I got my notification last night, and it's also on At&t's site:
https://www.att.com/devicehowto/tut.../id/stepbystep_KM1171033?make=LG&model=LGH910
Finally!
So, since I don't have an AT&T sim, I'll probably never get the update, right?
I've already flash the H915 KDZ with no issues but I'm thinking about selling the phone and having an AT&T logo on the back and H915 model on software may put some buyers off.
packiepuro said:
So, since I don't have an AT&T sim, I'll probably never get the update, right?
I've already flash the H915 KDZ with no issues but I'm thinking about selling the phone and having an AT&T logo on the back and H915 model on software may put some buyers off.
Click to expand...
Click to collapse
That's correct without an at&t sim you won't get the ota
Sent from my LG-H910 using XDA Labs
cnjax said:
That's correct without an at&t sim you won't get the ota
Click to expand...
Click to collapse
But we should get it with flashing with the PC suite?
Jogg3r said:
But we should get it with flashing with the PC suite?
Click to expand...
Click to collapse
There has never been kdz files for the H910
Sent from my LG-H910 using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got mine this morning
@imcupid Are you willing to dump it?
-- Brian
Don't know whether this helps, it (H910 Oreo) is already online here - - - >>> http://opensource.lge.com/osSch/list?types=ALL&search=h910
runningnak3d said:
@imcupid Are you willing to dump it?
-- Brian
Click to expand...
Click to collapse
It hasn't rolled out to my hometown yet. Which sucks, since I was out of town yesterday and I got the update notice there. Like a sane user, I decided to wait until I got home to do said update, just for the process to hang, followed by a "no updates available" notice here at home so far. I'm impatiently waiting for it to roll out here. I'm hoping it helps with the occasional lag I'm experiencing when using the phone around town...
Tim3tripp3r said:
Don't know whether this helps, it (H910 Oreo) is already online here - - - >>> http://opensource.lge.com/osSch/list?types=ALL&search=h910
Click to expand...
Click to collapse
Isn't that just the kernel source?
Sent from my LG-H910 using XDA Labs
packiepuro said:
so, since i don't have an at&t sim, i'll probably never get the update, right?
I've already flash the h915 kdz with no issues but i'm thinking about selling the phone and having an at&t logo on the back and h915 model on software may put some buyers off.
Click to expand...
Click to collapse
how you did that? Flash the h915 kdz on your h910? I'll try but the lg up said wrong model
if anyone direct me how to off load from phone I can dump it.
packiepuro said:
So, since I don't have an AT&T sim, I'll probably never get the update, right?
I've already flash the H915 KDZ with no issues but I'm thinking about selling the phone and having an AT&T logo on the back and H915 model on software may put some buyers off.[/QUOTE
Voce atualizou e não bricou o aparelho? Voce poderia me dar dicar de como fazer um root no V20?
Click to expand...
Click to collapse
Why I can't update OTA ? Current software is up to date ???
Huhahha said:
Why I can't update OTA ? Current software is up to date ???
Click to expand...
Click to collapse
I moved the date forward a week and the update started. The download was really slow and it took overnight to do the update.
Sent from my PH-1 using Tapatalk
I'm uploading the Dump from LGUP to my AFH >> Here
Is cellular reception working?
packiepuro said:
So, since I don't have an AT&T sim, I'll probably never get the update, right?
I've already flash the H915 KDZ with no issues but I'm thinking about selling the phone and having an AT&T logo on the back and H915 model on software may put some buyers off.
Click to expand...
Click to collapse
I tried flashing h915 oreo flashing on my H910 but I had rare to no cellular reception. Is this working for you? If so, can you kindly guide how did you flashed kdz? I used Partition DL to flash all partitions which didn't work. Everything else worked fine though, except cellular reception
Got my update this morning as well. It took about 15min to complete
Sent from my LG-H910 using Tapatalk
colspot said:
I tried flashing h915 oreo flashing on my H910 but I had rare to no cellular reception. Is this working for you? If so, can you kindly guide how did you flashed kdz? I used Partition DL to flash all partitions which didn't work. Everything else worked fine though, except cellular reception
Click to expand...
