FINALLY FOUND AN UNOFFICIAL WAY TO UNBRICK YOUR HARD BRICKED REDMI NOTE 5 PRO [WHYRED]
PLEASE OFFICIALS MODERATOR LET ME HELP THE USERS
1. DOWNLOAD OFFICIAL XIAOMI MI FLASH TOOL FROM HERE 28-05-2018 VERSION :
https://mega.nz/#!ospEzaJJ!PCnKNwFQ-mLqT8JqoNtqrzVGqloIDgpGaj4Qv34pA9c
2. DOWNLOAD THE 7ZIP FROM HERE
https://www.7-zip.org/download.html
3. DOWNLOAD THE ZIP FILE FROM GDRIVE
https://drive.google.com/open?id=1cAeKM5VI6g1yBbwzDdM-xlLG5Hg-FPLB
NOW MOST IMPORTANT AFTER YOU DOWNLOAD THE FILES
UNZIP THE GDRIVE FILE USING 7ZIP
OPEN MI FLASH TOOL AND BROWSE TO THE FILE
SELECT CLEAN ALL AND FLASH IT
IT WILL WORK
YOU WILL BE ROLLED BACK TO MIUI 9 GLOBAL ROM
I KNOW THAT I AM POSTING IT TOO LATE I WAS TESTING IT ON MANY DEVICES FROM 3 DAYS AND ALL WORKED. PLEASE APPRECIATE THIS POST
Does it require the device to be opened and to be put in edl test point?
jainamshah75 said:
FINALLY FOUND AN UNOFFICIAL WAY TO UNBRICK YOUR HARD BRICKED REDMI NOTE 5 PRO [WHYRED]
PLEASE OFFICIALS MODERATOR LET ME HELP THE USERS
1. DOWNLOAD OFFICIAL XIAOMI MI FLASH TOOL FROM HERE 28-05-2018 VERSION :
https://mega.nz/#!ospEzaJJ!PCnKNwFQ-mLqT8JqoNtqrzVGqloIDgpGaj4Qv34pA9c
2. DOWNLOAD THE 7ZIP FROM HERE
https://www.7-zip.org/download.html
3. DOWNLOAD THE ZIP FILE FROM GDRIVE
https://drive.google.com/open?id=1cAeKM5VI6g1yBbwzDdM-xlLG5Hg-FPLB
NOW MOST IMPORTANT AFTER YOU DOWNLOAD THE FILES
UNZIP THE GDRIVE FILE USING 7ZIP
OPEN MI FLASH TOOL AND BROWSE TO THE FILE
SELECT CLEAN ALL AND FLASH IT
IT WILL WORK
YOU WILL BE ROLLED BACK TO MIUI 9 GLOBAL ROM
I KNOW THAT I AM POSTING IT TOO LATE I WAS TESTING IT ON MANY DEVICES FROM 3 DAYS AND ALL WORKED. PLEASE APPRECIATE THIS POST
Click to expand...
Click to collapse
Thank you so much.
I hope the way can help Whyred get brick.
I have lose when try https://forum.xda-developers.com/re...e-5-whyred-t3816260/post77068890#post77068890
---------- Post added at 04:42 PM ---------- Previous post was at 04:24 PM ----------
Thank you so much
But your way has error. too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dr.NHTT said:
Thank you so much.
I hope the way can help Whyred get brick.
I have lose when try https://forum.xda-developers.com/re...e-5-whyred-t3816260/post77068890#post77068890
---------- Post added at 04:42 PM ---------- Previous post was at 04:24 PM ----------
Thank you so much
But your way has error. too.
Click to expand...
Click to collapse
All of these new threads are the same. The cracked firehose from this guy https://m.cafe.naver.com/ArticleRead.nhn?clubid=27738104&articleid=273056&page=3&boardtype=L is where it all came from. The thread maker should give credits to him.
Anyway when you have hello packet error you just need to hold power button for 10-15 seconds and try it again. Or unplug it and hold power button for 10 seconds, release and reconnect
devcon69 said:
All of these new threads are the same. The cracked firehose from this guy https://m.cafe.naver.com/ArticleRead.nhn?clubid=27738104&articleid=273056&page=3&boardtype=L is where it all came from. The thread maker should give credits to him.
Anyway when you have hello packet error you just need to hold power button for 10-15 seconds and try it again. Or unplug it and hold power button for 10 seconds, released and reconnect
Click to expand...
Click to collapse
Thank you so much
I will try it
Not working….
"can not found programmer file"
Wow you people never seise to amaze me!
As soon as I've joined the forums, I've seen the uncontrollable need of people to open dozens of threads for the exact same thing. Instead of having one thread where everything about that issue is shared, we have 5-6 threads and it's very easy to get lost.
And to make things worse, people do it so that can get appreciation even if it's not their work!
I understand the brick issue is huge, and the help is needed, but don't make a new thread when there is one already, someone may miss some important info.
awooga said:
Not working….
"can not found programmer file"
Click to expand...
Click to collapse
Remove all spaces in the folder names.
Dr.NHTT said:
Thank you so much.
I hope the way can help Whyred get brick.
I have lose when try https://forum.xda-developers.com/re...e-5-whyred-t3816260/post77068890#post77068890
---------- Post added at 04:42 PM ---------- Previous post was at 04:24 PM ----------
Thank you so much
But your way has error. too.
Click to expand...
Click to collapse
Me too have problem
---------- Post added at 10:21 PM ---------- Previous post was at 09:47 PM ----------
I have storagebsc.mbn style issue...
