Related
Hello friends,
Please find the rom files lited below for this device. From now onwards I will include the PIT files in the same thread.
Please note this is for AT & T model.
ROM : AP_R765AUCU1APJ8 Google Drive
BOOTLOADER : BL_R765AUCU1APJ8 Zippyshare
MODEM : CP_R765AUCU1APJ8_CL367188_QB5111100 Zippyshare
PIT : Zippyshare
CSC : CSC_ATT_R765AATT1APJ8 Zippyshare
Is csc is different check mine R765AATT1APJ8 mine also is att
What could happen if I flash this CSC on my S3 Classic?
Since it's a US CSC I believe this could activate SPay on other S3 models
dxzdxz1 said:
What could happen if I flash this CSC on my S3 Classic?
Since it's a US CSC I believe this could activate SPay on other S3 models
Click to expand...
Click to collapse
You will probably brick your watch since this is a firmware for LTE version
10urshin said:
You will probably brick your watch since this is a firmware for LTE version
Click to expand...
Click to collapse
Even flashing only the CSC instead of the entire ROM?
dxzdxz1 said:
Even flashing only the CSC instead of the entire ROM?
Click to expand...
Click to collapse
I have compared CSC versions with people who have Spay on their watches and found we have the same versions. I don't believe it is the CSC that activates*Spay installation. I have tried everything I can think of and nothing works.*I even tried GPS spoofing and that didn't work. It did install Spay into Gear Manager but not onto the watch.
10urshin said:
You will probably brick your watch since this is a firmware for LTE version
Click to expand...
Click to collapse
Sword Fish said:
I have compared CSC versions with people who have Spay on their watches and found we have the same versions. I don't believe it is the CSC that activates*Spay installation. I have tried everything I can think of and nothing works.*I even tried GPS spoofing and that didn't work. It did install Spay into Gear Manager but not onto the watch.
Click to expand...
Click to collapse
Me too man. I did a full dump from my watch and compared to a friend who bought his watch on US (and is able to use SPay here In Brazil) and what I found was that SW_Configuration.xml inside CSC folder was different. Everything else is the same.
I've tried to change the file but the CSC folder is RO.
dxzdxz1 said:
Even flashing only the CSC instead of the entire ROM?
Click to expand...
Click to collapse
I thought you gonna flash the whole rom, idk what would happen if you flash only the csc partition let alone if it even get pass the md5 check on netodin.
Anyone in this firmware got the "Jansky Wearable" update?
Mine did not....
tids2k said:
Hello friends,
Please find the rom files lited below for this device. From now onwards I will include the PIT files in the same thread.
Please note this is for AT & T model.
ROM : AP_R765AUCU1APJ8 Google Drive
BOOTLOADER : BL_R765AUCU1APJ8 Zippyshare
MODEM : CP_R765AUCU1APJ8_CL367188_QB5111100 Zippyshare
PIT : Zippyshare
CSC : CSC_ATT_R765AATT1APJ8 Zippyshare
Click to expand...
Click to collapse
Zippylinks are dead. Does anyone have a copy?
@tids2k
@ others too, who allready downloaded these files
Please re upload files...
Zippyshare Links are expired.
Thanx in advance.
Best Regards
I will upload them again this weekend.
There are tons of reasons to flash a phone or a tablet with a custom rom. Why would I flash my watch?
What does this rom have that the stock rom does not? It seems all that happens is Samsung Pay is disabled.
There are tons of reasons to flash a phone or a tablet with a custom rom. Why would I flash my watch?
What does this rom have that the stock rom does not? It seems all that happens is Samsung Pay is disabled.
Click to expand...
Click to collapse
:cyclops:
1.
This Firmware is outdated + Links are expired...
2.
Are you really sure you know the difference between this Firmware and "Stock"?
Why do you think here is Custom Firmware?
This is Orignal "Service" Firmware for use with ODIN...
3.
Samsung Pay...
If you read other Threads/posts...