Click to collapse
I am making a zip of the H910 Oreo firmware for people that don't have AT&T, so can't get the update.
Unfortunately, there is no KDZ for the H910, so in order to flash it, you have to root on Nougat, and then flash it from TWRP.
Until the issues with the engineering bootloader can be worked out, it will not be for people that want to stay rooted, but again, you will have to root to flash it.
-- Brian
colspot said:
I tried flashing h915 oreo flashing on my H910 but I had rare to no cellular reception. Is this working for you? If so, can you kindly guide how did you flashed kdz? I used Partition DL to flash all partitions which didn't work. Everything else worked fine though, except cellular reception
Click to expand...
Click to collapse
After you flash the kdz, enter LG menu and do a factory reset. You will have signal after that.
*#546368#*915# > SVC Menu > Factory Reset
You'll get an error every time you boot but the whole rom is working fine for me.
---------- Post added at 10:58 AM ---------- Previous post was at 10:51 AM ----------
wesley_fg said:
Voce atualizou e não bricou o aparelho? Voce poderia me dar dicar de como fazer um root no V20?
Click to expand...
Click to collapse
Hey man, please use English on xda so everybody can understand and interact. As far as I know, and please someone correct me if I'm wrong, the H915 and H910 are the same phone actually. So that's why you can flash the other's rom without issues. It's still not possible to root stock oreo though.
same answer in Portuguese:
Fala mano, por favor use inglês no Xda para que todos possam entender e participar. Até onde eu sei, o H915 é H910 São na verdade o mesmo modelo, por isso você pode fazer flash sem brickar nada. Ainda não é possível fazer root no stock oreo.
runningnak3d said:
I am making a zip of the H910 Oreo firmware for people that don't have AT&T, so can't get the update.
Unfortunately, there is no KDZ for the H910, so in order to flash it, you have to root on Nougat, and then flash it from TWRP.
Until the issues with the engineering bootloader can be worked out, it will not be for people that want to stay rooted, but again, you will have to root to flash it.
-- Brian
Click to expand...
Click to collapse
Awesome! Looking forward to it. I would prefer a rooted phone to fix screen retention that LG had one job to fix on oreo..
Related
Hi guys, i am looking for a guide/tutorial to root and install twrp recovery.
It have android 6.0 MM (2016-03-01) and i would like to try CM13. My phone sometimes suddenly restarts (Its used like new, really look new). I think this was caused by battery or something like that. i dont know. it works fine.
I trying using this guide ( 26 august) "root-lg-g3-att-d850-marshmallow-install-twrp"
but i dont know how to boot is fastbook mode. i set " adb reboot bootloader" in CMD and it just restart my phone. Download Mode and Fastboot mode are the same thing?. Sorry i coming from Samsung GT-9300.
TheVergatarious said:
Hi guys, i am looking for a guide/tutorial to root and install twrp recovery.
It have android 6.0 MM (2016-03-01) and i would like to try CM13. My phone sometimes suddenly restarts (Its used like new, really look new). I think this was caused by battery or something like that. i dont know. it works fine.
I trying using this guide ( 26 august) "root-lg-g3-att-d850-marshmallow-install-twrp"
but i dont know how to boot is fastbook mode. i set " adb reboot bootloader" in CMD and it just restart my phone. Download Mode and Fastboot mode are the same thing?. Sorry i coming from Samsung GT-9300.
Click to expand...
Click to collapse
You cannot root MM 6.0. Not sure what guide you where trying but there is no thread here that I seen for rooting a D850 with MM 6.0. I did find some websites in google with missleading click bait titles which have fake info. To root you will first need to downgrade the device using LGUP.
hyelton said:
You cannot root MM 6.0. Not sure what guide you where trying but there is no thread here that I seen for rooting a D850 with MM 6.0. I did find some websites in google with missleading click bait titles which have fake info. To root you will first need to downgrade the device using LGUP.
Click to expand...
