Could anyone provide a download link for the Tmobile Sm-G920T s6: G920TUVS6FRA3 the latest firmware? Most of the ones I found require you to pay for download speeds or they make it take 5-6 hours for a 1.9GB File ! What I really need is the modem and im trying to extract it from the firmware, please and thank you in advance !
gwilly3301 said:
Could anyone provide a download link for the Tmobile Sm-G920T s6: G920TUVS6FRA3 the latest firmware? Most of the ones I found require you to pay for download speeds or they make it take 5-6 hours for a 1.9GB File ! What I really need is the modem and im trying to extract it from the firmware, please and thank you in advance !
Click to expand...
Click to collapse
Download SamFirm ( https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 ). Launch it. Where it says Model put in SM-G920T and in Region type in TMB. Select Auto and click Check Update. Once it has found the file click Download
Hope it helps
Related
Hello friends,
Please find the rom files lited below for this device. From now onwards I will include the PIT files in the same thread.
Please note this is for AT & T model.
ROM : AP_R765AUCU1APJ8 Google Drive
BOOTLOADER : BL_R765AUCU1APJ8 Zippyshare
MODEM : CP_R765AUCU1APJ8_CL367188_QB5111100 Zippyshare
PIT : Zippyshare
CSC : CSC_ATT_R765AATT1APJ8 Zippyshare
Is csc is different check mine R765AATT1APJ8 mine also is att
What could happen if I flash this CSC on my S3 Classic?
Since it's a US CSC I believe this could activate SPay on other S3 models
dxzdxz1 said:
What could happen if I flash this CSC on my S3 Classic?
Since it's a US CSC I believe this could activate SPay on other S3 models
Click to expand...
Click to collapse
You will probably brick your watch since this is a firmware for LTE version
10urshin said:
You will probably brick your watch since this is a firmware for LTE version
Click to expand...
Click to collapse
Even flashing only the CSC instead of the entire ROM?
dxzdxz1 said:
Even flashing only the CSC instead of the entire ROM?
Click to expand...
Click to collapse
I have compared CSC versions with people who have Spay on their watches and found we have the same versions. I don't believe it is the CSC that activates*Spay installation. I have tried everything I can think of and nothing works.*I even tried GPS spoofing and that didn't work. It did install Spay into Gear Manager but not onto the watch.
10urshin said:
You will probably brick your watch since this is a firmware for LTE version
Click to expand...
Click to collapse
Sword Fish said:
I have compared CSC versions with people who have Spay on their watches and found we have the same versions. I don't believe it is the CSC that activates*Spay installation. I have tried everything I can think of and nothing works.*I even tried GPS spoofing and that didn't work. It did install Spay into Gear Manager but not onto the watch.
Click to expand...
Click to collapse
Me too man. I did a full dump from my watch and compared to a friend who bought his watch on US (and is able to use SPay here In Brazil) and what I found was that SW_Configuration.xml inside CSC folder was different. Everything else is the same.
I've tried to change the file but the CSC folder is RO.
dxzdxz1 said:
Even flashing only the CSC instead of the entire ROM?
Click to expand...
Click to collapse
I thought you gonna flash the whole rom, idk what would happen if you flash only the csc partition let alone if it even get pass the md5 check on netodin.
Anyone in this firmware got the "Jansky Wearable" update?
Mine did not....
tids2k said:
Hello friends,
Please find the rom files lited below for this device. From now onwards I will include the PIT files in the same thread.
Please note this is for AT & T model.
ROM : AP_R765AUCU1APJ8 Google Drive
BOOTLOADER : BL_R765AUCU1APJ8 Zippyshare
MODEM : CP_R765AUCU1APJ8_CL367188_QB5111100 Zippyshare
PIT : Zippyshare
CSC : CSC_ATT_R765AATT1APJ8 Zippyshare
Click to expand...
Click to collapse
Zippylinks are dead. Does anyone have a copy?
@tids2k
@ others too, who allready downloaded these files
Please re upload files...
Zippyshare Links are expired.
Thanx in advance.
Best Regards
I will upload them again this weekend.
There are tons of reasons to flash a phone or a tablet with a custom rom. Why would I flash my watch?
What does this rom have that the stock rom does not? It seems all that happens is Samsung Pay is disabled.
There are tons of reasons to flash a phone or a tablet with a custom rom. Why would I flash my watch?
What does this rom have that the stock rom does not? It seems all that happens is Samsung Pay is disabled.
