Few weeks ago i got a LG G7 “UNLOCKED” on ebay, the phone had a sticker where it said model “LGG710PM”, the bad news i was stuck with a FIRMWARE LM-G710ULM (V10b-LAO-COM) MAY 2018. I tried updating the phone via OTA or LGBridge and i had no luck. So i looked online for the correct KDZ file for the LGG710PM and also no luck, So what i did is look for a G710ULM KDZ, but the only one the i could find was the G710ULM10G_00 (https://www.mylgphones.com/lg-g7-thinq-project-fi-stock-firmware-g710ulm10g.html) . So after searching online and watching some videos on youtube if this could work, i found a youtuber video (MAXLEE) he change a FIRMWARE of sprint to a Canadian FIRMWARE and it work he did it on a LG G6. So what i did is try it on MY G7 model LGG710PM“ the only thing is that on the G7 there's a few more steps to do:
1) Download G710ULM10G_00 KDZ file
https://www.mylgphones.com/lg-g7-thinq-project-fi-stock-firmware-g710ulm10g.html
2) Download LGUP and install (make sure to use this link for download and follow instructions, like this you don't get an error when
you insert the KDZ file and hit START).
https://mega.nz/#!kCpHBaia!xZmico6MYL1T07ffuc8z6cCbs5oU4pKEz5VG-AwfvV0
A) Make sure you don't have LGBrige installed, if so UNINSTALL and delete any folder of LGBridge after you have uninstalled
(C:\Program Files (x86)\LG Electronics)
B) Download the LGUP zip file and unzip, if you don't have the drivers install lgdrives(The file is inside the folder LGUP-LG G7 ThinQ).
After that install “LGUP_Install_Ver_1_14_3 (1).msi “ file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C) After installing LGUP you must go to C:\Program Files (x86)\LG Electronics\LGUP and copy the first three files(CODEFIRE, LOG,
model) from the UNZIPED FILE from step B.
D) Go to file “model” (C:\Program Files (x86)\LG Electronics\LGUP\model) then go to file “common”....go to step “E” don't close the
window….
E) Go to the UNZIP FOLDER, go to file WindowsLGFirmwareExtract-1.2.6.1-Release. Run “WindowsLGFirmwareExtract.exe” and select
the KDZ file you downloaded, then make sure you
check on “LGUPc.dll. EXTRACT KDZ.
F) A file “LGUPc.dll” will be created, Copy that file into the folder “common”...... you should had left that window open from step “D”. Rename the actual “LGUP_Common.dll” to
“LGUP_CommonDDD.dll” and “LGUPc.dll” to “LGUP_Common.dll” and then deltate the “LGUP_CommonDDD.dll”.
Open LGUP...put your phone in download mode... select the KDZ file you downloaded from step “1” and in PROCESS select REFURBISH…. Then click START.
Thanks for posting the guide but I don't see any links to download the files on step 2
hytl said:
Thanks for posting the guide but I don't see any links to download the files on step 2
Click to expand...
Click to collapse
True, already put the link, thanks.
Radha09 said:
True, already put the link, thanks.
Click to expand...
Click to collapse
Thank you. I wonder after we upgrade to this firmware, will we be able to get OTA update?
hytl said:
Thank you. I wonder after we upgrade to this firmware, will we be able to get OTA update?
Click to expand...
Click to collapse
i hope so....
I got SPC Code does not match error.
hytl said:
I got SPC Code does not match error.
Click to expand...
Click to collapse
Where did you get that error?
After I click start in LGUP
hytl said:
After I click start in LGUP
Click to expand...
Click to collapse
Did you see the video from Victor Hernandez i know its in Spanish but just to make sure you made the steps.... and one more thing i forgot to mention is that before putting start you need to have you phone in download mode here's a link ....... https://www.youtube.com/watch?v=EkKfPPBzJ1c
Radha09 said:
Where did you get that error?
Click to expand...
Click to collapse
Radha09 said:
Did you see the video from Victor Hernandez i know its in Spanish but just to make sure you made the steps.... and one more thing i forgot to mention is that before putting start you need to have you phone in download mode here's a link ....... https://www.youtube.com/watch?v=EkKfPPBzJ1c
Click to expand...