Click to collapse
Oh, that´s bad. :crying:
But can i do something? i would like to try custom roms. i was reading 2 threads about downgrade. 1 thread starting by you but says "only d855". I want to downgrade to root and install TWRP.
Hi, i am using this,[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP Post #2 i was receive this message.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can somebody help me.
TheVergatarious said:
Hi, i am using this,[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP Post #2 i was receive this message.
can somebody help me.
Click to expand...
Click to collapse
That's because you can only use LGUP. Flash tool will not work with MM. You need to use LGUP.
Sent from my iPhone using Tapatalk
hyelton said:
That's because you can only use LGUP. Flash tool will not work with MM. You need to use LGUP.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Some guide/post here? i think that was only for variant d855.
TheVergatarious said:
Some guide/post here? i think that was only for variant d855.
Click to expand...
Click to collapse
My guide you used flash tool from. LGUP works with every lg android Device.
Sent from my iPhone using Tapatalk
hyelton said:
My guide you used flash tool from. LGUP works with every lg android Device.
Click to expand...
Click to collapse
Ok i am reading [Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP Post #3, i have *.tot file an d LGUP. but LGUP_8994_DLL works with all variants?
TheVergatarious said:
Ok i am reading [Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP Post #3, i have *.tot file an d LGUP. but LGUP_8994_DLL works with all variants?
Click to expand...
Click to collapse
I'm confused? You'll use LGUP and the tot file for your model.
Sent from my iPhone using Tapatalk
hyelton said:
I'm confused? You'll use LGUP and the tot file for your model.
Click to expand...
Click to collapse
i just need to start
TheVergatarious said:
i just need to start
Click to expand...
Click to collapse
Yes but remember downgrading can be risky when it comes from the newer firmwares.
Sent from my iPhone using Tapatalk
hyelton said:
Yes but remember downgrading can be risky when it comes from the newer firmwares.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Its done!, i have 4.4.2 now! THANKS MAN, i hope to solve problems with restarts!.
i have CM13 ! but, i need to replace the battery..its real problem. thanks man! you are great!!.
LG has just released the source code for the Android N 7.0 software for LG Phoenix 2 (K371)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG K371 V10B stock kdz firmware
https://www.mylgphones.com/lg-k371-stock-firmware-v10b.html
https://mega.nz/#!ywsjgRzB!0pi1P5y5glmb76pzBQz-rStBoOYjK1DiuVmKv9Lv4iI
and LG UP DLL for LG K371
LG UP DLL for LG K371:LGUP_K371.MSI
https://mega.nz/#!OkcyHTbB!kiNTb4hDejFmiK05tkPQR_aJhUQmK9tVRm_Ma65vY4k
Via: https://www.mylgphones.com/att-lg-phoenix-2-k371-android-7-0-nougat-upate.html
asialove2013 said:
LG has just released the source code for the Android N 7.0 software for LG Phoenix 2 (K371)
Via: https://www.mylgphones.com/att-lg-phoenix-2-k371-android-7-0-nougat-upate.html
Click to expand...
Click to collapse
Thank you. Do you know if the KDZ software on this site works for the K371?
Edit: There is none available according to the link.
I'll be getting this phone soon and I want to start development on it. Being able to restore after a softbrick/hardbrick would be useful in developing for this device.
At least filter the kdz of this update.
Since I can not update it by ota
Anyone have a follow-up on this? Some sites say AT&T has already started FOTA for the K371, but I haven't seen anything so far.
Yes, it is available for download. I got it last night. Need Wi-Fi to download though. 1.3GB or so.
Yup, in Houston TX pulling it down now.
siliconvalley785 said:
Yes, it is available for download. I got it last night. Need Wi-Fi to download though. 1.3GB or so.
Click to expand...
Click to collapse
---------- Post added at 10:15 AM ---------- Previous post was at 09:18 AM ----------
While I'm waiting on it to download, do you notice any changes or improvements
?
siliconvalley785 said:
Yes, it is available for download. I got it last night. Need Wi-Fi to download though. 1.3GB or so.
Click to expand...
Click to collapse
I'm waiting the KDZ file... I'm not in the US
siliconvalley785 said:
Yes, it is available for download. I got it last night. Need Wi-Fi to download though. 1.3GB or so.