Cirra92 said:
Wow you people never seise to amaze me!
As soon as I've joined the forums, I've seen the uncontrollable need of people to open dozens of threads for the exact same thing. Instead of having one thread where everything about that issue is shared, we have 5-6 threads and it's very easy to get lost.
And to make things worse, people do it so that can get appreciation even if it's not their work!
I understand the brick issue is huge, and the help is needed, but don't make a new thread when there is one already, someone may miss some important info.
Click to expand...
Click to collapse
Indeed. I came from the Motorola Defy, a legendary powerhouse with its 800 MHz OMAP3, 512 MB RAM and 2GB storage which - mostly due to the diligent work of a group of developers centred around Quarkx2k - went all the way from Gingerbread to KitKat without any support from the vendor and without ever unlocking the boot loader. I was one of the developers for that device and as such was generally satisfied with the level of the discourse in the Defy section of this site. Unfortunately the same can not be said for the Whyred section... from the multitude of 'bro' posts through the karma whoring plagiarisers to the number of 'mine no workee fix it' single-line commands I must say I'm disappointed in the direction the XDA forum went.
To all you out there who feel accused by my writing, please realise that developers work for free, in their spare time and share their work freely. If you expect instant service find a paid support channel, if you want to gain fame by posting someone else's work as your own realise that the only fame you'll gain will be that of a wanna-be. If English is not your first language, fine - it isn't for me either - but do try to write something at least resembling that language or find a forum in a language you are more proficient in. Some words are just too obnoxious to be used, 'bro' being a prime example of such. Just drop 'm, they don't serve any purpose.
thanks you
my device back to live
thanks very very much
dustmalik said:
Does it require the device to be opened and to be put in edl test point?
Click to expand...
Click to collapse
if the device is already in qcom mode no need to do it
Worked
jainamshah75 said:
FINALLY FOUND AN UNOFFICIAL WAY TO UNBRICK YOUR HARD BRICKED REDMI NOTE 5 PRO [WHYRED]
PLEASE OFFICIALS MODERATOR LET ME HELP THE USERS
1. DOWNLOAD OFFICIAL XIAOMI MI FLASH TOOL FROM HERE 28-05-2018 VERSION :
https://mega.nz/#!ospEzaJJ!PCnKNwFQ-mLqT8JqoNtqrzVGqloIDgpGaj4Qv34pA9c
2. DOWNLOAD THE 7ZIP FROM HERE
https://www.7-zip.org/download.html
3. DOWNLOAD THE ZIP FILE FROM GDRIVE
https://drive.google.com/open?id=1cAeKM5VI6g1yBbwzDdM-xlLG5Hg-FPLB
NOW MOST IMPORTANT AFTER YOU DOWNLOAD THE FILES
UNZIP THE GDRIVE FILE USING 7ZIP
OPEN MI FLASH TOOL AND BROWSE TO THE FILE
SELECT CLEAN ALL AND FLASH IT
IT WILL WORK
YOU WILL BE ROLLED BACK TO MIUI 9 GLOBAL ROM
I KNOW THAT I AM POSTING IT TOO LATE I WAS TESTING IT ON MANY DEVICES FROM 3 DAYS AND ALL WORKED. PLEASE APPRECIATE THIS POST
Click to expand...
Click to collapse
Thank You so much. i was pretty worried. i thought i lost my phone or will have to pay around 120$ to get motherboard replaced but this worked.
For those who are also going through this. My mobile was dead. no response, no boot, no recovery just dead. Only appeared as Com 8 in drivers. i followed this method and it worked. took 660+ seconds to flash but worked. Thanks to whoever is actually behind this method.
Apply Immediately to get authorization Mi ID.
Apply Immediately to get authorization Mi ID. activete pliz 9587110873
has been successfully installed but stuck recovery and say "miui cant install"
UtkuAblak said:
has been successfully installed but stuck recovery and say "miui cant install"
Click to expand...
Click to collapse
u can install miui 9 using twrp
aajam Khan said:
Apply Immediately to get authorization Mi ID. activete pliz 9587110873
Click to expand...
Click to collapse
please follow the steps there is no need to apply for authorization
Didnt someone try on rn5 ai (china version) . Im already follow the step but get still get error authorization mi id . Or its it just for redmi note 5 global only ?
jainamshah75 said:
u can install miui 9 using twrp
Click to expand...
Click to collapse
My bl is locked
The thing is like that, I had the phone bricked due to the anti rollback and to fix it I tried this method. There was no problem in the flashing process.
The phone turns on and shows the icon of the empty battery (without the percentage below, only one empty battery), so I put it to charge. After that I try to enter fastboot mode to start twrp, and enter for a few seconds and then return to the empty battery logo. I enter to despair because after that, whatever I do can not get it out of there. I left it loading a time and nothing. In a moment I managed to turn it off, but I could not turn it on anymore. I decide to flash the rom again because it seemed another brick.
When trying to flash back, the previous method was rendered useless, because in some way or another, it needed the authorization of xiaomi ("You are not authorized").
Anyone have a suggestion on how I can fix this?
Related
Hey folks,
I tried to modify Tab 3 10.1 Wifi Frameworks to natively enable Advanced Reboot Menu
WARNING:
- This hasn't been tested => I don't own a Tab 3 10.1
- This is a very earlier build => It may simply break your tablet or may not work
- This is a ported feature from an ARM CPU to ax86 CPU => It may just freeze your tablet every reboot :silly:
Do you accept all these conditions ?
