Hi All,
I am looking for some assistance.
SM-J110F device. Incorrectly loaded ROOTJ111M via Odin to the Phone.
After the bootloader uploaded, the phone was only stuck on the startup screen.
Samsung Galaxy J1 logo.
Only able to log into Android System Recovery <3e> with the phone.
Could not get odin to see the phone again.
adb fastboot commands wont respond. Could only adb sideload to the phone.
Manged to get the phone back to defaults. Found the stock firmware with all the various elements and restored it.
This was resolved
Related
Hi I was trying to upgrade the Android Version on a Galaxy S2.
I installed Clockwork Mod Recovery and was able to boot into it but couldn't access the SD for installing image.
I booted into the downloading screen ( vol down and power on boot ) and installed an image then bootloader via Odin.
Now when I boot there is the standard Samasung Galaxy S2 logo and I can't access the downloading screen or clockwork mod and it just goes to the animated S logo with usb not recognized appearing on the connected Windows box.
Is there anyway to restore from this point?
Are you able to access the phone through ADB?
If yes, run: adb reboot download, and this should put you in downlaod mode so you can odin a new firmware.
If no adb access, Does odin recognize the phone?
If yes, you should be able to odin a new firmware.
Make sure when you flash the new firmware you are using the correct rom for your device. ie: from your post you have a GS2 I9000 which is not the same as the GS2 SGH-T989.
you would use roms from this forum: http://forum.xda-developers.com/forumdisplay.php?f=665
If you are unable to flash a rom you can always purchase a download mode jig to get you into download mode if you have not Hard Bricked the phone. If you have Hard Bricked your phone there are a couple of sites that do Jtag repair to unbrick your phone.
Good Luck
No reponse from Odin or ADB
I have purchased a download mode jig hopefully it will work.
Thanks for your advice
My device all the sudden restarted and entered now a continues restart booting. the Samsung logo appear only and device restarts.
I tried to install a new stock rom with odin, but i keep getting Fail error. tried to install a stock recovery with odin but fail error is what am getting too...
the device boot to download mode only and i cant boot to recovery mode.
I didnt download custom rom or recovery didnt root. the device out of no where bricked any help is appreciated...
Up up up
I don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. Any tip to fix it? The device was rooted before the 5.1.1 android update.
Help me please :crying:
ZioBanana said:
I don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. Any tip to fix it? The device was rooted before the 5.1.1 android update.
Help me please :crying:
Click to expand...
Click to collapse
Download smart swich to your pc got to emergencey recovery in the secound tab at top right put your model number and serial number in then it will ask you to put the phone into dl mode then it will fash stock back onto your phone
I have a Samsung Galaxy S Duos GT-S7562 which stopped working with no warning a few months ago. The device has stock Samsung firmware and has never been rooted.
On power-up the device hangs on the Samsung logo.
When a charger is attached the battery charge animation is frozen.
Both stock recovery and download mode are working.
Attempted a factory reset and clear cache through recovery mode. Both showed as successful. Still hangs at Samsung logo.
Attempted to flash official Samsung stock firmware through Odin3. Flash succeeds with no error but restart still hangs at Samsung logo.
Attempted to flash TWRP recovery through Odin3. Flash succeeds with no error but recovery mode still comes up as stock rather than custom.
Why would Odin3 report a successful TWRP recovery flash but the device still boots the stock recovery? I have another identical S7562 that I successfully flashed the same TWRP recovery and Samsung stock firmware using the same setup, Odin3, PC and USB cable. Both are unlocked devices. Disabling auto-restart in Odin3 and attempting to boot straight to recovery after flashing doesn't help.
I suspect that a JTAG recovery may be my only option but from what I've read it should only be attempted if stock recovery and download mode are *not* working. In my case both appear to be working. Would a JTAG recovery help in this case?
Could there be some sort of NAND memory failure that does not result in any error messages during an Odin3 flash?
Thank you for any help!
I guess JTAG is the only way. Sorry.
Hi all,
My phone recently went dead and was stuck in a recovery loop and I could only access download mode. I decided to try flashing firmware from (https://www.sammobile.com/samsung/g...e/SM-G935F/XSG/download/G935FXXS8ETCA/328689/) using odin but was unsuccessful until I used the odin launcher provided from (https://forum.xda-developers.com/t/odin-3-11-1-for-galaxy-s7-series.3377390/) which allowed me to flash the files. However, the phone was still stuck in a recovery boot loop and I'm not sure if I can still recover photos from my phone. The phone model is SM-G935FD and the product location was XSG.
Appreciate any help and suggestions from you guys!