Their are enough what disable Spay crap...
4.
NO Custom ROMs for Gear S3 available... as PROTECTED against Modification...
Only as hint for you...
Best Regards
OK that's what I figured. Thanks.
I purchased a used Sm-765A and it is reactivation locked; I'm trying to restore it to factory settings, Can someone tell me where I can find the instructions and files to restore it to factory? Thanks for any help.
P.s. I tried downloading from the zippy links on this thread but files are not there
1.
This Firmware which is NOT fully downloadable is obsolete
Latest know """""""""""""""""""public"""""""""""""""""""""""""... official Version:
Code:
R765AUCU[COLOR="Red"][B]2[/B][/COLOR]BQD4/R765AATT[B][COLOR="Red"]2[/COLOR][/B]BQD4/R765AUCU[B][COLOR="Red"]2[/COLOR][/B]BQD4
Obsolete!
Code:
R765AUCU[B][COLOR="Red"]1[/COLOR][/B]APJ8/R765AATT[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AUCU[B][COLOR="Red"]1[/COLOR][/B]APJ8
NOT try to flash... you can damage/brick your device! Thanx to Knox and Rollback Prevention...
2.
You have low chance to find Firmware...
3.
Reactivation Lock...
Look at youtube...
Few people offer "Service"... for SM-R760 and SM-R770...
BUT with SM-R765 is seems you will have NO luck...
Also no Combination Firmware for ATT and SM-R765A...
Really, you have no luck with SM-R765... we have more users with no luck:
https://forum.xda-developers.com/gear-s3/help/please-help-bricked-gear-s3-sm-r765s-t3665558
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Try to contact Seller, if he remember Samsung Account... or give him/her the watch back...
Best Regards
what does flashing with this ROM allow you to do?
Code:
R765AUCU[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AATT[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AUCU[COLOR="Red"][B]1[/B][/COLOR]APJ8
R765AUCU[COLOR="Green"][B]2[/B][/COLOR]BQD4/R765AATT[COLOR="Green"][B]2[/B][/COLOR]BQD4/R765AUCU[COLOR="Green"][B]2[/B][/COLOR]BQD4
R765AUCU1APJ8 is old and obsolete AND NOT for Flashing...
Risk to brick...
Rollback Prevention...
Software Revision is 01...
Rollback Prevention Security crap require 02...
Otherwise you have similar result like these:
https://forum.xda-developers.com/gear-s3/help/please-help-bricked-gear-s3-sm-r765s-t3665558
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Only as info.
Best Regards
Here is the link for the SM-R765A firmware: https://mega.nz/fm/l8sz2ZhY
Could anyone provide a download link for the Tmobile Sm-G920T s6: G920TUVS6FRA3 the latest firmware? Most of the ones I found require you to pay for download speeds or they make it take 5-6 hours for a 1.9GB File ! What I really need is the modem and im trying to extract it from the firmware, please and thank you in advance !
gwilly3301 said:
Could anyone provide a download link for the Tmobile Sm-G920T s6: G920TUVS6FRA3 the latest firmware? Most of the ones I found require you to pay for download speeds or they make it take 5-6 hours for a 1.9GB File ! What I really need is the modem and im trying to extract it from the firmware, please and thank you in advance !
Click to expand...
Click to collapse
Download SamFirm ( https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 ). Launch it. Where it says Model put in SM-G920T and in Region type in TMB. Select Auto and click Check Update. Once it has found the file click Download
Hope it helps
I just got my phone about a month ago, it's currently running in Android 6.0. I'm trying to update my OS through Odin but I don't know which firmware is the correct one. I don't know which of the figures I see in settings is my firmware.
Do I download any PDA for S7? Is the baseband version I see under software info my firmware? Or is it the build number?
I'm so lost. Please help me out, guys.
My phone model number is SM-G930F
Baseband Version: G930FXXU1APDA
Since the G930F is international the firmware is pretty much the same other than carrier changes.