Click to expand...
Click to collapse
A dump would be nice but I'm not sure how likely that is to do without root or some tool.
Someone please upload the kdz of that compilation, since some are not in the united states
siliconvalley785 said:
Yes, it is available for download. I got it last night. Need Wi-Fi to download though. 1.3GB or so.
Click to expand...
Click to collapse
The update to android 7 is only via ota?
Campero said:
The update to android 7 is only via ota?
Click to expand...
Click to collapse
sadly yes... our option is just waaaaait for the KDZ file
henryro said:
sadly yes... our option is just waaaaait for the KDZ file
Click to expand...
Click to collapse
There is another way with the program LG mobile tool can be updated but it has to be through the United States IP, in case you do not have an application that changes the IP to a United States. In case I managed to update look where the application under kdz and upload to Megaupload
Campero said:
There is another way with the program LG mobile tool can be updated but it has to be through the United States IP, in case you do not have an application that changes the IP to a United States. In case I managed to update look where the application under kdz and upload to Megaupload
Click to expand...
Click to collapse
Are you sure about that? Eres de Venezuela verdad? 584166426929 contactame hablar mejor
henryro said:
Are you sure about that? Eres de Venezuela verdad? 584166426929 contactame hablar mejor
Click to expand...
Click to collapse
Yes, but I do not usually give my number
Campero said:
Si soy de Venezuela
Click to expand...
Click to collapse
Escr
henryro said:
Escr
Click to expand...
Click to collapse
@Campero English please or post two separate posts with translated and original.
Campero said:
The update to android 7 is only via ota?
Click to expand...
Click to collapse
Sadly, I believe so. I've been waiting for mine for awhile, and there's no KDZ or full ROM online yet to use.
Does anyone get this message can not verify software with LG bridge when you upgrade software?
Campero said:
Does anyone get this message can not verify software with LG bridge when you upgrade software?
Click to expand...
Click to collapse
ENG: it's because the update does not depend on LG, it comes directly from at&t. That's why I asked you if you updated it with the method you describe before.
ES: Se debe a que la actualización no depende de LG, viene directamente de at&t. Por eso te pregunté si lo habías actualizado con el método que describes antes.
Yes, seems to be OTA only so far. I'd be happy to dump it if someone wants to provide directions. since we don't have root that may not be easy. Haven't seen any major changes to the device or anything. Just nougat stuff. for AT&T users all the AT&T services (VoLTE, Wi-Fi Calling, Advanced Messaging) are working fine.
Hi! This is my first post, i want to share the Stock Nougat 7.0 Original firmware for XT1572/XT1575 from LATAM, i work with MotoService and found it yesterday after update the program (with date 7 Sept.)
Tested in my XT1575, no bugs, wifi, BT, signal OK.
I came from TruPureXMM 6.0, dont know if you have to come from stock 6.0 or can flash from AOSP, etc.
-- Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------------------------------------------------------
**INSTALLATION** [Don't try with LOCKED bootloader]
1. Put in fastboot mode
2. Run 0Flash.bat and wait until reboot
3. You might have to flash a modem that works in your country, if you are out of signal or no service you need a different modem (stock version its from latam/argentina)
Hit Thanks if it served you! Enjoy!
Links in comments
Firmware [updated 11-17]
https://mega.nz/#!p8BxnYDA!gXkTh258v5ENKwiu3jchplJNalA3D9KSRaorfgKly1I
well... i might as well try it...
wazaa08 said:
Firmware
https://mega.nz/#!YtR1FZjb!9NoBfIGBj8gQPAWD26DNZozrGIYMC74QWumBS78Dy0w"]https://mega.nz/#!YtR1FZjb!9NoBfIGBj8gQPAWD26DNZozrGIYMC74QWumBS78Dy0w
Modem XT1575
https://mega.nz/#!B8hVRLrS!kBTje3OmlpLCq2N8B--6YiUCVDwtbHGQRPoV0WWsFnU"]https://mega.nz/#!B8hVRLrS!kBTje3OmlpLCq2N8B--6YiUCVDwtbHGQRPoV0WWsFnU
Click to expand...
