Hello Members. I Have Galaxy S2 E120L. I Flashed It With Official Firmware. The Phone Was Working Fine. But When I Tried To Root It.
odin gives me error again and again. it stop at boot.img . i restart my phone many time.but not working. then i flashed again official frimware,
nothing happens. odin stuck at the point boot.img and my prevoius firmware blocked. and i am unable to do any thing. i change odin versions. but nothing happens, let me know how can i unbrick my phone.
Turn off your phone. Hold down home, power and volume up (not down -- that's for download mode). This will enter recovery mode. Use the volume rocker to move down to 'Wipe user data' and press the power button. Once this is complete use odin to flash the rom.but before doing that.read more on how to flash a rom using odin.hope this will help.good luck.
Now My Mobile Is Fully Stucked. And Not Turning On. Before When I Power It On It Shows that a Black Screen And A Picture Of Mobile And Computer, Shows Odin Mode. But now It is Not Turning On, Its Totaly Dead. Any Suggestion What Should I Do. I USe Usb Cable And Connect It With A Pc , But Odin Not Showing me Any com port. or i saw in device manager no usb connected. There In Pakistan No Samsung Service Center Availiable Or Nor Jtag Availibility, I Want To Get Back To Life My Samsung Galaxy s2 shv-e120L. Any Good Suggestion For Me?
doufani said:
Turn off your phone. Hold down home, power and volume up (not down -- that's for download mode). This will enter recovery mode. Use the volume rocker to move down to 'Wipe user data' and press the power button. Once this is complete use odin to flash the rom.but before doing that.read more on how to flash a rom using odin.hope this will help.good luck.
Click to expand...
Click to collapse
It Is Not Turning On Man... Its Totally Dead.. Is There Any Sollution For This?
usm125 said:
It Is Not Turning On Man... Its Totally Dead.. Is There Any Sollution For This?
Click to expand...
Click to collapse
Do you mean that you can't even enter the CWM? That's terrible.
You may try that continuously. If it still doesn't work, go to Samsung's official websites to find some Help Docs. Or, go to some forums that discuss topics exclusively about your phone model. Good luck!
My Mobile Is Korian Version And Did"t Find Any Thing In The Net World. The Only Way Of My Help Is XDA. Can I Get My Mobile Back To Life? Is There Any Solution
Is your model i9100 or i9100g? It happend to me when i flashed pit from i9100 on i9100g. Even the service could not fix it. Luckly they gave me a new motherboard under warranty.
You can also try usb jig it cheap on ebay
Sent from my GT-I9100G using xda app-developers app
I Have Samsung Galaxy s2 shv-e120L hd Lte 4g.
Yea I Wrongly Flash It a pit of Samsung Galaxy Any call m110s. Now When I Connect My Phone To PC its Show Me some Unkown Usb Driver Name Qsdusb_dload. But I Could Not Got It in Odin Comport Or I Am Not Able To turned It On or Goto Download Mode or Recovery Mode.
usm125 said:
Now My Mobile Is Fully Stucked. And Not Turning On. Before When I Power It On It Shows that a Black Screen And A Picture Of Mobile And Computer, Shows Odin Mode. But now It is Not Turning On, Its Totaly Dead. Any Suggestion What Should I Do. I USe Usb Cable And Connect It With A Pc , But Odin Not Showing me Any com port. or i saw in device manager no usb connected. There In Pakistan No Samsung Service Center Availiable Or Nor Jtag Availibility, I Want To Get Back To Life My Samsung Galaxy s2 shv-e120L. Any Good Suggestion For Me?
Click to expand...
Click to collapse
Stop listening to doufani
---------- Post added at 08:05 AM ---------- Previous post was at 08:03 AM ----------
Actually I think doufani bricked your phone and not you. :sly:
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
Maybe the battery has drained out. And for lack of kernel it isn't charging
Then Suggest me what should i have to do. bcz There is No Samsung Maintenaince Center In My Country. And There Is no Jtag Sollution. So I Badly Needs The Sollution.
caponer said:
Stop listening to doufani
---------- Post added at 08:05 AM ---------- Previous post was at 08:03 AM ----------
Actually I think doufani bricked your phone and not you. :sly:
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
Maybe the battery has drained out. And for lack of kernel it isn't charging
Click to expand...
Click to collapse
i have no sollution to charge out the bettry. i pull out the bettery from the cell and then i connect it to the pc. my pc shows "QHSUSB_DLOAD" as unkown and uninstalled drivers.
