Related
This is my first time asking for help directly here, I always find the answers in the other threads solved, but this time I can not find an answer.
I have a alcatel one touch 5020t evolve its a MTK6575 (t-mobile but is used in el salvador), I used to MTKDroidTools to install CWM Revocovery, I did back up with the same program but apparently did not because i look and i cant find anything in the back up folder, only left some files called:
ALCATEL-ONE-TOUCH-5020T_130818__boot_patched_140129-175612.img
ALCATEL-ONE-TOUCH-5020T_130818__recovery_140129-175612.img
in the folder called recovery.
Now the phone on, the startup screen and then turns off, I can enter a menu by pressing on + vol +, where it says enter recovery mode or normal mode, before they tried to install cwm I could go in and delete everything from there, now I get the menu of recovery mode and normal mode but since does not enter recovery mode, got it turns off, like when entering the normal mode.
I tried to flash with sp flash tool but I get an authentication error that is on the img
The pc recognizes my phone, makes the sound when you connect something, now if we go to Device Manager, a device called first appears:
MTK USB Port
After that is disconnected and then a new one appears called :
Media Tek Preloader USB VCOM Port
But there ir a problem, then this becomes a repetitive one disconnects and connects the other, but only when I connect the phone without battery only stays in:
MTK USB Port.
Help what can i do to revive my phone ???????????????
you found any solution i have the same problem ?
:/
harold99 said:
you found any solution i have the same problem ?
Click to expand...
Click to collapse
Sorry, but i could not solve yet, nobody helps me
So were you able to flash cwm to the device? there are several threads requesting a custom recovery for this device and either way could you upload those first two .img files I may be able to use them to try to recover my device
*** Okay so the problem is that the boot loader on this device is locked and for the time being a custom recovery is not possible. I still have access to the recovery on my device so if I could find a way to build an update file from the source code or an official firmware update I could fix mine. Yours may be too far gone. sorry.
any luck with a solution? How close to one have you got to...
ipeedalil said:
*** Okay so the problem is that the boot loader on this device is locked and for the time being a custom recovery is not possible.
Click to expand...
Click to collapse
A friendly warning: Don't just mess around with the Bootloader, that's one delicate piece of software, try to find how to unlock it first, then we can talk of changing the recovery. For rooting purposes I can attest that you can safely root it using the OneClickRoot solutions around the net. I used some chinese root and it worked like a charm.
Soft Bricked 5020T
carlitox2301 said:
This is my first time asking for help directly here, I always find the answers in the other threads solved, but this time I can not find an answer.
I have a alcatel one touch 5020t evolve its a MTK6575 (t-mobile but is used in el salvador), I used to MTKDroidTools to install CWM Revocovery, I did back up with the same program but apparently did not because i look and i cant find anything in the back up folder, only left some files called:
ALCATEL-ONE-TOUCH-5020T_130818__boot_patched_140129-175612.img
ALCATEL-ONE-TOUCH-5020T_130818__recovery_140129-175612.img
in the folder called recovery.
Now the phone on, the startup screen and then turns off, I can enter a menu by pressing on + vol +, where it says enter recovery mode or normal mode, before they tried to install cwm I could go in and delete everything from there, now I get the menu of recovery mode and normal mode but since does not enter recovery mode, got it turns off, like when entering the normal mode.
I tried to flash with sp flash tool but I get an authentication error that is on the img
The pc recognizes my phone, makes the sound when you connect something, now if we go to Device Manager, a device called first appears:
MTK USB Port
After that is disconnected and then a new one appears called :
Media Tek Preloader USB VCOM Port
But there ir a problem, then this becomes a repetitive one disconnects and connects the other, but only when I connect the phone without battery only stays in:
MTK USB Port.
Help what can i do to revive my phone ???????????????
Click to expand...
Click to collapse
I have had a OT-5020T with all the same symptoms as you describe. After much research and diagnosis here is what I have learned and know to be true.
