Related
For some reason the computers cannot load the drivers successfully after I connect via USB.
I rolled back on a stock rom and have lost SU and CWM.
I searched around but couldn't find any way of rooting, loading SU and CWM from phone itself.
Help me out on this or how can I fix my USB issue?
rapidreinsta said:
For some reason the computers cannot load the drivers successfully after I connect via USB.
I rolled back on a stock rom and have lost SU and CWM.
I searched around but couldn't find any way of rooting, loading SU and CWM from phone itself.
Help me out on this or how can I fix my USB issue?
Click to expand...
Click to collapse
Yes you can, but it's a long way....
---------- Post added at 09:40 PM ---------- Previous post was at 09:36 PM ----------
I think it is easier to fix your drivers into PC ....
---------- Post added at 09:49 PM ---------- Previous post was at 09:40 PM ----------
Download drivers for Nexus s : http://www.4shared.com/rar/_bgEMHqk/Nexus_S_Drivers_x86__x64.html
Just unpack .....
Now conect your phone with PC and navigate into Device Manager and click right on ( Android phone or Nexus S , find something that you have linked to android or nexus ) and choose update driver software -> and now choose Browse my computer for driver software and choose Nexus_S_Drivers_x86_x64 and OK....Good luck !
surdu_petru said:
Yes you can, but it's a long way....
---------- Post added at 09:40 PM ---------- Previous post was at 09:36 PM ----------
I think it is easier to fix your drivers into PC ....
---------- Post added at 09:49 PM ---------- Previous post was at 09:40 PM ----------
Download drivers for Nexus s : http://www.4shared.com/rar/_bgEMHqk/Nexus_S_Drivers_x86__x64.html
Just unpack .....
Now conect your phone with PC and navigate into Device Manager and click right on ( Android phone or Nexus S , find something that you have linked to android or nexus ) and choose update driver software -> and now choose Browse my computer for driver software and choose Nexus_S_Drivers_x86_x64 and OK....Good luck !
Click to expand...
Click to collapse
I'll give it a shot. I have tried plugging different cables and tried different PC's.
I just get a message pop up saying driver was not installed successfully.
This may be a issue with USB port of phone. Just a guess right now.
In device Manager it is listed as an unknown device. When I try to update the drivers, it simply says my drivers are up to date.
I have another (New) instance of windows and same result on both.
Tomorrow I'll show you how you can root directaly on the phone because it's a long story...
surdu_petru said:
Tomorrow I'll show you how you can root directaly on the phone because it's a long story...
Click to expand...
Click to collapse
I'll wait. So far I have the terminal app on phone. phone state is unlocked but no SU and Stock recovery. Via stock recovery I dunno how to flash SU..
Once I have SU I can use Rom manager
I downgraded to get ICS OTA. They stopped OTA at the moment.
Solved
I couldn't stop laughing... a stupid step made it work
First I thought it is a hardware issue and took it to Samsung Servce center. The guy replaced my USB port. My phone was out of warranty and he asked for $12 USD.
Bad luck, even changing the port didn't work. The same issue. Guy didn't bill me as issue still remained. He suggested to change some IC / chip. Which didn't go down well with me and I took phone with me.
While my phone was connected to PC, it used to pop up device not compatile message everytime the screen sleeps or waked up. So in 'Settings -> Applications -> Development -> Stay awake' I checked the box.
It worked like a charm, I have notification on the phone, able to access it on PC.
Three words---- LOL
Thanks to those who tried to help.
surdu_petru said:
Yes you can, but it's a long way....
---------- Post added at 09:40 PM ---------- Previous post was at 09:36 PM ----------
I think it is easier to fix your drivers into PC ....
---------- Post added at 09:49 PM ---------- Previous post was at 09:40 PM ----------
Download drivers for Nexus s : http://www.4shared.com/rar/_bgEMHqk/Nexus_S_Drivers_x86__x64.html
Just unpack .....
