CM 12.1 restarts after first startup (loop) - Xiaomi Mi 4i

Hi there,
I flashed omerjerk' CM 12.1 according to the install guide and also flashed GAPPS afterwards.
CM: http://forum.xda-developers.com/mi-4i/development/rom-cyanogenmod-12-1-t3212636
GAPPS: as suggested in install guide https://github.com/cgapps/vendor_google/tree/builds/arm64 i took the "gapps-5.1-arm64-2015-07-17-15-08.zip"
When rebooting the system, CM optimized all apps and then started.
Then, I got the CM setup screen but the phone did not recognize any touches. After a few seconds the phone restarted again and I got into a loop.
Can someone help please?
EDIT: I have tried different ROMS (e.g. this one but I have the same problem. This time I could swipe through the languages for 1 sec. Then freeze again and restart

I guess your on MIUI 6.7.x.x or 7.0.x.x ...................... to use any custom rom on Mi4i you need to be on MIUI 6.6.x.x or earlier verion to it before u flash custom roms ....
Fastboot your device with 6.6.x.x to fix and install CM or any roms.

99.hemanth said:
I guess your on MIUI 6.7.x.x or 7.0.x.x ...................... to use any custom rom on Mi4i you need to be on MIUI 6.6.x.x or earlier verion to it before u flash custom roms ....
Fastboot your device with 6.6.x.x to fix and install CM or any roms.
Click to expand...
Click to collapse
I got it working.
I tried http://forum.xda-developers.com/mi-4i/development/rom-cyanogenmod-12-1-t3212636
and the guide included already the flash to MIUI 6.6.10
I think everybody should include that step in their guides

Related

[Q] Problem that happened using Multirom, now i have an unusable phone

I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
kidstretch said:
I had the latest version of CM11 on my Opo 64 GB, was also using Multirom and Miui 4.10.24.
Tried to install the 4.10.31 version, but i did it wrong (i did not go into TWRP, then Multirom, add zip and install, but i just selected install rom and flashed the 4.10.31 zip file).
Now, the main CM11 OS is lost, i cannot boot into it, and i cannot also boot into MIUI.
So, how can i get my CM11 back?
I tried flashing the official version but it gives me error while trying to install it through TWRP.
Also if i reboot the phone and try to choose the MIUI it says
"error, kexec-hardboot support is required to boot this rom.
install kernel with kexec-hardboot support to your internal rom.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
JeffDC said:
I'm probably not understanding, but can you boot from off , into recovery then > TWRP?
Click to expand...
Click to collapse
Yes I can, managed to install MIUI only, latest version.
I also installed Multirom again (on MIUI) and it downloaded cm11s kernel).
Ok managed to go back to my old miui os, now I have 2 miui os and no cm11, also downloaded the Franco kernel 30. How can i check if the cm11 that i had before is still there, if not how can i install it again without screwing my already working miui?
update:
After some tests, this is what's happening.
I believe I have no CM11S on my phone, that is gone!
I have the MIUI V5 running, but when i flash the franco kernel, the phone is stuck on boot (1+1 logo), i have to flash the kernel_kexec_bacon_cm11s to make it boot in MIUI (working).
So, now i have a working rom that works through Mutlirom and I cannot flash a working CM11S rom on the phone.
Any help would be great guys!

How to Install Mokee ROM

Hello im new to mi4i custom rom, i've phone installed MIUI7 global 5.11 version, i would like to install custom rom Mokee to my phone, but i don't know where to start.
you should backup your data first and then flash your phone to MIUI v6.6.1.0
Root your Phone, Install Custom recovery
Flash the Mokee Rom from Custom Recovery
And its Done
Should i flash the fastboot version?
Thanks
BTW can anyone move this thread to Q&A? i unintentionally created it on the wrong section. :/
i tried flashing mokee 5.1 on my mi4i but there are some errrors occuring repeatdly. i tried everything i knew. not happening . help me fix this. here the screenshots of the error.