If you go to updato.com or sammobile.com and enter in the model (SM-G930F) and filter by your country and carrier, you'll have all the firmware for your device by release date. But if you really wanted to you could use another country and carrier without issue.
They should also have flash guides for Odin on the site.
Download app called Phone Info *Samsung* and give us screenshots from Software card. We will know for sure.
Cholek3 said:
Download app called Phone Info *Samsung* and give us screenshots from Software card. We will know for sure.
Click to expand...
Click to collapse
For some weird reasons, I can't upload the screenshot.
But here's what I see.
Firmware and Active CSC code are both XSG
CSC Country is Korea. There are no product CSC and original CSC infos available.
Under firmware tab:
Bootloader version is G930LKLU1APDA
PDA Version is G930FXXU1APDA
CSC Version is G930LLUC1APDA
Baseband version is G930LKLU1DPLP
If there's any other info you'd like me to add, please let me know. Thanks, by the way.
Beanvee7 said:
Since the G930F is international the firmware is pretty much the same other than carrier changes.
If you go to updato.com or sammobile.com and enter in the model (SM-G930F) and filter by your country and carrier, you'll have all the firmware for your device by release date. But if you really wanted to you could use another country and carrier without issue.
They should also have flash guides for Odin on the site.
Click to expand...
Click to collapse
Oh! so basically I can download any PDA I see for G930F and they wouldn't be any issue but there would only be an issue when I download G930V or G930A for my phone, right? Am I correct?
This is all mixed up. You cannot determine what what it is.
Best thing to do now, is to go to download mode and see what model is displayed there.
Cholek3 said:
This is all mixed up. You cannot determine what what it is.
Best thing to do now, is to go to download mode and see what model is displayed there.
Click to expand...
Click to collapse
Still the same thing as I listed up there.
Tell us exactly what it says in download mode. Not much to type.
0lamide said:
Oh! so basically I can download any PDA I see for G930F and they wouldn't be any issue but there would only be an issue when I download G930V or G930A for my phone, right? Am I correct?
Click to expand...
Click to collapse
Pretty much, it's still best to flash for your country / carrier as things like VoLTE, OTA updates, and carrier bands vary in firmware versions.
Beanvee7 said:
Pretty much, it's still best to flash for your country / carrier as things like VoLTE, OTA updates, and carrier bands vary in firmware versions.
Click to expand...
Click to collapse
Thanks.
Cholek3 said:
This is all mixed up. You cannot determine what what it is.
Best thing to do now, is to go to download mode and see what model is displayed there.
Click to expand...
Click to collapse
Hiya! So I went away for some time and I'm back again.
I tried booting into download mode but all I see is written Korean with a bit triangle. Is that normal?
0lamide said:
Hiya! So I went away for some time and I'm back again.
I tried booting into download mode but all I see is written Korean with a bit triangle. Is that normal?
Click to expand...
Click to collapse
From your description it sounds like you have a clone of S7. Can you upload photo?
Cholek3 said:
From your description it sounds like you have a clone of S7. Can you upload photo?
Click to expand...
Click to collapse
A photo of the download mode or the phone itself?
0lamide said:
A photo of the download mode or the phone itself?
Click to expand...
Click to collapse
Download mode.
Cholek3 said:
Download mode.
Click to expand...
Click to collapse
I have been trying to upload the pictures on here but I can because I haven't made up 10 posts
0lamide said:
I have been trying to upload the pictures on here but I can because I haven't made up 10 posts
Click to expand...
Click to collapse
001.
Cholek3 said:
001.
Click to expand...
Click to collapse
huh? What's 001? I'm lost
0lamide said:
huh? What's 001? I'm lost
Click to expand...
Click to collapse
One more post and you can upload photo.
Cholek3 said:
One more post and you can upload photo.
Click to expand...
Click to collapse
I have already attached the image.
You have G930L version, not F. So you need to download L firmware. Where are you from?
How to change S9/S9+ CSC (Only Same Model Number's CSC)
Hi I will tell you how to change S9/S9+ CSC simple.