Now conect your phone with PC and navigate into Device Manager and click right on ( Android phone or Nexus S , find something that you have linked to android or nexus ) and choose update driver software -> and now choose Browse my computer for driver software and choose Nexus_S_Drivers_x86_x64 and OK....Good luck !
Click to expand...
Click to collapse
surdu_petru, igot the same issue.
1)fastboot is not recognizing my device and tried with different pc and usb but adb is working fine
2)first time when i rooted my device it went fine after some days flashed factory image(4.1.2)
3)again when i tried to root its not working
4)can you tell me how to flash recovery througn terminal emulator in phone
Have you checked this thread?
http://forum.xda-developers.com/showthread.php?t=2034264
Hello Members. I Have Galaxy S2 E120L. I Flashed It With Official Firmware. The Phone Was Working Fine. But When I Tried To Root It.
odin gives me error again and again. it stop at boot.img . i restart my phone many time.but not working. then i flashed again official frimware,
nothing happens. odin stuck at the point boot.img and my prevoius firmware blocked. and i am unable to do any thing. i change odin versions. but nothing happens, let me know how can i unbrick my phone.
Turn off your phone. Hold down home, power and volume up (not down -- that's for download mode). This will enter recovery mode. Use the volume rocker to move down to 'Wipe user data' and press the power button. Once this is complete use odin to flash the rom.but before doing that.read more on how to flash a rom using odin.hope this will help.good luck.
Now My Mobile Is Fully Stucked. And Not Turning On. Before When I Power It On It Shows that a Black Screen And A Picture Of Mobile And Computer, Shows Odin Mode. But now It is Not Turning On, Its Totaly Dead. Any Suggestion What Should I Do. I USe Usb Cable And Connect It With A Pc , But Odin Not Showing me Any com port. or i saw in device manager no usb connected. There In Pakistan No Samsung Service Center Availiable Or Nor Jtag Availibility, I Want To Get Back To Life My Samsung Galaxy s2 shv-e120L. Any Good Suggestion For Me?
doufani said:
Turn off your phone. Hold down home, power and volume up (not down -- that's for download mode). This will enter recovery mode. Use the volume rocker to move down to 'Wipe user data' and press the power button. Once this is complete use odin to flash the rom.but before doing that.read more on how to flash a rom using odin.hope this will help.good luck.
Click to expand...
Click to collapse
It Is Not Turning On Man... Its Totally Dead.. Is There Any Sollution For This?
usm125 said:
It Is Not Turning On Man... Its Totally Dead.. Is There Any Sollution For This?
Click to expand...
Click to collapse
Do you mean that you can't even enter the CWM? That's terrible.
You may try that continuously. If it still doesn't work, go to Samsung's official websites to find some Help Docs. Or, go to some forums that discuss topics exclusively about your phone model. Good luck!
My Mobile Is Korian Version And Did"t Find Any Thing In The Net World. The Only Way Of My Help Is XDA. Can I Get My Mobile Back To Life? Is There Any Solution
Is your model i9100 or i9100g? It happend to me when i flashed pit from i9100 on i9100g. Even the service could not fix it. Luckly they gave me a new motherboard under warranty.
You can also try usb jig it cheap on ebay
Sent from my GT-I9100G using xda app-developers app
I Have Samsung Galaxy s2 shv-e120L hd Lte 4g.
Yea I Wrongly Flash It a pit of Samsung Galaxy Any call m110s. Now When I Connect My Phone To PC its Show Me some Unkown Usb Driver Name Qsdusb_dload. But I Could Not Got It in Odin Comport Or I Am Not Able To turned It On or Goto Download Mode or Recovery Mode.
usm125 said:
Now My Mobile Is Fully Stucked. And Not Turning On. Before When I Power It On It Shows that a Black Screen And A Picture Of Mobile And Computer, Shows Odin Mode. But now It is Not Turning On, Its Totaly Dead. Any Suggestion What Should I Do. I USe Usb Cable And Connect It With A Pc , But Odin Not Showing me Any com port. or i saw in device manager no usb connected. There In Pakistan No Samsung Service Center Availiable Or Nor Jtag Availibility, I Want To Get Back To Life My Samsung Galaxy s2 shv-e120L. Any Good Suggestion For Me?