Click to expand...
Click to collapse
:cyclops:
1.
This Firmware is outdated + Links are expired...
2.
Are you really sure you know the difference between this Firmware and "Stock"?
Why do you think here is Custom Firmware?
This is Orignal "Service" Firmware for use with ODIN...
3.
Samsung Pay...
If you read other Threads/posts...
Their are enough what disable Spay crap...
4.
NO Custom ROMs for Gear S3 available... as PROTECTED against Modification...
Only as hint for you...
Best Regards
OK that's what I figured. Thanks.
I purchased a used Sm-765A and it is reactivation locked; I'm trying to restore it to factory settings, Can someone tell me where I can find the instructions and files to restore it to factory? Thanks for any help.
P.s. I tried downloading from the zippy links on this thread but files are not there
1.
This Firmware which is NOT fully downloadable is obsolete
Latest know """""""""""""""""""public"""""""""""""""""""""""""... official Version:
Code:
R765AUCU[COLOR="Red"][B]2[/B][/COLOR]BQD4/R765AATT[B][COLOR="Red"]2[/COLOR][/B]BQD4/R765AUCU[B][COLOR="Red"]2[/COLOR][/B]BQD4
Obsolete!
Code:
R765AUCU[B][COLOR="Red"]1[/COLOR][/B]APJ8/R765AATT[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AUCU[B][COLOR="Red"]1[/COLOR][/B]APJ8
NOT try to flash... you can damage/brick your device! Thanx to Knox and Rollback Prevention...
2.
You have low chance to find Firmware...
3.
Reactivation Lock...
Look at youtube...
Few people offer "Service"... for SM-R760 and SM-R770...
BUT with SM-R765 is seems you will have NO luck...
Also no Combination Firmware for ATT and SM-R765A...
Really, you have no luck with SM-R765... we have more users with no luck:
https://forum.xda-developers.com/gear-s3/help/please-help-bricked-gear-s3-sm-r765s-t3665558
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Try to contact Seller, if he remember Samsung Account... or give him/her the watch back...
Best Regards
what does flashing with this ROM allow you to do?
Code:
R765AUCU[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AATT[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AUCU[COLOR="Red"][B]1[/B][/COLOR]APJ8
R765AUCU[COLOR="Green"][B]2[/B][/COLOR]BQD4/R765AATT[COLOR="Green"][B]2[/B][/COLOR]BQD4/R765AUCU[COLOR="Green"][B]2[/B][/COLOR]BQD4
R765AUCU1APJ8 is old and obsolete AND NOT for Flashing...
Risk to brick...
Rollback Prevention...
Software Revision is 01...
Rollback Prevention Security crap require 02...
Otherwise you have similar result like these:
https://forum.xda-developers.com/gear-s3/help/please-help-bricked-gear-s3-sm-r765s-t3665558
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Only as info.
Best Regards
Here is the link for the SM-R765A firmware: https://mega.nz/fm/l8sz2ZhY
Hello everyone,
I am looking for the stock files for Xfinity Mobile. I can't seem to find them anywhere. I'm assuming because they are a new company no one has them really posted. The Only files I see are "no boatware" versions, but I actually need the true "xfinity" Version. Of course I have check Sam's and other sites, but they all have the incorrect information. By any chance can someone send me the correct firmware? (pulled Directly from your own device)
Thanks for any help
xutmc said:
Hello everyone,
I am looking for the stock files for Xfinity Mobile. I can't seem to find them anywhere. I'm assuming because they are a new company no one has them really posted. The Only files I see are "no boatware" versions, but I actually need the true "xfinity" Version. Of course I have check Sam's and other sites, but they all have the incorrect information. By any chance can someone send me the correct firmware? (pulled Directly from your own device)
Thanks for any help
Click to expand...
Click to collapse
Using the SM-G955U model number and the CCT CSC gives the following results:
G955USQU1AQEH/G955UOYN1AQEH/G955USQU1AQEH/G955USQU1AQEH
So there is a firmware available, use SamFirm to download it and flash using Odin.
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
See this guide on carrier switching and whatnot for the SD835 S8+.
murtaza02 said:
Using the SM-G955U model number and the CCT CSC gives the following results:
G955USQU1AQEH/G955UOYN1AQEH/G955USQU1AQEH/G955USQU1AQEH
So there is a firmware available, use SamFirm to download it and flash using Odin.
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
See this guide on carrier switching and whatnot for the SD835 S8+.