You can change to the same Model Number's CSC.
You don't need a special UART Cable.
It's simple to changing using RealTerm or PuTTY with any Type-C cable.
(I recommend Samsung's bundle cable in the phone box.)
Install Smart Switch and RealTerm or PuTTY.
I will tell you using RealTerm.
And you will need SamFirm to download Stock Firmware.
1. Find Your Model's Combination File by yourself!
And Flash by Odin.
2. If your phone shows your Model Number after boot.
Run RealTerm and go to Port tab.
Set Baud to 230400 and Select Port to ssudmdm0000 or very similar name.
3. Go to Send tab.
Enter "AT" and click Send ASCII.
If you get a response like
+USB READY
BOOTING COMPLETED
AT
or
AT
or
OK
or
BOOTING COMPLETED
AT
Proceed to the next number.
If you didn't get a response click +CR and send again.
If you get a response like "ERROR" proceed to the next number.
Still if you didn't get a response check your phone status and cable status.
If everything is normal proceed to the next number.
If still you didn't get a response it mean's your phone or cable is not normal status.
4. Enter "AT+PRECONFG=1,0" and click Send ASCII.
You will get this response.
AT+PRECONFIG=1,0+PRECONFG:1,???
OK
??? is your current CSC.
5. Enter "AT+PRECONFG=2,???" and click Send ASCII.
Enter ??? you want to change to another CSC.
You will get this response.
AT+PRECONFG=2,???+PRECONFG:2,OK
OK
??? is your changed CSC.
6. Enter "AT+PRECONFG=1,0" and click Send ASCII.
You will get this response.
AT+PRECONFIG=1,0+PRECONFG:1,???
OK
??? is your changed, current CSC.
7. Flash Changed CSC's Stock Firmware.
Congratulations!
You changed CSC for free by yourself!
Special Thanks to "HD Voice"
(He finded this method even without having a S9/S9+. Just a normal Korean User LOL)
"???" enter SPR or VZW ..ct?
when i enter "AT + PRECONFG = 1,0 ",
displayed"AT + PRECONFG = 1,0 " no displayed what you said
Lee1315 said:
"???" enter SPR or VZW ..ct?
Click to expand...
Click to collapse
Yes enter you want to change.
Lee1315 said:
when i enter "AT + PRECONFG = 1,0 ",
displayed"AT + PRECONFG = 1,0 " no displayed what you said
Click to expand...
Click to collapse
Did you flashed Combination firmware?
will this work on exynos note 9?
wire.rat said:
will this work on exynos note 9?
Click to expand...
Click to collapse
Yes.
Just need to flash the combination file directly? no need to flash home_csc together right
Hi applypay,
Thank you! I tried this on my S9 Exynos G960F/DS, Taiwan (BRI) stock.
However the Combination Rom must be installed first, otherwise "AT+PRECONFG" command will return nothing.
Once "AT+PRECONFG=2,???" is done, then install whatever local Rom to use, and for me it worked.
wire.rat said:
Just need to flash the combination file directly? no need to flash home_csc together right
Click to expand...
Click to collapse
Yes.
chua said:
Hi applypay,
Thank you! I tried this on my S9 Exynos G960F/DS, Taiwan (BRI) stock.
However the Combination Rom must be installed first, otherwise "AT+PRECONFG" command will return nothing.
Once "AT+PRECONFG=2,???" is done, then install whatever local Rom to use, and for me it worked.
Click to expand...
Click to collapse
Good!
applepay said:
Did you flashed Combination firmware?
Click to expand...
Click to collapse
I used odin the firmware a few days ago .You meant flash the firmware ,once the phone reboot,do these immediately?
applepay said:
Did you flashed Combination firmware?
Click to expand...
Click to collapse
It work ,thank a lot ,I just misunderstanded what you said because I 'm weak in English.I use Google Translate ,so meet trouble .
thank again.