Click to expand...
Click to collapse
Stop listening to doufani
---------- Post added at 08:05 AM ---------- Previous post was at 08:03 AM ----------
Actually I think doufani bricked your phone and not you. :sly:
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
Maybe the battery has drained out. And for lack of kernel it isn't charging
Then Suggest me what should i have to do. bcz There is No Samsung Maintenaince Center In My Country. And There Is no Jtag Sollution. So I Badly Needs The Sollution.
caponer said:
Stop listening to doufani
---------- Post added at 08:05 AM ---------- Previous post was at 08:03 AM ----------
Actually I think doufani bricked your phone and not you. :sly:
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
Maybe the battery has drained out. And for lack of kernel it isn't charging
Click to expand...
Click to collapse
i have no sollution to charge out the bettry. i pull out the bettery from the cell and then i connect it to the pc. my pc shows "QHSUSB_DLOAD" as unkown and uninstalled drivers.
I brick my phone due to installaing the pit of Samsung Galaxy S1 Shw m110s Any Call. I Don't Know before Installing This Pit My Odin Always Gives Me The Error That Is Some Thing Like That " xml"write fail at boot.img. i Tried And Tried Again.
Wait while I finish my supper then I will get you the solution
---------- Post added at 10:18 AM ---------- Previous post was at 09:57 AM ----------
Alrite listen carefully. First of all download "helmdall". Then go to http://www.clockworkmod.com/rommanager and download cwm for your device and flash it.
---------- Post added at 10:19 AM ---------- Previous post was at 10:18 AM ----------
Odin doesn't flash .img files directly helmdall does
---------- Post added at 10:45 AM ---------- Previous post was at 10:19 AM ----------
usm125 said:
Then Suggest me what should i have to do. bcz There is No Samsung Maintenaince Center In My Country. And There Is no Jtag Sollution. So I Badly Needs The Sollution.
Click to expand...
Click to collapse
What country is this?????
Here is heimdall >> http://www.glassechidna.com.au/products/heimdall/
How To I Use Heimdall Bcz I Already Said That My Device Is Not Turning On, And I Did not Able To Go To The Download Or Recovery Mode. When I Connect My Device Shows In Task Manager As QHSUSB_DLOAD. ?????????????????
And The Link You Provided http://www.clockworkmod.com/rommanager
There Is No rom For My Device Samsung Galaxy s2 shve120l 4g LTE Hd.??????????
What country is this?????
Click to expand...
Click to collapse
The One And Only in The World Pakistan.
there iz no one to help me?
hi all,
i made a mistake when i flash twr recovery before i unlock the phone, than as the others i had the issue when bootloader is locked, when i try to unlocked it, it go to twr recovery by it self.
than i make my mistake when i had erase the all data using twr recovery , after all the phone never start again :crying:
i can't open fastboot ( is totally dead )
i did try :
- color.zip
- also : https://forums.oneplus.net/threads/...ne-from-hard-brick.184927/page-2#post-8186847
and nothing was worked
please please help
when i used ( Color.zip) i install the drive and it shows ( Qualcomm HS-USB Diagnostics 9006)
but when i used the Msm8974DownloadTool the line where is my phone is connected is stay in RED color !!!!
hy my friend. you have a total brick and you stuck in qualcomm emergency mode.
I habe a tool to repair your partition.
Install the correct qualcomm hsusb driver and pm me.
i will repair your partition
konsolen said:
hy my friend. you have a total brick and you stuck in qualcomm emergency mode.
I habe a tool to repair your partition.