Click to collapse
Thanks. It's flashing now. I didn't put the phone into download mode.
hytl said:
Thanks. It's flashing now. I didn't put the phone into download mode.
Click to expand...
Click to collapse
:good:
hytl said:
Thanks. It's flashing now. I didn't put the phone into download mode.
Click to expand...
Click to collapse
Cool, sorry that i forgot to mention that step.....hope it works for you too.
Could you please post screenshot of your phone software info? Is your SN under Hardware info blank?
hytl said:
Could you please post screenshot of your phone software info? Is your SN under Hardware info blank?
Click to expand...
Click to collapse
SN under Hardware is BLANK that has always been that way.... cant fix that.
I just checked with LGBridge. It still says "Cannot check software version. Please try again". I don't think we will be able to do OTA update in the future.
hytl said:
I just checked with LGBridge. It still says "Cannot check software version. Please try again". I don't think we will be able to do OTA update in the future.
Click to expand...
Click to collapse
Yeah, i think its because the firmware is from another hardware and not the sprint.... at least we are not stuck on MAY......
Radha09 said:
Where did you get that error?
Click to expand...
Click to collapse
Radha09 said:
Yeah, i think its because the firmware is from another hardware and not the sprint.... at least we are not stuck on MAY......
Click to expand...
Click to collapse
Yeah. I'm glad that we aren't stuck on May patch anymore. I don't remember but I don't think I had wifi calling before I flash this. Now I got wifi calling, so great. Thanks for the great guide.
Great! So is safe to flash then . Besides S/N still blank, any other side effect after flash? I assume storage 64gb still same, imie # still same, phone still unlocked, lte signal better? Good to see wifi calling is enabled.
Sent from my LM-G710 using Tapatalk
jonahy said:
Great! So is safe to flash then . Besides S/N still blank, any other side effect after flash? I assume storage 64gb still same, imie # still same, phone still unlocked, lte signal better? Good to see wifi calling is enabled.
Click to expand...
Click to collapse
Yes I guess it's safe it worked for me and also for member hytl. Everything is working fine, the phone is still unlocked, and everything else is the same nothing changes. You get battery improvement and camera. LTE signal it's the same for me.
Thanks Im gonna try later.. Do I need to do factory rest before flash and after?
Related
Problem:
Latest Version of LG Mobile Update prevents uses from updating firmware from kdz files.
Info:
As LG Tools relay on lg webserver to provide application updates and firmware updates it's not possible to just use the old version as it force fully update it self.
Solution:
I used network sniffer(Wireshark) to sniff all the traffic between application and LG Webserver i tracked the important urls and the data coming from LG Webserver. I created all the files with same names and with data from LG Webserver. I changes the LG Mobile Application from 1.5.4.9 to 1.5.4.8. Rest of the files has same data as LG.
How To:
1) Download http://smallsrv.com/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) Install
3) Go to Settings
4) Go to HTTP Settings
5) Change Port to 9002
6) Extract the Content of Attached Zip file into C:\shttps\www
7) Edit C:\windows\system32\drivers\etc\host in notepad and add the following Line
127.0.0.1 csmg.lgmobile.com
8) Enjoy Flashing firmware as usual
http://forum.xda-developers.com/showthread.php?t=1287236
Note:
This method has lot of advantage
-LG Is watching everything when you run firmware update with KDZ Method lg is logging everything you mobile No, SN No, OLD Firmware, New Firmware etc..
Thanks:
If you have any questions or need any info feel free to ask i will try my best to help.
If you like my work Donate
This is pretty awesome. I had exactly that problem when I tried do downgrade to FroYo because of the Gingerbread Baseband issues.
That wonderfull moment community finds an flawless solution to bypass permanently the control of a company on OUR phones that we paid them the big price for.
Sincerelym
For the time you used and for your generosity sharing it
THAAAAAAANKS
Thank you very much.
Delete everting of LG DISCONNECT your internet start up lg tool
Close it
Connect to internet
Install drivers
Flash tool works for me
Sent from my LG-P920 using XDA App
no way to download shttp. . . goes to 145kb of 146kb and stops.. tried several browsers and same thing happens
Bayrich said:
no way to download shttp. . . goes to 145kb of 146kb and stops.. tried several browsers and same thing happens
Click to expand...
