case and unplug the battery, and try to flash again.
Rares6567 said:
You need to take the phone case and unplug the battery, and try to flash again.
Click to expand...
Click to collapse
The battery thing worked for me (now I can't go from there, Mr. disconnects and Mr. connects) I was able to get there, I don't know how to continue
N0tvich said:
The battery thing worked for me (now I can't go from there, Mr. disconnects and Mr. connects) I was able to get there, I don't know how to continue
Click to expand...
Click to collapse
Unplug and plug the battery and connect phone.
Try reinstalling drivers