Install the correct qualcomm hsusb driver and pm me.
i will repair your partition
Click to expand...
Click to collapse
hi reallly
i install ( Qualcomm HS-USB Diagnostics 9006) is it this one ?
if it is not. please send me the right one
repeair
hy my friend. you have a total brick and you stuck in qualcomm emergency mode.
I habe a tool to repair your partition.
Install the correct qualcomm hsusb driver and pm me.
i will repair your partition
---------- Post added at 04:30 PM ---------- Previous post was at 04:27 PM ----------
normaly the qcom mode are only 5 sec active.
open device manager and put usb in. the device will pop up for 5 sec so you must in this 5sec right click and update driver. then select the qualcomm driver.
---------- Post added at 04:33 PM ---------- Previous post was at 04:30 PM ----------
After the 5sec the device is not so see because it is in automated DL mode.
Thats my turn then. I try to repair the boot partition that you get normaly in recovery.
konsolen said:
hy my friend. you have a total brick and you stuck in qualcomm emergency mode.
I habe a tool to repair your partition.
Install the correct qualcomm hsusb driver and pm me.
i will repair your partition
---------- Post added at 04:30 PM ---------- Previous post was at 04:27 PM ----------
normaly the qcom mode are only 5 sec active.
open device manager and put usb in. the device will pop up for 5 sec so you must in this 5sec right click and update driver. then select the qualcomm driver.
---------- Post added at 04:33 PM ---------- Previous post was at 04:30 PM ----------
After the 5sec the device is not so see because it is in automated DL mode.
Thats my turn then. I try to repair the boot partition that you get normaly in recovery.
Click to expand...
Click to collapse
ok i just did
what the next ??
konsolen said:
hy my friend. you have a total brick and you stuck in qualcomm emergency mode.
I habe a tool to repair your partition.
Install the correct qualcomm hsusb driver and pm me.
i will repair your partition
---------- Post added at 04:30 PM ---------- Previous post was at 04:27 PM ----------
normaly the qcom mode are only 5 sec active.
open device manager and put usb in. the device will pop up for 5 sec so you must in this 5sec right click and update driver. then select the qualcomm driver.
---------- Post added at 04:33 PM ---------- Previous post was at 04:30 PM ----------
After the 5sec the device is not so see because it is in automated DL mode.
Thats my turn then. I try to repair the boot partition that you get normaly in recovery.
Click to expand...
Click to collapse
it shows now (( Qualcomm&Prod_MMC_Storage USB Device ))
is that what you mean ?
MazyooN77 said:
it shows now (( Qualcomm&Prod_MMC_Storage USB Device ))
is that what you mean ?
Click to expand...
Click to collapse
i just solve the issue
Hi guys, I am facing a lot of issues after the marshmallow update on moto G3, locked and unrooted. The thing that triggered this was one day when my internal memory got full, it rebooted. And since then i have faced unbelievable number of issues. No notifications, quick access not working, home n recent buttons not working, incoming call getting rejected and lots of other issues. When i try to enable developer settings and tap build number multiple number of times, nothing happens. No matter how much i try, i am not able to enable developer settings. USB debugging is not working of course and computer won’t recognise the phone, not even in mtp mode. Since quicksettings/notification pulldown is not working, there is no way to change it to MTP mode.
Further, when i go to backup and reset in settings, i see that that the reset option is grayed out. When i try to go to recovery to hard reset, it won’t go to the recovery, just stays on that stupid ‘no input’ screen despite pressing power and volume up key together. I am out of options and since the usb debugging is not working i dunno what more i can do to salvage the phone! Please help me if you can…
It is got frf locked. You have to frf unlock it.
There is a fast boot command for erase data.. will search for it now
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
fastboot erase cache
fastboot erase userdata
fastboot erase customize
---------- Post added at 07:38 PM ---------- Previous post was at 07:38 PM ----------
This will erase all your data including photos etc
But I dont think u need usb debug if u want to connect to some kind of pc program for moto?I may be wrong (i have a Sony)
Sent from my D6603 using Tapatalk
Arcade said:
It is got frf locked. You have to frf unlock it.
