Database Info

[Tool]LG-P920 Optimus 3D (Thrill) Recovery Toolkit (only Froyo/GB)

Hi guys,
I made a little tool which you can use to install your favorite recovery-system to the LGO3D.
Here it is:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download: LG-P920_offline_Recovery-Toolkit_XDA-Edition.zip
md5: 6E3C8CEE5989302C5C333D6491E9373E
Recovery images and instructions are inside the tool.
The version is called "XDA-Edition" because the integrated help links are going directly to this thread.
All credits for the recovery images goes to their developers - LG Electronics or the Clockworkmod-Team - Thanks!!
Have fun!
Greetz paki

Thanks man..

great

doubt
hdk1984 said:
great
Click to expand...
Click to collapse
works on p920h Baseband 20A

Awesome! Thanks!
Please cross-post this to the LG Thrill Forums, it would be much appreciated!

Thanks! It's very useful and simple tool. There is a similar non-GUI tool called Recovery Manager but I can't use it (I am getting messages like "adb server is out of date. killing.../ failed to start daemon" etc). I hope that with your tool, I won't have similar problems.
If CWM is already installed, can I install/flash over it the Stock Recovery or the CWM-Touch? And later, re-flash and go back to CWM?

Hi,
I tested the tool many times before and I've never had problems with a running adb-server.
You can change the recovery sytem as often as you want by replacing the old one.
greetz paki

Hi and thanks for the quick reply. Unfortunately my O3D has a problem with your tool, like with the other similar tool (Recovery Manager).
Some time ago, I installed the CWM-Touch with another tool you've posted here, and now I want to go back to the CWM no-touch version. I just used your new tool trying to flash the CWM, and everything finishes successfully (First I get a window that says "waiting..." and then another one that says "success.. done" or something similar).
But when I reboot to the recovery, I still have the CWM-Touch version. I tried already with your tool 3 times to flash the normal CWM and 2 times the LG stock recovery and even if it says that they flashing went successfully I'm still stuck to the CWM-Touch.
Do you have any idea why my phone is stuck with the CWM-Touch? Could it be a corrupted file somewhere like the Superuser binary (I have the latest version)?

Hi,
maybe your pc-firewall is blocking "adb-win.exe" - please check this!
Please open the windows taskmanager and kill all processes like "adb.exe; adb-win.exe; adb-windows.exe".
After that you can make a new try to flash the stock-recovery.
The Version of SU doesn't matter.
The success message also appears when the operation is canceled due to connection problems.
I know that the tool is not yet perfect, but this is my first attempt at a GUI. I try to eliminate the errors in a next version.
greetz

I works!
Great!
Thanks!

Thanks again for the quick reply. The adb***.exe processes are always killed when I exit the tool and I turn my (default) Win7 firewall temporarily off during the flashing attempt.
I'm almost certain that this is not a problem of your tool but of my phone. Because the same happens when I try to flash any CWM or stock recovery with the other similar tool, the Recovery manager.

Try to reinstall the USB-driver-package - maybe there is the problem?!
http://www.mediafire.com/download.php?eec7g8dekfggwag
USB-debugging is activated?!
greetz

Thanks. Yes, the USB-debugging is on all the time.
I installed the USB-driver-package from the link that is provided when you start the recovery toolkit.
I suppose that the link in the toolkit is the same one you've posted above but I'll uninstall it, reinstall this one and try again.

Yes - it's the same file!
Please use a different USB port of your PC so that the drivers are installed from scratch.
Which Windows-system do you use?

Thanks. I'll better use not only a different USB port but a different PC as well.
All the attempts so far were done from my laptop with Windows 7. My PC has Vista and I also can try it from my second laptop with WinXP.
I'll test it and let you know. Thanks.

OK
If you are using a Windows7/Vista PC with original firewall, then I recommend you this tool. With it you can control the access of programs.
There is a free version that goes for first.
Good luck - greetz paki

YES! It worked!
I installed the LG USB-driver-package on the PC with the Vista, and the CWM no-touch version was installed successfully with the first attempt!
Thanks a lot for your help and your prompt replies!
Grüße

It's my pleasure!
greetz paki

Hello there, took notice of your application here and did a short write up for it on the XDA Portal.
here's the link:
http://www.xda-developers.com/android/tool-for-the-optimus-3d-installs-your-favorite-recovery/
I had written more, but my editor thought it prudent to edit out some of it. regardless, i hope you enjoy it!