If yes
Download the file from Mega.co.nz (290Kb)
Reboot to Recovery
Flash It
Reboot,
Long press power button and see if it works.
else,
Do nothing
Tested in my tab, but when I tried to flash the zip with TWRP an error flashing occurred! So for now it's a fail. Sorry.
Sent from my GT-P5210 using XDA Free mobile app
jdeocares said:
Tested in my tab, but when I tried to flash the zip with TWRP an error flashing occurred! So for now it's a fail. Sorry.
Sent from my GT-P5210 using XDA Free mobile app
Click to expand...
Click to collapse
Which kind of error ?
undetermined flashing error on TWRP md5 checsum its ok
@ Nonta72
I know I may sound s7up1d but what is "modify Tab 3 10.1 Wifi Frameworks" to natively enable "Advanced Reboot Menu"
What is the relation of "Wifi Frameworks" with "Advanced Reboot Menu"?
I bet you that is why you do not get reply. Another approach is like a Video or Picture of what you are trying to achieve. I have the same situation on my thread. But In my case I do not have anything to show yet. I am just testing various methods and had no real results. Good luck.
Carefully read OP before asking -_-
r2d23cpo said:
@ Nonta72
I know I may sound s7up1d but what is "modify Tab 3 10.1 Wifi Frameworks" to natively enable "Advanced Reboot Menu"
What is the relation of "Wifi Frameworks" with "Advanced Reboot Menu"?
Click to expand...
Click to collapse
I didn't say Wifi frameworks, I said Tab 3 10.1 Wifi (aka P5210) frameworks
I bet you that is why you do not get reply. Another approach is like a Video or Picture of what you are trying to achieve. I have the same situation on my thread. But In my case I do not have anything to show yet. I am just testing various methods and had no real results. Good luck.
Click to expand...
Click to collapse
Please OP again, I don't have screenshots cause I don't have the Tab.
I'm leaving this forum forever, No Developper, No Tester, No one who care, at all.
Nonta72 said:
I didn't say Wifi frameworks, I said Tab 3 10.1 Wifi (aka P5210) frameworks .
Click to expand...
Click to collapse
Upss, I ask for forgiveness.
Nonta72 said:
Please OP again, I don't have screenshots cause I don't have the Tab.
I'm leaving this forum forever, No Developper, No Tester, No one who care, at all.
Click to expand...
Click to collapse
I am sorry you feel that way. And yes I TOTALY understand, "No one who care". Just because they all are selling this TAB3 10.1 x86. No it is Not because of it. It is a nice and acceptable device. It is just because everyone sooner or latter got tire of not able to do Mods. Source is incomplete and to many proprietary drivers. SAMSUNG, INTEL & GOOGLE please read this fact and learn for the future.
I hope to see you around.
r2d23cpo said:
Upss, I ask for forgiveness.
I am sorry you feel that way. And yes I TOTALY understand, "No one who care". Just because they all are selling this TAB3 10.1 x86. No it is Not because of it. It is a nice and acceptable device. It is just because everyone sooner or latter got tire of not able to do Mods. Source is incomplete and to many proprietary drivers. SAMSUNG, INTEL & GOOGLE please read this fact and learn for the future.
I hope to see you around.
Click to expand...
Click to collapse
I cooked AmatROM v2.0 3 months ago, but no one to test it and I don't have the device.
So I think we can leave this forum as it's now.
Come on guys be nice with the man!
Sent from my GT-P5210 using XDA Free mobile app
---------- Post added at 01:33 PM ---------- Previous post was at 01:07 PM ----------
Here a picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jdeocares said:
Come on guys be nice with the man!
Sent from my GT-P5210 using XDA Free mobile app
---------- Post added at 01:33 PM ---------- Previous post was at 01:07 PM ----------
Here a picture
Click to expand...
Click to collapse
Did you tried flashing it using CWM instead of TWRP ?
Nop, give me a few days please, I have the night shift at work, Saturday I think is the day! I will be flashing CWM recovery & your mode! Sorry.
jdeocares said:
Nop, give me a few days please, I have the night shift at work, Saturday I think is the day! I will be flashing CWM recovery & your mode! Sorry.
Click to expand...
Click to collapse
No problem dude...Take your time
jdeocares said:
Come on guys be nice with the man!...
Click to expand...
Click to collapse
jdeocares hi I guess it is first time we chat. I do not think I was rude with him. First my English as a second language made me read wrong message. I ask my apologies to him. Then he express there is nobody left to test. I totally agree with him.
Regards this project, I do not see what he is trying to accomplish, What is this "Advanced Reboot Menu for Tab 3 10.1". I ask him for and explanation and suggested he post a more graphic method of what he is trying to accomplish.
So the only I could do was to opened the package to get a glips of his work. And found all is store in a "android.policy.jar" that I can not look at. I see his work is base in 4.4.2 KK and I have 4.2.2. So without more explanation or a reason as why I want to pass all the work to backup and install KK, I left.
Nonta72
Like I said I do not see a gain for me. Now without installing I look again inside your zip file. I can only imagine that you are using the wrong "update-binary", my best guess is that that one is for ARM!. Just a guest. I say this because it size is 168kb. The size of that binary usually is around 521kb!!
So try this one.
Here you have a friend. Keep the good work.