I can't find combination file for my model
it's
Model : SM-G965F/DS
PDA: G965FXXU2BRJ1
Lee1315 said:
I used odin the firmware a few days ago .You meant flash the firmware ,once the phone reboot,do these immediately?
Click to expand...
Click to collapse
Yes.
Splinterissou said:
I can't find combination file for my model
it's
Model : SM-G965F/DS
PDA: G965FXXU2BRJ1
Click to expand...
Click to collapse
Here.
https://shell.boxwares.com/Download.aspx?L=8078
what is the method for device with single CSC firmware?
I used to extract sec_csc.zip or sec_omc.zip from a different phone and then flash from recovery.
Matvei27 said:
what is the method for device with single CSC firmware?
I used to extract sec_csc.zip or sec_omc.zip from a different phone and then flash from recovery.
Click to expand...
Click to collapse
It's simple.
Just flash on Odin.
Matvei27 said:
what is the method for device with single CSC firmware?
I used to extract sec_csc.zip or sec_omc.zip from a different phone and then flash from recovery.
Click to expand...
Click to collapse
It's simple Just flash on Odin
Not possible. I have CHC only phone and want to change to TGY. Only firmware available is CHC. I used to take sec_csc.zip from a totally different phone and flash, but it seems like csc are no longer flashable?
SM-W2018 used sec_csc.zip so I took tgy zip from S7 edge and flashed in stock recovery . W2019 has ODM partition, not a zip, so I don't know how to flash another phone's CSC
I was wondering if we can flash T-mobile firmware on note 10+ unlock version.
I remember 8 series it was doable without any issue. Anyone had this done so far ?
I loaded TMO on my unlocked Note 10+ . no issues for me.
Where did you downloaded tmobile firmware? Can u see video call features?
gotojanoo said:
I was wondering if we can flash T-mobile firmware on note 10+ unlock version.
I remember 8 series it was doable without any issue. Anyone had this done so far ?
Click to expand...
Click to collapse
I flashed T-Mobile firmware on my Note10, the day I got my phone on the 21st
SamFirm, its an app that I use on my PC
Video call, Advanced messaging, VoLTE and WiFi calling work
gotojanoo said:
Where did you downloaded tmobile firmware? Can u see video call features?
Click to expand...
Click to collapse
I got mine from Sammobile but it is also posted in other forum here:
https://forum.xda-developers.com/galaxy-note-10/how-to/n970u-n970u1-firmware-links-t3957705
Charkatak said:
I flashed T-Mobile firmware on my Note10, the day I got my phone on the 21st
SamFirm, its an app that I use on my PC
Video call, Advanced messaging, VoLTE and WiFi calling work
Click to expand...
Click to collapse
flashing t mobile firmware delete all current data on phone?
gotojanoo said:
flashing t mobile firmware delete all current data on phone?
Click to expand...
Click to collapse
If you use home csc file during flashing, it shouldn't delete data. I personally use regular csc file which resets the phone. Since you are flashing a bit different firmware I would suggest you to use regular CSC file so it would wipe the device. Use Samsung backup from your phone, to back everything up, including homescreen, your settings, your apps and so on
Charkatak said:
If you use home csc file during flashing, it shouldn't delete data. I personally use regular csc file which resets the phone. Since you are flashing a bit different firmware I would suggest you to use regular CSC file so it would wipe the device. Use Samsung backup from your phone, to back everything up, including homescreen, your settings, your apps and so on
Click to expand...
Click to collapse
I was referring to post someone posted above there is U1(unlock) and U (All other variant) . Is there any T Mobile specific firmware which says TMB or something like that?
gotojanoo said:
I was referring to post someone posted above there is U1(unlock) and U (All other variant) . Is there any T Mobile specific firmware which says TMB or something like that?
Click to expand...
Click to collapse
US Unlocked models are U1(XAA code) and carrier versions are U.