I brick my phone due to installaing the pit of Samsung Galaxy S1 Shw m110s Any Call. I Don't Know before Installing This Pit My Odin Always Gives Me The Error That Is Some Thing Like That " xml"write fail at boot.img. i Tried And Tried Again.
Wait while I finish my supper then I will get you the solution
---------- Post added at 10:18 AM ---------- Previous post was at 09:57 AM ----------
Alrite listen carefully. First of all download "helmdall". Then go to http://www.clockworkmod.com/rommanager and download cwm for your device and flash it.
---------- Post added at 10:19 AM ---------- Previous post was at 10:18 AM ----------
Odin doesn't flash .img files directly helmdall does
---------- Post added at 10:45 AM ---------- Previous post was at 10:19 AM ----------
usm125 said:
Then Suggest me what should i have to do. bcz There is No Samsung Maintenaince Center In My Country. And There Is no Jtag Sollution. So I Badly Needs The Sollution.
Click to expand...
Click to collapse
What country is this?????
Here is heimdall >> http://www.glassechidna.com.au/products/heimdall/
How To I Use Heimdall Bcz I Already Said That My Device Is Not Turning On, And I Did not Able To Go To The Download Or Recovery Mode. When I Connect My Device Shows In Task Manager As QHSUSB_DLOAD. ?????????????????
And The Link You Provided http://www.clockworkmod.com/rommanager
There Is No rom For My Device Samsung Galaxy s2 shve120l 4g LTE Hd.??????????
What country is this?????
Click to expand...
Click to collapse
The One And Only in The World Pakistan.
there iz no one to help me?
Related
For some reason the computers cannot load the drivers successfully after I connect via USB.
I rolled back on a stock rom and have lost SU and CWM.
I searched around but couldn't find any way of rooting, loading SU and CWM from phone itself.
Help me out on this or how can I fix my USB issue?
rapidreinsta said:
For some reason the computers cannot load the drivers successfully after I connect via USB.
I rolled back on a stock rom and have lost SU and CWM.
I searched around but couldn't find any way of rooting, loading SU and CWM from phone itself.
Help me out on this or how can I fix my USB issue?
Click to expand...
Click to collapse
Yes you can, but it's a long way....
---------- Post added at 09:40 PM ---------- Previous post was at 09:36 PM ----------
I think it is easier to fix your drivers into PC ....
---------- Post added at 09:49 PM ---------- Previous post was at 09:40 PM ----------
Download drivers for Nexus s : http://www.4shared.com/rar/_bgEMHqk/Nexus_S_Drivers_x86__x64.html
Just unpack .....
Now conect your phone with PC and navigate into Device Manager and click right on ( Android phone or Nexus S , find something that you have linked to android or nexus ) and choose update driver software -> and now choose Browse my computer for driver software and choose Nexus_S_Drivers_x86_x64 and OK....Good luck !
surdu_petru said:
Yes you can, but it's a long way....
---------- Post added at 09:40 PM ---------- Previous post was at 09:36 PM ----------
I think it is easier to fix your drivers into PC ....
---------- Post added at 09:49 PM ---------- Previous post was at 09:40 PM ----------
Download drivers for Nexus s : http://www.4shared.com/rar/_bgEMHqk/Nexus_S_Drivers_x86__x64.html
Just unpack .....
Now conect your phone with PC and navigate into Device Manager and click right on ( Android phone or Nexus S , find something that you have linked to android or nexus ) and choose update driver software -> and now choose Browse my computer for driver software and choose Nexus_S_Drivers_x86_x64 and OK....Good luck !
Click to expand...
Click to collapse
I'll give it a shot. I have tried plugging different cables and tried different PC's.
I just get a message pop up saying driver was not installed successfully.
This may be a issue with USB port of phone. Just a guess right now.
In device Manager it is listed as an unknown device. When I try to update the drivers, it simply says my drivers are up to date.
I have another (New) instance of windows and same result on both.
Tomorrow I'll show you how you can root directaly on the phone because it's a long story...
surdu_petru said:
Tomorrow I'll show you how you can root directaly on the phone because it's a long story...
Click to expand...
Click to collapse
I'll wait. So far I have the terminal app on phone. phone state is unlocked but no SU and Stock recovery. Via stock recovery I dunno how to flash SU..
Once I have SU I can use Rom manager
I downgraded to get ICS OTA. They stopped OTA at the moment.