Click to expand...
Click to collapse
Can you link the firmware itself? I can't find it.
stevebnes said:
Can you link the firmware itself? I can't find it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Download SamFirm.
Enter SM-G955U model number and 'CCT' as the CSC, it'll take a few seconds to check and then present you with the firmware details and the download button. It'll save somewhere on your PC, extract it, follow the guide I linked above and you can have the CCT firmware on your phone.
The fw.updato.com site has it, but it's being glitchy right now, so it isn't giving me a direct link. Use SamFirm anyway, it's faster and its much easier to find the latest firmware.
murtaza02 said:
Using the SM-G955U model number and the CCT CSC gives the following results:
G955USQU1AQEH/G955UOYN1AQEH/G955USQU1AQEH/G955USQU1AQEH
So there is a firmware available, use SamFirm to download it and flash using Odin.
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
See this guide on carrier switching and whatnot for the SD835 S8+.
Click to expand...
Click to collapse
murtaza02 said:
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Download SamFirm.
Enter SM-G955U model number and 'CCT' as the CSC, it'll take a few seconds to check and then present you with the firmware details and the download button. It'll save somewhere on your PC, extract it, follow the guide I linked above and you can have the CCT firmware on your phone.
The fw.updato.com site has it, but it's being glitchy right now, so it isn't giving me a direct link. Use SamFirm anyway, it's faster and its much easier to find the latest firmware.
Click to expand...
Click to collapse
Found it, thank you! Thought you meant sammobile for some reason but I was able to download the firmware and everything much appreciated.
stevebnes said:
Found it, thank you! Thought you meant sammobile for some reason but I was able to download the firmware and everything much appreciated.
Click to expand...
Click to collapse
Cheers.
I have a SM-G950U1 and I am trying to get a new XFinity Sim card to work (it does not connect to data right now). I tried using ODIN to install new firmware but that did not help. I just noticed, however, that the firmware for the SM-G950U model allows you to select the provider, but the SM-G950U1 firmware does not. Could this be a problem? I can't find firmware for SM-G950U1 for Comcast. Should I try installing the firmware for the incorrect model ( SM-G950U) so I can specify the carrier?
My note 8 (SM-N950U) failed during a firmware flash and now i cant initiate a stock version for some reason and my recover menu isnt showing at all, it says in download mode my carrier is SPR i need help getting my phone back i working order, it is also a USA version, i need step by step help, Please ill love you forever!
HylianJ said:
My note 8 (SM-N950U) failed during a firmware flash and now i cant initiate a stock version for some reason and my recover menu isnt showing at all, it says in download mode my carrier is SPR i need help getting my phone back i working order, it is also a USA version, i need step by step help, Please ill love you forever!
Click to expand...
Click to collapse
Just download the right firmware from sammobile.com and flash it using odin ap mode. Correct country code and carrier firmware. It will work.
bunnyy said:
Just download the right firmware from sammobile.com and flash it using odin ap mode. Correct country code and carrier firmware. It will work.
Click to expand...
Click to collapse
I tried using sammobile and everytime i try to download from the site it always logs me out
HylianJ said:
I tried using sammobile and everytime i try to download from the site it always logs me out
Click to expand...
Click to collapse
Try theunlockr.com or you can create account and download.
You can try a vpn too.
bunnyy said:
Try theunlockr.com or you can create account and download.
You can try a vpn too.
Click to expand...
Click to collapse
What kind of vpn would help me unbrick a note 8?
HylianJ said:
What kind of vpn would help me unbrick a note 8?
Click to expand...
Click to collapse
Vpn would help you download the file from sammobile.
Hi to all, I just got an A8 single sim Vodafone, I would like to flash my device to install the Italian stock firmware (no brand) , is that possible? Can you please suggest me a guide to do that? Thanks a lot
lupigno said:
Hi to all, I just got an A8 single sim Vodafone, I would like to flash my device to install the Italian stock firmware (no brand) , is that possible? Can you please suggest me a guide to do that? Thanks a lot
Click to expand...
Click to collapse
Yes it is possible, I don't know why you would want to do that, but basically download a italy firmware from either samfirm, updato, or sammobile
If you don't wanna download an external app I recommend updato
If you want faster servers and stuff and you don't mind downloading an external app, then I recommend samfirm
And then flash the items in the zip with Odin with their own spots listed like ap goes with ap, etc
Hi 587.saboor and thanks for your answer
So I can just flash and upload the stock firmware via odin
What release should I choose, the last one, or an older one and then update at last version via Ota?
lupigno said:
Hi 587.saboor and thanks for your answer
So I can just flash and upload the stock firmware via odin
What release should I choose, the last one, or an older one and then update at last version via Ota?