PoorCollegeGuy said:
Hello there, took notice of your application here and did a short write up for it on the XDA Portal.....
Click to expand...
Click to collapse
Thank you very much. This is a great honor for me!
Greetz paki

My phone works poorly...

Hi. I'm having big problems with my o3d. Since i bought it it works badly.
For example, i've noticed that camera often wont work... it takes long to start..but when it finally starts...won't take pictures...just exits to home screen. Same thing is with the flash light...often won't work...
Than i reboot my phone...that helps...but for a short while..
When i'm trying to call someone it takes about 30 sec to start calling. After i press call...it shows black screen...30 sec more or less... same thing is when someone is calling me...when it starts ringing..it shows black screen..i often missed my calls because of it...it takes a lot for the call to show up on the screen.
Also it takes a long time for aplications to start.
I use to use go launcher,than i reseted my phone and instaled xperia launcher..same thing...and i used his own launcher...and it didn't work better either.
I don't have too many applications installed..
What is the problem? Hardware or software? If it's hardware i could take it to the store and exchange it for a new one.
It is so slow... i'm.going crazy.
Please help...any kind of advice is welcome
Sent from my LG-P920 using XDA

Try to flash thiaizo3d rom. Its the most stable and fast rom to me. Acidhazardrom.com iff you need root and guides.
Please press thanks button if I was helpful

axlina said:
What is the problem? Hardware or software?
Click to expand...
Click to collapse
I suppose that you still have the stock ROM? To check if your problem is hardware or software related, you cab do a factory reset/wipe (from the phone menu or from the stock recovery).
If after a complete wipe you still have the same problems, then it's most probably hardware related problem and you could send it to the LG service.

Try a full reset
I would suggest to make a complete reset, not only a factory reset (which only wipes user data). To do this, download the update software directly from LG's site and choose the "emergency recovery" option. This will download and install the lattest ROM available for your region, even if it is already installed.
This will make sure that you are running the lattest official ROM, specially if your phone was purchased used. If it is new, the procedure won't void your waranty.

Installing custom rom is not an option because i'll loose warranty.
I did factory reset...and when there's no app instaled...it works fine...but as soon as i install few apps it slows down a lot and takes a lot to open apps...
thx everyone...i'll try that emergancy recovery...
Sent from my LG-P920 using XDA

I did that few days ago..installed the latest version of the software
What's the use of a phone like this if i can't install any apps.
Is there any way to find out which app causes problems...maybe it's not all apps...could be just one app that's slowing down my phone?
Sent from my LG-P920 using XDA

axlina said:
Is there any way to find out which app causes problems...maybe it's not all apps...could be just one app that's slowing down my phone?
Click to expand...
Click to collapse
Yes, surelly. You yourself just said that the phone works fine when there are no applications installed. First, I suggest you turn off all data communication on your phone to see if data communication is your problem (3G, Wifi and bluetooth). Then, if it doesn't help, you should uninstall one application at a time to discover which one is the culprit.
I would point out that my phone, sometimes act slowly for some seconds, just like any PC, because it is running some background application that is consuming resources. As soon the app completes, the performance comes back to normal.
Finally, if the problem is as strong as you sound, then your phone probably is deffective and should be sent to service. This phone is one of the best in terms of processor performance, except in terms of RAM memory, which is relatively small in todays standards.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i tried to update my phone to the latesst version but lg update service program keeps saying that my phone isn't supported even though, everytime i start the program it says that new version of the software is avaiable. that it says it's not supported.
before the update, i've updated my drivers, using lg update service...
how can i fix this?

i have v20a
is v21e custum or stock rom? will i use warranty if i install that?
could someone post a tutorial how to install v21e..

axlina said:
i tried to update my phone to the latesst version but lg update service program keeps saying that my phone isn't supported even though, everytime i start the program it says that new version of the software is avaiable. that it says it's not supported.
before the update, i've updated my drivers, using lg update service...
how can i fix this?
Click to expand...
Click to collapse
In LGMobile Support Tool, select [Customer Support] Menu then [Recovery Phone] option. Then enter your IMEI. The program will download and install the lattest rom available for your region even if it is already installed. This is usefull to be shure you are not using a corrupted ROM.
If you want to download and install V21E if it is not available to you, download from here and then use the tutorial from the first sticky thread and read this.

i tried that, with recovery, entered my imei and it says something ... fatal error

M2 from my sister Pattern Blocked!! Help please!!