You have soft bricked your phone. For this phone it results in the boot loop you described. At present a Custom Recovery that works is not available for this phone and any attempt to flash an existing one results in a soft brick. There are apps that will flash a Custom Recovery while the phone is one but once you reboot ... !!! Bricked!! This is because ...
a) the memory mapping for this phone is different that other OT-5020 models, so the Custom Recovery placement and indexing is wrong when flashed, causing the boot-loop, and inability for Custom Recovery to load,
and ,
b) the bootloader is locked for the 5020T (different story for other OT 5020 models), and no one has found a way around it yet. Trying to flash back stock firmware for the OT-5020T requires it to be unlocked.
One Touch Update 2.8.0 doesn't seem to want to work one the phone has been altered in this way. SPtools won't work because you need an accurate OT-5020T scatter file (memory map) ,and certification file (bootloader unlocker) to flash any image. In addition to all this the phone doesn't maintain a steady usb connection long enough to allow use of android tools adb and fastboot commands although it does can stay connected in a different mode.
What I have used to restore my phones firmware is a package from Furious Gold that allows the phone to be flashed to factory firmware. I have used it successfully, so I can confirm that the phone wasn't a permanent brick.
Alcatel 5020t T-Mobile plis help flshe file
please am in need of alcatel 5020w firmware, please if someone is having it or having that same phone and want to read the firmware for me my email is [email protected]
thanks
Hi everybody how are you?
I'm in trouble with my MOTO G, I broke the button, therefore, if I may I can not turn it off
What options have root to install any app where you have the options to reboot into bootloader mode, recovery and so on?
I turn to you because I am a novice on the subject and I'm afraid of losing the phone honestly could help me with this?
Please Thank you in advance.
My phone is a MOTO G XT1032 (2013)
:good:
upppppppppppppp
upppppppppppppp
Hardweell said:
Hi everybody how are you?
I'm in trouble with my MOTO G, I broke the button, therefore, if I may I can not turn it off
What options have root to install any app where you have the options to reboot into bootloader mode, recovery and so on?
I turn to you because I am a novice on the subject and I'm afraid of losing the phone honestly could help me with this?
Please Thank you in advance.
My phone is a MOTO G XT1032 (2013)
:good:
Click to expand...
Click to collapse
Is your phone already rooted or a custom rom installed?
steve.loveday said:
Is your phone already rooted or a custom rom installed?
Click to expand...
Click to collapse
The phone has the rom 5.0.2 PERSONAL, Argentina.
It is not rooted nor has the bootloader unlocked.
Thanks for responding, Greetings
Hardweell said:
The phone has the rom 5.0.2 PERSONAL, Argentina.
It is not rooted nor has the bootloader unlocked.
Thanks for responding, Greetings
Click to expand...
Click to collapse
You have several options:
1. You can use adb from a computer: "adb reboot", "adb reboot-bootloader", "adb reboot recovery"
2. You can use a terminal app ( one is provided in CM based roms in the developer tools/ also available at the play store ) : "reboot", "reboot recovery", "reboot-bootloader"
3. There are apps in the play store that can provide you with a power menu: A quick search makes this one look pretty good:
https://play.google.com/store/apps/details?id=ru.littlevictor.powermenu
Meticulus said:
You have several options:
Click to expand...
Click to collapse
Hi, thanks for responding.
My phone is not rooted, and therefore can not use tools that provide functions reboot bootloader mode and others, there are some that does not require root access?
P/D: By ADB says 'Error: device not found'
regards
Hardweell said:
Hi, thanks for responding.
My phone is not rooted, and therefore can not use tools that provide functions reboot bootloader mode and others, there are some that does not require root access?
P/D: By ADB says 'Error: device not found'
regards
Click to expand...
Click to collapse
What is it that you want to be able to do ?
Just be able to restart op power off remotely op you want it rooted?
If it's not finding your device chances are your drivers didn't install fully put your phone into the fastboot and if your on windows look in device manager and it should show up as a exclamation mark that needs drivers.
There is a Cm universal adb driver package that could help you in the tools section.
Hello, I could solve the problem.