Solved
I couldn't stop laughing... a stupid step made it work
First I thought it is a hardware issue and took it to Samsung Servce center. The guy replaced my USB port. My phone was out of warranty and he asked for $12 USD.
Bad luck, even changing the port didn't work. The same issue. Guy didn't bill me as issue still remained. He suggested to change some IC / chip. Which didn't go down well with me and I took phone with me.
While my phone was connected to PC, it used to pop up device not compatile message everytime the screen sleeps or waked up. So in 'Settings -> Applications -> Development -> Stay awake' I checked the box.
It worked like a charm, I have notification on the phone, able to access it on PC.
Three words---- LOL
Thanks to those who tried to help.
surdu_petru said:
Yes you can, but it's a long way....
---------- Post added at 09:40 PM ---------- Previous post was at 09:36 PM ----------
I think it is easier to fix your drivers into PC ....
---------- Post added at 09:49 PM ---------- Previous post was at 09:40 PM ----------
Download drivers for Nexus s : http://www.4shared.com/rar/_bgEMHqk/Nexus_S_Drivers_x86__x64.html
Just unpack .....
Now conect your phone with PC and navigate into Device Manager and click right on ( Android phone or Nexus S , find something that you have linked to android or nexus ) and choose update driver software -> and now choose Browse my computer for driver software and choose Nexus_S_Drivers_x86_x64 and OK....Good luck !
Click to expand...
Click to collapse
surdu_petru, igot the same issue.
1)fastboot is not recognizing my device and tried with different pc and usb but adb is working fine
2)first time when i rooted my device it went fine after some days flashed factory image(4.1.2)
3)again when i tried to root its not working
4)can you tell me how to flash recovery througn terminal emulator in phone
Have you checked this thread?
http://forum.xda-developers.com/showthread.php?t=2034264
So in the process of upgrading from CM7 to CM9, I somehow soft bricked my Infuse 4G. Now all it will do is reboot into blue CWM (version 5.0.2.7) continuously. My computer won't read it in download mode even after installing Kies, and a few sets of drivers (not all at the same time). It says error 43, and won't connect so I can't use odin or heimdall. Where do I need to go from here?
Edit: Update- got it into red CWM, then it rebooted and now I can neither connect it to a computer, or get any CWM options. It will boot into download mode, but my PC won't recognize it still. Safe to say I'm past the point of repair?
use odin 1.8 and flash UCKD5, then flash cm9
---------- Post added at 06:24 PM ---------- Previous post was at 06:20 PM ----------
don't worry, it's far from brick.
It's still saveable...although which program have you been trying with download mode...I suggest heindal as it doesn't require any drivers from kies or Samsung...it downloads and installs custom driver for the phone the first time you run it...
So if you've had no luck with Odin try heimdal...if you had no luck with heimdal try Odin...but on a dif USB port...once heimdal is used Odin can't be used on that USB port...
You also may wanna try a dif USB cable...it could be your cable is semi broken and no longer works wig data transfer...mine was like this and would only charge and woulv no longer transfer data...so I used ny dads which worked...
Sent from my HTC PH39100 using XDA
whcqq said:
use odin 1.8 and flash UCKD5, then flash cm9
---------- Post added at 06:24 PM ---------- Previous post was at 06:20 PM ----------
don't worry, it's far from brick.
Click to expand...
Click to collapse
My problem is that I can't get my computer to see the phone. It just boots to the Samsung screen and hangs there, even if I try to reboot to recovery again. Download mode works, but my laptop tells me there's a problem with the device.
mg2195 said:
It's still saveable...although which program have you been trying with download mode...I suggest heindal as it doesn't require any drivers from kies or Samsung...it downloads and installs custom driver for the phone the first time you run it...
So if you've had no luck with Odin try heimdal...if you had no luck with heimdal try Odin...but on a dif USB port...once heimdal is used Odin can't be used on that USB port...
You also may wanna try a dif USB cable...it could be your cable is semi broken and no longer works wig data transfer...mine was like this and would only charge and woulv no longer transfer data...so I used ny dads which worked...
Sent from my HTC PH39100 using XDA
Click to expand...
Click to collapse
Heimdall doesn't see the phone either. I'll try to find a USB when I go in to work tomorrow, because based on what I've been trying that's a definite possiblity.
I was in your exact situation. Here is how I resolved it: http://forum.xda-developers.com/showthread.php?t=1696716. The heimdall one-click unbrick was able to write to the when nothing else could.