Hello !! I'm not much to put posts but... I have a huge problem... The M2 of my sister (in the hands of his little girl) has been blocked... She activated the pattern (her little 3 years old baby), and do not know what pattern is!!!... Also she activated and deactivated ALL, and is no wifi or data enabled... So i cant send an email to my sister Gmail!! I searched how to enter the recovery but it is impossible not to find anything !! How is it possible?? I want ti do a reset and stay factory... But i cant enter to the recovery...
Any little help ?? :angel:
Regards and thanks in advance !! :fingers-crossed:

Try to repair it with Sony PC Companion.

I cant!! PCC say me "need unlocked" or something, if i dont unlock the pattern, i cant connect to sony companion... (awwwwwwggg)

When you enter an incorrect pattern 5 times, you get a Forgot Pattern button where you can use your google password to unlock

H�hnergott said:
When you enter an incorrect pattern 5 times, you get a Forgot Pattern button where you can use your google password to unlock
Click to expand...
Click to collapse
Hi!! Yes i know! But i have said in my first post that i have no wifi or data activated! So i cant use the google password. All data is on SD, so i only want to "format" or "wipe data", but i cant enter recovery...

If you just want to format, wouldn't flashing a clean FTF solve it? I suppose you'll have to wait until the battery runs out for it to turn off first, though.

Crim Soukyuu said:
If you just want to format, wouldn't flashing a clean FTF solve it? I suppose you'll have to wait until the battery runs out for it to turn off first, though.
Click to expand...
Click to collapse
Hey! Sorry but i don't understand you... Frist, whats FTF? (I'm Spanish, so my English level it's only from school )
The battery ended two hours ago and phone its off, but do not understand why you mention it ...
Thanks!

You'll need flashtool and an .ftf file from here (probably customized_ES, since you're Spanish).
Charge the battery, but don't boot the phone.
Put the .ftf file to <where you installed flashtool>\firmwares
Start flashtool, click "Flash", select the ftf you downloaded
It will prepare the files, then ask you to connect phone in flash mode
Hold the volume down key and connect the USB cable (keep holding the volume down key)
The notification LED should light up green and flashtool will start flashing.
Should it not start flashing, then you're probably missing some drivers. The installation package for it is in the flashtool\drivers directory.
edit: I think this should be clear, but doing so will wipe all your data on the phone (not SD)

Crim Soukyuu said:
You'll need flashtool and an .ftf file from here (probably customized_ES, since you're Spanish).
Charge the battery, but don't boot the phone.
Put the .ftf file to <where you installed flashtool>\firmwares
Start flashtool, click "Flash", select the ftf you downloaded
It will prepare the files, then ask you to connect phone in flash mode
Hold the volume down key and connect the USB cable (keep holding the volume down key)
The notification LED should light up green and flashtool will start flashing.
Should it not start flashing, then you're probably missing some drivers. The installation package for it is in the flashtool\drivers directory.
edit: I think this should be clear, but doing so will wipe all your data on the phone (not SD)
Click to expand...
Click to collapse
Thank you very much!! I'm trying to do this right now!!

I have this problem:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It tells you what to do - install the drivers from the flashtool\drivers folder.
If you are running win8+ x64, you might have to disable driver signature enforcement in windows first.

Crim Soukyuu said:
It tells you what to do - install the drivers from the flashtool\drivers folder.
If you are running win8+ x64, you might have to disable driver signature enforcement in windows first.
Click to expand...
Click to collapse
I have Win7 64bits!! I installed now the flashboot and flashmode drivers, i can see a lot of mobile phones in the install list but M2 not appears, with this installed, i have the same error!
Edit: Ok, i changed the "cable" (i dont know why) and now its flashing!!! After flash, what i need to do?

Use the PC companion. Look for the repair option and that's it. If I'm not mistaken you'll find it on the support zone. Just follow the instructions
Sent from my LT22i using XDA Free mobile app

Actually, after flashing the ftf you should have a factory reset phone, so no further repairing should be needed.