@steve.loveday @Meticulus
I had to disassemble the phone, remove the screws and remove the lid, with the motherboard of the phone in sight I had to play with two points the 'contact' power, and after a long time could deny enter bootloader mode, and I could unlock it, install Android 5.1 and root the phone, if I did not before because it was thought impossible, and it is very risky, aS IT MAY BREAK / SCRATCH PLATE BASE, but hey, it worked out well =)
PS: I go back to clarify this because I needed power button is broken and beyond repair, now I have from the app who recommended me normal reset, bootloader, recovery and others.
No more, thank you very much to both of you!
They can close the issue, Greetings from Argentina.
Federico
Hello everybody!
i have this device.
Device info:
Code:
android version: 5.1
baseband version: MPSS.BO.2.5.c3-00070-M8992FAAAANAZM-1.19025.1
kernel version: 3.10.49
build number: LMY47D
sw version: H81010o
security sw version: MDF v1.1 release 5
(I'm not sure it's a real H810, on the back there was a sticker and below it a hidden "H811" sign.
Furthermore, "LG Phone From" app reports a "stolen" IMEI.
How can i verify if it's a real H810?)
I successfully rooted it following this guide.
I can enter in download mode by plugging the USB cable while pressing VolumeUp button, but i can't unlock bootloader or boot in fastboot mode.
I can see the device through adb, but if i try:
Code:
adb reboot bootloader
simply the phone reboots in normal mode
I tried to install TWRP following this guide (dd Install Method), but if i try:
Code:
adb reboot recovery
the phone gives me a "security boot" error, then boots in normal mode.
After some searching, i found that i can probably force the fastboot mode by zeroing laf partition, but i haven't tried this yet.
My question is:
If i zero the recovery partition (that currently contains a non-bootable recovery) and i send a
Code:
adb reboot recovery
command, the phone should go in fastboot mode without losing the download mode, right?
Someone can give me a better idea to unlock bootloader/enable fastboot mode?
Thanks in advance
encol said:
Hello everybody!
i have this device.
Device info:
I successfully rooted it following this guide.
I can enter in download mode by plugging the USB cable while pressing VolumeUp button, but i can't unlock bootloader or boot in fastboot mode.
I can see the device through adb, but if i try:
simply the phone reboots in normal mode
I tried to install TWRP following this guide (dd Install Method), but if i try:
the phone gives me a "security boot" error, then boots in normal mode.
After some searching, i found that i can probably force the fastboot mode by zeroing laf partition, but i haven't tried this yet.
My question is:
If i zero the recovery partition (that currently contains a non-bootable recovery) and i send a command, the phone should go in fastboot mode without losing the download mode, right?
Someone can give me a better idea to unlock bootloader/enable fastboot mode?
Thanks in advance
Click to expand...
Click to collapse
You can't unlock h810!
Only h811 and h815 international.
.
Sent from my LG-H815 using XDA Labs
steadfasterX said:
You can't unlock h810!
Only h811 and h815 international
Click to expand...
Click to collapse
I updated the first post.
I suspect it's a H811
Thanks to @autoprime suggestions, i've found some additional informations:
I dumped the aboot partition, and i found this string in it with an hex editor: "gpt.model.name..LG-H810"
In the hidden menu i see "non-fusing device"
is there an undiscovered download mode in this device?
is there an undiscovered safe mode android boot into?
is thera an undiscovered "IMEI display" screen?
chepe263 said:
is there an undiscovered download mode in this device?
is there an undiscovered safe mode android boot into?
is thera an undiscovered "IMEI display" screen?
Click to expand...
Click to collapse
I don't know if you mean these, but:
I can enter download mode by power off and then holding volume up when plugging to the USB
I can boot in safe mode by holding Power Off icon
I can get IMEI by composing
Code:
#*06#
encol said:
I don't know if you mean these, but:
I can enter download mode by power off and then holding volume up when plugging to the USB
I can boot in safe mode by holding Power Off icon
I can get IMEI by composing
Code:
#*06#
Click to expand...
Click to collapse
Pressing up and down when the phone boots brings up the imei screen. Holding power + up while bootanimation starts safe mode.