HTC desire s custom rom issue

Im new to this flashing rom thing, but i catch on real fast if explaned to well... Anyways i have been trying to install a custom rom which i got from this site as well and when i installed the rom it loads up to the screen and iwas able to configure everything but it stucks after i finish configure it and and it only says loading for hours but wont go away .... Can someone help me please and tell me what to do???
N.B
1. bootloader is already unlocked
2.Phone is rooted
3.Phone is wiped before proceeding to install the rom
4. Link to the rom i tryed to install: http://forum.xda-developers.com/showthread.php?t=1545558
Hi.
I did not flash the ROM that you mentioned (Primo-S)!
Which recovery do you use to flash the custom rom? I had some issues with CWMR and had to switch to TWRP ... to flash CM 11 on the Desire-S.
Regards.
Hi.
After rooting the phone (with CMWR) I flashed TWRP recovery to the HTC Desire S (TWRP-saga-2.8.7.0-unofficial.img)
After booting in recovery I installed CM 11 (cm-11-20150702-UNOFFICIAL-XNG3C-saga.zip)
Due to the limited space on the HTC Desire S I installed only a reduced set of GAPPS afterwards (gapps-444-base-20150818-1-signed.zip plus some Gapps afterwards).

Rom flash successfully but gets freeze after boot and restarts

Hi, there I have a strange problem. I am on MIUI stock ROM Global stable 2.2.3.0 (LXIMIDA). I have twrp recovery on it. Whenever I flash any ROM, it flashes successfully. It reboots, does all the upgrading.. but when ROM is ready to show the launcher or setup, it freezes and restarts suddenly. And this repeats again and again getting like boot loop. I am not able to flash any ROM. I tried to flash 2-3 ROMs like Mokee, Resurrection remix etc, but no success. If any one has the solution, please suggest the solution. Thank you.
Install 6.6.10 before flashing other roms.
Firmware flash
Remorcer said:
Install 6.6.10 before flashing other roms.
Click to expand...
Click to collapse
Just the firmware flash will do ok.
Check :
http://forum.xda-developers.com/mi-4i/development/miui-firmware-flash-t3367968
Link to V6.6.10.0.firmware.zip29.3 MB : https://mega.nz/#!Ux9VxRYZ!u5GOK-NeCmzwRlIHRiMj9bo58aL4HNWxyJvEjbvY7Ew

Need uregent help!!! Miui 8 , bootloop !!!!! How to install custom rom with miui 8

I wanted to install cutom rom in my Mi4i working on MIUI 8, so I installed TWRP from toolkit , which also installed SuperSU.But I don't know if my bootloader was unlocked or not?
I saw in a youtube video to flash MIUI 6 first to install Custom rom or you might endup in BOOTLOOP.
In TWRP I wiped Dalvik,Data,Cache,System.
Went to INSTALL, tried installing MIUI6 but that package failed to install. Giving error unable to mount.
I tried custom rom crDroid and it installed but when I restarted I WAS STUCK IN BOOTLOOP.
After a heartattack I finally flashed MIUI8 with MiFLASHER using fastboot image of MIUI 8.
SO, I want to ask IS THERE A WAY TO INSTALL CUSTOM ROM ,IF I AM ON MIUI 8????
And that bootloop was caused beacuse I didn't unlock bootloader when I installed crDroid???
Thanx in advance. Please somebody help???
singharpit800 said:
I wanted to install cutom rom in my Mi4i working on MIUI 8, so I installed TWRP from toolkit , which also installed SuperSU.But I don't know if my bootloader was unlocked or not?
I saw in a youtube video to flash MIUI 6 first to install Custom rom or you might endup in BOOTLOOP.
In TWRP I wiped Dalvik,Data,Cache,System.
Went to INSTALL, tried installing MIUI6 but that package failed to install. Giving error unable to mount.
I tried custom rom crDroid and it installed but when I restarted I WAS STUCK IN BOOTLOOP.
After a heartattack I finally flashed MIUI8 with MiFLASHER using fastboot image of MIUI 8.
SO, I want to ask IS THERE A WAY TO INSTALL CUSTOM ROM ,IF I AM ON MIUI 8????
And that bootloop was caused beacuse I didn't unlock bootloader when I installed crDroid???
Thanx in advance. Please somebody help???
Click to expand...
Click to collapse
I would suggest you to install Resurrection Remix as it is based on miui8 firmware.
You were stuck in bootloop because crDroid was based on miui6 firmware and probably your installation of the same was failed ( Like you're saying )
Since you get "Heart Attack", Prefer clean install.
Wipe system, data, cache, dalvik cache.
Flash Rom, gapps,
Reboot to system.
Note:- To install custom ROMs based on miui6 firmware, first of all, flash the provided firmware in the thread instead of flashing the whole miui6.
Ask further if it doesn't work.
Hit thanks if helped.

Categories

Resources