Note: Can I see the source of that "android.policy.jar".
r2d23cpo said:
jdeocares hi I guess it is first time we chat. I do not think I was rude with him. First my English as a second language made me read wrong message. I ask my apologies to him. Then he express there is nobody left to test. I totally agree with him.
Regards this project, I do not see what he is trying to accomplish, What is this "Advanced Reboot Menu for Tab 3 10.1". I ask him for and explanation and suggested he post a more graphic method of what he is trying to accomplish.
So the only I could do was to opened the package to get a glips of his work. And found all is store in a "android.policy.jar" that I can not look at. I see his work is base in 4.4.2 KK and I have 4.2.2. So without more explanation or a reason as why I want to pass all the work to backup and install KK, I left.
Nonta72
Like I said I do not see a gain for me. Now without installing I look again inside your zip file. I can only imagine that you are using the wrong "update-binary", my best guess is that that one is for ARM!. Just a guest. I say this because it size is 168kb. The size of that binary usually is around 521kb!!
So try this one.
Here you have a friend. Keep the good work.
Note: Can I see the source of that "android.policy.jar".
Click to expand...
Click to collapse
Thank you.
You're right, I used an ARM update-binary sorry
You're also right, It's for Android 4.4.2.
About the source of the .jar files; well, I downloaded Tab 3 10.1 KK Firmware from SamMobile.com then deodexed it. Now I'm trying to mod its frameworks without even having the tab on hand!
> Note: I can try to mod JB 4.2.2 frameworks if you're interested in testing.
No problem guys It was a misunderstood, all friends.
YOUR WARRANTY IS NOW VOID. USE IT AT YOUR OWN RISK! I AM NOT RESPONSIBLE FOR ANY DAMAGES OR BRICKS THAT MIGHT HAPPEN UPON FLASHING. YOU HAVE BEEN WARNED!!!
REQUIREMENTS
Flashfile + Drivers + Flashtool:https://www.androidfilehost.com/?fid=24349802275799349
A good working PC that is able to hold battery power for at least 15 minutes in case of any power outages
A good working USB Cable
Internet connection for automatic update of VCOM and Preloader drivers
Of Course Desire 820s with at least 50% battery power
Flashing experience
Confirmed to be working on Desire 820s, ts and ys variants so far. NOT Yet tested on the Desire 820us variant
Please know that you will not be able to install any OTA for this firmware because it is not the original firmware for your device.
REMEMBER This is a full firmware flash and not just a ROM so you MUST know how to revert to your original firmware in case of repairs by warranty.
This Procedure will format your Internal SD Card so please backup before proceeding
HOW TO FLASH WITH SP FLASH TOOL
1. Extract the Downloaded Lollipop Flashfile
2. Install The Drivers Inside *MTK_UsbDriver_autorun_1.0.14_internal.rar*
3. Use The Included Flash tool Click on Scatter-loading by the right
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. In the window that pops up, select MT6752_Android_scatter in the Lollipop Flashfile folder
5. A list with ticked boxes should appear in SP flash tool
6. Select Firmware Upgrade***********************VERY IMPORTANT OR YOU WILL BREAK YOUR PHONE*********
7. Click Download
8. Stop should now be prominent while other options should be grayed out
9. Switch off your phone and wait for at least 10 seconds after it has switched off
11. Connect the switched off phone to the PC via USB cable Press the power button once or twice until pc detects the Phone
12. A progress bar should start running
13. DO NOT INTERRUPT. Wait until you get a Success message (green circle with OK)
14. Disconnect USB cable and switch on the phone
CREDITS
nkk71 for decrypting RUU.
Gibz97 For finding the RUU , and all the valuable information he gave to us ,and of course the well designed thread
Screenshots
Mohamed Yaser said:
CREDITS
nkk71 for decrypting RUU.
Gibz97 For finding the RUU , and all the valuable information he gave to us ,and of course the well designed thread.
Click to expand...
Click to collapse
Great work. So you've installed this European Firmware in your 820s. Just curious to know the region of your 820s? And does v5.0.2 has Cast Screen feature? Request you to post a few screenshots of Camera App.
Thank you very much bro :good:
TWRP for WWE version is ready
Gibz97 said:
Thank you very much bro :good:
TWRP for WWE version is ready
Click to expand...
Click to collapse
I have this error? what I must to do to fix this?
Pana03 said:
I have this error? what I must to do to fix this?
Click to expand...
Click to collapse
Hold volume up and volume down when connecting to PC until when it starts to flash
Ok,i will try later.. tnx
PrateekBHT said:
Great work. So you've installed this European Firmware in your 820s. Just curious to know the region of your 820s? And does v5.0.2 has Cast Screen feature? Request you to post a few screenshots of Camera App.
Click to expand...
Click to collapse
mine was HTC_HK version and it went smoooothly , i will upload screens in next post
Here
Gibz97 said:
Thank you very much bro :good:
TWRP for WWE version is ready
Click to expand...
Click to collapse
we have to unlock bl first ,, will it wipe my data ?
Mohamed Yaser said:
we have to unlock bl first ,, will it wipe my data ?
Click to expand...
Click to collapse
Yes it will wipe data. Just try to see if you will be sent the unlock code
Gibz97 said:
Hold volume up and volume down when connecting to PC until when it starts to flash
Click to expand...
Click to collapse
I try now,for now everthing is good,downloading now,i wait to finish,i will post when finish.. Tnx Gibz
Android is upgrading.. nice I will test rom..
Pana03 said:
I try now,for now everthing is good,downloading now,i wait to finish,i will post when finish.. Tnx Gibz
Android is upgrading.. nice I will test rom..