Click to expand...
Click to collapse
Thanks for giving a name for my strange problem lol! But i don't know anything about frf lock n unlock. Could u plz give me a brief idea as to how to get it unlocked?
HelpMeruth said:
There is a fast boot command for erase data.. will search for it now
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
fastboot erase cache
fastboot erase userdata
fastboot erase customize
---------- Post added at 07:38 PM ---------- Previous post was at 07:38 PM ----------
This will erase all your data including photos etc
Click to expand...
Click to collapse
Thanks for searching the commands, but sadly it won't work since the debugging is not on. As i mentioned in the OP, adb is not able to see the device. I could just flash the os again if fastboot commands were working! I am still this problem coz fastboot is useless as i am not able to turn on debugging.
Xperia U Lover said:
But I dont think u need usb debug if u want to connect to some kind of pc program for moto?I may be wrong (i have a Sony)
Sent from my D6603 using Tapatalk
Click to expand...
Click to collapse
Motorola does not have a pc program.
zazzy24 said:
Thanks for giving a name for my strange problem lol! But i don't know anything about frf lock n unlock. Could u plz give me a brief idea as to how to get it unlocked?
Thanks for searching the commands, but sadly it won't work since the debugging is not on. As i mentioned in the OP, adb is not able to see the device. I could just flash the os again if fastboot commands were working! I am still this problem coz fastboot is useless as i am not able to turn on debugging.
Motorola does have a pc program.
Click to expand...
Click to collapse
I'm pretty sure he means FRP locked for Factory Reset Protection but I doubt your problem is that.
Sent from my SM-T530NU using XDA-Developers mobile app
Debugging doesn't need to set to on.. go to the bootloader and use my commands that I gave you
HelpMeruth said:
Debugging doesn't need to set to on.. go to the bootloader and use my commands that I gave you
Click to expand...
Click to collapse
Ok let me give u a liitle background to make u understand the exact situation. When the issue began about 3 weeks back, the 1st thing i thought of doing was to connect it to my computer and reflash the firmware from lost101's thread. However, i realised that adb was not able to see my device. All the commands that u mentioned are not working....
Sorry thought you were saying only adb didn't work
---------- Post added at 05:06 AM ---------- Previous post was at 05:06 AM ----------
Which errors showed up
Sorry to reply so late but i had to get a new phone as that one became unusable.. Thanks a lot for your help n support though!
Sent from my Moto G (4) using Tapatalk
i install twrp after unlock bootloader , i flashed stock rom but i forgot to wipe system , data before flashed
My device's No Fastboot, No recovery, No Display, hard bricked
i's only vibrate when i press power button
red blink when connect usb cable
anyone has same problem? help me pls..
Same here. But i have yet to find anyone to get it past the black screen.
.
when you try to boot into recovery.. try to. hold the vol up button for a sec after it it should have loaded.. that whats mine was doing.. black screening
Any news? My device also bricked.
Me to, I got stuck in updating firmware process or corrupted firmware file. I'm also stuck with black screen no recovery, Fastboot mode, computer won't recognize device, phone just blinks red notification light when cable plugged in, power button vibration, also looking for fix. The phones only week old, had to buy another one. I'm now stuck with the new device can't get into twrp just presented a black screen when booting into twrp, only way to get into twrp is with adb, fastboot/boot/twrp.Img which sucks really like the device
Same problem, I can't acces to bootloader, fastboot, recovery
it's only vibrate when i press power button and the red led blink when I connect the usb cable
Someone found a solution ?
Roxy34 said:
Same problem, I can't acces to bootloader, fastboot, recovery
it's only vibrate when i press power button and the red led blink when I connect the usb cable
Someone found a solution ?
Click to expand...