-----------
What if you plug a physical keyboard with usb otg and press DELETE, F2, F9 or F12 like a computer? I know it sounds dumb but what if no one has tried and it was the solution all this time?
chepe263 said:
What if you plug a physical keyboard with usb otg and press DELETE, F2, F9 or F12 like a computer? I know it sounds dumb but what if no one has tried and it was the solution all this time?
Click to expand...
Click to collapse
I don't have a USB keyboard at the moment.
What should happen?
Have you tried this? On what device?
encol said:
I don't have a USB keyboard at the moment.
What should happen?
Have you tried this? On what device?
Click to expand...
Click to collapse
My usb keyboard is broken. I guess nothing will happen but I was imagining a computer with extra options in the bios.
You know... maybe a secret bootloader menu.
-------------------------
The keyboard has no power when the phone boots.
steadfasterX said:
You can't unlock h810!
Only h811 and h815 international.
Click to expand...
Click to collapse
So does that mean the h810 can't be rooted?
clyde54 said:
So does that mean the h810 can't be rooted?
Click to expand...
Click to collapse
Well at the time I wrote the above it was true...
Now the game has changed! Wait until the last week of January when I'm back from vacation where I start with releasing UsU (see my sig for the PoC thread)
Sent from my LG-H815 using XDA Labs
rooting my LG G4 H810
steadfasterX said:
Well at the time I wrote the above it was true...
Now the game has changed! Wait until the last week of January when I'm back from vacation where I start with releasing UsU (see my sig for the PoC thread)
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Hello,
I'm trying to root my LG G4 H810 so I can install a custom rom. I've tried following up on this comment you made about "UsU" and the "PoC" thread but I haven't been able to find anything.
Is rooting the H810 possible yet? I have Marshmallow software version 21y installed on mine.
Thank you and I'm so very sorry to hear about the passing of your dog : (
G4_PITA said:
Hello,
I'm trying to root my LG G4 H810 so I can install a custom rom. I've tried following up on this comment you made about "UsU" and the "PoC" thread but I haven't been able to find anything.
Is rooting the H810 possible yet? I have Marshmallow software version 21y installed on mine.
Thank you and I'm so very sorry to hear about the passing of your dog : (
Click to expand...
Click to collapse
thanks.. Yes he left an empty space here..
Read the state of UsU here:
https://forum.xda-developers.com/g4/general/bl-unlock-unlock-bootloader-proof-t3648288/post75504280
Sent from my LG-H815 using XDA Labs
Hey Friends,
You must have seen very good days with Lenovo P2 but when there comes a bad day when your phone stops responding to button holds and restarts. You may or may not have a clue what to do to get your phone working again just like before.
I got into this situation where only thing my phone was able to operate was a RED LED on connecting it to my laptop. Then I had to read tens of pages on XDA to find answers to all my questions. If you are in such a situation and your phone is UNLOCKED then you have come to the right place. Procedure is quite simple but remember, I am writing this guide to define complete process from blackout to complete update so follow this guide as per your needs.
I faced this situation of Total Blackout / Dead Phone (Almost) with only Red LED working and it can be very scary. So, here is the simplest procedure you can follow. I want to appreciate all those people who helped me in finding a way to boot my phone with each and everything working. Long story short, let's get this done.
Tools Required:
I am mentioning here all the Tools you will need. I will urge you to download and save these tools in case you want to unbrick your phone any time:
1. Minimal ADB and Fastboot setup for PC
2. Lenovo USB drivers v1.1.33
3. Qualcomm USB Drivers
4. Qualcomm Flash Image Loader (QFIL) v2.0.1.9 for your PC in case you have corrupted your phone's IMEI and/ or Baseband
5. Blankflash.bat in case you want to recover from total blackout (Attached)
6. Stock MM S048 Firmware for Lenovo P2 in case phone doesn't boot
7. S048_ModemTelephony.zip in case your phone boots through Stock MM S048 but SIM isn't detected and IMEI is missing. I have made a complete modem zip file for installation through recovery.