Click to expand...
Click to collapse
Please share a photo of the bootloader
Gibz97 said:
Please share a photo of the bootloader
Click to expand...
Click to collapse
ok bro.. wait little bit..
see bro..
Gibz97 said:
Hold volume up and volume down when connecting to PC until when it starts to flash
Click to expand...
Click to collapse
I did that, and I got this error. Any solution?
Pana03 said:
ok bro.. wait little bit..
see bro..
Click to expand...
Click to collapse
Same story like the Taiwanese Firmware
---------- Post added at 12:06 PM ---------- Previous post was at 11:54 AM ----------
amirarsyad97 said:
I did that, and I got this error. Any solution?
Click to expand...
Click to collapse
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Gibz97 said:
Same story like the Taiwanese Firmware
---------- Post added at 12:06 PM ---------- Previous post was at 11:54 AM ----------
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Click to expand...
Click to collapse
No , he just broke his partitions as i got in his PM
He must use Kitkat preloader frist
Simply
-Flash kk
-Then flash lp
Gibz97 said:
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Click to expand...
Click to collapse
My bad. I'm using v5.1452.00. Problem now fixed. But now the imei and cid still the same as the taiwanese firmware. And I can't unlock bootloader (invalid cid).
I tried to flash twrp using flashtool even the bootloader is locked. But I can't reboot to recovery and software status changed to modified. (that is expected). Surprisingly, I can reboot to recovery after flashing the stock one.
Help Please...
A little noob questions...
1. How to know if my device is us/ys/ts variant?
2. Do i need to unlock the bootloader to flash the rom?
3. How to root KitKat on my Desire 820s without bricking for backing up my IMEI?
goldenevil47 said:
A little noob questions...
1. How to know if my device is us/ys/ts variant?
2. Do i need to unlock the bootloader to flash the rom?
3. How to root KitKat on my Desire 820s without bricking for backing up my IMEI?
Click to expand...
Click to collapse
1. You can see that on the back of you phone,there write like this: ''Model820ts(or ys or us)''
2.I mean no,only follow tutorial and you will flash firmwork easy..
3.I don't know answer for this question..
:good::good::laugh:
---------- Post added at 10:41 AM ---------- Previous post was at 10:39 AM ----------
Gibz97 said:
Same story like the Taiwanese Firmware
---------- Post added at 12:06 PM ---------- Previous post was at 11:54 AM ----------
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Click to expand...
Click to collapse
Yeah same story,i try to get code from htcdev.com for unlocking bootloader but I failed..
I've been looking everywhere for a sub-forum for this device but XDA has not seen fit to create one yet. So, if I'm posting this in the wrong area, that's why I did it.
USE AT YOUR OWN RISK! I AM NOT RESPONSIBLE FOR YOUR DUMB DECISIONS AND BY EXTENSION, YOUR BROKEN PHONE! THIS WILL VOID YOUR WARRANTY AND MAY BRICK YOUR DEVICE
What is this?
Basically it's the deodexed and zipalinged KDZ file in zip format so we can flash it from TWRP.
The instructions on how to root and flash TWRP can be found here
https://forum.xda-developers.com/android/development/recovery-twrp-v3-lg-stylo-2-plus-t3482169
The guy deleted his recovery.img because he was trying to get paid for it somehow or something. So here is the link for the recovery.img
https://drive.google.com/file/d/0B5_Tro_qGCDcMW81VUktRDh5Rms/view?usp=sharing
I did NOT include root because I'm using system-less root to get Android Pay to work.
I tried uploading this directly to XDA so no stupid mirrors however, XDA said the attachment was too large. So instead, I'm uploading this to my personal google drive. Please help me out by mirroring this for other users.
Google Drive DL Link: https://drive.google.com/file/d/0B5_Tro_qGCDcX3FiVWpqZmxwY0U/view?usp=sharing
MD5 HASH: 5f487775cc3a5289f5a67147cb012249
I'm not trying to generate ad revenue, I'm just trying to give back to the community. I don't need anyone to thank me because honestly, all I did was follow the instructions from:
https://forum.xda-developers.com/showthread.php?t=2431204
With one exception. I used the tool here to extract all the pieces in conjunction with the above mentioned tutorial.
https://forum.xda-developers.com/showthread.php?t=2600575
I'm typing this out while flashing it myself for the first time so let me be clear.......
THIS IS UNTESTED
Reserved
@abadasstanker69 i didn't give you the permission to share my twrp port , please remove the link.
It's not "your" anything. TWRP is open source. If mods want to remove it, they can. But I'm not taking anything down.
Hopefully a mod will come remove your profile anyway. Attempting to sell TWRP on your blog through ebay? What kinda nonsense are you trying to pull anyway? Then to have the nerve to advertise it on XDA.... without this community you wouldn't even know how to do it. You're leeching from the REAL work of REAL programmers who dedicated countless hours to develop TWRP. You're robbing from THEM. You should be ashamed
< Mod Edit: Link to blog with paid recovery file removed. Keep this off xda please. >
abadasstanker69 said:
Hopefully a mod will come remove your profile anyway. Attempting to sell TWRP on your blog through ebay? What kinda nonsense are you trying to pull anyway?
< Mod Edit: Link to blog with paid recovery file removed. Keep this off xda please. >
Click to expand...
Click to collapse
What's your problem it's my work and share it the way i like.