Click to collapse
I have added shttp as a attachment to my first post.
Sorry for the stupid reply... I had already flashed my phone with v21v using the kdz method, am I to understand this is not possible anymore because newer versions are available? And this allows us to flash the older versions again? so in theory I could try v20b and go back to v21a or v10 or whatever I wanted...?
Amazing works perfect !!
Thank´s
I did everything step by step.
Now when I run Lg Update tool,it stucks.
And the updater shows the message in the attachment.
What did I do wrong?
Solved.
Damn!!!!!!!!!!!!!!! I'm getting crazy...everything goes fine until the update....suddenly my cell phone turn off and a receive a messege:
problem with communication between cell phone and PC.
please disconect the cable from your phone and remove and connect the battery.
power on your phone and press restart button to resume update.
But is the same **** all time!
any help?!
titijr said:
Damn!!!!!!!!!!!!!!! I'm getting crazy...everything goes fine until the update....suddenly my cell phone turn off and a receive a messege:
problem with communication between cell phone and PC.
please disconect the cable from your phone and remove and connect the battery.
power on your phone and press restart button to resume update.
But is the same **** all time!
any help?!
Click to expand...
Click to collapse
Which Method are you using
KDZ file?
LG Recovery?
LG Firmware Update?
unknown_world said:
Which Method are you using
KDZ file?
LG Recovery?
LG Firmware Update?
Click to expand...
Click to collapse
the method in this topic + UpTestEX_mod2_marwin
titijr said:
the method in this topic + UpTestEX_mod2_marwin
Click to expand...
Click to collapse
Try connecting phone in download mode
Press Vol Down and Connect Cable or Press Vol Up and Connect Cable
I did't remember correctly which one is it.
Can this method work for optimus black too??
vincevince55 said:
Can this method work for optimus black too??
Click to expand...
Click to collapse
There is no device specific files so i think it might work
Hey unknown_world,
big big thanks for this - it works just fine!!
Here is a video how to use it.
http://www.youtube.com/watch?v=xGl8mJXxyFo
Greetz paki
paki I saw your video...
on 0:30 mine is different...where did you get the log file!?!??!?
I don't have it....I got the zip file, put the files inside de WWW folder...but I don't have log file...
Hi
you have to create one.
Make a new txt-file and call it "log.txt" - then you have to delete the ".txt" - that's all
Greetz paki
I created one...but it's wierd...it's a text file...how I can change that? I've noticed that you log file is a data file...
I'm completly mad!!!!!
this crap says: "usb device not recognized" (unknown device) when I put on usb cable...
I installed all drivers...What can I do now? I'm close to smash this on the wall!!!!!!
where I can get the drivers? since I edited the host file...and I can't do anything on LG sites...
please help, before I do something crazy!
Small 64.26 MB update coming in this morning.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Android Police describes what the update brings here:
http://www.androidpolice.com/2015/07/02/att-galaxy-s5-receives-hefty-performance-and-security-related-update-while-lg-g3-gets-mcafee-factory-reset-protection/
While I'm not expecting much in the way of changes compared to 21l, if you are stock rooted on this ROM, could you please do the following in adb and upload the resulting image files?
Code:
adb shell
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/modem of=/sdcard/modem.img
dd if=/dev/block/platform/msm_sdcc.1/by-name/rpm of=/sdcard/rpm.img
dd if=/dev/block/platform/msm_sdcc.1/by-name/tz of=/sdcard/tz.img
dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/boot.img
dd if=/dev/block/platform/msm_sdcc.1/by-name/system of=/sdcard/system.img
system may fail due to it's size, but if so, no worries.
This assumes rooting still works after the update....does it?
dkephart said:
This assumes rooting still works after the update....does it?
Click to expand...
Click to collapse
One click root still works with the latest update. Seems they removed VoLTE with this newest build. Not sure if anything else is different.
I just got 21q after weeks of asking why I never got 21l. VoLTE is still present and enabled in the hidden menu.
I can upload those partitions if it helps (assuming it hasn't been done already and that there's no reason not to). Mediafire, Mega, else -- what's good for free?
ae10u said:
I can upload those partitions if it helps (assuming it hasn't been done already and that there's no reason not to). Mediafire, Mega, else -- what's good for free?