8. S251_ModemTelephony.zip in case your phone is on latest firmware and doesn't detect SIM and has lost IMEI. I have made a complete modem zip file for installation through recovery.
9. QCN file for recovering baseband version and giving you most precious network signals. (Attached)
10. WinRAR or PeaZip for uncompressing files
I will recommend you to have a specific folder for keeping all these tools in a single place.
Procedure for Unbricking:
Before going with the procedure, make sure you have downloaded all the files you need, updated Lenovo and Qualcomm drivers etc. Here is the procedure:
1. If total blackout with red LED notification when connecting to PC: Unzip blankflash.zip to a folder in C drive. Now connect your P2 to PC through USB, press volume+, volume- and power button simultaneously and double click blankflash.bat. You might have no success in your first try. Just keep trying and it will load your phone to Fastboot. Restart your phone in TWRP if installed and install a working ROM for your phone after doing a wipe. If all is good and phone works OK then great but if you have lost IMEI and baseband then it is better to reinstate your phone through first MM stock ROM S048
2. Install S048 firmware through Minimal ADB and Fastboot - use flash instructions in .txt file.
3. Wait for startup of phone. Check if fingerprint, BT, WIFI and SIM work if all work then OK.
4. If fingerprint, BT, WIFI and SIM are not working then check IMEI through dialer. Dial *#06#. If IMEI is not available then install latest TWRP through Fastboot.
5. Start P2 in TWRP recovery and install S048_ModemTelephony.zip. Restart phone to see if WIFI and SIM work.
6. If SIM is detected but not giving signals and Baseband is shown as unknown then extract 000000_0.qcn file given in .7z and restore through QFIL and restart your phone into Fastboot.
7. Now, install stock recovery of S048 firmware through Fastboot and restart your phone.
8. Use your phone like you normally do and update your P2 till firmware S251 and see if everything works including calls. Update your phone through OTA.
9. After OTA installation, stock recovery may say that update failed. Just press Back, go into Wipe user data menu and Wipe Cache only. Restart your phone which will be updated to latest version and will ask you to update to a newer version. Allow it to download the next update.
10. After installation of S251 update, install latest TWRP through Fastboot and install most recent version of LOS 16 so that your vendor partition is stable and free from any bloated files. Now, use your phone just like you want to.
If you need further clarification then ask in this thread.
Bro my phone is not unlocked can i try thz one
Ranji007 said:
Bro my phone is not unlocked can i try thz one
Click to expand...
Click to collapse
You should download S048 and use flashall.bat inside that archive to install it all. However, if you lose IMEI or baseband then you can use modem and qcn files given in this thread.
alirazaagha said:
You should download S048 and use flashall.bat inside that archive to install it all. However, if you lose IMEI or baseband then you can use modem and qcn files given in this thread.
Click to expand...
Click to collapse
Bro now i wanna use ...minimal adb ..my phone is totally bricked only red light glowing
Ranji007 said:
Bro now i wanna use ...minimal adb ..my phone is totally bricked only red light glowing
Click to expand...
Click to collapse
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
hackiee said:
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
Click to expand...
Click to collapse
Bro how to connect my phone to blank flash...can u PLZZ help
hackiee said:
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
Click to expand...
Click to collapse
Laptop is not detecting my device bro i installed all lenovo and Qualcomm drivers...any idea
Ranji007 said:
Laptop is not detecting my device bro i installed all lenovo and Qualcomm drivers...any idea
Click to expand...
Click to collapse
If red light blinks, your phone can be detected by your laptop. Check ports in device manager settings and you'll see a new port with Qualcomm 9800 series number. If that's there, try blankflash to start in fastboot. It might need some tries before startup. Be patient and keep trying till you are in fastboot.
alirazaagha said:
If red light blinks, your phone can be detected by your laptop. Check ports in device manager settings and you'll see a new port with Qualcomm 9800 series number. If that's there, try blankflash to start in fastboot. It might need some tries before startup. Be patient and keep trying till you are in fastboot.
Click to expand...
Click to collapse
Bro ..thanks for reply....in my phone red blink is glowing continuously ..but after connecting there is no change...can u say which buttons i want to press?