Click to collapse
What is the password?
edit
farvizu76 said:
What is the password?
Click to expand...
Click to collapse
Links corrected
Gracias!
Downloading... Muchas gracias por el aporte!
wazaa08 said:
Hi! This is my first post, i want to share the Stock Nougat 7.0 Original firmware for XT1572/XT1575 from LATAM, i work with MotoService and found it yesterday after update the program (with date 7 Sept.)
Tested in my XT1575, no bugs, wifi, BT, signal OK.
1. Put in fastboot mode
2. Run 0Flash.bat and wait until reboot
3. (XT1575 ONLY) flash 6.0 modem
Hit Thanks if it served you! Enjoy!
Links in comments
Click to expand...
Click to collapse
You forgot add:
Point 3. is impossible after 2. with locked bootloader.
For all, read before flashing:
https://forum.xda-developers.com/moto-x-style/help/unbrick-moto-x-pure-t3672108
Any chance you can upload the OTA August patch ?
Thanks for this ROM! I have a XT1575 Moto X Pure & I was able to install this ROM.
Only issue I've run into is I'm stuck on 3G after flashing the 6.0 modem, but at least I've got signal & data.
I also left my bootloader unlocked, you know, just in case?
I would like 4G LTE back though...
farvizu76 said:
What is the password?
Click to expand...
Click to collapse
dzidexx said:
You forgot add:
Point 3. is impossible after 2. with locked bootloader.
For all, read before flashing:
https://forum.xda-developers.com/moto-x-style/help/unbrick-moto-x-pure-t3672108
Click to expand...
Click to collapse
The modem is flasheable trough fastboot the same way the firmware, dont need unlocked bootloader.
(I could have uploaded the version with the xt1575 modem but I had to upload it all 2 times)
seven5three said:
Thanks for this ROM! I have a XT1575 Moto X Pure & I was able to install this ROM.
Only issue I've run into is I'm stuck on 3G after flashing the 6.0 modem, but at least I've got signal & data.
I also left my bootloader unlocked, you know, just in case?
I would like 4G LTE back though...
Click to expand...
Click to collapse
I have 4g normally in Argentina, try to flash the XT1575 modem from your region (US?)
Download the firmware from your region in pure fw & stuff post here, extract and replace the 3 files of my modem download (NON-HLOS.bin, BTFM.bin , fsg.mbn) and flash it via fastboot
So if this is for the 1575, can I use it in the USA and switch the language to English?
Realize if you use this on a XT1575 in the US, any future OTA's will fail... the modem's won't match the check.
Honestly, I wouldn't recommend this on anything but a Latin America device.
Thanks.
I flashed the Firmware over Lineage 14.1 as strangle this OS has problems with displaying names of incoming calls from Argentine Cellphone. Pecause of the "9" in my Phonebook it did not recognized local incoming calls from cellphone as they appear without the "9". Marshmallow Stock hadnt that problem.
Anyway..so far anything went smooth, but it seams my bootloader is locked now. I see that in the developer option the function
"Unlock OEM" is grayed out but the switch is in the ON position, which shoud indicate the it is unlocked.
How can i check that, as i want to flash custom recovery later.
Thomas_BA said:
Thanks.
I flashed the Firmware over Lineage 14.1 as strangle this OS has problems with displaying names of incoming calls from Argentine Cellphone. Pecause of the "9" in my Phonebook it did not recognized local incoming calls from cellphone as they appear without the "9". Marshmallow Stock hadnt that problem.
Anyway..so far anything went smooth, but it seams my bootloader is locked now. I see that in the developer option the function
"Unlock OEM" is grayed out but the switch is in the ON position, which shoud indicate the it is unlocked.
How can i check that, as i want to flash custom recovery later.
Click to expand...
Click to collapse
Boot into the bootloader, it is displayed right on the screen.
wazaa08 said:
Hi! This is my first post, i want to share the Stock Nougat 7.0 Original firmware for XT1572/XT1575 from LATAM, i work with MotoService and found it yesterday after update the program (with date 7 Sept.)