Click to collapse
I've been working on a similiar issue on a ZU680KL for a friend of mine for a few months now. I ended up buying a USB-C type of an EDL cable. I am able to get some software's to better recognize the phone now including Xiaomi's MiFlash, and have found variations of the files that QPST wants when trying it as a solution, but the raw flash programmer file's I have found, though for right chipset, or probably intended for other devices are the partition tables for example would all be different. This whole project to me as I just recently described it, feels like trying to glue a shattered light bulb back together using liquid glue like the kind they use to have us use in Elementary school on paper projects, and to make it more fun, every time you look away, someone's throwing away more and more of the puzzle pieces on us. lol. Frustrating as all hell. It's as if Asus never wanted or intended for us to restore these phones from an EDL or low level NVRAM status. Wish I had the exact answer. Plan to waste a few hours of today on it again though, being how I found this thread researching it some more. Good luck to all.
solved? I have easy way to fix
regards
grean said:
solved? I have easy way to fix
regards
Click to expand...
Click to collapse
what's easy way to fix? thanks^_^
If you watch YouTube videos, you find virtually nothing. There is one Portugese video, but they never show the phone in a completely dead state of black screen with a couple vibrations & an occasional blinking light. This state is truly bricked. There are a couple fake videos also, wanting you to just look at stuff, but it's just a stupid ad. We have one working Zenfone 3 ultra, & one seriously did one. I've offered 100's of $$ to anyone to bring it back to life, & have received ZERO takers. Anybody who's not insane can understand what that means. In other words, so far, forget it. No one has been able to unbrick this model. Only the other Asus models. This Asus model has relatively few purchasers - & has even fewer people willing to mess with it. What a shame.
.
Hello, if someone has a working zu680kl device we could extract the necessary image and fix it using this tutorial:
https://www.droidsavvy.com/unbrick-qualcomm-mobiles/
I think it looks very promising.
I also have a bricked zu680kl device and I don't think about to give it up !!!!
We have a working one, but my better ½ is not about to give it up for an experiment.
.
hillg001 said:
We have a working one, but my better ½ is not about to give it up for an experiment.
.
Click to expand...
Click to collapse
I think there is no risk to brick the device because there will be no installation of any kind of firmware at all. The only thing is to make a backup of all app data because a fresh clean device (factory reset) is necessary. If you like to have a look at the whole procedure search for
Guide, if you are NEW “Qualcomm HS-USB QDLoader 9008” MODE
on the mentioned page
https://www.droidsavvy.com/unbrick-qualcomm-mobiles/
If it would be possible to get the eMMC image I would try to go through the rest of the process. Maybe this brings back our dead devices to life.
Buy your better 1/2 some flowers before you ask
I managed to get it fixed tonight
I did the following steps:
1) Enable Qualcomm HS-USB QDLoader 9008 mode with help of an diy EDL cable.
2) Download the zu680kl raw firmware from here - was not easy to find : http://vietmobile.vn/threads/file-raw-asus-zu680kl-asus-zenfone-3-ultra-zu680kl.46825.html
3) Flash the raw firmware with QFIL
4) Reinstall the stock firmware with fastboot and adb sideload
5) Thank God for help !!!
luckychild said:
I managed to get it fixed tonight
I did the following steps:
1) Enable Qualcomm HS-USB QDLoader 9008 mode with help of an diy EDL cable.
2) Download the zu680kl raw firmware from here - was not easy to find : http://vietmobile.vn/threads/file-raw-asus-zu680kl-asus-zenfone-3-ultra-zu680kl.46825.html
3) Flash the raw firmware with QFIL
4) Reinstall the stock firmware with fastboot and adb sideload
5) Thank God for help !!!
Click to expand...
Click to collapse
Hey what files do you use with the qfil out that raw firmware package or do you just flash the whole raw zip
gubbilo144 said:
Hey what files do you use with the qfil out that raw firmware package or do you just flash the whole raw zip
Click to expand...