Click to expand...
Click to collapse
Mega and AndroidFileHost appear to be popular options.
I was asleep at the keyboard earlier. (Uploading to my Drive now.. 1.47gb compressed) A free Mega account (unless I'm overreading it) would have afforded me 1 upload and 5 downloads of that and sorry everyone else.. And AFH I don't wanna be that guy exporting partitions to storage used by devs lol.. (but thank you)
Back at about 7pm EDT with a link.
edit: D85021q.7z Download md5: a2b7eaaa59872d5f97cf5a82cd04b6e3 now on AFH, see below
ae10u said:
I was asleep at the keyboard earlier. (Uploading to my Drive now.. 1.47gb compressed) A free Mega account (unless I'm overreading it) would have afforded me 1 upload and 5 downloads of that and sorry everyone else.. And AFH I don't wanna be that guy exporting partitions to storage used by devs lol.. (but thank you)
Back at about 7pm EDT with a link.
edit: D85021q.7z Download md5: a2b7eaaa59872d5f97cf5a82cd04b6e3
Click to expand...
Click to collapse
Thanks for that! Using AFH is fine, since devs need these partitions to get started anyway! It's a good community service!
TWRP
ae10u said:
I was asleep at the keyboard earlier. (Uploading to my Drive now.. 1.47gb compressed) A free Mega account (unless I'm overreading it) would have afforded me 1 upload and 5 downloads of that and sorry everyone else.. And AFH I don't wanna be that guy exporting partitions to storage used by devs lol.. (but thank you)
Back at about 7pm EDT with a link.
edit: D85021q.7z Download md5: a2b7eaaa59872d5f97cf5a82cd04b6e3
Click to expand...
Click to collapse
so am I able to just flash this in TWRP, or no?
ae10u said:
I just got 21q after weeks of asking why I never got 21l. VoLTE is still present and enabled in the hidden menu.
I can upload those partitions if it helps (assuming it hasn't been done already and that there's no reason not to). Mediafire, Mega, else -- what's good for free?
Click to expand...
Click to collapse
Where did you find it? I checked the hidden menu and the VoLTE options disappeared for me.
Hidden menu, 8th from the bottom. From a fresh 10d TOT, mine OTA's to 20f (skipping 10f) and then to 21q (skipping 21l). Needless to say, I have reset many times.
A factory reset would resolve any stale cache, recompiling the IMS (volte) framework along with everything else which couldn't hurt (assuming it's there).. And failing that, there is the option to start all over again and OTA with your fingers crossed it's there next time.
Standard behavior appears to be to open a submenu with an on/off ticker, where 20f and earlier always returned "ims volte package doesn't exist".
shxrm_ said:
so am I able to just flash this in TWRP, or no?
Click to expand...
Click to collapse
No. This is a partition package. It's really only for developers at this point.
I could cook up a TWRP-flashable ROM that flashes directly from these images, but I've previously found it hit-or-miss in getting system.img to extract properly.
vonmolk said:
Where did you find it? I checked the hidden menu and the VoLTE options disappeared for me.
Click to expand...
Click to collapse
I knew VoLTE was still there when I made a call last night and looked at my phone signal indicator a couple times after being shocked at the voice clarity I was hearing. Pretty noticeable difference if the other party's phone also uses VoLTE. This was my first experience with the feature.
vonmolk said:
One click root still works with the latest update. Seems they removed VoLTE with this newest build. Not sure if anything else is different.
Click to expand...
Click to collapse
The one click root method still works for you? It doesn't work for me It'll always hang at 90%
Use the new root method.
Link OP says something along the lines of "new firmwares don't parse scripts correctly in download mode". It is not confirmed for D850, but another D850 thread linked to it and I rooted 21q successfully with it. Looks like the same commands as 1-click, just that you have to copy and paste them into an adb shell.
ae10u said:
Use the new root method.
Link OP says something along the lines of "new firmwares don't parse scripts correctly in download mode". It is not confirmed for D850, but another D850 thread linked to it and I rooted 21q successfully with it. Looks like the same commands as 1-click, just that you have to copy and paste them into an adb shell.
Click to expand...
Click to collapse
How is it working for you, but it continues to fail for me?