Click to expand...
Click to collapse
Wonderful! Been waiting for the full firmware package, to avoid the whole process of flashing 6.0 first, applying OTA etc. Thanks!
One question: is it dual-sim compatible? Here in Brazil the firmware is LATAM-DS. Can I flash this one you shared including its original 7.0 modem?
Hi have a XT1575 and i live en Panama can you help me, i don't know how update
wazaa08 said:
Hi! This is my first post, i want to share the Stock Nougat 7.0 Original firmware for XT1572/XT1575 from LATAM, i work with MotoService and found it yesterday after update the program (with date 7 Sept.)
Tested in my XT1575, no bugs, wifi, BT, signal OK.
I came from TruPureXMM 6.0, dont know if you have to come from stock 6.0 or can flash from AOSP, etc.
-- Screenshot:
--------------------------------------------------------------------------------------------------------------
**INSTALLATION** [Don't try with LOCKED bootloader]
1. Put in fastboot mode
2. Run 0Flash.bat and wait until reboot
3. (XT1575 ONLY) flash 6.0 modem (it works in Argentina, you will need a different one for another region)
Hit Thanks if it served you! Enjoy!
Links in comments
Click to expand...
Click to collapse
slicetwo said:
So if this is for the 1575, can I use it in the USA and switch the language to English?
Click to expand...
Click to collapse
This firm is for XT1572, you will need to flash an US modem after flash the firmware.
I will update the post with a US modem too later
(I am sorry to use the translator.)
If that's what I saw in the Xiaomi Forum, I think the pie has been distributed as a beta tester limit.
I did not select the beta tester
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I envy the chosen ones.
Update
GreenF/KCHwan said:
(I am sorry to use the translator.)
If that's what I saw in the Xiaomi Forum, I think the pie has been distributed as a beta tester limit.
I did not select the beta tester
I envy the chosen ones.
Click to expand...
Click to collapse
esa es mi captura de pantalla, debiste ingresar al programa beta para poder acceder a la actualizacion , saludos
that's my screenshot, you should have entered the beta program to be able to access the update, greetings
---------- Post added at 06:21 PM ---------- Previous post was at 05:49 PM ----------
hksq2 said:
esa es mi captura de pantalla, debiste ingresar al programa beta para poder acceder a la actualizacion , saludos
that's my screenshot, you should have entered the beta program to be able to access the update, greetings
Click to expand...
Click to collapse
Ok
sorry
I am sorry to use the photograph without your permission.
Do you want to delete this thread?
Could u take an screenshot of About device info? i wanna see the baseband and kernel version in P release
Abrilabr said:
Could u take an screenshot of About device info? i wanna see the baseband and kernel version in P release
Click to expand...
Click to collapse
Fastbut 9 beta
enjoy ?
https://drive.google.com/file/d/1wQ8...x6EBt74u-/view
monzer said:
Fastbut 9 beta
enjoy
https://drive.google.com/file/d/1wQ8...x6EBt74u-/view
Click to expand...
Click to collapse
The link doesn't work
Are you sure is the real Xiaomi MI A2 Lite Pie beta testing and not another GSI?
Ricky0178 said:
The link doesn't work
Are you sure is the real Xiaomi MI A2 Lite Pie beta testing and not another GSI?
Click to expand...
Click to collapse
I just did fastboot oem unlock (because fastboot flashing unlock and fastboot flashing unlock_critical said unknown command) and then used MiFlash Tool to flash the image, everythin works fine
So this is the real deal no GSI or something
See my procedure here, but I give no guarantee it works for you. These are just the steps I made:
https://forum.xda-developers.com/showpost.php?p=78273427&postcount=22
Does it work without problems? if it works bless you man!
Put the image of fastboot without data loss. Significantly improved responsiveness of the system. I have not found any bugs yet. Attached the correct .sh to anyone.
do i have to wait 72 hours to unlock the bootloader tho?
eddie_phoenix said:
do i have to wait 72 hours to unlock the bootloader tho?