You're absolutely NOT sharing it. You're attempting to make money off someone else's work. And it's not YOUR work. It's someone else's work that you're repackaging with your name and a price tag. It's disgusting IMHO
TWRP is and always has been OPEN SOURCE! You can't call dibs on it. You ported it. Big flipping deal. Look. We already have enough info on you to take to TWRP and have them file legal action against you for trying to sell/steal/make profit from their work.
This is why MultiROM doesn't try and sell their ports. It's flipping stupid and illegal.
For anyone else reading this, since XDA's admin doesn't seem to understand what "OPEN souce" means, just PM for the recovery.img I'll build one myself tonight since it's LITERALLY typed out step by step on TWRP's website and requires ZERO talent or effort......
WTF happened to this community? We're old school members so just to let you know, we're forwarding this directly to TWRP so they can take whatever legal actions need to be taken. I hope this admin understands what this means and where this is going. I highly advise you to review your admin agreement and then look at the actual laws governing open source software. https://opensource.org/faq In the mean time, I'll be contacting Ethan Yonker (Dees Troy the ACTUAL developers behind TWRP) to let him know.
https://plus.google.com/+JamesAndersonTheStonedTanker/posts/T5JXsbVQXF5?sfc=false
To anyone else reading this, I'm sorry this got side tracked by people who don't understand even the SPIRIT of this community. I'm even more sorry that this is what this community has devolved into.
Now I'm gonna go complete this talent-less task to allow REAL open source distribution as the original XDA used to be about......
Might wanna read this from the TWRP website, especially the intellectual property part, you agreed to these terms by accessing the site and it's content.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back to the topic.... The rom worked great. I tried it and it worked out fine. I had to enable systemless root and flash the systemless root SU binary to get root but it worked great. Now I'm gonna be working on creating a custom rom or a port. Not sure which one. If anyone is interested or has an opinion, let me know
abadasstanker69 said:
Back to the topic.... The rom worked great. I tried it and it worked out fine. I had to enable systemless root and flash the systemless root SU binary to get root but it worked great. Now I'm gonna be working on creating a custom rom or a port. Not sure which one. If anyone is interested or has an opinion, let me know
Click to expand...
Click to collapse
I have an opinion but you wouldn't like it[emoji14]
bilgerryan said:
Did you check your md5sum and make sure it matches the one on the download page? Sounds like a bad download.
Click to expand...
Click to collapse
ill try download again
---------- Post added at 03:49 PM ---------- Previous post was at 03:42 PM ----------
nope its not it checksum file is good
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
abadasstanker69 said:
Back to the topic.... The rom worked great. I tried it and it worked out fine. I had to enable systemless root and flash the systemless root SU binary to get root but it worked great. Now I'm gonna be working on creating a custom rom or a port. Not sure which one. If anyone is interested or has an opinion, let me know
Click to expand...
Click to collapse
what twrp u flashed it with i cant get it to flash keeps saying error
Thanks OP
MandoH said:
Thanks OP
Click to expand...
Click to collapse
thnks 4 what this **** dont work
ghet2rockuu said:
thnks 4 what this **** dont work
Click to expand...
Click to collapse
Maybe for you.
Can you make one for T-Mobile so I can get nougat faster lol
ghet2rockuu said:
thnks 4 what this **** dont work
Click to expand...
Click to collapse
If you can't get it to work, then don't use it. But obviously others have. Spreading lies isn't gonna help you figure it out. It DOES work.
ayjays said:
Can you make one for T-Mobile so I can get nougat faster lol
Click to expand...
Click to collapse
Sorry bro, don't have t-mobile. However, MetroPCS uses T-Mobile's network so it may work out of the box for you.
ghet2rockuu said:
ill try download again
---------- Post added at 03:49 PM ---------- Previous post was at 03:42 PM ----------
nope its not it checksum file is good
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
what twrp u flashed it with i cant get it to flash keeps saying error
Click to expand...
Click to collapse
I built my own version. I'm not ready to release it yet because it's got some kinks in it. It won't allow TWRP backups to complete. I don't feel like that's worthy of being released unlike that other douche bag who put it out anyway. But if you need it, PM me and I'll send you a download link
So I recently I bought a V8 smart watch thinking that I can “flash” program it, like my old & reliable DZ09, but it wouldn’t accept any other ROMs than v8. What made matter worst is that I even forgot to back up my firmware! Many complications occurred like, invert screen and uncalibrated touch screen.
F-lash-ast forward to about a week ago I bought the same watch, and to my surprise, I was able to extract the ROM successfully AND download it to my near brick v8 smart watch!
You’re probably wondering how? In about a week, I’m going be making an “update” video on how-to use these Flash Tool and extraction methods because when I initially started I had no clue what I was getting myself into. Before I finish this post and potential video, I will list some things I did that might help you out:
Backing up ROMS
-when entering a scatter file using Flash Tools, it doesn’t matter what you “upload to backup”. This is important because even an (red) ERROR message (near the four files you uploaded.) May look bad, but it’s NOT! All in all, you’re trying to back up NOT download yet. So if you see an error, you’re kinda heading in the right direction. (Leave it red)
After uploading a spoof scatter file, you have to use the read back service on Flash Tools. Remove whatever you see there and add and save to wherever you want to save the ROM file. It’ll then prompt two addresses you can alter. Don’t mess with anything except your LENGTH address. I was able to retrieve some info on the FAT address by highlighting over near the bottom on the Flash Tool app; that’s the info you want to use. I believe for my version, which was made in August 26 2018 it’s chipset/MTK6261 FAT LENGTH address is 0x00400000.