Ranji007 said:
Bro ..thanks for reply....in my phone red blink is glowing continuously ..but after connecting there is no change...can u say which buttons i want to press?
Click to expand...
Click to collapse
Press Volume+, Volume- and Power simultaneously and double click flashblank.bat. It might take some tries to finally install the scripts and start phone in fastboot. It took me 20+ tries to finally detect my phone through blankflash. Please, read OP completely.
alirazaagha said:
Press Volume+, Volume- and Power simultaneously and double click flashblank.bat. It might take some tries to finally install the scripts and start phone in fastboot. It took me 20+ tries to finally detect my phone through blankflash. Please, read OP completely.
Click to expand...
Click to collapse
Bro we want to connect each time removing usb cable and connect again like that ..we wanna do 20 times??
Ranji007 said:
Bro we want to connect each time removing usb cable and connect again like that ..we wanna do 20 times??
Click to expand...
Click to collapse
No. Keep USB connected. Try blankflash. If it doesn't detect phone or go ahead. Close command terminal, double click again and keep doing it till it processes the files. If it is stuck somewhere. Close terminal and try again.
alirazaagha said:
No. Keep USB connected. Try blankflash. If it doesn't detect phone or go ahead. Close command terminal, double click again and keep doing it till it processes the files. If it is stuck somewhere. Close terminal and try again.
Click to expand...
Click to collapse
Bro is there any solution ..i continuously pressed volume and power buttons connected to laptop and opening blank flash continuously for number of times ...but there was no reaction...only waiting for device is showing ? on my pc ...
Ranji007 said:
Bro is there any solution ..i continuously pressed volume and power buttons connected to laptop and opening blank flash continuously for number of times ...but there was no reaction...only waiting for device is showing ? on my pc ...
Click to expand...
Click to collapse
Check if your USB cable is alright and appropriate drivers are installed. Otherwise reinstall drivers, restart your PC and try again.
alirazaagha said:
Check if your USB cable is alright and appropriate drivers are installed. Otherwise reinstall drivers, restart your PC and try again.
Click to expand...
Click to collapse
Bro we want to change any settings in device manager ...?
Ranji007 said:
Bro we want to change any settings in device manager ...?
Click to expand...
Click to collapse
No. Just update drivers.
alirazaagha said:
No. Just update drivers.
Click to expand...
Click to collapse
Bro when u take to service center they said for u motherboard problem or something??
Ranji007 said:
Bro when u take to service center they said for u motherboard problem or something??
Click to expand...
Click to collapse
Fortunately, I never took it there.
alirazaagha said:
Fortunately, I never took it there.
Click to expand...
Click to collapse
My phone was fallen in water then i changed the display..few days after it stopped working ..and when i take to serive centre they said to change motherboard..but it's the 80% of phone price...so iam here ?..iam trying thiz method
Ranji007 said:
My phone was fallen in water then i changed the display..few days after it stopped working ..and when i take to serive centre they said to change motherboard..but it's the 80% of phone price...so iam here ..iam trying thiz method
Click to expand...
Click to collapse
I think you might have damaged some hardware. But anyway if you want to use blankflash, I have a method.
In lenovo p2 we have another mode called QDloader mode, in which we can use blankflash. For entering into this mode, it's little tricky but, can enter in one or two go.
So, here's how:
1. Switch off the mobile.
2. Press the volume up key,
3. While holding the volume up key, insert the usb cable and at the same time press the power button (this is the trick, we have to insert and hit at the same time).
And voila! :highfive: you will see black screen with only red notification led blinking.
we are into QDloader mode. Now use blankflash :good:
I am using an OPPO F9 pro , OPPO devices(at least mine) does not have fastboot mode as the manufacturers have given no access for that ,the "OEM unlocking" option under developer options is literally useless as it is basically not possible to unlock its bootloader.
My aim actually is to install a custom ROM using any of those recoveries , if anyone can help me regrading how to install any of these recoveries without unlocking the bootloader please help me if that is possible to do so without OEM unlock ,btw my device has mediatek chipset.