Click to expand...
Click to collapse
bootloader can be unlocked at any time, you do not have to wait for anything.
eddie_phoenix said:
do i have to wait 72 hours to unlock the bootloader tho?
Click to expand...
Click to collapse
No you don't. You can just flash straight away.
monzer said:
Put the image of fastboot without data loss. Significantly improved responsiveness of the system. I have not found any bugs yet. Attached the correct .sh to anyone.
Click to expand...
Click to collapse
Thank you very much, I flashed it through MiFlash (with the adjusted script). Magisk is gone for now obviously, but I hope for something to come the next days.
edit: Got magisk working with the manual patching guide found here : https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
the google drive link isnt working for me
downloadonlyaccount said:
No you don't. You can just flash straight away.
Thank you very much, I flashed it through MiFlash (with the adjusted script). Magisk is gone for now obviously, but I hope for something to come the next days.
edit: Got magisk working with the manual patching guide found here : https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
Click to expand...
Click to collapse
Did you use the boot.img in fastboot image? I tried patching that one but when booted the patched_boot.img magisk doesn't prompt me to install it.
AlessandroL9 said:
Did you use the boot.img in fastboot image? I tried patching that one but when booted the patched_boot.img magisk doesn't prompt me to install it.
Click to expand...
Click to collapse
I had to hit the Install button manually too, so that shouldn't be a problem.
downloadonlyaccount said:
I had to hit the Install button manually too, so that shouldn't be a problem.
Click to expand...
Click to collapse
There isn't the install button, there's only one string that say "installed 17.1" with the green check but I cannot install or uninstall it as I did on previous versions on Oreo with the same method
AlessandroL9 said:
There isn't the install button, there's only one string that say "installed 17.1" with the green check but I cannot install or uninstall it as I did on previous versions on Oreo with the same method
Click to expand...
Click to collapse
Did you click here?
edit: F*** XDA with their link policies....
Not the pop pop, I mean the buttons bleow the "extended options"
downloadonlyaccount said:
Did you click here?
edit: F*** XDA with their link policies....
Not the pop pop, I mean the buttons bleow the "extended options"
Click to expand...
Click to collapse
There's no option I'm magisk... It just says "installed" but there aren't options as there was in oreo (I followed the guide for the previous build with oreo with no problems at all). Don't know what's the problem but I have no time till tomorrow to do it again if I'm not sure it'll work
Edit: today it worked perfectly, probably there was a problem with network connection yesterday at home thanks for all!
Upgrade Lenovo Xiaoxin P11 Pro 2021 to ZUI 14 via OTA (TB-J716F)
!!! ATTENTION !!!
I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.
Check list:
1. Have the tablet Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)
2. Stock ROM
3. Bootloader locked
4. All available OTAs installed, if you don't have it you can use the VPN described below until you get to 14.0.127.
How to do it:
1. Install Returnees vpn app
2. Log in using google account in the app
3. Select a free server from the list and connect, I used ShangHai(free)
4. Open System Update and check for Updates, it should show the version 14.0.127
5. Start the download, after starting go back to the VPN and disconnect, so you will have your full speed for the download and won't consume the quota on the VPN app.
6. After finishing the Upgrade, Install Google Services Framework 12 (Android 12+) , so you will get back google services
7. If you don't have play store install through Lenovo App center that comes with the device.
Notes:
1. I didn't lose Widevine L1
2. I'm able now to connect into 5g networks
3. The tablet performance is much better
Thanks to @carlosfla21 and @titos88
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you share your fpinfo partition? I need yours to compare with mine
thien.nm2905 said:
Can you share your fpinfo partition? I need yours to compare with mine
Click to expand...
Click to collapse
Sure, I hope it helps.
gabriel6891 said:
Sure, I hope it helps.
Click to expand...
Click to collapse
Thanks, I checked, widevine L1 is not belong fpinfo, so poor cause mine is L3 with bootloader locked and google certificated
thien.nm2905 said:
Thanks, I checked, widevine L1 is not belong fpinfo, so poor cause mine is L3 with bootloader locked and google certificated
Click to expand...