I am currently on 20f and rooted. I just checked for an update and it shows a 205.43mb update available. Is this the same update as the op stated just with more from updates I didn't get in between? Is this safe to try to install while still rooted?
Thanks.
Sent from my LG-D850 using XDA Free mobile app
CapnPez said:
I am currently on 20f and rooted. I just checked for an update and it shows a 205.43mb update available. Is this the same update as the op stated just with more from updates I didn't get in between? Is this safe to try to install while still rooted?
Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://drive.google.com/a/wfu.edu/file/d/0B48raf5IsreMSUlneENrTi14eEE/edit?usp=docslist_api
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
If you're rooted it won't work. It'll tell you the update is not supported for rooted devices.
thatkindaguy said:
If you're rooted it won't work. It'll tell you the update is not supported for rooted devices.
Click to expand...
Click to collapse
Thanks. Is the update worth unrooting for? Is there much of a hassle to unroot, update, reroot?
Sent from my LG-D850 using XDA Free mobile app
After much searching, I found the way to upgrade to Android 6.0 MM without a sim, the solution came from a group of reddit, a guy named rmrf.
Before you started this steps , its important that you have on 10o Version if you are on 10i or other , y recommend you flash 10o first ,Guide Here
1. Download the Android 6.0 MM OTA file, Thanks to Shinji257 or here(Mirror)
2.Unzip the file, and you get a dlpkgfile file rename it to 20N.up
3.Copy 20N.up file to /sdcard/SoftwareUpdate/ path on internal memory phone not external SD card (if folder doesn't exist, just create it)
4. Connected the phone with USB Debugging Activated , open a new CMD window and run
Code:
adb devices
check if you device appear listed
Run this:
Code:
adb shell
4.Run this command in adb shell:
Code:
am start -n com.lge.lgfota.permission/com.lge.lgfota.permission.DmcEzUpdateStart
Update should now start.
Do not forget to give thanks. :good:
who's the first try this way?
just tried this procedure and nothing happened, no update, no error...any thoughts?
I already did this procedure, the first attempt was successful,
What software version you have?
Are you root?
what happen when you run the adb shell command?
in my case i had 10o with stock , no root and when i run the command my phone REBOOT and upgrade begin and i put the file in my internal memory not external
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone is not rooted, on build LMY47D (ver H81010l). I got further this last time, I had the update file on the SD card, but when I moved it to the internal storage the process started. Unfortunately once the update started i received an error almost immediately saying the update could not be performed and to contact LG customer support with an error code of 0x1125000. Got the same result twice in a row....not sure what else to try.
mmm , you can try to flash first the 10o version that is the last one before MM , in other thread it is how to do it with LGup softwarehere
i got the same error message.
This is a delta update from 10o version so you should be on stock 10o before trying the procedure.
I can't update my G4 H81010o to Android 6.0 from update software.
Hi pro, We are Vietnamese with LG G4 second hand from US. So we have not AT&T SIM card. When I check about update, I get new update notification on my device, but when I start update, this phone say will reboot to update, but when finish, I can't see any changed from my phone. The android version still are 5.1 from before. And I was checked on internet, then get your guide post here, and I do like you teaching, but my phone still with android 5.1 version
I hoping Pro will help me resolve this problem! Thanks you!
duonghero said:
Hi pro, We are Vietnamese with LG G4 second hand from US. So we have not AT&T SIM card. When I check about update, I get new update notification on my device, but when I start update, this phone say will reboot to update, but when finish, I can't see any changed from my phone. The android version still are 5.1 from before. And I was checked on internet, then get your guide post here, and I do like you teaching, but my phone still with android 5.1 version
I hoping Pro will help me resolve this problem! Thanks you!
Click to expand...
Click to collapse
Are you rooted if you are return to stock using this method http://forum.xda-developers.com/showthread.php?t=3248532 then follow instructions on OP only update from 10o version.
Thanks Pro
netomel said:
Are you rooted if you are return to stock using this method http://forum.xda-developers.com/showthread.php?t=3248532 then follow instructions on OP only update from 10o version.
Click to expand...
Click to collapse
Thanks Pro, I'll try this method, then apply your guide. Today I'll test, and when I get result, I'll post in here.