Okay!!! All its okay now REALLY THANKS!! The only thing is the little baby of my sister bloqued SIM, so i called her operator for PUK and now it's all okey hahahaha
Another time, Really thanks!!! :laugh::laugh::laugh:

Good to hear you were able to fix it. Don't let the baby play with smartphones in the future, there are toys for that

Crim Soukyuu said:
Good to hear you were able to fix it. Don't let the baby play with smartphones in the future, there are toys for that
Click to expand...
Click to collapse
You need see her playing with "minions" from Gru game... It's incredible only with a few years!! Hahahaha but yes!! you are right!!

Under the 'flashtool' folder, there is a 'drivers' folder, with one. exe file...try installing that
Sent from my D2303 using XDA Free mobile app

manu_dk said:
I have this problem:
Click to expand...
Click to collapse
You need to install some drivers . It's very simple, install sony pc companion and run it . it will install drivers .

Thanks to all!! It's Ok now!!

[GUIDE] Fixing hard bricks [Qualcomm HS-USB QDLoader 9008]

Fixing dead L70+ devices​
EVERYTHING IN THIS GUIDE IS DANGEROUS AND CAN COMPLETELY DESTROY YOUR DEVICE IF DONE INCORRECTLY. YOU HAVE BEEN WARNED
PLEASE READ EVERYTHING​
DO NOT DO THIS IF IT'S ONLY A SOFT BRICK!!!
By following this guide you agree that I TAKE NO RESPONSIBILITY FOR BRICKED OR DAMAGED DEVICES.
You and only you decided to follow these instructions.
Click to expand...
Click to collapse
What is a dead (hard bricked) device?
A dead or "hard" bricked device is a device that has been bricked beyond repair. Usually a corrupted boot partition failing to load the kernel or any type of recovery menu in order to restore. Motherboard swap is most commonly done in order to fix such device. Some devices such as our own have "leaked" service packages that can be used to restore a hard bricked device. Beware that this is not a 100% guarantee. It might or might not work.
Click to expand...
Click to collapse
How do I know if my device is hard bricked?
It would fail to boot and enter recovery/download mode. When connected to a PC and powered on Windows will detect it as Qualcomm HS-USB QDLoader 9008.
Instructions​
Download and install drivers from here
Download BoardDiag v2.99a from here
Download TOT files from here
Unpack all archives in a new folder in the root of your C: drive. Everything including the tot file.
Remove the batter from the device
Plug the device in to the PC via the USB cable.
Place battery back
Open BoardDiag and set it up as such:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AP Chipset: W3 W5 (ms8610)
Com Port: Get port num from device manager.
Target Dir: The new folder you created in the root of C:
BIN: Select .tot file
DIR: The new folder you created in the root of C:
Click to expand...
Click to collapse
Click on the EXTRACT button and wait until it finishes.
Make sure there are ticks on AP Check and EMMC Test !
Press START and wait until the program finishes.
When done it's safe to disconnect the phone from the PC.
Pull the battery out and place it back in and try to enter Download mode. If successful you should be able to flash KDZ following this guide.
Translated and re-formatted. Original guide by @kossrap @ 4pda.
Happy flashing!

Reserved

Reserved 2

Great to have new tools with Qualcomm chipsets

The BoardDiag have no "msm8916"

hi, I tried this guide, but I could not get my lg d290n, ap test ok, EMMC ..test failed test, dsram okay, where am I wrong? someone can help me because I'm not very good?

marcello1977 said:
hi, I tried this guide, but I could not get my lg d290n, ap test ok, EMMC ..test failed test, dsram okay, where am I wrong? someone can help me because I'm not very good?
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/d290n/how-to/guide-reflashing-stock-rom-d290-d295-t3142456

I have this problem 3 months ago , but i dont found solution yet for my Samsung -SM-N910F , sorry for my bad english :/

Need help please. I can't find the COM Port of my device. It just says "QHSUSB_BULK" under other devices. Doesn't say the port number. Anyone can help?

