Hey everyone
I have TWRP recovery installed and I tried to install two different roms cooked by Aroma ( LG G Pro2 LP Pure Stockrom] by letschky and G4 UX4.0 Rom lg g4 apps based posted by pato2015), and whenever I try to install them, it gets to "starting Aroma installer" and then freezes for like 5 seconds then the phone restarts.
Anyone was able to install any of these roms through TWRP? and if yes, was it the old or latest TWRP?
Anyone has any idea what might the problem be?
thanks in advance
Just in case someone gets this issue in the future, I can now confirm that TWRP v3.2.1 has a problem with roms cooked by Aroma and wont install them. I went on and flashed old TWRP v3.0.2 and installation of Aroma rom over this TWRP version went on smoothly.
Related
I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
kidstretch said:
I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
JeffDC said:
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
Click to expand...
Click to collapse
Yes I can, managed to install MIUI only, latest version.
I also installed Multirom again (on MIUI) and it downloaded cm11s kernel).
Ok managed to go back to my old miui os, now I have 2 miui os and no cm11, also downloaded the Franco kernel 30. How can i check if the cm11 that i had before is still there, if not how can i install it again without screwing my already working miui?
update:
After some tests, this is what's happening.
I believe I have no CM11S on my phone, that is gone!
I have the MIUI V5 running, but when i flash the franco kernel, the phone is stuck on boot (1+1 logo), i have to flash the kernel_kexec_bacon_cm11s to make it boot in MIUI (working).
So, now i have a working rom that works through Mutlirom and I cannot flash a working CM11S rom on the phone.
Any help would be great guys!
Hi there,
I flashed omerjerk' CM 12.1 according to the install guide and also flashed GAPPS afterwards.
CM: http://forum.xda-developers.com/mi-4i/development/rom-cyanogenmod-12-1-t3212636
GAPPS: as suggested in install guide https://github.com/cgapps/vendor_google/tree/builds/arm64 i took the "gapps-5.1-arm64-2015-07-17-15-08.zip"
When rebooting the system, CM optimized all apps and then started.
Then, I got the CM setup screen but the phone did not recognize any touches. After a few seconds the phone restarted again and I got into a loop.
Can someone help please?
EDIT: I have tried different ROMS (e.g. this one but I have the same problem. This time I could swipe through the languages for 1 sec. Then freeze again and restart
I guess your on MIUI 6.7.x.x or 7.0.x.x ...................... to use any custom rom on Mi4i you need to be on MIUI 6.6.x.x or earlier verion to it before u flash custom roms ....
Fastboot your device with 6.6.x.x to fix and install CM or any roms.
99.hemanth said:
I guess your on MIUI 6.7.x.x or 7.0.x.x ...................... to use any custom rom on Mi4i you need to be on MIUI 6.6.x.x or earlier verion to it before u flash custom roms ....
Fastboot your device with 6.6.x.x to fix and install CM or any roms.
Click to expand...
Click to collapse
I got it working.
I tried http://forum.xda-developers.com/mi-4i/development/rom-cyanogenmod-12-1-t3212636
and the guide included already the flash to MIUI 6.6.10
I think everybody should include that step in their guides
Im new to this flashing rom thing, but i catch on real fast if explaned to well... Anyways i have been trying to install a custom rom which i got from this site as well and when i installed the rom it loads up to the screen and iwas able to configure everything but it stucks after i finish configure it and and it only says loading for hours but wont go away .... Can someone help me please and tell me what to do???
N.B
1. bootloader is already unlocked
2.Phone is rooted
3.Phone is wiped before proceeding to install the rom
4. Link to the rom i tryed to install: http://forum.xda-developers.com/showthread.php?t=1545558
Hi.
I did not flash the ROM that you mentioned (Primo-S)!
Which recovery do you use to flash the custom rom? I had some issues with CWMR and had to switch to TWRP ... to flash CM 11 on the Desire-S.
Regards.
Hi.
After rooting the phone (with CMWR) I flashed TWRP recovery to the HTC Desire S (TWRP-saga-2.8.7.0-unofficial.img)
After booting in recovery I installed CM 11 (cm-11-20150702-UNOFFICIAL-XNG3C-saga.zip)
Due to the limited space on the HTC Desire S I installed only a reduced set of GAPPS afterwards (gapps-444-base-20150818-1-signed.zip plus some Gapps afterwards).
I am having a problem installing customs ROM on stock LG G2. My phone was bricked so I reverted to stock AT&G firmware using LG flash tool (Android version - 4.4.2, Kernel version - 3.4.0).
I then perform the following steps:
(1) Enable developer mode with USB debugging
(2) Use Kingo Root to root phone
(3) Install TWRP using AutoRec
(4) Update TWRP to latest version (3.2.1)
This is where the problems start. I get the same result when I try installing crDroid 7.1.2 or Resurrection Remix 5.7.4 custom ROMs.
The installation of the custom ROM (and gapps) succeeds in TWRP and then I reboot the system. However, the reboot always results in the "LG" logo showing for 1/2 seconds and then a constant black screen.
I am able to recover the phone from this by putting it into firmware update and then using LG Flash tool however I would still like to successfully install and use the custom ROMs. Not sure why this is happening (I am sure it might have been treated with in the forums however I cant find anything). Any help would be appreciated here as I really do not want to be stuck on stock AT&T firmware.
Update
randyesh said:
I am having a problem installing customs ROM on stock LG G2. My phone was bricked so I reverted to stock AT&G firmware using LG flash tool (Android version - 4.4.2, Kernel version - 3.4.0).
I then perform the following steps:
(1) Enable developer mode with USB debugging
(2) Use Kingo Root to root phone
(3) Install TWRP using AutoRec
(4) Update TWRP to latest version (3.2.1)
This is where the problems start. I get the same result when I try installing crDroid 7.1.2 or Resurrection Remix 5.7.4 custom ROMs.
The installation of the custom ROM (and gapps) succeeds in TWRP and then I reboot the system. However, the reboot always results in the "LG" logo showing for 1/2 seconds and then a constant black screen.
I am able to recover the phone from this by putting it into firmware update and then using LG Flash tool however I would still like to successfully install and use the custom ROMs. Not sure why this is happening (I am sure it might have been treated with in the forums however I cant find anything). Any help would be appreciated here as I really do not want to be stuck on stock AT&T firmware.
Click to expand...
Click to collapse
Update: It seems as if older ROMs can be installed with no issues. I got a copy of Cyanogen 12 and it installed perfectly and works fine. However, trying to install new ROMs still give issues. Don't know if I am missing something here and/or someone had a similar previous experience.
Hey there.
So, my 6045 was on that awful MM update filled with ads, so I changed the firmware to the Panasonic one in order to be able to install TWRP and next flash either Lineage or RR.
I have no problem installing TWRP using the Idol 3 suite (Here), however, whenever I try to flash the Lineage zip, or the RR zip, it gets stuck on the Powered by Android screen.
I always wipe everything before flashing the zips.
I have tried wiping cache/dalvik after flashing them, and also not wiping. Either way, and with both roms, the phone gets stuck, and I need to use the Panasonic tool again to restore the phone to a functioning state.
Please help, I've been repeating this process about 10 times, and it's getting very frustrating.
Thanks.
EDIT: Is the version of TWRP somehow relevant for this? The latest version I can install is 3.0, from the link provided. If I try to install this one I get a bootloop. Please help.
Hi, u need to flash the MM partitons zip first then the rom . Look on AlekDev customs roms threads, he usualy has the MM partition file.