Hope this helps...
Tai'Shar Xda
Yeah you have to go wayyyyy back to stock and then upgrade. Any of the one click restores will work. No way to save your old rom, but you can definitely get out of it...
Try a different usb i been through the same thing...a samsung usb to be specific
Sent from my SAMSUNG-SGH-I997 using XDA
and what if none of that works? ive returned to froyo and stock gingerbread with both odin and heimdall and my phone still goes to recovery! it lets me root with odin and goes into recovery! i can even go to cm9 but it keeps going to recovery everytime!!! please help!!! i gotta have a phone!!!!
RootSuperSU said:
and what if none of that works? ive returned to froyo and stock gingerbread with both odin and heimdall and my phone still goes to recovery! it lets me root with odin and goes into recovery! i can even go to cm9 but it keeps going to recovery everytime!!! please help!!! i gotta have a phone!!!!
Click to expand...
Click to collapse
I think your problem is not a software issue at all, check out this video https://www.youtube.com/watch?v=ifw2_yYP8e0&feature=youtube_gdata_player this fix the problem for me.
Sent from my SAMSUNG-SM-G730A using XDA Premium 4 mobile app
I think I've managed to brick my phone past the point of revival. It's a Samsung Galaxy 551, Power button doesn't turn it on, however Windows recognizes it when it gets pluged in. When I run the adb devices command, it returns a list with nothing in it, however under device manager, it is recognized as a samsung usb device. Can this be fixed?
EDIT: Got into download mode but Odin doesn't recognize phone
Got it to boot into Download mode! Odin however doesnt recognize the phone
Try reinstalling drivers.
Sent from my Galaxy S III
iKoolkid said:
Try reinstalling drivers.
Sent from my Galaxy S III
Click to expand...
Click to collapse
I did that, as well as switching out the cord. No luck.
Try different odin version, computer, or send it out. Honestly it only sounds like a soft brick
Sent from my Galaxy S III
I'm not sure if it's possible to do on your phone, but on mine, when I installed a costume kernel, I got the same issue that you're having...
All I did was to download a stock ROM, with connected the phone in flash mode (volume down + connect to computer) and with flashtool, flashed the rom, and all came back to normal...
But I have a Sony Xperia S...
Look it up on YouTube.. Or try here in FaQ to check the brick section
Sent from my LT26i using xda app-developers app
---------- Post added at 04:25 AM ---------- Previous post was at 04:16 AM ----------
I think that in Samsung cases it is called "download mode" xD
Sent from my LT26i using xda app-developers app
I have rooted many phones but DO NOT consider myself an expert in any way but after countless hours on the search, I am just STUCK And seriously frustrated. Here is my complicated story.
I was rooted but without a custom ROM. In the progress upgraded to 4.3 OTA. Since then my phone has been on the decline...the WI-FI does not turn on, the GPS is erratic, and now I cannot connect via USB to anything.
I have done everything imaginable and suggested to my PC (WIN8) as well as the phone. I cannot connect via ODIN nor KIES as I cannot get the USB to work.
In ODIN Mode I have:
PRODUCT NAME: SCH-I535
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: Enable
WARRANTY BIT: 1
BOOTLOADER RP SWREV: 1
I would prefer to downgrade although I have read this is not an option at this point.
to have functional Wi-Fi and USB connectivity would be great to have again.
Please help!!!
Is my phone considered to be SOFT-Bricked?
Try a new cable and/or a different USB port.
Also kies3 is required. The old kies will not connect to any 4.3 or higher android device. Make sure you have the latest drivers as well
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
Also make sure you have USB debugging on. Go to settings and about phone. Tap on the version several timea and it will bring out the developer options.
Sent from my SCH-I535 using xda app-developers app
Go on kies make sure your phone in UNplugged then click connection trouble shoot. Same thing was happening to me on windows 8 so I temporarily went back to 7. It looks like the drivers get messed up if you go from lets say the download mode drivers to the normal drivers. It seemed like every time before I connected my phone I had to do that.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
Kies 3 does not have the drivers for this phone
ThePagel said:
Go on kies make sure your phone in UNplugged then click connection trouble shoot. Same thing was happening to me on windows 8 so I temporarily went back to 7. It looks like the drivers get messed up if you go from lets say the download mode drivers to the normal drivers. It seemed like every time before I connected my phone I had to do that.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
Kies 3 does not have the drivers for this phone
Click to expand...