How to flash for htc one m8 in hsush qdload 9998
Sent from my HP 7 VoiceTab using XDA Free mobile app

Please Help
This happened after I clicked the start button...
please help

im trying to fix two LG fino with this one.
both were successful but I am still unable to boot to download mode

s4h1k0 said:
im trying to fix two LG fino with this one.
both were successful but I am still unable to boot to download mode
Click to expand...
Click to collapse
If you can boot in system, you can enable developer settings, connect the phone to your pc and try "adb reboot edl"

sorry it seems that I missed some steps.
I still cant go to downlaod mode

s4h1k0 said:
sorry it seems that I missed some steps.
I still cant go to downlaod mode
Click to expand...
Click to collapse
I think you need to restore the files using restore boot img, check this guide http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359

Hi My phones Lg G Pad 10.1 LG-VK700 hard brick after me flashing rom wrong Can u help me How to fix it ? Thank for help
lamyean122gmail.com

dibowz said:
This happened after I clicked the start button...
please help
Click to expand...
Click to collapse
I'm having the same problem as yours, does anyone have a solution? thanks, need help

Is this compatible with lg l fino d290n? And if yes, why the TOT file to download has the name "LGD295V10eCIS.7z"?
Sorry for my English

Hello, this method and post files can be used for a LG L70 MS323 v10c Metro PCS, sorry for my English...

Can i use provided D295N .tot file on a D290G?

Firmware For Sony Xperia R1 PLUS g2299

Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You

sbhawani051 said:
Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You
Click to expand...
Click to collapse
You found anything? why there is no ftf file for it bro?

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
No nothing, I can't find it anywhere. Sony never released firmware for this model. But, I'm still hoping to get something

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
Found a rom but without .mbn file attached the screenshot with all the files I got. Any idea how to use these files with out using UMT_Qcfire I cen't afford it.
Also I found website which may help " https://forum.gsmhosting.com/vbb/f9...us-g2299-hang-logo-done-2619023/#post14707534"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello, to all whoever watching the comment. I want to tell that I've completely revived my Sony Xperia R1 plus G299 model using the rom I found on the website. It's working perfectly. I used the UMT for flashing the firmware. If you guys want the Rom for G299 for flashing. Message me here or write a comment. I'll provide you with firmware.

can you please provide the firmware and steps. it would be a great help!

As_373 said:
can you please provide the firmware and steps. it would be a great help!
Click to expand...
Click to collapse
Sure, I'll provide you with firmware. But I have to give you warning before you do any steps of it
After Flashing the firmware my phone have lost it's IMEI number only its Wi-Fi and Bluetooth is working.
Also this method is just for Sony Xperia R1 Plus which is hardbricked means it doesn't turns , screen shows nothing when pressed button only shows red led blinking when charging cable is used.
Note: If you don't wanna to loose it's IMEI please don't use this method.
Requirements: - Ultimate Multi Tool software, Qualcomm USB Drivers & firmware.
Steps: -
1) Please install the UMT in your system/computer. You'll need to purchase it's usb as this software is not free or you can go nearest mobile repair shop as they do have this software generally or see if your friend have one.
2) Please install Qualcomm usb drivers.
3) If your phone is hardbricked this method works on it only. So open your phone back panel reach to it's motherboard.
4) Now after reaching find Sony G299 Edl points and short them but remove battery first. After shorting both edl points keep them shorted and insert the USB cable in phone and then in your computer. (You have to keep edl point shorted until you plugged the cable)
4) In your device manage you'll see the a usb COM port will be shows (It'll be like this Qualcomm HS-USB Qloader 9008 COM and some number).
5) It means your device is not connected in EDL mode if not try repeating the step above. If it worked make sure the device name shown in device is not showing any kind on error mark in device manager like this
if it does. That means your QC Usb drivers are not good. Seek help on youtube if this happens as this error is not gonnalet us flashing the firmware.
6) Open the UMT tool and choose the flasher option on top. Next make sure its on Single program mode. Below that you have to provide patch file and Xml file. You can do that by going into firmware folder which you've downloaded. It'll automatically detect the file format you just have to select it and then after all is done hit FLASH button.
It'll flash the software in sometime and your phone will reboot after that. But from my result it'll not have it's IMEI number anymore sony IMEI repair is not easy and you'll need to visit service centre maybe.
Here the firmware: - Firmware (https://www.mediafire.com/folder/6tpen9umgcou4/SONY_G2299_S000028_171102_2017-09-01)
Let know how it worked for you.

thank you so much!