Once you’ve done that, use that ReadBack Extractor App to extract and rebuild the ROM file and it’ll give you 4-5 files to use for Flash Tools to DOWNLOAD firmware to your v8 smart watch.
And that pretty much wraps up what I did to successfully backup my “NEW”v8 smart watch rom and DOWNLOAD it to my other “BROKEN”v8 watch. Quite honestly, I didn’t want to buy another smartwatch so I refunded the BROKEN one and was still able to keep it, to just fund the new one...WHICH has the same firmware! The only thing now is to find a IMEI recovery tool to fix your IMEI. Because you duplicated the ROM it also saves the IMEI from that device to the other.
Additionally, most likely after the holidays, I’ll be uploading my firmware to this forum so you can use my backup, so keep an eye out for updates to this page. If you have any questions or concerns don’t hesitate to message me
V8 smart watch almost the perfect choice
Please i need v8 rom of firmware
Please i need v8 rom of firmware
Answer the poll that’s on top of the page and I’ll send you a message with the ROM files to that website.
Please i need v8 rom of firmware i answer
Please i need v8 rom of firmware i answer Please send the files
@kos-greece Greetings friend here I have a firmware the only problem that I see is that the camera does not work.
abdo741 said:
Please i need v8 rom of firmware
Click to expand...
Click to collapse
I’m programming the file today and tomorrow so you’ll be able to fix your problem. I hope you had Holidays were as joyful as mine! I’ll keep you posted if there’s anymore updates!
@abdo741 Hi my friend i have the firmware but not working the camera do you want send you?
---------- Post added at 07:35 PM ---------- Previous post was at 07:04 PM ----------
rakugakijo said:
I’m programming the file today and tomorrow so you’ll be able to fix your problem. I hope you had Holidays were as joyful as mine! I’ll keep you posted if there’s anymore updates!
Click to expand...
Click to collapse
Thanks my friend have a problem my v8 not work the camera I appreciate your help please
jgc81 said:
@abdo741 Hi my friend i have the firmware but not working the camera do you want send you?
---------- Post added at 07:35 PM ---------- Previous post was at 07:04 PM ----------
Thanks my friend have a problem my v8 not work the camera I appreciate your help please
Click to expand...
Click to collapse
Hi @abdo741 ! Please... can you share the firmware? I have a problem with my firmware... :crying:
My friend any firmware works because the camera is no working i tested all Systems sorry my English https://drive.google.com/file/d/1MVnf-okmv8C2ZH8qj4ncDJ-wrGoHy5rG/view?usp=shariorks https://drive.google.com/file/d/1MVnf-okmv8C2ZH8qj4ncDJ-wrGoHy5rG/view?usp=sharing
---------- Post added at 05:16 PM ---------- Previous post was at 05:11 PM ----------
@rakugakijo bro you finish the firmware ?
Unfortunately, my problem continues. Apparently it is a firmware or clock problem.
The screen of my watch appears divided in two.
Did anyone have the same problem?
Attached some photos as you see.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you very much to all!
jbeleni said:
Unfortunately, my problem continues. Apparently it is a firmware or clock problem.
The screen of my watch appears divided in two.
Did anyone have the same problem?
Attached some photos as you see.
Thank you very much to all!
Click to expand...
Click to collapse
Your problem is your smartwatch is ips and the firmware is TFT. Tested this firmwares good luck
https://drive.google.com/file/d/1HnKqUQyR7YDQ1x9kLi5i0oO0Zbb6pPkA/view?usp=sharing
jgc81 said:
Your problem is your smartwatch is ips and the firmware is TFT. Tested this firmwares good luck
https://drive.google.com/file/d/1HnKqUQyR7YDQ1x9kLi5i0oO0Zbb6pPkA/view?usp=sharing
Click to expand...
Click to collapse
Thanks for the help, unfortunately no ROM has worked for me. Could you get me to know which sites I could investigate?
Thank you
jbeleni drive.google.com/drive/folders/1xPg2qM-C8n1oB8yWS5zcF_WuawbVK20i?usp=sharing try this by Golem_
jgc81 said:
jbeleni drive.google.com/drive/folders/1xPg2qM-C8n1oB8yWS5zcF_WuawbVK20i?usp=sharing try this by Golem_
Click to expand...
Click to collapse
THANK'S It's works!!
Hi which work??? Showme
jgc81 said:
Hi which work??? Showme
Click to expand...
Click to collapse
The file "proshivka.rar" work's for me.
errror problem
hi guyes when i try to flash my dead v8 watch this error pop up ,
FLASH TOOL ERROR : S_BROME_BBCHIP_HW_VER_INCORECT (2022)
Target Baseband chip inconsistent with bin files!
i test more than 100 firmwares !!!
pls help me
thank you all
It’s probably not the firmware that’s the problem maybe it’s the Length your setting your address
rakugakijo said:
It’s probably not the firmware that’s the problem maybe it’s the Length your setting your address
Click to expand...
Click to collapse
hi . so what i must do aboout it ?
closed
abun880007 said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supported Devices
Samsung Galaxy Tab S6 WiFi - T860 (gts6lwifi)
Samsung Galaxy Tab S6 4G - T860 (gts6l)
Click to expand...
Click to collapse
Are you sure with
Samsung Galaxy Tab S6 4G - T860 (gts6l)?
mine (4G) ist SM-T865
Tronje said:
Are you sure with
Samsung Galaxy Tab S6 4G - T860 (gts6l)?
mine (4G) ist SM-T865
Click to expand...