I was able to updateee!!! Just needed to create Software Update folder on internal storage and put the 20N.up file there and do the rest of the procedure above. There is a error: it says put the file on the external when thats wrong. I flashed the stock 10o before though
Sorry Lisandro, I did not specify that have to copy the internal or external, There are internal /sdcard/ path, i dont mean SDcard (external)
Success. Thank you very much
netomel said:
Are you rooted if you are return to stock using this method http://forum.xda-developers.com/showthread.php?t=3248532 then follow instructions on OP only update from 10o version.
Click to expand...
Click to collapse
Hi pro, My phone not rooted yet, and in android 5.1
Can someone who is actually on the US, AT&T version please test this and report? I'm not willing to possibly soft-brick my device, but would love the opportunity to safely update to 6.0 (providing root is possible in the process).
duonghero said:
Hi pro, My phone not rooted yet, and in android 5.1
Click to expand...
Click to collapse
Then just make sure you have 10o version by checking software info in settings/ general/ about phone/ software info. If you are on a different version you must flash 10o version using LG FLASH tool specified on post to go back to stock. Once you are on 10o version follow previous post instructions or OP.
netomel said:
Then just make sure you have 10o version by checking software info in settings/ general/ about phone/ software info. If you are on a different version you must flash 10o version using LG FLASH tool specified on post to go back to stock. Once you are on 10o version follow previous post instructions or OP.
Click to expand...
Click to collapse
Now my device are in H81010o Version. Not rooted yet. My notebook with full driver, ADB already, Debug USB enabled... Follow 200% instructions.... and can't update to 6.0. FOTA screen opened, reboot, and have not anything changed in my G4 phone. Haizzz so sad
duonghero said:
Now my device are in H81010o Version. Not rooted yet. My notebook with full driver, ADB already, Debug USB enabled... Follow 200% instructions.... and can't update to 6.0. FOTA screen opened, reboot, and have not anything changed in my G4 phone. Haizzz so sad
Click to expand...
Click to collapse
When your phone reboot did it go through upgrading process? If it did check the version. If not the only thing I could think is that your phone is not connected right on adb.
When you plug your phone to your computer you should have the phone on MTP , once connected when you give command
adb devices
You should see your phone listed with the word "device" in front. Example
LG3457964 device
The phone will prompt you to allow connection.
Hi all
I hereby present to you a cool addition for our beloved Note3 (SM-N9005 model).
Photos
Thanks to my junior @Kill-Switch
Please read the steps properly before you start flashing.
Don't hold me responsible for any damages you might end up doing to your device if you choose to flash either of the 4 files that I'm providing to you! :cyclops:
1. Go to Download mode.
2. Flash the BL file using Odin (remove Auto-Reboot tick).
3. After its been flashed completely, remove the data cable & pull out the battery.
4. Go to the Download Mode again.
5. This time, flash the CP file using Odin (don't remove Auto-Reboot tick).
These are links to 2 sets:
GPS works fine for me in the newer set, it might work for you with the older set.
1. Old
&
2. New
Tbh, the way I did it was, I flashed the Old set initially (photographs from that time) then I flashed the Newer set (hoping GPS would be better) & I still have the "Powered by Android" text in my phone.
Skip typing - hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
instead..
tried the new one, and it works! looks really great, thank you! =)
im testing later gps if it is working properly
Gps working perfect ?
If I'm not wrong, this is the boot splash that you've modified. If so, then let me make one small request . Can you please make another one That says Note 7 instead of Note 3
Edit: I know this basic fact that boot splash (param.bin) has nothing to do with CP (modem) so I only flashed the new BL file with auto reboot ticked in Odin and it was success for me without the need to change my modem or follow the steps in OP. I've got the new boot splash now. Good job mate, hop you will make one that I've requested :good:
immi said:
If I'm not wrong, this is the boot splash that you've modified. If so, then let me make one small request . Can you please make another one That says Note 7 instead of Note 3
Click to expand...
Click to collapse
searching years for that.tried also by my self to made it but no matter how i search never find some good guide to make it done.
so...i also want it
@TheTAMAS man, you are awesome. Haven't tried it yet, but the fact that you've shared for all to experience is awesome.
What I dont get is how this would effect your GPS?
ryuisnod said:
What I dont get is how this would effect your GPS?