So T-Mobile version of Note10 (regular) would be: SM-N970U and CSC(or the region code) is TMB, that is what you could type in the search fields of SamFirm
Charkatak said:
US Unlocked models are U1(XAA code) and carrier versions are U.
So T-Mobile version of Note10 (regular) would be: SM-N970U and CSC(or the region code) is TMB, that is what you could type in the search fields of SamFirm
Click to expand...
Click to collapse
Gotcha thanks a lot. Downloading those 2 files . I don't see US listed in counties lol.
gotojanoo said:
Gotcha thanks a lot. Downloading those 2 files .
Click to expand...
Click to collapse
2 files? You need full firmware which will have BL, AP, CP, CSC and USER DATA files
Charkatak said:
2 files? You need full firmware which will have BL, AP, CP, CSC and USER DATA files
Click to expand...
Click to collapse
I dont see that US TMB file listed on sam mobile
Never mind. I found through different search.
gotojanoo said:
I dont see that US TMB file listed on sam mobile
Click to expand...
Click to collapse
I have attached SamFirm app for your PC. Open it and type in the model # such as SM-N975U and region which in your case would be TMB and make sure "Auto" is checked, then hit search. I have also attached screenshot how your search term should look like for your Note10+
To make sure, your phone is US unlocked Note10+?
Charkatak said:
I have attached SamFirm app for your PC. Open it and type in the model # such as SM-N975U and region which in your case would be TMB and make sure "Auto" is checked, then hit search. I have also attached screenshot how your search term should look like for your Note10+
To make sure, your phone is US unlocked Note10+?
Click to expand...
Click to collapse
Yes US unlock note 10 plus
gotojanoo said:
Yes US unlock note 10 plus
Click to expand...
Click to collapse
Great. So use the app and screenshot I provided and hope you do have the rest of instructions...
Charkatak said:
Great. So use the app and screenshot I provided and hope you do have the rest of instructions...
Click to expand...
Click to collapse
Downloading now and its way faster than sam website. Thanks bud.
Does this looks okay from sam mobile?
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
gotojanoo said:
Downloading now and its way faster than sam website. Thanks bud.
Does this looks okay from sam mobile?
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Click to expand...
Click to collapse
Yeah, after that you would use Odin to flash these files. Your list didn't include USERDATA file. So total should be 5 files when you flash it. I have attached Odin, just unzip where you like
Charkatak said:
Yeah, after that you would use Odin to flash these files. Your list didn't include USERDATA file. So total should be 5 files when you flash it. I have attached Odin, just unzip where you like
Click to expand...
Click to collapse
This is what I got those red mark are right? i need to fresh start so I wont use Home CSC as u advise.
gotojanoo said:
This is what I got those red mark are right? i need to fresh start so I wont use Home CSC as u advise.
Click to expand...
Click to collapse
If you haven't done it already. - On your phone go to settings>accounts and backup>backup and restore, then do back up
After that is done, turn off your phone. Then press and hold Vol up and down + power button. Release power when you see Samsung Note10... wording on screen. The download mode will ask you if you want to continue, use Vol up to continue
Now into Odin app, you will place each file into the corresponding spot: BL, AP, CP, CSC and USERDATA.
The last step is connect your phone to your PC and in the Odin app you will see under ID: COM(will turn blue)
Now if you are ready, start it If successful, Odin will say pass, I think
Charkatak said:
If you haven't done it already. - On your phone go to settings>accounts and backup>backup and restore, then do back up
After that is done, turn off your phone. Then press and hold Vol up and down + power button. Release power when you see Samsung Note10... wording on screen. The download mode will ask you if you want to continue, use Vol up to continue
Now into Odin app, you will place each file into the corresponding spot: BL, AP, CP, CSC and USERDATA.
The last step is connect your phone to your PC and in the Odin app you will see under ID: COM(will turn blue)
Now if you are ready, start it If successful, Odin will say pass, I think
Click to expand...
Click to collapse
Its successful. Thanks a lot Bud. Really appreciate. T mobile logo popped up after restart.