Click to collapse
Mine wasn't WV1 as well, so I followed this tutorial, and got WV1 and OTA working.
gabriel6891 said:
Mine wasn't WV1 as well, so I followed this tutorial, and got WV1 and OTA working.
Click to expand...
Click to collapse
Ya, I did it, but not working for me, I had flashed rom with erased all option (my misstake)
thien.nm2905 said:
Ya, I did it, but not working for me, I had flashed rom with erased all option (my misstake)
Click to expand...
Click to collapse
Did you restore your serial number?
gabriel6891 said:
Did you restore your serial number?
Click to expand...
Click to collapse
Ya, I did it, same yours, replace with my serial on back side
I am wondering what is your Play Protect certified status after the OTA update?
Please, can anyone record us a video about Z14 on the TB-J716F ?
Thank you in advance !!
Does this wipe your internal storage?
supertory said:
Does this wipe your internal storage?
Click to expand...
Click to collapse
It's an incremental update. So , No
thien.nm2905 said:
Ya, I did it, but not working for me, I had flashed rom with erased all option (my misstake)
Click to expand...
Click to collapse
Man, you put me in doubt, I don't know if I selected the same option too .. How can I know ? Note that I never had to restore my SN, and it is still there. Does this mean that I did not do it ?
When I locked my bootloader I had L1 certificate. A week ago, I discovered that my widevine certificate downgraded to L3 and that the 'OEM CRYPTO API Version' moved to version 15 (it should be on v16) , so I tried to flash ZUI 14 thinking it would fix the problem but no it did not..
I then unlocked the bootloader downgraded back to ZUI 12 .211 , naturally the widevine certificate was still on L3 but the 'OEM CRYPTO API Version' upgraded back to v16 ! , I did all the manual updates up to ZUI13 .560 and I was still on v16. When I upgraded through OTA to ZUI 14 it downgraded back to v15. Locking the bootloader didn't fix the problem either ...
Can you unlock the bootloader after updating this rom?
gabriel6891 said:
Mine wasn't WV1 as well, so I followed this tutorial, and got WV1 and OTA working.
Click to expand...
Click to collapse
Which portion of the tutorial did you follow? I'm on zui14 but still WV3.
darrel_xda said:
Which portion of the tutorial did you follow? I'm on zui14 but still WV3.
Click to expand...
Click to collapse
I followed everything, from install to lock bootloader, but at the time, my ROM was on version 12.
I don't know if you can use it when already in zui14.
gabriel6891 said:
Upgrade Lenovo Xiaoxin P11 Pro 2021 to ZUI 14 via OTA (TB-J716F)
!!! ATTENTION !!!
I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.
Check list:
1. Have the tablet Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)
2. Stock ROM
3. Bootloader locked
4. All available OTAs installed, if you don't have it you can use the VPN described below until you get to 14.0.127.
How to do it:
1. Install Returnees vpn app
2. Log in using google account in the app
3. Select a free server from the list and connect, I used ShangHai(free)
4. Open System Update and check for Updates, it should show the version 14.0.127
5. Start the download, after starting go back to the VPN and disconnect, so you will have your full speed for the download and won't consume the quota on the VPN app.
6. Depois de terminar a atualização, instale o Google Services Framework 12 (Android 12+) , assim você terá de volta os serviços do Google
7. Se você não tiver a Play Store, instale-a por meio do Lenovo App Center que acompanha o dispositivo.
Notas:
1. Não perdi Widevine L1
2. Agora posso me conectar a redes 5g
3. O desempenho do tablet é muito melhor
Obrigado a @carlosfla21 e @titos88
View attachment 5768251
View attachment 5768253
Click to expand...
Click to collapse
Poderia fazer o backup da sua ROM atualizada com o QFIL e fazer o upload?
Bom pessoal, consegui fazer a atualização via OTA para ZUI 14 mesmo com bootloader desbloqueado seguindo as instruções. A ZUI 14 é horrivel, você perderá varias funções atualizando para ela como o PC-MODE, a Melhor versão é ZUI 13.