Click to expand...
Click to collapse
Latest
My At&T s7 currently has this baseband g930aucubctb1. I previously had a s7 edge and was able to flash phone with a g935u baseband. It unbranded phone, it enabled wifi calling, caller id that is native to t mobile, I think so anyway. can I do that with my current s7?
mikewv100 said:
My At&T s7 currently has this baseband g930aucubctb1. I previously had a s7 edge and was able to flash phone with a g935u baseband. It unbranded phone, it enabled wifi calling, caller id that is native to t mobile, I think so anyway. can I do that with my current s7?
Click to expand...
Click to collapse
Yes.
cooltt said:
Yes.
Click to expand...
Click to collapse
Any idea what firmware version I can flash to get it to g930u?
mikewv100 said:
Any idea what firmware version I can flash to get it to g930u?
Click to expand...
Click to collapse
Yes it's called G930U from sammobile funnily enough.
cooltt said:
Yes it's called G930U from sammobile funnily enough.
Click to expand...
Click to collapse
Thanks. I have spent an hour trying to find a free download of the g930uuesbcta3 firmware. I have found 6 hour free download and anything at normal speed wants you to jump through hoops. Am I missing an easier way?
mikewv100 said:
Thanks. I have spent an hour trying to find a free download of the g930uuesbcta3 firmware. I have found 6 hour free download and anything at normal speed wants you to jump through hoops. Am I missing an easier way?
Click to expand...
Click to collapse
Use Sam Firm Tool attached .
unzip and run application as admin
Model - SM-G930U
Region - XAA
Hit check update then download.
SamFirm Tool pulls firmware straight from Samsung servers much faster than free downloads.
It will decrypt once downloaded and your left with a zip file.
Unzip and place the 4 files in Odin to flash the G930U firmware. Code XAA is unbranded USA.
Use CSC for a new phone completely wiped or CSC_HOME to keep your files and settings.
odin
cooltt said:
Use Sam Firm Tool
I just want to make sure that I am on the same page with you. I have a sm-g930a from att. Wanting to flash with sm-g930u region xaa
Will this work? And which version of Odin should I use??
Thank you in advance
unzip and run application as admin
Model - SM-G930U
Region - XAA
Hit check update then download.
SamFirm Tool pulls firmware straight from Samsung servers much faster than free downloads.
It will decrypt once downloaded and your left with a zip file.
Unzip and place the 4 files in Odin to flash the G930U firmware. Code XAA is unbranded USA.
Use CSC for a new phone completely wiped or CSC_HOME to keep your files and settings.
Click to expand...
Click to collapse
Thank you very much.
is this odin version the correct one? Odin 3.14.1?
mikewv100 said:
Thank you very much.
is this odin version the correct one? Odin 3.14.1?
Click to expand...
Click to collapse
No use 3.13
cooltt said:
No use 3.13
Click to expand...
Click to collapse
Still having issues, mayne if I give you a little more infor you can point me in the right direction.
I have a galaxy s7 snapdragon from ATT I was able to upgrade suing odin to G930AUCUBCTB1
I used samfirm as you suggested and I am trying to flash to the g930u firmware G930UUESBCTA3
odin fails as soon as I start to flash. I am using odin 3.13.1 sha256
mikewv100 said:
Still having issues, mayne if I give you a little more infor you can point me in the right direction.
I have a galaxy s7 snapdragon from ATT I was able to upgrade suing odin to G930AUCUBCTB1
I used samfirm as you suggested and I am trying to flash to the g930u firmware G930UUESBCTA3
odin fails as soon as I start to flash. I am using odin 3.13.1 sha256
Click to expand...
Click to collapse
It looks like you are trying to downgrade your firmware from TB1 to TA3 in the unbranded. You can't go down, only up. I think you need a G930UUESBCTB1 or newer in order to be successful in Odin.
Sent from my [device_name] using XDA-Developers Legacy app
I used samfirm and 930u only has the firmware G930UUESBCTA3 my current firmware 930aucubctb1.
So I assume that my current firmware is a newer build than the 930u.
So without a later version of the u software and I don't think I can downgrade my current 930a.
I am out of luck until the u gets an upgraded firmware version,
Am I missing something?