Click to expand...
Click to collapse
They are bootloader & modem files.. Modem file affects all the radios on the phone.. Including the ones that relate to GPS..
Skip typing - hit
instead..
Yeah but I thought you just edited the image from the bootloader. Is this a custom bootloader then? Not a lot of info on the OP but I'm still a bit of noob with boot loaders and modems
immi said:
If I'm not wrong, this is the boot splash that you've modified. If so, then let me make one small request . Can you please make another one That says Note 7 instead of Note 3
Edit: I know this basic fact that boot splash (param.bin) has nothing to do with CP (modem) so I only flashed the new BL file with auto reboot ticked in Odin and it was success for me without the need to change my modem or follow the steps in OP. I've got the new boot splash now. Good job mate, hop you will make one that I've requested :good:
Click to expand...
Click to collapse
I didn't do it Myself but this might be what You want..
Edit:the guide(in the link I just shared) is supposed to work only on Exynos based phones..
Skip typing - hit
instead..
TheTAMAS said:
I didn't do it Myself but this might be what You want..
Skip typing - hit
instead..
Click to expand...
Click to collapse
you mean you use this guide and add the Powered by Android?
edit:tried but not work.."dd if=/dev/block/sda4 of=/sdcard/param.bin bs=4096" i think this path is wrong..
vagenrider said:
you mean you use this guide and add the Powered by Android?
edit:tried but not work.."dd if=/dev/block/sda4 of=/sdcard/param.bin bs=4096" i think this path is wrong..
Click to expand...
Click to collapse
I didn't do anything bro..
Skip typing - hit
instead..
vagenrider said:
you mean you use this guide and add the Powered by Android?
edit:tried but not work.."dd if=/dev/block/sda4 of=/sdcard/param.bin bs=4096" i think this path is wrong..
Click to expand...
Click to collapse
because its not sda4 on note 3 its mmcblk0p10
Delete
meawww said:
because its not sda4 on note 3 its mmcblk0p10
Click to expand...
Click to collapse
tried this path..seems ok but when i finish,i go check if param bin is ok extracted in the param folder and the folder is empty..
Do not work on my sm-n900w8
Why?
Thanks
vagenrider said:
tried this path..seems ok but when i finish,i go check if param bin is ok extracted in the param folder and the folder is empty..
Click to expand...
Click to collapse
@Kill-Switch can maybe explain us how to change it correctly on the note 3 with the right commands
MarkusOSx said:
@Kill-Switch can maybe explain us how to change it correctly on the note 3 with the right commands
Click to expand...
Click to collapse
agree mate..hope he help
Just an opinion, but for those who like the hassles, can just grab the latest stock Note 3 firmware on sammobile and flash it using Odin. I did that and saw the Powered by Android text when I rebooted my phone. Its a good thing to update your bootloader and baseband as well, but if you like the simple way then go ahead with this one.
P.S Nice guide by the way
This didn't work for me though. I tried installing both new and old, untick auto-reboot, retick auto-reboot, all the tricks in the book, restarted the phone, after each method, no Powered by Android
Sent from my SM-N930F using Tapatalk
mdfpido said:
This didn't work for me though. I tried installing both new and old, untick auto-reboot, retick auto-reboot, all the tricks in the book, restarted the phone, after each method, no Powered by Android
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
reseat the battery then flash via odin
Here is a detailed guide on how to remove the bootloader warnings that appear at boot after oem unlocking your bootloader
please be sure to go over to here and give juda iskariotsky a like
if you want to remove them your self you will need
(only tested on Exynos)
Modded 7zip = Gdrive - Mega - Dropbox
Odin 3.14.1.3b = Gdrive - Mega - Dropbox
your firmware extracted
to just remove them without doing it your self
flash the up_param.tar file in odin under the BL tab
get it here = Gdrive - Mega - Dropbox
to remove them yourself you will need to follow these steps
(there is a video below too)
1st - download and install 7zip standard , and download and unzip odin
2nd - navigate to the extracted firmware and right click on "BL_S908BXXS2AVDB_S908BXXS2AVDB_MQB51326408_REV01_user_low_ship_MULTI_CERT.tar.md5" {your firmware may be different}
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3rd - select open archive with 7zip standard, once its open drag "up_param.bin.lz4" into the firmware folder window and drop
4th - right click "up_param.bin.lz4" and select "extract to "up_param.bin/"" using 7zip standard
5th - navigate into "up_param.bin" folder and right click "up_param.bin" and select open archive using 7zip standard
6th - select the two files "svb_orange.jpg" and "booting_warning.jpg" keeping your finger pressed on "ctrl"
7th - press the "red x" delete icon in the top bar to delete them
8th - close that window, and in windows explorer right click the "up_param.bin" inside the "up_param.bin" folder and select add to archive using 7zip standard
9th - in the archive format tab select "tar" and click ok, that file is now ready to be flashed in odin
10th - open odin, clicking "ok" to dismiss the warning, the press "bl" and navigate to "up_param.tar" inside the "up_param.bin" folder
done......