I have already set all other prerequisites like ADB ,drivers, USB drivers for my phone etc ; and i am able to use ADB bridge to control my device using my pc.
All i want to know that is there any way by which we can install custom recovery given that the phone does not have any "bootloader/fastboot" mode which indirectly also means that there is no OEM unlock access.
I would again like to clarify that i am 100% sure that it is impossible for most OPPO phones to enter fastboot mode ,i have tried to enter fastboot mode using ADB commands(adb reboot bootloader) and that power + volume up/down after power off ,nothing works for in my OPPO phone that allows me to use fastboot mode.
At last ,i have also asked from OPPO service ,they clearly told me that there is no bootloader in oppo devices
I AM REALLY STRESSED RIGHT NOW AS MY STOCK ROM SUCKS SO ANY HELP WOULD BE REALLY APPRECIATED.
armankang said:
I am using an OPPO F9 pro , OPPO devices(at least mine) does not have fastboot mode as the manufacturers have given no access for that ,the "OEM unlocking" option under developer options is literally useless as it is basically not possible to unlock its bootloader.
My aim actually is to install a custom ROM using any of those recoveries , if anyone can help me regrading how to install any of these recoveries without unlocking the bootloader please help me if that is possible to do so without OEM unlock ,btw my device has mediatek chipset.
I have already set all other prerequisites like ADB ,drivers, USB drivers for my phone etc ; and i am able to use ADB bridge to control my device using my pc.
All i want to know that is there any way by which we can install custom recovery given that the phone does not have any "bootloader/fastboot" mode which indirectly also means that there is no OEM unlock access.
I would again like to clarify that i am 100% sure that it is impossible for most OPPO phones to enter fastboot mode ,i have tried to enter fastboot mode using ADB commands(adb reboot bootloader) and that power + volume up/down after power off ,nothing works for in my OPPO phone that allows me to use fastboot mode.
At last ,i have also asked from OPPO service ,they clearly told me that there is no bootloader in oppo devices
I AM REALLY STRESSED RIGHT NOW AS MY STOCK ROM SUCKS SO ANY HELP WOULD BE REALLY APPRECIATED.
Click to expand...
Click to collapse
You can not flash anything custom without first unlocking the bootloader, there is no way to do this.
Yes, there are devices out there that have TWRP even though the device has a locked bootloader, it is tricky to explain but most of these devices do not truly have TWRP installed in the traditional manner. They merely use some kind of trick or code to trick the device into booting TWRP from a secondary location instead of booting stock recovery from the stock recovery partition.
how do I delete a comment?
armankang said:
I am using an OPPO F9 pro , OPPO devices(at least mine) does not have fastboot mode as the manufacturers have given no access for that ,the "OEM unlocking" option under developer options is literally useless as it is basically not possible to unlock its bootloader.
My aim actually is to install a custom ROM using any of those recoveries , if anyone can help me regrading how to install any of these recoveries without unlocking the bootloader please help me if that is possible to do so without OEM unlock ,btw my device has mediatek chipset.
I have already set all other prerequisites like ADB ,drivers, USB drivers for my phone etc ; and i am able to use ADB bridge to control my device using my pc.
All i want to know that is there any way by which we can install custom recovery given that the phone does not have any "bootloader/fastboot" mode which indirectly also means that there is no OEM unlock access.
I would again like to clarify that i am 100% sure that it is impossible for most OPPO phones to enter fastboot mode ,i have tried to enter fastboot mode using ADB commands(adb reboot bootloader) and that power + volume up/down after power off ,nothing works for in my OPPO phone that allows me to use fastboot mode.
At last ,i have also asked from OPPO service ,they clearly told me that there is no bootloader in oppo devices
I AM REALLY STRESSED RIGHT NOW AS MY STOCK ROM SUCKS SO ANY HELP WOULD BE REALLY APPRECIATED.
Click to expand...