Click to collapse
I am not sure - but I think Qfil needs to be set as a Flat Build - not Meta - using files:
Code:
Programmer Path = prog_emmc_firehose_8976_lite.mbn
Download Raw Program = rawprogram0.xml
Download Patch = patch0.xml
Now -- When I try this - I still get an error:
Code:
Download Fail:Sahara Fail:QSaharaServer Fail:The Directory name is invalid
Does anyone get past this at all???
---------- Post added at 10:54 AM ---------- Previous post was at 10:37 AM ----------
deadmatrix said:
Now -- When I try this - I still get an error:
Code:
Download Fail:Sahara Fail:QSaharaServer Fail:The Directory name is invalid
Does anyone get past this at all???
Click to expand...
Click to collapse
Success!
Just solved my own issue - must use a much newer version of Qfil! I was successful with version 2.0.1.7 - I had to install it as opposed to downloading a zipped exe and running from an extraction point.
I downloaded my copy from https://www.androidbrick.com/downloads/
Just scroll down a little and watch for it manually.
Will update as I get further!
---------- Post added at 11:24 AM ---------- Previous post was at 10:54 AM ----------
I can confirm luckychild's success. After six months of nothing but a black screen and a flashing red led and some occasional vibrations - I have restored my friend's ZU680KL that she mailed to me half a year ago. And I have made it to a stock Android desktop.
After you flashing using qfil per my prior post - you will still have a black screen - reboot to see Asus - In search of Incredible come up - rejoice - It'll go straight to the bootloader - from there - you want to run "ftm-flashall.cmd" from the zip you downloaded from the Portuguese website luckychild linked too already. Once it runs, your good to go. Continue on with his instructions. All credit to luckychild for putting the pieces together.
deadmatrix said:
I am not sure - but I think Qfil needs to be set as a Flat Build - not Meta - using files:
Code:
Programmer Path = prog_emmc_firehose_8976_lite.mbn
Download Raw Program = rawprogram0.xml
Download Patch = patch0.xml
Now -- When I try this - I still get an error:
Code:
Download Fail:Sahara Fail:QSaharaServer Fail:The Directory name is invalid
Does anyone get past this at all???
---------- Post added at 10:54 AM ---------- Previous post was at 10:37 AM ----------
Success!
Just solved my own issue - must use a much newer version of Qfil! I was successful with version 2.0.1.7 - I had to install it as opposed to downloading a zipped exe and running from an extraction point.
I downloaded my copy from https://www.androidbrick.com/downloads/
Just scroll down a little and watch for it manually.
Will update as I get further!
---------- Post added at 11:24 AM ---------- Previous post was at 10:54 AM ----------
I can confirm luckychild's success. After six months of nothing but a black screen and a flashing red led and some occasional vibrations - I have restored my friend's ZU680KL that she mailed to me half a year ago. And I have made it to a stock Android desktop.
After you flashing using qfil per my prior post - you will still have a black screen - reboot to see Asus - In search of Incredible come up - rejoice - It'll go straight to the bootloader - from there - you want to run "ftm-flashall.cmd" from the zip you downloaded from the Portuguese website luckychild linked too already. Once it runs, your good to go. Continue on with his instructions. All credit to luckychild for putting the pieces together.
Click to expand...
Click to collapse
Good just got my edl cable in the mail, going try to fix my Asus zenfone 3 ultra that's been in my dresser for 6 months bricked.
---------- Post added at 03:45 PM ---------- Previous post was at 03:24 PM ----------
deadmatrix said:
I am not sure - but I think Qfil needs to be set as a Flat Build - not Meta - using files:
Code:
Programmer Path = prog_emmc_firehose_8976_lite.mbn
Download Raw Program = rawprogram0.xml
Download Patch = patch0.xml
Now -- When I try this - I still get an error:
Code:
Download Fail:Sahara Fail:QSaharaServer Fail:The Directory name is invalid
Does anyone get past this at all???