Click to collapse
sorry you are right was a typo
I don't understand why you would need to be on android 10 for a recovery when the recovery is based off TWRP that works on android 9 and 10? I don't get it.
Techguy777 said:
I don't understand why you would need to be on android 10 for a recovery when the recovery is based off TWRP that works on android 9 and 10? I don't get it.
Click to expand...
Click to collapse
It is built with and Android 10 Kernel base so you might get issues with Android 9
Updated to work with BTF2 Tab base
abun880007 said:
It is built with and Android 10 Kernel base so you might get issues with Android 9
Click to expand...
Click to collapse
I'm not going to lie SHRP 2.3 is awesome on my S7. You have magisk manager options inside recovery, themes look nice and new, you have the camera api 2, fingerprint clear options, it really has just about everything. I still think it would be great to allow internet and a web browser I dont know how that would be possible but I could see it. I hope there is a working permissive kernel for android 10 soon.
The best recovery I have ever seen so far !!!
EDIT
Just one request if possible...in file manager there is no function to select multiple files, so if it is possible to add check boxes for multiple selection.
Anyone else unable to mount system with the YouTube vanced installer? I get an error 1.
I have tried turning off the unmount system in the settings.
Timoxa said:
Anyone else unable to mount system with the YouTube vanced installer? I get an error 1.
I have tried turning off the unmount system in the settings.
Click to expand...
Click to collapse
Well I hate to do this to someone but maybe try TWRP 3.4 that the other developer just made. It's only because the system problems with TWRP 3.3.1 based and Android 10 I'm telling you to try 3.4. So sorry devs know it's kinda crappy to say something in your thread but I believe it's only fair because android 10 doesn't play well with TWRP at the moment. Hopefully the next update by Dee's Troy will be the finally fix to the super partition or dynamic partition as they call it.
---------- Post added at 10:08 PM ---------- Previous post was at 10:01 PM ----------
In all honesty I would bet the devs of this recovery are actually using 3.4 if they already knew about it or if they just found out from me they will switch for now. The nasty part of development is a lot of developers don't use their own updates so that's how you have someone put out a new kernel or ROM thinking it works and everyone says no it's a bootloop. Because they are using some other devs kernel or something that works better and they didn't feel like switching because the ROM, kernel, and TWRP that work the best will be the most popular threads basically.
Techguy777 said:
Well I hate to do this to someone but maybe try TWRP 3.4 that the other developer just made. It's only because the system problems with TWRP 3.3.1 based and Android 10 I'm telling you to try 3.4. So sorry devs know it's kinda crappy to say something in your thread but I believe it's only fair because android 10 doesn't play well with TWRP at the moment. Hopefully the next update by Dee's Troy will be the finally fix to the super partition or dynamic partition as they call it.
---------- Post added at 10:08 PM ---------- Previous post was at 10:01 PM ----------
In all honesty I would bet the devs of this recovery are actually using 3.4 if they already knew about it or if they just found out from me they will switch for now. The nasty part of development is a lot of developers don't use their own updates so that's how you have someone put out a new kernel or ROM thinking it works and everyone says no it's a bootloop. Because they are using some other devs kernel or something that works better and they didn't feel like switching because the ROM, kernel, and TWRP that work the best will be the most popular threads basically.
Click to expand...
Click to collapse
This looks to be a YT Vanced issue, I suspect the Magisk module has not been updated.
For anyone hitting this error, just install Vanced youtube with SAI, easy as pie!
Timoxa said:
This looks to be a YT Vanced issue, I suspect the Magisk module has not been updated.
For anyone hitting this error, just install Vanced youtube with SAI, easy as pie!
Click to expand...
Click to collapse
Yeah that's fine that's how I do it. However it doesn't change the fact that right now on Android 10 you should be on TWRP 3.4 as it correct some of the errors in android 10. Hopefully in a week or 2 they will finish TWRP to work 100 percent with the new super partition and a/b setup. I actually looked up super partitions and actually it make sense because it would allow you to make use of all the space on internal because things can take up what they need to and not extra. Don't get me wrong this recovery updated to TWRP 3.4 source would be better yet but still.
Hello~
I couldn't find anything in the BUA1 folder. (GDrive)
Is there anything wrong?
Also, BTK2 folder has data. It's the old version, but...
there is no T860 folder in SForge.
coey0814 said:
Hello~
I couldn't find anything in the BUA1 folder. (GDrive)
Is there anything wrong?
Also, BTK2 folder has data. It's the old version, but...
there is no T860 folder in SForge.
Click to expand...
Click to collapse
Sorry my fault the files are now in the release folder
abun880007 said:
Sorry my fault the files are now in the release folder
Click to expand...
Click to collapse
Thank you very much for responding quickly!
Always thank you for your hard work.
But,,, sorry to bother you,
It looks like the same file has been uploaded to BTK2 folder & BUA1 folder, is this normal?
The hash values are the same,
Please check once.
coey0814 said:
Thank you very much for responding quickly!
Always thank you for your hard work.
But,,, sorry to bother you,
It looks like the same file has been uploaded to BTK2 folder & BUA1 folder, is this normal?
The hash values are the same,
Please check once.
Click to expand...
Click to collapse
Thats not normal, might be GDrive mucking up I will remove and reupload
please close this thread
abun880007 said:
please close this thread
Click to expand...
Click to collapse
Thread closed per OP request.