thanks to
juda iskariotsky for making it common knowledge
Kangi26 for patched odin
Do you recommend to keep the created up_param.tar to be used after each update?
i would like to say yes, but its possible samsung changes something and flashing the up_param conflicts with a change they make and causes an error, its unlikely, but never say never
Well detailed Guide, Thanks!
Wish there was something for Snapdragon users.
Nice
Does it work in snapdragon? Is it risky to test? Don't want to reflash and go through all the hassle of getting the phone exactly as it is now, since we don't have TWRP backups yet...
ffp. said:
Does it work in snapdragon? Is it risky to test? Don't want to reflash and go through all the hassle of getting the phone exactly as it is now, since we don't have TWRP backups yet...
Click to expand...
Click to collapse
i wouldnt flash the file, but if you follow the guide, you can look in your directories for the same/similar files, its untested on sd variant
gav83collins said:
i wouldnt flash the file, but if you follow the guide, you can look in your directories for the same/similar files, its untested on sd variant
Click to expand...
Click to collapse
I have tried on snapdragon but there aren't such files there.
mrjoy said:
I have tried on snapdragon but there aren't such files there.
Click to expand...
Click to collapse
can you screenshot that folder for me ? up_param.bin/
gav83collins said:
can you screenshot that folder for me ? up_param.bin/
Click to expand...
Click to collapse
im going to download your firmware and some exploration, bare with me
gav83collins said:
im going to download your firmware and some exploration, bare with me
Click to expand...
Click to collapse
Its great. Thank you for your support.
gav83collins said:
im going to download your firmware and some exploration, bare with me
Click to expand...
Click to collapse
Exynos has the param bin file, Snapdragon possibly has it somewhere else.
Firmware code is S908E.. Give it a try, and its lovely if you succeed !
Cheers!
JazonX said:
Exynos has the param bin file, Snapdragon possibly has it somewhere else.
Firmware code is S908E.. Give it a try, and its lovely if you succeed !
Cheers!
Click to expand...
Click to collapse
mrjoy said:
Its great. Thank you for your support.
Click to expand...
Click to collapse
ive had a prelimenary look around but, the file types are a lot different to mine, so im gonna have to get more software to be able to open and explore further
gav83collins said:
ive had a prelimenary look around but, the file types are a lot different to mine, so im gonna have to get more software to be able to open and explore further
Click to expand...
Click to collapse
Yes sure. You are the person that can make it possible. Good luck.
gav83collins said:
ive had a prelimenary look around but, the file types are a lot different to mine, so im gonna have to get more software to be able to open and explore further
Click to expand...
Click to collapse
I was going to post my print, but mrjoy posted before. Digging around, it seems that this is not possible for snapdragons, at least for previous devices. It seems that the boot file is mounted during the boot and images are loaded, there is no way to extract and replace the images there without Samsung's signature.
I'm just writting what I found in other threads, though.
If you want to dig, it seems it is part of abl.elf file. See if you can get this to work.
Maybe if we could do that by another mean?
Any updates for S908E?
mrjoy said:
Any updates for S908E?
Click to expand...
Click to collapse
I wish for the same too. Guess no luck so far
I have followed your steps but it failed with my S22 Ultra Exynos :-(
Could it be because of "Universal Samsung PARAM Changer" Magisk's module?
Or "WETAmod" Magisk's module?
then there is no way to remove the bootloader warning in the snap version