---------- Post added at 10:54 AM ---------- Previous post was at 10:37 AM ----------
Success!
Just solved my own issue - must use a much newer version of Qfil! I was successful with version 2.0.1.7 - I had to install it as opposed to downloading a zipped exe and running from an extraction point.
I downloaded my copy from https://www.androidbrick.com/downloads/
Just scroll down a little and watch for it manually.
Will update as I get further!
---------- Post added at 11:24 AM ---------- Previous post was at 10:54 AM ----------
I can confirm luckychild's success. After six months of nothing but a black screen and a flashing red led and some occasional vibrations - I have restored my friend's ZU680KL that she mailed to me half a year ago. And I have made it to a stock Android desktop.
After you flashing using qfil per my prior post - you will still have a black screen - reboot to see Asus - In search of Incredible come up - rejoice - It'll go straight to the bootloader - from there - you want to run "ftm-flashall.cmd" from the zip you downloaded from the Portuguese website luckychild linked too already. Once it runs, your good to go. Continue on with his instructions. All credit to luckychild for putting the pieces together.
Click to expand...
Click to collapse
Were do run the ftm-flashall.cmd in qfil or adb
gubbilo144 said:
Good just got my edl cable in the mail, going try to fix my Asus zenfone 3 ultra that's been in my dresser for 6 months bricked.
---------- Post added at 03:45 PM ---------- Previous post was at 03:24 PM ----------
Were do run the ftm-flashall.cmd in qfil or adb
Click to expand...
Click to collapse
Run it from a command prompt window. So like at a DOS Prompt. Nothing to do with ADB.
---------- Post added at 01:17 PM ---------- Previous post was at 01:12 PM ----------
After running the command - it'll boot up to a custom Qualcomm rom - it will have no Gapps of any kind on it. That's why we still need to sideload the rom from Asus's website that you can download from them. I have trouble sideloading over here - not sure why. I have to put it onto a microSD card to flash it from the phone's recovery. Also - Don't forget to wipe data and factory reset it before booting up post of the sideloading. Otherwise it'll possibly get stuck trying to optimize apps - it froze on 'Android is Starting' for me and when I power cycled manually - it corrupted the UI. Had to go back and run the ftm-flashall.bat again.
Just realized the ftm-flashall.cmd that i listed earlier - is a typo - the propper file name should end in a .bat I believe. Sorry for the mistake. Not enough Coffee.
deadmatrix said:
Run it from a command prompt window. So like at a DOS Prompt. Nothing to do with ADB.
---------- Post added at 01:17 PM ---------- Previous post was at 01:12 PM ----------
After running the command - it'll boot up to a custom Qualcomm rom - it will have no Gapps of any kind on it. That's why we still need to sideload the rom from Asus's website that you can download from them. I have trouble sideloading over here - not sure why. I have to put it onto a microSD card to flash it from the phone's recovery. Also - Don't forget to wipe data and factory reset it before booting up post of the sideloading. Otherwise it'll possibly get stuck trying to optimize apps - it froze on 'Android is Starting' for me and when I power cycled manually - it corrupted the UI. Had to go back and run the ftm-flashall.bat again.
Just realized the ftm-flashall.cmd that i listed earlier - is a typo - the propper file name should end in a .bat I believe. Sorry for the mistake. Not enough Coffee.
Click to expand...
Click to collapse
i got it thanks so much guys im updating in recovery now,my asus zenfone 3 ultra paperweight is back alive
gubbilo144 said:
i got it thanks so much guys im updating in recovery now,my asus zenfone 3 ultra paperweight is back alive
Click to expand...
Click to collapse
Glad to hear it! So we have a now reproducable cure after years of nothing in the pipe really. I am thinking of writing a start to finish post of how to deal with it for beginners that can be pinned by a mod. If someone else wants to beat me to this, feel free - especially since I don't actually even own this model of phone.. Might maybe pick it up though.