Click to collapse
Thanks for the reply and suggestions.
I have tried three different cables, installed Kies 3, two different computer and multiple ports on both systems with all the phone settings as suggested. I now get the following message when connected to the USB cable: USB Device not recognized. Device malfunctioned and Windows (8) does not recognize it. I have removed all software, reinstalled phone drivers.
Sooo frustrating!
ivndrago said:
Thanks for the reply and suggestions.
I have tried three different cables, installed Kies 3, two different computer and multiple ports on both systems with all the phone settings as suggested. I now get the following message when connected to the USB cable: USB Device not recognized. Device malfunctioned and Windows (8) does not recognize it. I have removed all software, reinstalled phone drivers.
Sooo frustrating!
Click to expand...
Click to collapse
Why do you want to connect to kies? It has 4.1.2 it will always fail the flash for us 4.3 people. Use the Verizon updater or odin. Just a fyi kies will never say it recognizes the phone in downloadmode.
ThePagel said:
Why do you want to connect to kies? It has 4.1.2 it will always fail the flash for us 4.3 people. Use the Verizon updater or odin. Just a fyi kies will never say it recognizes the phone in downloadmode.
Click to expand...
Click to collapse
My problem is I cannot get the computer to recognize the phone. I have tried using the code to get into Qualcomm PhoneUtils but I guess I am not sure if that applies to my model phone. This would allow me to confirm the USB settings (MTB?) of the phone.
At this point, any connection would be a HUGE step forward.
Thanks for your help.
ivndrago said:
My problem is I cannot get the computer to recognize the phone. I have tried using the code to get into Qualcomm PhoneUtils but I guess I am not sure if that applies to my model phone. This would allow me to confirm the USB settings (MTB?) of the phone.
At this point, any connection would be a HUGE step forward.
Thanks for your help.
Click to expand...
Click to collapse
You can boot up the phone to a useable state correct?
ThePagel said:
You can boot up the phone to a useable state correct?
Click to expand...
Click to collapse
Yes, the phone is operational; that is to say it makes and receives calls. The Wi-Fi does not turn on and the GPS is very erratic. I have not found any other problems yet, but I am sure that they must be others....
ivndrago said:
Yes, the phone is operational; that is to say it makes and receives calls. The Wi-Fi does not turn on and the GPS is very erratic. I have not found any other problems yet, but I am sure that they must be others....
Click to expand...
Click to collapse
That sucks at least you can make calls. Hope you figure it out. Maybe it has something to do with your warranty bit.
---------- Post added at 01:11 PM ---------- Previous post was at 01:01 PM ----------
Just one more thought. I know you said you tried everything but did you try a factory reset then on first login when Google asks to import saved data like WiFi settings uncheck the box?
Galaxy S3 on 4.3 with Samsung Custom ** FIXED **
This appears to be the fix to my problems.
http://forum.xda-developers.com/showthread.php?t=2586319
Thanks a ton to ThePagel
Hello everyone,
My name is Max, and i have a problem with a tabelt: note 10.1 GT-N8010.
I wanted to fix this tablet because its not booting anymore, its stuck at the logo. things that i tryed.:
1. i tryed to fix it with odin to install a stock rom< odin is finding my tabelt and its installing everything just fine but its still stuck at the boot logo. even after 30min
2. i tryed to unlock USB debugging but that fail. because ADB is not regonizing my tablet, even with the USB drivers installed.
3. i tryed to use the programm called SkipSoft ToolKit, but this tool kit is also using ADB. and like i sad ADB is not finding my tabelt.
Anyone who could help me with this problem, i have been searching XDA formus and google for 1 day now and didnt find any thing that helped me.
Thx for reading,
Regard Max
SEARCH >>> Not Booting .
https://forum.xda-developers.com/search/forum/1737?query=not booting
JJEgan said:
SEARCH >>> Not Booting .
https://forum.xda-developers.com/search/forum/1737?query=not booting
Click to expand...
Click to collapse
this didnt help me at all, becuase i already searched the XDA forum and google.
i think i need to enable USB debugging with my pc. but that's not working
Stock rom via odin does not need usb debug.
Suggest a service center repair if you have read all the no boot threads.
Sent from my SM-N930F using XDA-Developers Legacy app
---------- Post added at 02:43 PM ---------- Previous post was at 02:15 PM ----------
Did you actually flash the correct stock rom for your model??
Sent from my SM-N930F using XDA-Developers Legacy app