Click to collapse
Simple answer: You can't. And if you unlock the bootloader and flash a custom recovery, DON'T TRY TO LOCK IT BACK! It will brick your phone badly.
armankang said:
I am using an OPPO F9 pro , OPPO devices(at least mine) does not have fastboot mode as the manufacturers have given no access for that ,the "OEM unlocking" option under developer options is literally useless as it is basically not possible to unlock its bootloader.
My aim actually is to install a custom ROM using any of those recoveries , if anyone can help me regrading how to install any of these recoveries without unlocking the bootloader please help me if that is possible to do so without OEM unlock ,btw my device has mediatek chipset.
I have already set all other prerequisites like ADB ,drivers, USB drivers for my phone etc ; and i am able to use ADB bridge to control my device using my pc.
All i want to know that is there any way by which we can install custom recovery given that the phone does not have any "bootloader/fastboot" mode which indirectly also means that there is no OEM unlock access.
I would again like to clarify that i am 100% sure that it is impossible for most OPPO phones to enter fastboot mode ,i have tried to enter fastboot mode using ADB commands(adb reboot bootloader) and that power + volume up/down after power off ,nothing works for in my OPPO phone that allows me to use fastboot mode.
At last ,i have also asked from OPPO service ,they clearly told me that there is no bootloader in oppo devices
I AM REALLY STRESSED RIGHT NOW AS MY STOCK ROM SUCKS SO ANY HELP WOULD BE REALLY APPRECIATED.
Click to expand...
Click to collapse
Have you tried looking at indian tutorial videos? I can't tell if that's going to work, since I have no experience with OPPO phones, but this one seems interesting.
uwucake2020 said:
how do I delete a comment?
Click to expand...
Click to collapse
Click edit and erase all text in it.
armankang said:
I am using an OPPO F9 pro , OPPO devices(at least mine) does not have fastboot mode as the manufacturers have given no access for that ,the "OEM unlocking" option under developer options is literally useless as it is basically not possible to unlock its bootloader.
My aim actually is to install a custom ROM using any of those recoveries , if anyone can help me regrading how to install any of these recoveries without unlocking the bootloader please help me if that is possible to do so without OEM unlock ,btw my device has mediatek chipset.
I have already set all other prerequisites like ADB ,drivers, USB drivers for my phone etc ; and i am able to use ADB bridge to control my device using my pc.
All i want to know that is there any way by which we can install custom recovery given that the phone does not have any "bootloader/fastboot" mode which indirectly also means that there is no OEM unlock access.
I would again like to clarify that i am 100% sure that it is impossible for most OPPO phones to enter fastboot mode ,i have tried to enter fastboot mode using ADB commands(adb reboot bootloader) and that power + volume up/down after power off ,nothing works for in my OPPO phone that allows me to use fastboot mode.
At last ,i have also asked from OPPO service ,they clearly told me that there is no bootloader in oppo devices
I AM REALLY STRESSED RIGHT NOW AS MY STOCK ROM SUCKS SO ANY HELP WOULD BE REALLY APPRECIATED.
Click to expand...
Click to collapse
U can't install orangefox recovery on a oppo device
OrangeFox Recovery Downloads
OrangeFox Recovery is one of the most popular custom recoveries in android ecosystem, with amazing additional features that are not present in other recoveries. We support a host of devices
orangefox.download
As u can see their not s single oppo device that support for oppo so you're out of luck
But u can install twrp recovery on a oppo device if you're in luck but u need to unlock bootloader
Devices
This is the Team Win website and the official home of TWRP! Here you will find the list of officially supported devices and instructions for installing TWRP on those devices.
twrp.me
ok thanks everyone of u for helping me i got to know that its not possible for my device as its not supported.
franta0 said:
Have you tried looking at indian tutorial videos? I can't tell if that's going to work, since I have no experience with OPPO phones, but this one seems interesting.
Click to expand...
Click to collapse
maybe that video works for realme devices but all the videos(only except 3 or 4 oppo phones those have fastboot mode given by manufacturer) in which they tell the way to unlock bootloader for oppo devices are fake except for those few i already told, although the process for different brand phones are quite same.
franta0 said:
Click edit and erase all text in it.
Click to expand...
Click to collapse
It says "Please enter a valid message."